McMaster-Carr logo
    Filter by
    System of Measurement
    Hex Nut Profile
    Industrial Info Compare
    Thread Direction
    Industrial Info Compare
    Width
    Attribute Image
    Fastener Strength Grade/Class
    Industrial Info Compare
    Thread Spacing
    Industrial Info Snippet
    Thread Type
    Specifications Met
    Fastener Strength Rating
    DFARS Specialty Metals
    Industrial Info Compare
    U.S.–Mexico–Canada Agreement (USMCA) Qualifying
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    Drive Style
    Industrial Info Snippet
    Thumb Nut Profile
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    35 Products
    About Hex Nuts
    industrial info icon

    Choose a hex nut with the right profile, material, and strength for your application.

    Thin-Profile Hex Nuts

    About half the height of standard-profile nuts, these fit in spaces with low clearance. You can also use them as jam nuts by threading them against another hex nut to hold it in place.
    Medium-Strength Steel
    Image of Product. Front orientation. Hex Nuts. Thin-Profile Hex Nuts.
    These Grade 5 or Class 04 nuts are your go-to for fastening most machinery and equipment. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.
    Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.
    Steel—Best for dry environments since moisture will cause these nuts to rust.
    Material Certificate Icon
    Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
    Thread
    Size
    Wd.
    Ht.
    Fastener Strength
    Grade/Class
    Specs. Met
    Certificate Type
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Steel
    1/2"-20
    		3/4"5/16"SAE Grade 5
    		ASME B18.2.2Material Certificate
    		5094846A525000000
     
    Steel
    1/2"-20
    		3/4"5/16"SAE Grade 5
    		ASME B18.2.2Material Certificate
    		2594846A2100000
     
    High-Strength Steel
    Image of Product. Front orientation. Hex Nuts. Thin-Profile Hex Nuts.
    Rated Grade 8, Grade C, or Class 10, these nuts are about 25% stronger than medium-strength steel nuts. They are commonly used to fasten components in valves, pumps, motors, and other high-stress applications. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.
    Material Certificate—Nuts include a report with a traceable lot number and a description of their chemical and physical properties.
    Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.
    Zinc-Yellow-Chromate-Plated Steel—With a more durable finish than clear zinc plating, these nuts are suitable for most wet and outdoor environments. However, they won't hold up to the harsh chemicals that stainless steel can.
    Steel—Best for dry environments since moisture will cause these nuts to rust.
    Thread
    Size
    Wd.
    Ht.
    Fastener Strength
    Grade/Class
    Specs. Met
    Certificate Type
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Steel
    1/2"-20
    		3/4"5/16"SAE Grade 8
    		ASME B18.2.2—1092053A13000000
     
    Zinc-Yellow-Chromate-Plated Steel
    1/2"-20
    		3/4"5/16"SAE Grade 8
    		ASME B18.2.2Material Certificate
    		2593839A82500000
     
    Steel
    1/2"-20
    		3/4"5/16"SAE Grade 8
    		ASME B18.2.2—1092052A2100000
     
    Low-Strength Steel
    Image of Product. Front orientation. Hex Nuts. Thin-Profile Hex Nuts.
    Rated Grade 2, Class 6, or lower, these nuts are about half as strong as medium-strength nuts. They are suitable for light duty fastening applications, such as securing access panels. Use them with screws that have a similar strength rating to avoid stripping threads during installation.
    Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.
    Black-Oxide Steel—Typically chosen for their appearance, these nuts have a dark, matte coating to create a finished look. They offer minimal corrosion resistance, so they're best for dry environments.
    Steel—Best for dry environments since moisture will cause these nuts to rust.
    Thread
    Size
    Wd.
    Ht.
    Fastener Strength
    Grade/Class
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Steel
    1/2"-20
    		3/4"5/16"SAE Grade 2
    		5091078A22500000
     
    Black-Oxide Steel
    1/2"-20
    		3/4"3/16"—190475A0330000
     
    Steel
    1/2"-20
    		3/4"5/16"SAE Grade 2
    		10090494A23300000
     
    Corrosion-Resistant Stainless Steel
    Image of Product. Front orientation. Hex Nuts. Thin-Profile Hex Nuts.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these nuts resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.
    Black-Oxide 18-8 Stainless Steel—Typically chosen for their appearance, these nuts have a dark, matte coating to create a finished look. They resist rust in wet and outdoor environments, but won't hold up to the harsh chemicals that 316 stainless steel can.
    Highly Corrosion-Resistant 316 Stainless Steel—Superior to 18-8 stainless steel, these nuts won't degrade when exposed to harsh weather, salt water, and most chemicals.
    Highly Corrosion-Resistant Black-Oxide 316 Stainless Steel—Combines a finished appearance with the rust resistance of 316 stainless steel. Even if the coating wears off, these nuts will hold up in just about any environment, including salt water and most chemicals.
    Thread
    Size
    Wd.
    Ht.
    Certificate Type
    Pkg.
    Qty.
    Pkg.
    18-8 Stainless Steel
    1/2"-20
    		3/4"5/16"Material Certificate
    		2591847A52500000
     
