McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    39 Products

    Left-Hand-Thread Hex Nuts
    3D CAD models available

    These nuts tighten when turned to the left. Use them with left-hand rods and screws to prevent counterclockwise-moving parts from loosening.
    Corrosion-Resistant Stainless Steel
    Image of Product. Front orientation. Contains Annotated, MultipleImages. Hex Nuts. Left-Hand-Thread Hex Nuts.
    Super-Corrosion-Resistant 316 Stainless Steel—Superior to 18-8 stainless steel, these nuts won't degrade when exposed to harsh weather, salt water, and most chemicals.
    Thread
    Size
    Wd.
    Ht.
    Pkg.
    Qty.
    Pkg.
    Super-Corrosion-Resistant 316 Stainless Steel
    1"-14
    		1 1/2"55/64"1000000000000000
     

    Thin-Profile Hex Nuts
    3D CAD models available

    Image of Product. Front orientation. Hex Nuts. Thin-Profile Hex Nuts.
    About half the height of standard-profile nuts, these fit in spaces with low clearance. You can also use them as jam nuts by threading them against another hex nut to hold it in place.
    Medium-Strength Steel
    These Grade 5 or Class 04 nuts are your go-to for fastening most machinery and equipment. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.
    Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.
    Steel—Best for dry environments since moisture will cause these nuts to rust.
    Thread
    Size
    Wd.
    Ht.
    Fastener Strength
    Grade/Class
    Specs. Met
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Steel
    1"-14
    		1 1/2"35/64"SAE Grade 5
    		ASME B18.2.25000000000000000
     
    Steel
    1"-14
    		1 1/2"35/64"SAE Grade 5
    		ASME B18.2.210000000000000
     
    High-Strength Steel
    Rated Grade 8, Grade C, or Class 10, these nuts are about 25% stronger than medium-strength steel nuts. They are commonly used to fasten components in valves, pumps, motors, and other high-stress applications. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.
    Zinc Yellow-Chromate-Plated Steel—With a more durable finish than clear zinc plating, these nuts are suitable for most wet and outdoor environments. However, they won't hold up to the harsh chemicals that stainless steel can.
    Steel—Best for dry environments since moisture will cause these nuts to rust.
    Thread
    Size
    Wd.
    Ht.
    Fastener Strength
    Grade/Class
    Specs. Met
    Pkg.
    Qty.
    Pkg.
    Zinc Yellow-Chromate-Plated Steel
    1"-14
    		1 1/2"35/64"SAE Grade 8
    		ASME B18.2.25000000000000000
     
    Steel
    1"-14
    		1 1/2"35/64"SAE Grade 8
    		ASME B18.2.210000000000000
     
    Low-Strength Steel
    Rated Grade 2, Class 6, or lower, these nuts are about half as strong as medium-strength nuts. They are suitable for light duty fastening applications, such as securing access panels. Use them with screws that have a similar strength rating to avoid stripping threads during installation.
    Black-Oxide Steel—Typically chosen for their appearance, these nuts have a dark, matte coating to create a finished look. They offer minimal corrosion resistance, so they're best for dry environments.
    Steel—Best for dry environments since moisture will cause these nuts to rust.
    Thread
    Size
    Wd.
    Ht.
    Fastener Strength
    Grade/Class
    Pkg.
    Qty.
    Pkg.
    Black-Oxide Steel
    1"-14
    		1 1/2"3/8"__100000000000000
     
    Steel
    1"-14
    		1 1/2"35/64"SAE Grade 2
    		1000000000000000
     
    Corrosion-Resistant Stainless Steel
    18-8 Stainless Steel—The choice for wet and outdoor environments, these nuts resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.
    Super-Corrosion-Resistant 316 Stainless Steel—Superior to 18-8 stainless steel, these nuts won't degrade when exposed to harsh weather, salt water, and most chemicals.
    Thread
    Size
    Wd.
    Ht.
    Pkg.
    Qty.
    Pkg.
    18-8 Stainless Steel
    1"-14
    		1 1/2"35/64"100000000000000
     
