McMaster-Carr logo
    Filter by
    System of Measurement
    Hex Nut Profile
    Industrial Info Compare
    Nut Type
    Industrial Info Compare
    Thread Direction
    Industrial Info Compare
    Thread Type
    Specifications Met
    Fastener Strength Rating
    Thread Spacing
    Industrial Info Snippet
    DFARS Specialty Metals
    Industrial Info Compare
    For Turnbuckle Material
    U.S.–Mexico–Canada Agreement (USMCA) Qualifying
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    Eye ID
    Attribute Image
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    55 Products
    About Hex Nuts
    industrial info icon

    Choose a hex nut with the right profile, material, and strength for your application.

    Thin-Profile Hex Nuts

    About half the height of standard-profile nuts, these fit in spaces with low clearance. You can also use them as jam nuts by threading them against another hex nut to hold it in place.
    Medium-Strength Steel
    Image of Product. Front orientation. Hex Nuts. Thin-Profile Hex Nuts.
    These Grade 5 or Class 04 nuts are your go-to for fastening most machinery and equipment. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.
    Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.
    Steel—Best for dry environments since moisture will cause these nuts to rust.
    Thread
    Size
    Wd.
    Ht.
    Fastener Strength
    Grade/Class
    Specs. Met
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Steel
    3/4"-10
    		1 1/8"27/64"SAE Grade 5
    		ASME B18.2.22094846A537000000
     
    Steel
    3/4"-10
    		1 1/8"27/64"SAE Grade 5
    		ASME B18.2.21094846A2150000
     
    High-Strength Steel
    Image of Product. Front orientation. Hex Nuts. Thin-Profile Hex Nuts.
    Rated Grade 8, Grade C, or Class 10, these nuts are about 25% stronger than medium-strength steel nuts. They are commonly used to fasten components in valves, pumps, motors, and other high-stress applications. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.
    Material Certificate—Nuts include a report with a traceable lot number and a description of their chemical and physical properties.
    Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.
    Zinc-Yellow-Chromate-Plated Steel—With a more durable finish than clear zinc plating, these nuts are suitable for most wet and outdoor environments. However, they won't hold up to the harsh chemicals that stainless steel can.
    Steel—Best for dry environments since moisture will cause these nuts to rust.
    Zinc-Flake-Coated Steel—The most durable zinc coating, zinc flake is a multilayer finish that resists wear for long-term rust protection. Similar to zinc yellow-chromate, it won't hold up to harsh chemicals like stainless steel can.
    Thread
    Size
    Wd.
    Ht.
    Fastener Strength
    Grade/Class
    Specs. Met
    Certificate Type
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Steel
    3/4"-10
    		1 1/8"27/64"SAE Grade 8
    		ASME B18.2.2—592053A15000000
     
    Zinc-Yellow-Chromate-Plated Steel
    3/4"-10
    		1 1/8"27/64"SAE Grade 8
    		ASME B18.2.2—1093839A83700000
     
    Steel
    3/4"-10
    		1 1/8"27/64"SAE Grade 8
    		ASME B18.2.2—1092052A24000000
     
    Zinc-Flake-Coated Steel
    3/4"-10
    		1 1/8"27/64"SAE Grade 8
    		ASME B18.2.2Material Certificate
    		1091935A16000000
     
    Low-Strength Steel
    Image of Product. Front orientation. Hex Nuts. Thin-Profile Hex Nuts.
    Rated Grade 2, Class 6, or lower, these nuts are about half as strong as medium-strength nuts. They are suitable for light duty fastening applications, such as securing access panels. Use them with screws that have a similar strength rating to avoid stripping threads during installation.
    Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.
    Black-Oxide Steel—Typically chosen for their appearance, these nuts have a dark, matte coating to create a finished look. They offer minimal corrosion resistance, so they're best for dry environments.
    Steel—Best for dry environments since moisture will cause these nuts to rust.
    Thread
    Size
    Wd.
    Ht.
    Fastener Strength
    Grade/Class
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Steel
    3/4"-10
    		1 1/8"27/64"SAE Grade 2
    		2591078A23800000
     