    Black-Oxide 18-8 Stainless Steel
    1/2"-20
    		3/4"5/16"—1098514A1400000
     
    Highly Corrosion-Resistant 316 Stainless Steel
    1/2"-20
    		3/4"5/16"—1094805A2240000
     
    Highly Corrosion-Resistant Black-Oxide 316 Stainless Steel
    1/2"-20
    		3/4"5/16"—590831A18000000
     
    Brass
    Image of Product. Front orientation. Hex Nuts. Thin-Profile Hex Nuts.
    Brass—Conductive and nonmagnetic, brass nuts are commonly used to secure electrical equipment, such as circuit board assemblies and mounting brackets, inside enclosures. They're also softer than most metals, so they won't damage other fastening components.
    Thread
    Size
    Wd.
    Ht.
    Pkg.
    Qty.
    Pkg.
    Brass
    1/2"-20
    		3/4"5/16"1092174A440000000
     

    Left-Hand-Thread Hex Nuts

    Image of Product. Front orientation. Contains Annotated, MultipleImages. Hex Nuts. Left-Hand-Thread Hex Nuts.
    These nuts tighten when turned to the left. Use them with left-hand rods and screws to prevent counterclockwise-moving parts from loosening.
    Corrosion-Resistant Stainless Steel
    Highly Corrosion-Resistant 316 Stainless Steel—Superior to 18-8 stainless steel, these nuts won't degrade when exposed to harsh weather, salt water, and most chemicals.
    Thread
    Size
    Wd.
    Ht.
    Pkg.
    Qty.
    Pkg.
    Highly Corrosion-Resistant 316 Stainless Steel
    1/2"-20
    		3/4"7/16"195355A251000000
     

    Left-Hand-Thread Thin-Profile Hex Nuts

    These nuts tighten when turned to the left. Use them with left-hand rods and screws to prevent counterclockwise-moving parts from loosening. About half the height of standard-profile nuts, these fit in spaces with low clearance. You can also use them as jam nuts by threading them against another hex nut to hold it in place.
    Medium-Strength Steel
    Image of Product. Front orientation. Contains Annotated, MultipleImages. Hex Nuts. Left-Hand-Thread Thin-Profile Hex Nuts.
    These Grade 5 or Class 04 nuts are your go-to for fastening most machinery and equipment. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.
    Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.
    Material Certificate Icon
    Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
    Thread
    Size
    Wd.
    Ht.
    Fastener Strength
    Grade/Class
    Certificate Type
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Steel
    1/2"-20
    		3/4"5/16"SAE Grade 5
    		Material Certificate
    		2599612A136000000
     
    Low-Strength Steel
    Image of Product. Front orientation. Contains Annotated, MultipleImages. Hex Nuts. Left-Hand-Thread Thin-Profile Hex Nuts.
    Rated Grade 2, Class 6, or lower, these nuts are about half as strong as medium-strength nuts. They are suitable for light duty fastening applications, such as securing access panels. Use them with screws that have a similar strength rating to avoid stripping threads during installation.
    Black-Oxide Steel—Typically chosen for their appearance, these nuts have a dark, matte coating to create a finished look. They offer minimal corrosion resistance, so they're best for dry environments.
    Steel—Best for dry environments since moisture will cause these nuts to rust.
    Thread
    Size
    Wd.
    Ht.
    Fastener Strength
    Grade/Class
    Specs.
    Met
    Certificate Type
    Pkg.
    Qty.
    Pkg.
    Black-Oxide Steel
    1/2"-20
    		3/4"5/16"SAE Grade 2
    		ASTM A108Material Certificate
    		190519A87200000
     
    Steel
    1/2"-20
    		3/4"5/16"SAE Grade 2
    		——2590083A22500000
     
    Corrosion-Resistant Stainless Steel
    Image of Product. Front orientation. Contains Annotated, MultipleImages. Hex Nuts. Left-Hand-Thread Thin-Profile Hex Nuts.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these nuts resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.
    Highly Corrosion-Resistant 316 Stainless Steel—Superior to 18-8 stainless steel, these nuts won't degrade when exposed to harsh weather, salt water, and most chemicals.
    Thread
    Size
    Wd.
    Ht.
    Certificate Type
    Pkg.
    Qty.
    Pkg.
    18-8 Stainless Steel
    1/2"-20
    		3/4"5/16"—594450A280000000
     
