McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    Help me decide (beta)
    32 Products

    Screwdrivers

    Image of Product. Front orientation. Screwdrivers.
    Image of Product. Grooved Tip. Front orientation. Grooved Tip.

    Grooved

    Tip

    A staple in any toolbox, these are your go-to screwdrivers for routine maintenance and repair. The handle is made from a combination of soft, grippy plastic for high torque and smooth, hard plastic for quick grip adjustments and high-speed turning. It's also contoured to maximize comfort and minimize hand strain, fatigue, and blisters, even with extended use.
    Premium—The best screwdrivers available, with tips machined to tight tolerances for the tightest possible fit in fastener recesses. The snug fit means they'll turn screws quickly without wearing screw heads and the driver's tip.
    Stubby—An extra-short handle and shaft squeeze behind mounted equipment and inside small panels.
    Standard Length—The most common screwdriver length for a specific drive size.
    Long—An extended shaft turns screws in deep recesses other screwdrivers can't reach.
    Grooved Tip—Bites into the screw drive for a firm hold, so you can make fast, easy turns without slippage.
    Shaft
    Drive
    Size
    Relative
    Lg.
    Overall
    Lg.
    Lg.
    Overall
    Wd.
    Tip
    Texture
    Material
    Mfr.
    Each
    JIS
     
    Premium
    No. 0Standard6"2 15/16"1/8"—Chrome-Plated SteelVessel53325A6400000
    No. 0Long7"3 15/16"1/8"—Chrome-Plated SteelVessel53325A2110000
    No. 1Stubby3"1"1/4"—Chrome-Plated SteelVessel53325A6200000
    No. 1Standard7 5/16"3"7/32"—Chrome-Plated SteelVessel53325A320000
    No. 2Stubby3"1"1/4"—Chrome-Plated SteelVessel53325A6300000
    No. 2Standard8 1/4"3 15/16"1/4"—Chrome-Plated SteelVessel53325A3300000
    No. 2Long10 1/4"5 7/8"1/4"GroovedChrome-Plated SteelVessel53325A21200000
    No. 2Long20 1/16"15 3/4"1/4"GroovedChrome-Plated SteelVessel53325A21300000
    No. 3Standard10 13/16"5 7/8"1/4"—Chrome-Plated SteelVessel53325A3400000
     

    Screwdriver Sets

    Image of Product. Front orientation. Screwdrivers. Screwdriver Sets.
    Keep a selection of screwdrivers on hand to turn fasteners of any size. The handles are made from a combination of soft, grippy plastic for high torque and smooth, hard plastic for quick grip adjustments and high-speed turning. They're also contoured to maximize comfort and minimize hand strain, fatigue, and blisters, even with extended use.
    Premium—The best screwdrivers available, with tips machined to tight tolerances for the tightest possible fit in fastener recesses. The snug fit means they'll turn screws quickly without wearing screw heads and the driver's tip.
    No. of
    Pieces
    Includes
    Material
    Mfr.
    Each
    JIS
     
    Premium
    3No. 1 JIS Screwdriver—6 7/8" O'all Lg.
    No. 2 JIS Screwdriver—8 1/4" O'all Lg.
    No. 3 JIS Screwdriver—10 13/16" O'all Lg.    		Chrome-Plated SteelVessel53325A61000000
     
    JIS and Slotted
     
    Premium
    65/32" Slotted Screwdriver—6" O'all Lg.
    7/32" Slotted Screwdriver—6 7/8" O'all Lg.
    1/4" Slotted Screwdriver—8 1/4" O'all Lg.
    No. 0 JIS Screwdriver—6" O'all Lg.
    No. 1 JIS Screwdriver—6 7/8" O'all Lg.
    No. 2 JIS Screwdriver—8 1/4" O'all Lg.    		Chrome-Plated SteelVessel9581N11100000
     

    JIS Bits

    Turn JIS (Japanese Industrial Standard) screws, which are commonly found in electronics assemblies. Similar in appearance to Phillips bits, JIS bits have sharper corners to deliver more torque without slipping and damaging the screw head.
    Hex Shank—Also known as insert bits, these snap into hand tools. If you want to use them with power tools, attach a bit adapter (not included).
    Quick-Change Hex Shank—Lock these bits directly into power tools. They won't wobble as much as bits paired with an adapter, so they are the best choice for high-precision tasks.
    Steel—Best for dry environments, since moisture will cause these bits to rust.
    Drive
    Size
    Overall
    Lg.
    Material
    Each
    For Hand Tools
    Image of Product. Hex Shank. Front orientation. Screwdriver Bits. JIS Bits, For Hand Tools.

    Hex Shank

     
    1/4" Hex Shank Size
    No. 001"Steel
    		2659N1100000
    No. 01"Steel
    		2659N10000
    No. 11"Steel
    		2659N20000
    No. 21"Steel
    		2659N30000
    No. 31"Steel
    		2659N40000
     
    For Power Tools
    Image of Product. Quick-Change Hex Shank. Front orientation. Screwdriver Bits. JIS Bits, For Power Tools.

