These nuts tighten when turned to the left. Use them with left-hand rods and screws to prevent counterclockwise-moving parts from loosening.

About half the height of standard-profile locknuts, these fit in spaces with low clearance. You can also use them as jam nuts by threading them against a hex nut to hold it in place. The nylon insert grips the screw to prevent loosening from moderate vibration without damaging threads. However, the insert may become brittle if exposed to high temperatures. These locknuts are reusable a handful of times, but the holding power decreases with each use.

These nuts are manufactured and tested to strict U.S. military standards for material and construction. About half the height of standard-profile nuts, they fit in spaces with low clearance. You can also use them as jam nuts by threading them against another hex nut to hold it in place.

About two-thirds the height of standard steel-insert locknuts, these fit in spaces with low clearance and offer the most secure hold of all our thin-profile locknuts. You can also use them as jam nuts by threading them against a hex nut to hold it in place. The tab on the insert stops the nut from rotating, even under extreme vibration. These locknuts are ideal for equipment with constant motion or jarring starts and stops, including conveyors, shakers, and compactors. In fact, they're so secure, they can even fasten components on roller-coasters. You can reuse them once or twice, but their holding power decreases after the first use, so you should use a new locknut for the strongest possible hold.

About half the height of standard-profile locknuts and 10% wider, these fit in spaces with low clearance and handle heavier loads by distributing them over a larger area. You can also use them as jam nuts by threading them against a hex nut to hold it in place. The nylon insert grips the screw to prevent loosening from moderate vibration without damaging threads. However, the insert may become brittle if exposed to high temperatures. These locknuts are reusable a handful of times, but the holding power decreases with each use.

These nuts tighten when turned to the left. Use them with left-hand rods and screws to prevent counterclockwise-moving parts from loosening. About half the height of standard-profile nuts, these fit in spaces with low clearance. You can also use them as jam nuts by threading them against another hex nut to hold it in place.

Twist the slip-resistant head by hand, then insert a T-handle hex key into one of the holes to apply extra torque for a tight fit. Nuts have a low-profile head that fits into cramped spaces. You can also use them as jam nuts by threading them against another nut to hold it in place.

Twist these thumb nuts into spaces without a lot of clearance. They have a short, slip-resistant head, so you can grip them easily and make controlled adjustments in cramped spots. You can also use them as jam nuts by threading them against another nut to hold it in place.

About two-thirds the height of standard flex-top nuts and 10% wider, these fit in spaces with low clearance and handle heavier loads by distributing them over a larger area. Because of the thin profile, you can also use them as jam nuts by threading them against a hex nut to hold it in place. The top section expands to grip the screw on all sides for a stronger hold than both nylon-insert and distorted-thread locknuts. As a result, they're suitable for use in equipment with constant, vigorous vibration, such as engines. These locknuts are reusable a handful of times, but the holding power decreases with each use.

About two-thirds the height of standard flex-top nuts, these fit in spaces with low clearance. You can also use them as jam nuts by threading them against a hex nut to hold it in place. The top section expands to grip the screw on all sides for a stronger hold than both nylon-insert and distorted-thread locknuts. As a result, they're suitable for use in equipment with constant, vigorous vibration, such as engines. These locknuts are reusable a handful of times, but the holding power decreases with each use.