    Black-Oxide Steel
    3/4"-10
    		1 1/8"27/64"—1090475A16000000
     
    Steel
    3/4"-10
    		1 1/8"27/64"SAE Grade 2
    		5090494A13600000
     
    Corrosion-Resistant Stainless Steel
    Image of Product. Front orientation. Hex Nuts. Thin-Profile Hex Nuts.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these nuts resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.
    Black-Oxide 18-8 Stainless Steel—Typically chosen for their appearance, these nuts have a dark, matte coating to create a finished look. They resist rust in wet and outdoor environments, but won't hold up to the harsh chemicals that 316 stainless steel can.
    Highly Corrosion-Resistant 316 Stainless Steel—Superior to 18-8 stainless steel, these nuts won't degrade when exposed to harsh weather, salt water, and most chemicals.
    Highly Corrosion-Resistant Black-Oxide 316 Stainless Steel—Combines a finished appearance with the rust resistance of 316 stainless steel. Even if the coating wears off, these nuts will hold up in just about any environment, including salt water and most chemicals.
    Thread
    Size
    Wd.
    Ht.
    Certificate Type
    Pkg.
    Qty.
    Pkg.
    18-8 Stainless Steel
    3/4"-10
    		1 1/8"27/64"Material Certificate
    		1091847A55000000
     
    Black-Oxide 18-8 Stainless Steel
    3/4"-10
    		1 1/8"27/64"—198514A1600000
     
    Highly Corrosion-Resistant 316 Stainless Steel
    3/4"-10
    		1 1/8"27/64"—194805A1350000
     
    Highly Corrosion-Resistant Black-Oxide 316 Stainless Steel
    3/4"-10
    		1 1/8"27/64"—190831A2200000
     
    Lightweight Corrosion-Resistant Titanium
    Image of Product. Front orientation. Hex Nuts. Thin-Profile Hex Nuts.
    The best of both worlds, these hex nuts are lightweight like aluminum and more corrosion resistant than 316 stainless steel.
    Grade 2 Titanium—Because Grade 2 titanium is 99% pure, it's even more corrosion resistant than other common titanium grades, such as Grades 5 and 9. These nuts are ideal for use in chemical-processing and water-treatment facilities since they stand up to strong acids and other harsh chemicals.
    Thread
    Size
    Wd.
    Ht.
    Pkg.
    Qty.
    Pkg.
    Grade 2 Titanium
    3/4"-10
    		1 1/8"27/64"191907A160000000
     
    Bronze
    Image of Product. Front orientation. Hex Nuts. Thin-Profile Hex Nuts.
    Silicon Bronze—More resistant to salt water than brass, these nuts are a good choice for marine environments. They are also stronger than brass and more resistant to abrasion and wear. Choose them for machinery with rotating parts or other applications where nearby components may rub against the nut.
    Thread
    Size
    Wd.
    Ht.
    Specs. Met
    Pkg.
    Qty.
    Pkg.
    Silicon Bronze
    3/4"-10
    		1 1/8"27/64"ASME B18.2.2191952A16000000
     
    Brass
    Image of Product. Front orientation. Hex Nuts. Thin-Profile Hex Nuts.
    Brass—Conductive and nonmagnetic, brass nuts are commonly used to secure electrical equipment, such as circuit board assemblies and mounting brackets, inside enclosures. They're also softer than most metals, so they won't damage other fastening components.
    Thread
    Size
    Wd.
    Ht.
    Pkg.
    Qty.
    Pkg.
    Brass
    3/4"-10
    		1 1/8"27/64"592174A465000000
     
