Half as thick as regular hex nuts, these metric nuts fit into spaces with low height clearances. They’re a good choice for fastening most machinery and equipment. Also known as jam nuts, they can be threaded together to form a locknut that won’t move or loosen due to vibration. When fastening threaded rod, you can use two nuts to create a point for tightening the rod with a wrench. These nuts have less tensile strength than a standard hex nut when used alone. Made of steel, they’re best for dry environments, since moisture and chemicals will cause them to rust.

Zinc- and zinc yellow-chromate plated steel nuts resist corrosion in wet environments.

ISO 4035 (formerly DIN 439B) nuts are chamfered, so their edges are less sharp than DIN 936 nuts. This new ISO standard is functionally the same as the DIN standard it replaced, with slightly different tolerances for width.

For technical drawings and 3-D models, click on a part number.

Useful in low-clearance applications, these metric nuts are roughly half the height of standard hex nuts, but aren’t as strong. Commonly used as locknuts, threading a thin nut against any other hex nut prevents loosening caused by vibration. You can also use them as jam nuts by threading two of these thin nuts against each other on a threaded rod to create a gripping point for turning the rod without damaging its threads. All are 18-8 stainless steel, which is nearly as strong as steel but won’t rust in outdoor, washdown, and other corrosive environments.

ISO 4035 nuts are functionally the same as DIN 439B nuts (sometimes called DIN 439-2), but have slightly different width tolerances. These nuts have chamfered edges that make them less sharp than DIN 936 nuts.

For technical drawings and 3-D models, click on a part number.

These metric nuts are made of 316 stainless steel and half as tall as regular hex nuts—use them around chemicals and salt water when space is limited. Also known as jam nuts, they can be tightened in pairs to prevent loosening from vibration. Jamming two of these nuts together can also create a gripping point on a threaded rod, letting you use a wrench to turn the rod without damaging the threads.

ISO 4035 (formerly DIN 439B) nuts are chamfered, so their edges are less sharp than DIN 936 nuts. This new ISO standard is functionally the same as the DIN standard it replaced, with slightly different tolerances for width.

For technical drawings and 3-D models, click on a part number.

Made from brass, these metric nuts are corrosion resistant in wet environments, electrically conductive, and nonmagnetic. About half the height of standard hex nuts, they are useful in low-clearance applications but have less tensile strength. Also known as jam nuts, they help prevent loosening from vibration when tightened in pairs. Two nuts jammed together also function as a gripping point on a threaded rod, so you can turn the rod without damaging the threads.

Nickel-plated brass nuts have excellent resistance to chemicals and salt water.

DIN 439B nuts are chamfered, so their edges are less sharp than DIN 936 nuts. DIN 439B was replaced by ISO 4035 but remains a common reference point. The ISO standard has slightly different tolerances for width.

For technical drawings and 3-D models, click on a part number.