    Super-Corrosion-Resistant 316 Stainless Steel
    1"-14
    		1 1/2"35/64"10000000000000
     
    Brass
    Brass—Conductive and nonmagnetic, brass nuts are commonly used to secure electrical equipment, such as circuit board assemblies and mounting brackets, inside enclosures. They're also softer than most metals, so they won't damage other fastening components.
    Thread
    Size
    Wd.
    Ht.
    Pkg.
    Qty.
    Pkg.
    Brass
    1"-14
    		1 1/2"35/64"100000000000000
     

    Left-Hand-Thread Thin-Profile Hex Nuts
    3D CAD models available

    These nuts tighten when turned to the left. Use them with left-hand rods and screws to prevent counterclockwise-moving parts from loosening. About half the height of standard-profile nuts, these fit in spaces with low clearance. You can also use them as jam nuts by threading them against another hex nut to hold it in place.
    Medium-Strength Steel
    Image of Product. Front orientation. Contains Annotated, MultipleImages. Hex Nuts. Left-Hand-Thread Thin-Profile Hex Nuts.
    These Grade 5 or Class 04 nuts are your go-to for fastening most machinery and equipment. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.
    Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.
    Thread
    Size
    Wd.
    Ht.
    Fastener Strength
    Grade/Class
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Steel
    1"-14
    		1 1/2"35/64"SAE Grade 5
    		100000000000000
     
    Low-Strength Steel
    Image of Product. Front orientation. Contains Annotated, MultipleImages. Hex Nuts. Left-Hand-Thread Thin-Profile Hex Nuts.
    Rated Grade 2, Class 6, or lower, these nuts are about half as strong as medium-strength nuts. They are suitable for light duty fastening applications, such as securing access panels. Use them with screws that have a similar strength rating to avoid stripping threads during installation.
    Steel—Best for dry environments since moisture will cause these nuts to rust.
    Thread
    Size
    Wd.
    Ht.
    Fastener Strength
    Grade/Class
    Pkg.
    Qty.
    Pkg.
    Steel
    1"-14
    		1 1/2"35/64"SAE Grade 2
    		5000000000000000
     
    Corrosion-Resistant Stainless Steel
    Image of Product. Front orientation. Contains Annotated, MultipleImages. Hex Nuts. Left-Hand-Thread Thin-Profile Hex Nuts.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these nuts resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.
    Super-Corrosion-Resistant 316 Stainless Steel—Superior to 18-8 stainless steel, these nuts won't degrade when exposed to harsh weather, salt water, and most chemicals.
    Thread
    Size
    Wd.
    Ht.
    Specs. Met
    Pkg.
    Qty.
    Pkg.
    18-8 Stainless Steel
    1"-14
    		1 1/2"35/64"ASME B18.2.21000000000000000
     
    Super-Corrosion-Resistant 316 Stainless Steel
    1"-14
    		1 1/2"35/64"__100000000000000
     
    Brass
    Image of Product. Front orientation. Contains Annotated, MultipleImages. Hex Nuts. Left-Hand-Thread Thin-Profile Hex Nuts.
    Brass—Conductive and nonmagnetic, brass nuts are commonly used to secure electrical equipment, such as circuit board assemblies and mounting brackets, inside enclosures. They're also softer than most metals, so they won't damage other fastening components.
    Thread
    Size
    Wd.
    Ht.
    Each
    Brass
    1"-14
    		1 1/2"35/64"000000000000000
     