    Quick-Change Hex Shank

     
    1/4" Quick-Change Hex Shank Size
    No. 002"Steel
    		2659N120000
    No. 02"Steel
    		2659N50000
    No. 11 7/8"Steel
    		2659N60000
    No. 22"Steel
    		2659N70000
    No. 32"Steel
    		2659N80000
     

    JIS Bit Sets

    Image of Product. Hex Shank. Front orientation. Screwdriver Bits. JIS Bit Sets, For Hand Tools.

    Hex Shank

    Image of Product. Quick-Change Hex Shank. Front orientation. Screwdriver Bits. JIS Bit Sets, For Power Tools.

    Quick-Change

    Hex Shank

    Turn a variety of JIS (Japanese Industrial Standard) screws, which are commonly found in electronics assemblies. Similar in appearance to Phillips bits, JIS bits have sharper corners to deliver more torque without slipping and damaging the screw head.
    Hex Shank—Also known as insert bits, these snap into hand tools. If you want to use them with power tools, attach a bit adapter (not included).
    Quick-Change Hex Shank—Lock these bits directly into power tools. They won't wobble as much as bits paired with an adapter, so they are the best choice for high-precision tasks.
    Steel—Best for dry environments, since moisture will cause these bits to rust.
    Components
    Included
    Bits Included
    Material
    Container
    Type
    Each
    For Hand Tools
     
    1/4" Hex Shank Size
    8 BitsJIS: No. 0, No. 1, No. 2, No. 3 (1" O'all Lg.)—2 ea.Steel
    		Plastic Caddy2661N1000000
     
    For Power Tools
     
    1/4" Quick-Change Hex Shank Size
    8 BitsJIS: No. 0, No. 1, No. 2, No. 3 (2" O'all Lg.)—2 ea.Steel
    		Plastic Caddy2661N200000
     

    Precise-Control Bit Screwdrivers

    Image of Product. Front orientation. Screwdrivers. Precise-Control Bit Screwdrivers.
    Make fine adjustments to a wide range of screws in electronics, miniature models, and more. These screwdrivers give you more control than standard screwdrivers, so you can avoid stripping tiny screws or cracking delicate materials. They’re also known as miniature screwdrivers. Press your palm against the end of the handle as you rotate the shaft with your fingertips.
    All components come in a carrying case with a magnetic locking lid. The underside of the lid has a raised grid pattern, so you can use it to organize your screws while you work.
    Premium—The best screwdrivers available, with handles that keep you comfortable during long stretches of use. They come with high-quality bits that fit snugly into fastener recesses to turn screws quickly without slipping.
    Shaft
    No. of
    Sizes
    Sizes Included
    Components Included
    For Bit Hex
    Shank Size
    Relative
    Lg.
    Overall
    Lg.
    Lg.
    Overall
    Wd.
    Material
    Bit-Holding
    Mechanism
    Mfr.
    Each
    Bit Screwdrivers with Bit Storage in Case
     
    Premium
    59Phillips: No. 000, No. 00, No. 0, No. 1, No. 2
    Slotted: 0.039", 0.059", 0.079", 0.098", 0.118", 0.157"
    Hex: 0.7 mm, 0.9 mm, 1.3 mm, 1.5 mm, 2 mm, 2.5 mm, 3 mm, 3.5 mm, 4 mm, 4.5 mm, 5 mm
    Torx: T2, T3, T4, T5
    Tamper-Resistant Torx: T6, T7, T8, T9, T10, T15, T20, T25
    Square: No. 1, No. 2
    JIS: No. 000, No. 00, No. 0, No. 1
    Drilled Spanner: No. 6, No. 8
    Pentalobe: PL2, PL5, PL6
    Triangle: 2 mm, 3 mm
    Y-Type: No. 000, No. 00, No. 0, No. 1
    Gamebit: 3.8 mm, 4.5 mm
    Nutdriver: 2.5 mm, 3 mm, 3.5 mm, 4 mm, 5 mm, 5.5 mm    		Bit Screwdriver for 4 mm Bits
    1/4" × 4 mm Hex Shank Adapter
    6" Lg. Flexible Extension
    iPhone Standoff Bit
    Oval Drive Bit
    SIM Card Ejector Bit
    Magnetic Retriever Bit    		4 mmStandard4 1/2"13/16"1/4"AluminumMagnetiFixIt9749N11000000
    112Phillips: No. 000, No. 00, No. 0
    Phillips: No. 1, No. 2, No. 3
    Slotted: 0.039", 0.059", 0.079", 0.098", 0.118", 0.138"
    Slotted: 0.157", 0.197", 0.236", 0.276", 0.315"
    Hex: 0.7 mm, 0.9 mm, 1.3 mm, 1.5 mm
    Tamper-Resistant Hex: 1/8", 9/64", 5/32", 3/16", 7/32", 1/4"
    Tamper-Resistant Hex: 2 mm, 2.5 mm, 3 mm, 3.5 mm
    Tamper-Resistant Hex: 4 mm, 5 mm, 6 mm, 7 mm, 8mm
    Torx: T2, T3, T4, T5
    Tamper-Resistant Torx: T6, T7, T8
    Tamper-Resistant Torx: T9, T10, T15, T20, T25, T27, T30, T35, T40
    Square: No. 0, No. 1, No. 2, No. 3
    Pozidriv®: No. 0, No. 1, No. 2, No. 3
    JIS: No. 000, No. 00, No. 0, No. 1
    Clutch: No. 1, No. 2, No. 3
    Drilled Spanner: No. 4, No. 6
    Drilled Spanner: No. 8, No. 10, No. 12
    Pentalobe: PL2, PL5, PL6
    Torq-Set®: No. 6, No. 8, No. 10
    Triangle: 2 mm, 2.2 mm, 2.6 mm, 3 mm
    Tri-Wing®: No. 1, No. 2, No. 3, No. 4
    Y-Type: No. 000, No. 00, No. 0, No. 1
    Triple Square: M5, M6, M8
    Gamebit: 3.8 mm, 4.5 mm
    Nutdriver: 2.5 mm, 3 mm, 3.5 mm, 4 mm, 4.5 mm, 5 mm, 5.5 mm    		Bit Screwdriver for 4 mm Bits
    Bit Screwdriver for 1/4" Bits
    1/4" × 4 mm Hex Shank Adapter
    1/4" Hex Shank × 1/4" Square Drive Adapter
    1/4" Driver × 3/8" Square Drive Adapter
    1/4" Square Drive × 1/4" Hex Shank Adapter
    iPhone Standoff Bit
    Oval Drive Bit
    SIM Card Ejector Bit
    Magnetic Retriever Bit
    Schrader Valve Core Bit
    Eyebolt and Hook Drive Bit    		1/4", 4 mmStandard4 1/2"13/16"1/4"AluminumMagnetiFixIt9749N1200000
     