    Highly Corrosion-Resistant 316 Stainless Steel
    1/2"-20
    		3/4"5/16"Material Certificate
    		193031A1720000
     

    Thin-Profile Nylon-Insert Locknuts

    Image of Product. Front orientation. Locknuts. Thin-Profile Nylon-Insert Locknuts.
    About half the height of standard-profile locknuts, these fit in spaces with low clearance. You can also use them as jam nuts by threading them against a hex nut to hold it in place. The nylon insert grips the screw to prevent loosening from moderate vibration without damaging threads. However, the insert may become brittle if exposed to high temperatures. These locknuts are reusable a handful of times, but the holding power decreases with each use.
    High-Strength Steel
    Rated Grade 8, Grade C, or Class 10, these locknuts are about 25% stronger than medium-strength steel nuts. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.
    Zinc-Yellow-Chromate-Plated Steel—With a more durable finish than clear zinc plating, these nuts are suitable for most wet and outdoor environments. However, they won't hold up to the harsh chemicals that stainless steel can.
    Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.
    Black-Oxide Steel—Typically chosen for their appearance, these nuts have a dark, matte coating to create a finished look. They offer minimal corrosion resistance, so they're best for dry environments.
    Thread
    Size
    Wd.
    Ht.
    Fastener Strength
    Grade/Class
    Insert Max.
    Temp., ° F
    Pkg.
    Qty.
    Pkg.
    Zinc-Yellow-Chromate-Plated Steel
    1/2"-20
    		3/4"5/16"SAE Grade 8
    		250594945A12100000
     
    Zinc-Plated Steel
    1/2"-20
    		3/4"5/16"SAE Grade 8
    		220594945A2250000
     
    Black-Oxide Steel
    1/2"-20
    		3/4"5/16"SAE Grade 8
    		250594945A1120000
     
    Low-Strength Steel
    Rated Grade 2, Class 6, or lower, these locknuts are about half as strong as medium-strength steel nuts. Use them with screws that have a similar strength rating to avoid stripping threads during installation.
    Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.
    Thread
    Size
    Wd.
    Ht.
    Insert Max.
    Temp., ° F
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Steel
    1/2"-20
    		3/4"5/16"22010090566A230000000
     
    Corrosion-Resistant Stainless Steel
    18-8 Stainless Steel—The choice for wet and outdoor environments, these locknuts resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.
    Black-Oxide 18-8 Stainless Steel—Typically chosen for their appearance, these nuts have a dark, matte coating to create a finished look. They resist rust in wet and outdoor environments, but won't hold up to the harsh chemicals that 316 stainless steel can.
    316 Stainless Steel—Our most corrosion-resistant nuts, these hold up in just about any environment. They won't degrade from exposure to weather, salt water, and most chemicals.
    Thread
    Size
    Wd.
    Ht.
    Insert Max.
    Temp., ° F
    Pkg.
    Qty.
    Pkg.
    18-8 Stainless Steel
    1/2"-20
    		3/4"5/16"220590101A25500000
     
    Black-Oxide 18-8 Stainless Steel
    1/2"-20
    		3/4"5/16"220590101A1260000
     
    316 Stainless Steel
    1/2"-20
    		3/4"5/16"2201097367A13700000
     

    Shock Absorber Mounting Nuts

    Image of Product. Front orientation. Shock Absorber Mounting Nuts. Hex Nuts.

    Hex Nuts

    Steel
    Thread
    Size
    Each
    Hex Nuts
    1/2"-20
    		6600K7500000
     

    Mil. Spec. Thin-Profile Hex Nuts

    These nuts are manufactured and tested to strict U.S. military standards for material and construction. About half the height of standard-profile nuts, they fit in spaces with low clearance. You can also use them as jam nuts by threading them against another hex nut to hold it in place.
    Material Certificate Icon
    Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
    Corrosion-Resistant Stainless Steel
    Image of Product. Front orientation. Hex Nuts. Mil. Spec. Thin-Profile Hex Nuts.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these nuts resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.
    Thread
    Size
    Wd.
    Ht.
    Mil. Spec.
    Certificate Type
    Pkg.
    Qty.
    Pkg.
    18-8 Stainless Steel
    1/2"-20
    		3/4"5/16"Fed. Spec. FF-N-836, MS35691-39Material Certificate
    		192101A98000000
     