    Plastic
    Image of Product. Front orientation. Hex Nuts. Thin-Profile Hex Nuts.
    Nylon 6/6— The most common plastic nuts, these are good for general purpose fastening. They are slippery and abrasion resistant, so they thread on smoothly and stand up to daily wear and tear. Nylon will swell and weaken when exposed to moisture, so these nuts are best for dry environments.
    Temp.,
    ° F
    Thread
    Size
    Wd.
    Ht.
    Min.
    Max.
    Choose a Color
    Pkg.
    Qty.
    Pkg.
    Nylon 6/6
    3/4"-10
    		1 1/8"1/4"-40185Black, Off-White1096557A144000000
     

    Thin-Heavy-Profile Hex Nuts

    About half the height of standard-profile hex nuts and 10% wider, these fit in spaces with low clearance and handle heavier loads by distributing them over a larger area. You can also use them as jam nuts by threading them against another hex nut to hold it in place.
    Extreme-Strength Steel
    Image of Product. Front orientation. Hex Nuts. Thin-Heavy-Profile Hex Nuts.
    These nuts are about 20% stronger than high-strength steel nuts. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.
    Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.
    Steel—Best for dry environments since moisture will cause these nuts to rust.
    Thread
    Size
    Wd.
    Ht.
    Fastener Strength
    Grade/Class
    Specs. Met
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Steel
    3/4"-10
    		1 1/4"27/64"ASTM Grade 2H
    		ASME B18.2.2, ASTM A194591879A034000000
     
    Steel
    3/4"-10
    		1 1/4"27/64"ASTM Grade 2H
    		ASME B18.2.2, ASTM A194195010A1650000
     
    Low-Strength Steel
    Image of Product. Front orientation. Hex Nuts. Thin-Heavy-Profile Hex Nuts.
    Rated Grade 2, Class 6, or lower, these nuts are about half as strong as medium-strength nuts. They are suitable for light duty fastening applications, such as securing access panels. Use them with screws that have a similar strength rating to avoid stripping threads during installation.
    Black-Oxide Steel—Typically chosen for their appearance, these nuts have a dark, matte coating to create a finished look. They offer minimal corrosion resistance, so they're best for dry environments.
    Steel—Best for dry environments since moisture will cause these nuts to rust.
    Thread
    Size
    Wd.
    Ht.
    Fastener Strength
    Grade/Class
    Pkg.
    Qty.
    Pkg.
    Black-Oxide Steel
    3/4"-10
    		1 1/4"27/64"—591015A03600000
     
    Steel
    3/4"-10
    		1 1/4"27/64"SAE Grade 2
    		2590502A41500000
     
    Corrosion-Resistant Stainless Steel
    Image of Product. Front orientation. Hex Nuts. Thin-Heavy-Profile Hex Nuts.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these nuts resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.
    Thread
    Size
    Wd.
    Ht.
    Pkg.
    Qty.
    Pkg.
    18-8 Stainless Steel
    3/4"-10
    		1 1/4"27/64"191851A65000000
     
    Brass
    Image of Product. Front orientation. Hex Nuts. Thin-Heavy-Profile Hex Nuts.
    Brass—Conductive and nonmagnetic, brass nuts are commonly used to secure electrical equipment, such as circuit board assemblies and mounting brackets, inside enclosures. They're also softer than most metals, so they won't damage other fastening components.
    Thread
    Size
    Wd.
    Ht.
    Pkg.
    Qty.
    Pkg.
    Brass
    3/4"-10
    		1 1/4"27/64"192683A86500000
     

    Jam Nuts for Turnbuckles

    Tighten these nuts against the turnbuckle body to prevent the end fitting from unscrewing.
    For Steel Turnbuckles
    Image of Product. Front orientation. Turnbuckles. Jam Nuts for Turnbuckles.
    Left- and Right-Hand
    Thread Direction
    Thread
    Size
    Wd.
    Ht.
    Includes
    Each
    Grade 2 Steel
    3/4"-10
    		1 1/8"27/64"One Left-Hand Threaded Jam Nut, One Right-Hand Threaded Jam Nut2995T90200000
     
