These nuts tighten when turned to the left. Use them with left-hand rods and screws to prevent counterclockwise-moving parts from loosening.

About half the height of standard-profile locknuts, these fit in spaces with low clearance. You can also use them as jam nuts by threading them against a hex nut to hold it in place. The nylon insert grips the screw to prevent loosening from moderate vibration without damaging threads. However, the insert may become brittle if exposed to high temperatures. These locknuts are reusable a handful of times, but the holding power decreases with each use.

About two-thirds the height of standard steel-insert locknuts, these fit in spaces with low clearance and offer the most secure hold of all our thin-profile locknuts. You can also use them as jam nuts by threading them against a hex nut to hold it in place. The tab on the insert stops the nut from rotating, even under extreme vibration. These locknuts are ideal for equipment with constant motion or jarring starts and stops, including conveyors, shakers, and compactors. In fact, they're so secure, they can even fasten components on roller-coasters. You can reuse them once or twice, but their holding power decreases after the first use, so you should use a new locknut for the strongest possible hold.