    Thin-Profile Flex-Top Locknuts for Heavy Vibration

    Image of Product. Front orientation. Locknuts. Thin-Profile Flex-Top Locknuts for Heavy Vibration.
    About two-thirds the height of standard flex-top nuts, these fit in spaces with low clearance. You can also use them as jam nuts by threading them against a hex nut to hold it in place. The top section expands to grip the screw on all sides for a stronger hold than both nylon-insert and distorted-thread locknuts. As a result, they're suitable for use in equipment with constant, vigorous vibration, such as engines. These locknuts are reusable a handful of times, but the holding power decreases with each use.
    Steel
    These locknuts have equivalent strength to Grade 8 and Class 10 steel nuts. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.
    Cadmium-Plated Steel—These locknuts have good lubricity to thread on smoothly and ease installation. The plating also creates a barrier against rust that's comparable to zinc-yellow-chromate plating.
    Steel—Best for dry environments since moisture will cause these nuts to rust.
    Thread
    Size
    Wd.
    Ht.
    Pkg.
    Qty.
    Pkg.
    Cadmium-Plated Steel
    1/2"-20
    		3/4"21/64"594830A55000000
     
    Steel
    1/2"-20
    		3/4"21/64"194830A1350000
     
    Corrosion-Resistant Stainless Steel
    18-8 Stainless Steel—The choice for wet and outdoor environments, these locknuts resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.
    Thread
    Size
    Wd.
    Ht.
    Pkg.
    Qty.
    Pkg.
    18-8 Stainless Steel
    1/2"-20
    		3/4"21/64"194140A159000000
     

    Mil. Spec. Thin-Profile Nylon-Insert Locknuts

    Image of Product. Front orientation. Locknuts. Mil. Spec. Thin-Profile Nylon-Insert Locknuts.
    These locknuts are manufactured and tested to strict U.S. military standards for material and construction. They are about half the height of standard-profile locknuts to fit in spaces with low clearance. You can also use them as jam nuts by threading them against a hex nut to hold it in place. The nylon insert grips the screw to prevent loosening from moderate vibration without damaging threads. However, the insert may become brittle if exposed to high temperatures. These locknuts are reusable a handful of times, but the holding power decreases with each use.
    Low-Strength Steel
    Rated Grade 2, Class 6, or lower, these locknuts are about half as strong as medium-strength steel nuts. Use them with screws that have a similar strength rating to avoid stripping threads during installation.
    Cadmium Yellow-Chromate-Plated Steel—These locknuts have good lubricity to thread on smoothly and ease installation. The plating also creates a barrier against rust that's comparable to zinc-yellow-chromate plating.
    Material Certificate Icon
    Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
    Thread
    Size
    Wd.
    Ht.
    Mil. Spec.
    Insert Max.
    Temp., ° F
    Pkg.
    Qty.
    Pkg.
    Cadmium Yellow-Chromate-Plated Steel
    1/2"-20
    		3/4"5/16"MS21083N8, NASM21083250195496A38000000
     
    Corrosion-Resistant Stainless Steel
    18-8 Stainless Steel—The choice for wet and outdoor environments, these locknuts resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.
    Thread
    Size
    Wd.
    Ht.
    Mil. Spec.
    Insert Max.
    Temp., ° F
    Pkg.
    Qty.
    Pkg.
    18-8 Stainless Steel
    1/2"-20
    		3/4"5/16"MS21083C8, NASM21083250197231A490000000
     

    Knurled-Head Thumb Nuts

    Image of Attribute. Front orientation. Contains Annotated. Thumb Nuts. Knurled-Head Thumb Nuts.
    Get a good grip on these nuts, even with oily fingers. They have a raised, slip-resistant head, so you can tighten them by hand and make controlled adjustments. Knurled-head nuts have a smaller profile than wing nuts, so they fit in tighter spots.
    Corrosion-Resistant Stainless Steel
    18-8 Stainless Steel—The choice for wet and outdoor environments, these nuts resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.
    Black-Oxide 18-8 Stainless Steel—Typically chosen for their appearance, these nuts have a dark, matte coating to create a finished look. They resist rust in wet and outdoor environments, but won't hold up to the harsh chemicals that 316 stainless steel can.
    Collar
    Thread
    Size
    Dia.
    Ht.
    Head
    Dia.
    Ht.
    Threading
    Pkg.
    Qty.
    Pkg.
    18-8 Stainless Steel
    1/2"-20
    		5/8"3/4"1 1/8"15/16"Fully Threaded191833A147000000
     
    Black-Oxide 18-8 Stainless Steel
    1/2"-20
    		5/8"3/4"1 1/8"15/16"Fully Threaded192088A13300000
     
    back to top