    Precise-Control Screwdrivers

    Image of Product. Front orientation. Screwdrivers. Precise-Control Screwdrivers.
    Make fine-tuned adjustments on small, delicate components, such as electronics, miniature models, and microscopes. These screwdrivers give you better control than a standard screwdriver to avoid stripping tiny screws or cracking fragile materials. Press the end of the handle with your palm to apply constant pressure while turning the body of the screwdriver with your fingertips. They are also known as precision and miniature screwdrivers.
    Premium—The best screwdrivers available, with tips machined to tight tolerances for the tightest possible fit in fastener recesses. The snug fit means they'll turn screws quickly without wearing screw heads and the driver's tip.
    Standard Length—The most common screwdriver length for a specific drive size.
    Shaft
    Drive
    Size
    Relative
    Lg.
    Overall
    Lg.
    Lg.
    Overall
    Wd.
    Material
    Mfr.
    Each
    JIS
     
    Premium
    No. 00Standard6 11/16"3"3/32"Chrome-Plated SteelVessel52985A5300000
    No. 0Standard7 11/16"4"1/8"Chrome-Plated SteelVessel52985A540000
    No. 0Standard9 5/8"6"1/8"Chrome-Plated SteelVessel52985A550000
     

    Strikable Screwdrivers

    Image of ProductInUse. Strike with Hammer. Front orientation. Screwdrivers. Strikable Screwdrivers.
    Image of ProductInUse. Shown Using Hex-Shaped Bolster. Front orientation. ZoomedIn view. Screwdrivers. Strikable Screwdrivers.

    Strike with Hammer

    Shown Using Hex-Shaped

    Bolster

    Image of Product. Front orientation. Screwdrivers. Strikable Screwdrivers.
    Image of Product. Grooved Tip. Front orientation. Grooved Tip.

    Grooved

    Tip

    These are the toughest, most durable screwdrivers around. Whack them with a hammer to loosen stripped screws or pry off boards. Also known as demolition screwdrivers, their steel shaft extends all the way through the handle and there's a metal end cap for striking. If you need extra torque to turn a stubborn screw, grip the hex-shaped bolster at the top of the handle with a wrench.
    Premium—The best screwdrivers available, with tips machined to tight tolerances for the tightest possible fit in fastener recesses. The snug fit means they'll turn screws quickly without wearing screw heads and the driver's tip.
    Standard Length—The most common screwdriver length for a specific drive size.
    Long—An extended shaft turns screws in deep recesses other screwdrivers can't reach.
    Grooved Tip—Bites into the screw drive for a firm hold, so you can make fast, easy turns without slippage.
    Shaft
    Drive
    Size
    Relative
    Lg.
    Overall
    Lg.
    Lg.
    Overall
    Wd.
    Tip
    Texture
    Material
    Cap Material
    Mfr.
    Each
    JIS
     
    Premium
    No. 1Standard6 15/16"3"7/32"GroovedChrome-Plated SteelChrome-Plated SteelVessel7249A82000000
    No. 2Standard8 3/8"4"1/4"GroovedChrome-Plated SteelChrome-Plated SteelVessel7249A8300000
    No. 2Long10 3/8"6"1/4"GroovedChrome-Plated SteelChrome-Plated SteelVessel7249A8400000
    No. 3Standard10 15/16"6"5/16"GroovedChrome-Plated SteelChrome-Plated SteelVessel7249A8500000
     
    back to top