    Brass Hex Panel Nuts
    3D CAD models available

    Image of Product. Front orientation. Panel Nuts. Brass Hex Panel Nuts.
    These panel nuts are corrosion resistant in wet environments, electrically conductive, and nonmagnetic. They can be fastened with a wrench for more torque while tightening than knurled panel nuts. Also known as dress nuts, they're extremely thin for use in tight spaces such as electrical panels.
    UNS ThreadAbout UNS Thread
    Nickel-Plated Brass—Nickel-plated brass panel nuts have excellent resistance to chemicals and salt water.
    Thread
    Size
    Wd.
    Ht.
    Pkg.
    Qty.
    Pkg.
    Brass
    5/8"-27
    		3/4"1/8"100000000000000
     
    Nickel-Plated Brass
    1/4"-40
    		5/16"1/16"100000000000000
    5/8"-27
    		3/4"1/8"10000000000000
     

    Stainless Steel Hex Panel Nuts
    3D CAD models available

    Image of Product. Front orientation. Panel Nuts. Stainless Steel Hex Panel Nuts.
    All of these stainless steel panel nuts have some chemical resistance. They can be fastened with a wrench for more torque while tightening than knurled panel nuts. Also known as dress nuts, they are extremely thin for use in tight spaces such as electrical panels.
    UNS ThreadAbout UNS Thread
    18-8 Stainless Steel—18-8 stainless steel nuts have good chemical resistance. They may be mildly magnetic.
    Black-Oxide 18-8 Stainless Steel—Black-oxide 18-8 stainless steel nuts have a dark surface color.
    316 Stainless Steel—316 stainless steel nuts have excellent chemical resistance and can be used in saltwater environments.
    Thread
    Size
    Wd.
    Ht.
    Pkg.
    Qty.
    Pkg.
    18-8 Stainless Steel
    1/4"-40
    		5/16"1/16"1000000000000000
    1/4"-40
    		5/8"3/16"10000000000000
    5/8"-27
    		3/4"1/8"10000000000000
     
    Black-Oxide 18-8 Stainless Steel
    1/4"-40
    		5/8"3/16"10000000000000
    5/8"-27
    		3/4"1/8"10000000000000
     
    316 Stainless Steel
    1/4"-40
    		5/8"3/16"10000000000000
    5/8"-27
    		3/4"1/8"10000000000000
     

    Steel Hex Panel Nuts
    3D CAD models available

    Image of Product. Front orientation. Panel Nuts. Steel Hex Panel Nuts.
    Fasten these panel nuts with a wrench for more torque while tightening than knurled panel nuts. Also known as dress nuts, they're extremely thin for use in tight spaces such as electrical panels.
    UNS ThreadAbout UNS Thread
    Zinc-Plated Steel—Zinc-plated steel nuts resist corrosion in wet environments.
    Black-Oxide Steel—Black-oxide steel nuts have a dark surface color.
    Thread
    Size
    Wd.
    Ht.
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Steel
    1/4"-40
    		5/8"3/16"100000000000000
    5/8"-27
    		3/4"1/8"10000000000000
     
    Black-Oxide Steel
    1/4"-40
    		5/16"1/16"10000000000000
    1/4"-40
    		5/8"3/16"10000000000000
    5/8"-27
    		3/4"1/8"10000000000000
     

    Steel Round Knurled-Head-Grip Panel Nuts
    3D CAD models available

    Image of Product. Front orientation. Panel Nuts. Steel Round Knurled-Head-Grip Panel Nuts.
    These panel nuts are knurled to provide a secure grip for tightening and loosening by hand. Also known as dress nuts, they're extremely thin for use in tight spaces such as electrical panels. They're zinc plated to resist corrosion in wet environments.
    UNS ThreadAbout UNS Thread
    Thread
    Size
    Dia.
    Ht.
    Each
    Zinc-Plated Steel
    5/8"-27
    		3/4"1/8"00000000000000
     

