Plastic jaw inserts prevent damage to the workpiece.

A rubber-covered body provides a comfortable grip. These vises have a rotating end cap on the handle that allows you to apply constant pressure while turning the body of the vise with your fingertips.

Pass wires and rods through the hollow body of these vises.

Sets include four vises with different opening sizes. A hollow body allows wires and rods to pass through.

Notches on the jaws hold round material on its outside diameter.

Three chuck‐style jaws clamp around your part.

Attach these workstops to the side or top of your vise to keep parts in position for machining.

Arrange the included pins in a series of holes to position a part at any angle and hold odd-shaped parts securely.

Made from unhardened aluminum or steel, machine these jaws to fit the contours and curves of your workpiece.

Quickly move parallels in and out of these jaws to raise your workpiece within the vise. Mount jaws to the vise, slide the mating parallels in place, and rest your workpiece on top.

Hardened for wear resistance, these steel jaws are replacements for the ones that come installed on your vise.

The vise body and stationary jaw are one piece for high repeatability, even under heavy clamping loads. Ground flat on the base and three sides, these vises ensure accuracy whether mounted on the base, either side, or upright.

Designed to hold your part on 4- and 5-axis milling machines, these vises provide rigid clamping while exposing five full sides of the workpiece. This allows even complex parts to be completed in a single operation. You must cut a dovetail into your material before the vise can grip it.

Push the handle to slide the jaw into place for quicker setup than standard drill-press vises.

The dials on these vises are graduated in smaller increments than standard cross‐slide drill‐press vises for finer adjustment. Use to precisely position work on X and Y axes.

Tilt and lock the vise to hold work at any angle up to 90°.

Compressed air controlled by a foot pedal allows hands‐free operation. Use these vises in production applications with frequent insertion and removal of workpieces.

Tilt the head on two axes and rotate the base to position your workpiece at almost any angle.

These V-shaped liners hold large round material.

Place over the jaws and tighten the screws to securely attach liners.

Use these vises for general purpose workholding.

For large workpieces, these vises open three times as wide as standard tilting-head vises. Tilt and lock the head to position work at an angle.

Rotate the head 360° to use three different vise jaws and lock workpieces in position at 45° intervals.

A bright yellow vise body stands out on the shop floor.

Designed for outdoor use, these vises have a finish that resists corrosion.

For big jobs, these vises have a wider jaw opening, deeper throat depth, and larger footprint than standard vises.

Also known as woodworkers' vises, these mount to the underside of your workbench and sit flush with the surface.

Quickly install and remove the clamp-on base from a benchtop.

Secure small parts in spring clamps to keep hands free for soldering, gluing, and assembly.

Steel jaws secure round workpieces such as pipe, tubing, and conduit.

Set up the tripod wherever you need to work.

Squeeze the handles and the jaws will automatically adjust to fit your workpiece.

Press the lever down to lock these clamps, which fit in tight spaces and hold thin materials.

A removable, heavy duty steel base plate provides a flat, durable clamping surface. Carry it where needed or mount the base plate to your workbench.

The jaws on these tools apply outward pressure for use as a spreader.

Use these tools for light duty clamping. Squeeze the handles to open; release to close.

Clamp thin materials, or use in tight spaces.

Squeeze the handles to open the clamp; release and the spring holds it tightly in place.

Hold large workpieces with a standard-size clamp. Slide the jaws to adjust the opening size.

Attached to an arm you can flex into position, these clamps hold objects such as a flashlight, tool, or instructions.

Clamp thin sheet material together without drilling holes. These clamps open with special pliers and spring closed when the pliers are released.

Each jaw can be positioned at an angle to hold round, angled, and odd-shaped material.

The jaws move in unison to apply even pressure and prevent twisting.

Apply pressure to the side of a workpiece as well as the top and bottom.

The clamp body is extra-slim to fit into narrow openings.

Lighter weight than other metal clamps, these are less likely to bend thin material.

These clamps are made of stainless steel for excellent corrosion resistance.

With no handle or protruding screw, these clamps can fit into tight spaces.

With five times the capacity of standard C-clamps, these are the highest capacity clamps we offer.

Three screws apply pressure to three sides of a workpiece.

Sets include clamps with different ODs as well as installation pliers.

Choose a stainless steel tool for environments where moisture and other contaminants are present. These pliers resist corrosion that can hinder joint movement, but the jaws will wear more quickly than a steel tool. Lock the jaws around a workpiece and they stay clamped in a vise-like grip.

Squeeze the handles and the jaws automatically adjust to fit a workpiece and lock in place.

Clamp down on nonreinforced hose and tube to squeeze it shut, eliminating the need to drain the hose when working on pumps, heating and cooling systems, and fuel lines.

Long jaws reach workpieces in recessed areas. These pliers lock in a vise-like grip around a workpiece and stay clamped in place to leave your hands free.

Change out worn or broken springs in the handle of your locking pliers.

Attach your locking pliers to a slide hammer to pull stubborn objects.

Smooth, consistent movement ensures precision. These tools have a slip-resistant ultra grip that’s shaped to fit comfortably in your hand and reduce strain in repetitive tasks. They are also known as miniature and electronics pliers and shaped to reach around closely spaced components and other obstructions.

The smallest bent-nose pliers we offer allow you to work in the smallest spaces, including under a microscope. They are shaped to reach around closely spaced components and other obstructions.

Choose a stainless steel tool for environments where moisture and other contaminants are present. These pliers resist corrosion that can hinder joint movement, but the jaws will wear more quickly than a steel tool. They are shaped to reach around closely spaced components and other obstructions

The jaws are made of brass, which won't damage steel workpieces. These pliers are shaped to reach around closely spaced components and other obstructions.