    For Galvanized Steel Turnbuckles
    Image of Product. Front orientation. Turnbuckles. Jam Nuts for Turnbuckles.
    Left- and Right-Hand
    Thread Direction
    Thread
    Size
    Wd.
    Ht.
    Includes
    Each
    Grade 2 Galvanized Steel
    3/4"-10
    		1 1/8"27/64"One Left-Hand Threaded Jam Nut, One Right-Hand Threaded Jam Nut3000T75700000
     
    For 316 Stainless Steel Turnbuckles
    Image of Product. Front orientation. Turnbuckles. Jam Nuts for Turnbuckles.
    Right-Hand
    Thread Direction
    Left-Hand
    Thread Direction
    Thread
    Size
    Wd.
    Ht.
    Each
    Each
    316 Stainless Steel
    3/4"-10
    		1 1/8"21/32"3022T7270000003022T717000000
     

    Thin-Profile Nylon-Insert Locknuts

    Image of Product. Front orientation. Locknuts. Thin-Profile Nylon-Insert Locknuts.
    About half the height of standard-profile locknuts, these fit in spaces with low clearance. You can also use them as jam nuts by threading them against a hex nut to hold it in place. The nylon insert grips the screw to prevent loosening from moderate vibration without damaging threads. However, the insert may become brittle if exposed to high temperatures. These locknuts are reusable a handful of times, but the holding power decreases with each use.
    Medium-Strength Steel
    These Grade 5 or Class 8 nuts are your go-to for fastening most machinery and equipment. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.
    Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.
    Thread
    Size
    Wd.
    Ht.
    Fastener Strength
    Grade/Class
    Insert Max.
    Temp., ° F
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Steel
    3/4"-10
    		1 1/16"13/32"SAE Grade 5
    		220591342A230000000
     
    Low-Strength Steel
    Rated Grade 2, Class 6, or lower, these locknuts are about half as strong as medium-strength steel nuts. Use them with screws that have a similar strength rating to avoid stripping threads during installation.
    Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.
    Thread
    Size
    Wd.
    Ht.
    Insert Max.
    Temp., ° F
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Steel
    3/4"-10
    		1 1/16"13/32"2201090566A24000000
     
    Corrosion-Resistant Stainless Steel
    18-8 Stainless Steel—The choice for wet and outdoor environments, these locknuts resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.
    316 Stainless Steel—Our most corrosion-resistant nuts, these hold up in just about any environment. They won't degrade from exposure to weather, salt water, and most chemicals.
    Material Certificate Icon
    Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
    Thread
    Size
    Wd.
    Ht.
    Insert Max.
    Temp., ° F
    Pkg.
    Qty.
    Pkg.
    18-8 Stainless Steel
    3/4"-10
    		1 1/16"13/32"220190101A05000000
     
    316 Stainless Steel
    3/4"-10
    		1 1/16"25/64"220197367A13100000
     

    Left-Hand-Thread Thin-Profile Hex Nuts

    Image of Product. Front orientation. Contains Annotated, MultipleImages. Hex Nuts. Left-Hand-Thread Thin-Profile Hex Nuts.
    These nuts tighten when turned to the left. Use them with left-hand rods and screws to prevent counterclockwise-moving parts from loosening. About half the height of standard-profile nuts, these fit in spaces with low clearance. You can also use them as jam nuts by threading them against another hex nut to hold it in place.
    Medium-Strength Steel
    These Grade 5 or Class 04 nuts are your go-to for fastening most machinery and equipment. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.
    Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.
    Thread
    Size
    Wd.
    Ht.
    Fastener Strength
    Grade/Class
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Steel
    3/4"-10
    		1 1/8"27/64"SAE Grade 5
    		1099612A162000000
     
