Filter by
JIS Tap Class
System of Measurement
Flute Type
Sold As
Shank Type
Thread Direction
Thread Type
Material
Overall Length
Finish
Number of Tapping Ends
Drill Bit Decimal Size Equivalent
U.S.–Mexico–Canada Agreement (USMCA) Qualifying
Export Control Classification Number (ECCN)
DFARS Specialty Metals
RoHS
REACH
Chip-Clearing Taps
 |
Spiral-Point Flute for Through Holes |
 |
Spiral Flute for Blind Holes |
Remove long, stringy chips to produce cleaner threads than standard taps. The flute design prevents buildup to protect the quality of the threads and avoid damage to the tap. Since you don’t need to reverse these taps to extract chips, they also create threads faster.
High-Speed Steel—The most versatile taps resist heat and wear to stay sharp. They’re good for most metals and plastic.
Uncoated—The economical choice, these won't last as long as coated taps.
Spiral-Point Flute for Through Holes—Push chips ahead of the tap and out of through holes. Also known as gun taps.
Spiral Flute for Blind Holes—Pull chips back toward the tap so they won't build up in blind holes. When tapping brittle material like iron that creates fine or powdery debris, choose a straight-flute tap.
Plug Chamfer—Our go-to chamfer type. With a longer taper than a bottoming chamfer, they are easier to turn but won't thread as close the bottom of a hole.
Bottoming Chamfer—These taps have the shortest taper to thread close to the bottom of blind holes. They require the most force to turn, so they’re often used to finish holes started by plug-chamfer taps.
Drill Bit | Spiral-Point Flute for Through Holes | Spiral Flute for Blind Holes | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Thread Lg. | Overall Lg. | Thread Type | JIS Tap Class | Size | Decimal Size Equiv. | Shank Type | Mfr. | Chamfer Type | No. of Flutes | Each | Chamfer Type | No. of Flutes | Each | ||||
High-Speed Steel | ||||||||||||||||||
Uncoated | ||||||||||||||||||
| M3 × 0.5 mm | 15/64" | 1 13/16" | Metric | 2 | 7/64" | 0.1094" | Square | OSG USA | — | — | ——— | 0 | Bottoming | 3 | 3192N11 | 000000 | ||
| M3 × 0.5 mm | 25/64" | 1 13/16" | Metric | 2 | 7/64" | 0.1094" | Square | OSG USA | Plug | 3 | 3192N18 | 00000 | — | — | ——— | 0 | ||
| M4 × 0.7 mm | 25/64" | 2 3/64" | Metric | 2 | 9/64" | 0.1406" | Square | OSG USA | — | — | ——— | 0 | Bottoming | 3 | 3192N12 | 0000 | ||
| M4 × 0.7 mm | 33/64" | 2 3/64" | Metric | 2 | 9/64" | 0.1406" | Square | OSG USA | Plug | 3 | 3192N19 | 0000 | — | — | ——— | 0 | ||
| M5 × 0.8 mm | 7/16" | 2 23/64" | Metric | 2 | 11/64" | 0.1719" | Square | OSG USA | — | — | ——— | 0 | Bottoming | 3 | 3192N13 | 0000 | ||
| M5 × 0.8 mm | 19/32" | 2 23/64" | Metric | 2 | 11/64" | 0.1719" | Square | OSG USA | Plug | 3 | 3192N21 | 0000 | — | — | ——— | 0 | ||
| M6 × 1 mm | 35/64" | 2 29/64" | Metric | 2 | 13/64" | 0.2031" | Square | OSG USA | — | — | ——— | 0 | Bottoming | 3 | 3192N14 | 0000 | ||
| M6 × 1 mm | 3/4" | 2 29/64" | Metric | 2 | 13/64" | 0.2031" | Square | OSG USA | Plug | 3 | 3192N22 | 00000 | — | — | ——— | 0 | ||
| M8 × 1.25 mm | 19/32" | 2 3/4" | Metric | 2 | 17/64" | 0.2656" | Square | OSG USA | — | — | ——— | 0 | Bottoming | 3 | 3192N15 | 00000 | ||
| M8 × 1.25 mm | 55/64" | 2 3/4" | Metric | 2 | 17/64" | 0.2656" | Square | OSG USA | Plug | 3 | 3192N23 | 00000 | — | — | ——— | 0 | ||
| M10 × 1.5 mm | 45/64" | 2 61/64" | Metric | 2 | 11/32" | 0.3438" | Square | OSG USA | — | — | ——— | 0 | Bottoming | 3 | 3192N16 | 00000 | ||
| M10 × 1.5 mm | 15/16" | 2 61/64" | Metric | 2 | 11/32" | 0.3438" | Square | OSG USA | Plug | 3 | 3192N24 | 00000 | — | — | ——— | 0 | ||
| M12 × 1.75 mm | 53/64" | 3 15/64" | Metric | 2 | 13/32" | 0.4063" | Square | OSG USA | — | — | ——— | 0 | Bottoming | 3 | 3192N17 | 00000 | ||
| M12 × 1.75 mm | 15/16" | 3 15/64" | Metric | 2 | 13/32" | 0.4063" | Square | OSG USA | Plug | 3 | 3192N25 | 00000 | — | — | ——— | 0 | ||
Taps
 |
Drill Bit | Plug Chamfer | Bottoming Chamfer | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Thread Lg. | Overall Lg. | Thread Type | JIS Tap Class | No. of Flutes | Size | Decimal Size Equiv. | Shank Type | Mfr. | Each | Each | ||||
High-Speed Steel | |||||||||||||||
Uncoated | |||||||||||||||
| M2.3 × 0.4 mm | 23/64" | 1 21/32" | Metric | 2 | 3 | 5/64" | 0.0781" | Square | OSG USA | 3192N312 | 000000 | ——— | 0 | ||
| M2.6 × 0.45 mm | 23/64" | 1 47/64" | Metric | 2 | 3 | 3/32" | 0.0937" | Square | OSG USA | 3192N314 | 00000 | ——— | 0 | ||
| M18 × 2 mm | 1 29/64" | 3 15/16" | Metric | 2 | 4 | 41/64" | 0.6406" | Square | OSG USA | 3192N315 | 00000 | ——— | 0 | ||
| M28 × 1.5 mm | 1 25/32" | 5 1/8" | Metric | 2 | 4 | 1 3/64" | 1.0469" | Square | OSG USA | 3192N321 | 000000 | 3192N319 | 0000000 | ||
| M32 × 1.5 mm | 1 29/64" | 4 9/64" | Metric | 2 | 4 | 1 13/64" | 1.2031" | Square | OSG USA | 3192N324 | 000000 | ——— | 0 | ||
| M33 × 1.5 mm | 1 29/64" | 4 21/64" | Metric | 2 | 4 | 1 1/4" | 1.25" | Square | OSG USA | 3192N327 | 000000 | 3192N326 | 000000 | ||