    Thin-Profile Nylon-Insert Locknuts
    3D CAD models available

    Image of Product. Front orientation. Locknuts. Thin-Profile Nylon-Insert Locknuts.
    About half the height of standard-profile locknuts, these fit in spaces with low clearance. You can also use them as jam nuts by threading them against a hex nut to hold it in place. The nylon insert grips the screw to prevent loosening from moderate vibration without damaging threads. However, the insert may become brittle if exposed to high temperatures. These locknuts are reusable a handful of times, but the holding power decreases with each use.
    High-Strength Steel
    Rated Grade 8, Grade C, or Class 10, these locknuts are about 25% stronger than medium-strength steel nuts. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.
    Zinc Yellow-Chromate-Plated Steel—With a more durable finish than clear zinc plating, these nuts are suitable for most wet and outdoor environments. However, they won't hold up to the harsh chemicals that stainless steel can.
    Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.
    Black-Oxide Steel—Typically chosen for their appearance, these nuts have a dark, matte coating to create a finished look. They offer minimal corrosion resistance, so they're best for dry environments.
    Thread
    Size
    Wd.
    Ht.
    Fastener Strength
    Grade/Class
    Insert Max.
    Temp., ° F
    Pkg.
    Qty.
    Pkg.
    Zinc Yellow-Chromate-Plated Steel
    1"-14
    		1 7/16"35/64"SAE Grade 8
    		250100000000000000
     
    Zinc-Plated Steel
    1"-14
    		1 7/16"35/64"SAE Grade 8
    		22010000000000000
     
    Black-Oxide Steel
    1"-14
    		1 7/16"35/64"SAE Grade 8
    		25010000000000000
     
    Medium-Strength Steel
    These Grade 5 or Class 8 nuts are your go-to for fastening most machinery and equipment. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.
    Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.
    Thread
    Size
    Wd.
    Ht.
    Fastener Strength
    Grade/Class
    Insert Max.
    Temp., ° F
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Steel
    1"-14
    		1 7/16"35/64"SAE Grade 5
    		220100000000000000
     
    Low-Strength Steel
    Rated Grade 2, Class 6, or lower, these locknuts are about half as strong as medium-strength steel nuts. Use them with screws that have a similar strength rating to avoid stripping threads during installation.
    Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.
    Thread
    Size
    Wd.
    Ht.
    Insert Max.
    Temp., ° F
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Steel
    1"-14
    		1 7/16"35/64"220100000000000000
     
    Corrosion-Resistant Stainless Steel
    18-8 Stainless Steel—The choice for wet and outdoor environments, these locknuts resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.
    Thread
    Size
    Wd.
    Ht.
    Insert Max.
    Temp., ° F
    Pkg.
    Qty.
    Pkg.
    18-8 Stainless Steel
    1"-14
    		1 7/16"35/64"2201000000000000000
     

    Thin-Profile Flex-Top Locknuts for Heavy Vibration
    3D CAD models available

    Image of Product. Front orientation. Locknuts. Thin-Profile Flex-Top Locknuts for Heavy Vibration.
    About two-thirds the height of standard flex-top nuts, these fit in spaces with low clearance. You can also use them as jam nuts by threading them against a hex nut to hold it in place. The top section expands to grip the screw on all sides for a stronger hold than both nylon-insert and distorted-thread locknuts. As a result, they're suitable for use in equipment with constant, vigorous vibration, such as engines. These locknuts are reusable a handful of times, but the holding power decreases with each use.
    Steel
    These locknuts have equivalent strength to Grade 8 and Class 10 steel nuts. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.
    Cadmium-Plated Steel—These locknuts have good lubricity to thread on smoothly and ease installation. The plating also creates a barrier against rust that's comparable to zinc yellow-chromate plating.
    Steel—Best for dry environments since moisture will cause these nuts to rust.
    Thread
    Size
    Wd.
    Ht.
    Pkg.
    Qty.
    Pkg.
    Cadmium-Plated Steel
    1"-14
    		1 7/16"37/64"1000000000000000
     
    Steel
    1"-14
    		1 7/16"37/64"10000000000000
     
    back to top