    Low-Strength Steel
    Rated Grade 2, Class 6, or lower, these nuts are about half as strong as medium-strength nuts. They are suitable for light duty fastening applications, such as securing access panels. Use them with screws that have a similar strength rating to avoid stripping threads during installation.
    Steel—Best for dry environments since moisture will cause these nuts to rust.
    Thread
    Size
    Wd.
    Ht.
    Fastener Strength
    Grade/Class
    Pkg.
    Qty.
    Pkg.
    Steel
    3/4"-10
    		1 1/8"27/64"SAE Grade 2
    		1090083A240000000
     
    Corrosion-Resistant Stainless Steel
    18-8 Stainless Steel—The choice for wet and outdoor environments, these nuts resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.
    Highly Corrosion-Resistant 316 Stainless Steel—Superior to 18-8 stainless steel, these nuts won't degrade when exposed to harsh weather, salt water, and most chemicals.
    Thread
    Size
    Wd.
    Ht.
    Pkg.
    Qty.
    Pkg.
    18-8 Stainless Steel
    3/4"-10
    		1 1/8"27/64"194450A33100000
     
    Highly Corrosion-Resistant 316 Stainless Steel
    3/4"-10
    		1 1/8"27/64"193031A17700000
     
    Brass
    Brass—Conductive and nonmagnetic, brass nuts are commonly used to secure electrical equipment, such as circuit board assemblies and mounting brackets, inside enclosures. They're also softer than most metals, so they won't damage other fastening components.
    Thread
    Size
    Wd.
    Ht.
    Each
    Brass
    3/4"-10
    		1 1/8"27/64"92117A790000000
     

    Thin-Profile Steel-Insert Locknuts for Extreme Vibration

    Image of Product. Bottom orientation. Locknuts. Thin-Profile Steel-Insert Locknuts for Extreme Vibration.
    About two-thirds the height of standard steel-insert locknuts, these fit in spaces with low clearance and offer the most secure hold of all our thin-profile locknuts. You can also use them as jam nuts by threading them against a hex nut to hold it in place. The tab on the insert stops the nut from rotating, even under extreme vibration. These locknuts are ideal for equipment with constant motion or jarring starts and stops, including conveyors, shakers, and compactors. In fact, they're so secure, they can even fasten components on roller-coasters. You can reuse them once or twice, but their holding power decreases after the first use, so you should use a new locknut for the strongest possible hold.
    High-Strength Steel
    Rated Grade 8, Grade C, or Class 10, these locknuts are about 25% stronger than medium-strength steel nuts. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.
    Steel—Best for dry environments since moisture will cause these nuts to rust.
    Thread
    Size
    Wd.
    Ht.
    Fastener Strength
    Grade/Class
    Each
    Steel
    3/4"-10
    		1 1/8"9/16"SAE Grade 8
    		90619A16700000
     

    Thin-Heavy-Profile Nylon-Insert Locknuts

    Image of Product. Front orientation. Locknuts. Thin-Heavy-Profile Nylon-Insert Locknuts.
    About half the height of standard-profile locknuts and 10% wider, these fit in spaces with low clearance and handle heavier loads by distributing them over a larger area. You can also use them as jam nuts by threading them against a hex nut to hold it in place. The nylon insert grips the screw to prevent loosening from moderate vibration without damaging threads. However, the insert may become brittle if exposed to high temperatures. These locknuts are reusable a handful of times, but the holding power decreases with each use.
    Low-Strength Steel
    Rated Grade 2, Class 6, or lower, these locknuts are about half as strong as medium-strength steel nuts. Use them with screws that have a similar strength rating to avoid stripping threads during installation.
    Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.
    Thread
    Size
    Wd.
    Ht.
    Insert Max.
    Temp., ° F
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Steel
    3/4"-10
    		1 1/4"45/64"2501090652A060000000
     
    Corrosion-Resistant Stainless Steel
    18-8 Stainless Steel—The choice for wet and outdoor environments, these locknuts resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.
    316 Stainless Steel—Our most corrosion-resistant nuts, these hold up in just about any environment. They won't degrade from exposure to weather, salt water, and most chemicals.
    Thread
    Size
    Wd.
    Ht.
    Insert Max.
    Temp., ° F
    Pkg.
    Qty.
    Pkg.
    18-8 Stainless Steel
    3/4"-10
    		1 1/4"45/64"250190098A036000000
     
    316 Stainless Steel
    3/4"-10
    		1 1/4"45/64"250194530A11900000
     

    Thin-Heavy-Profile Flex-Top Locknuts for Heavy Vibration

    Image of Product. Front orientation. Locknuts. Thin-Heavy-Profile Flex-Top Locknuts for Heavy Vibration.
    About two-thirds the height of standard flex-top nuts and 10% wider, these fit in spaces with low clearance and handle heavier loads by distributing them over a larger area. Because of the thin profile, you can also use them as jam nuts by threading them against a hex nut to hold it in place. The top section expands to grip the screw on all sides for a stronger hold than both nylon-insert and distorted-thread locknuts. As a result, they're suitable for use in equipment with constant, vigorous vibration, such as engines. These locknuts are reusable a handful of times, but the holding power decreases with each use.
    Steel
    These locknuts have equivalent strength to Grade 8 and Class 10 steel nuts. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.
    Cadmium-Plated Steel—These locknuts have good lubricity to thread on smoothly and ease installation. The plating also creates a barrier against rust that's comparable to zinc-yellow-chromate plating.
    Thread
    Size
    Wd.
    Ht.
    Pkg.
    Qty.
    Pkg.
    Cadmium-Plated Steel
    3/4"-10
    		1 1/8"27/64"194828A036000000
     

    Thin-Profile Flex-Top Locknuts for Heavy Vibration

    Image of Product. Front orientation. Locknuts. Thin-Profile Flex-Top Locknuts for Heavy Vibration.
    About two-thirds the height of standard flex-top nuts, these fit in spaces with low clearance. You can also use them as jam nuts by threading them against a hex nut to hold it in place. The top section expands to grip the screw on all sides for a stronger hold than both nylon-insert and distorted-thread locknuts. As a result, they're suitable for use in equipment with constant, vigorous vibration, such as engines. These locknuts are reusable a handful of times, but the holding power decreases with each use.
    Steel
    These locknuts have equivalent strength to Grade 8 and Class 10 steel nuts. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.
    Cadmium-Plated Steel—These locknuts have good lubricity to thread on smoothly and ease installation. The plating also creates a barrier against rust that's comparable to zinc-yellow-chromate plating.
    Steel—Best for dry environments since moisture will cause these nuts to rust.
    Thread
    Size
    Wd.
    Ht.
    Pkg.
    Qty.
    Pkg.
    Cadmium-Plated Steel
    3/4"-10
    		1 1/16"27/64"194830A57000000
     
    Steel
    3/4"-10
    		1 1/16"27/64"194830A1380000
     

    Clevis End Fittings for Turnbuckles—Not for Lifting

    Image of Attribute. Side1 orientation. ZoomedIn view. Contains Annotated. Turnbuckles. Clevis End Fittings for Turnbuckles—Not for Lifting.
    Forged 316 Stainless Steel
    Image of Product. Bolt and Cotter Pin Closure. Front orientation. Bolt Closure. Clevis End Fittings for Turnbuckles—Not for Lifting.

    Bolt and Cotter

    Pin Closure

    Forged fittings are stronger than cast and wire drawn fittings.
    316 stainless steel fittings are the most corrosion resistant and have excellent resistance to chemicals and salt water.
    Clevis Pin
    Right-Hand
    Thread Direction
    Left-Hand
    Thread Direction
    Wt. Cap.,
    lb.
    Dia.
    Closure Method
    Clevis
    Inside Wd.
    Thread
    Size
    Thread
    Lg.
    Overall
    Lg.
    Each
    Each
    5,2005/8"Bolt, Cotter Pin1"3/4"-10
    		4 5/8"8 3/8"3022T84100000003022T8330000000
     
    Cast 316 Stainless Steel
    Image of Product. Front orientation. Turnbuckles. Clevis End Fittings for Turnbuckles—Not for Lifting, Cotter Ring Closure.

    Cotter Ring

    Closure

    316 stainless steel fittings are the most corrosion resistant and have excellent resistance to chemicals and salt water.
    Clevis
    Pin
    Right-Hand
    Thread Direction
    Left-Hand
    Thread Direction
    Wt. Cap.,
    lb.
    Dia.
    Closure
    Method
    Clevis
    Inside Wd.
    Thread
    Size
    Thread
    Lg.
    Overall
    Lg.
    Each
    Each
    3,5003/4"Cotter Ring7/8"3/4"-10
    		6 9/16"10"30315T907000000030315T8970000000
     

    Eye End Fittings for Turnbuckles—Not for Lifting

    Forged 316 Stainless Steel
    Image of Specification. Front orientation. Contains Annotated. Eye End Fittings for Turnbuckles—Not for Lifting, Oval Eye.

    Oval Eye

    Forged fittings are stronger than wire drawn fittings.
    316 stainless steel is the most corrosion resistant and has excellent resistance to chemicals and salt water.
    Oval Eye—Oval eyes provide more room to attach connectors.
    Right-Hand
    Thread Direction
    Left-Hand
    Thread Direction
    Wt. Cap.,
    lb.
    Eye
    Shape
    Eye
    ID
    Eye Inside
    Lg.
    Thread
    Size
    Thread
    Lg.
    Overall
    Lg.
    Each
    Each
    5,200Oval1"2"3/4"-10
    		4 3/4"8 3/4"3022T8240000003022T816000000
     
    Welded 316 Stainless Steel
    Image of Specification. Front orientation. Contains Annotated. Eye End Fittings for Turnbuckles—Not for Lifting, Round Eye.

    Round Eye

    316 stainless steel is the most corrosion resistant and has excellent resistance to chemicals and salt water.
    Right-Hand
    Thread Direction
    Left-Hand
    Thread Direction
    Wt. Cap.,
    lb.
    Eye
    Shape
    Eye
    ID
    Thread
    Size
    Thread
    Lg.
    Overall
    Lg.
    Each
    Each
    3,500Round1 1/8"3/4"-10
    		6 1/4"9 3/16"30315T92500000030315T917000000
     

    Hook End Fittings for Turnbuckles—Not for Lifting

    Forged 316 Stainless Steel
    Image of Attribute. Front orientation. Contains Annotated.
    Forged fittings are stronger than cast and wire drawn fittings.
    316 stainless steel fittings are the most corrosion resistant and have excellent resistance to chemicals and salt water.
    Right-Hand
    Thread Direction
    Left-Hand
    Thread Direction
    Wt. Cap.,
    lb.
    Hook Opening
    Wd.
    Thread
    Size
    Thread
    Lg.
    Overall
    Lg.
    Each
    Each
    2,00015/16"3/4"-10
    		5.92"8 15/16"3022T8750000003022T867000000
     

    Unthreaded Stub End Fittings for Turnbuckles—Not for Lifting

    Image of Attribute. Front orientation. Contains Annotated. Turnbuckles. Unthreaded Stub End Fittings for Turnbuckles—Not for Lifting.
    Weld these stubs to parts or use them to push objects apart instead of pulling them together.
    316 Stainless Steel
    316 stainless steel fittings are the most corrosion resistant and have excellent resistance to chemicals and salt water.
    Stub
    Right-Hand
    Thread Direction
    Left-Hand
    Thread Direction
    Wt. Cap.,
    lb.
    Dia.
    Lg.
    Thread
    Size
    Thread
    Lg.
    Overall
    Lg.
    Each
    Each
    5,2003/4"3"3/4"-10
    		5"8"3022T8560000003022T848000000
     
    back to top