Jointers For Wood | McMaster-Carr

Filter by

System of Measurement

Thread Size

Length

Screw Size

Material

Thread Length

Threading

Threaded on Both Ends

Finish

For Use On

Thread Type

DFARS Specialty Metals

Exempt

Not Compliant

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

REACH

RoHS

Export Control Classification Number (ECCN)

Tensile Strength

Thread Spacing

Thread Fit

Unified Standard Class 1A

Unified Standard Class 2A

Hardness

Thread Pitch

Drive Style

Width

Overall Length

Blade Width

Cutting Direction

Blade Material

120 Products

Pronged Wood Joiners

Connect and repair hard and soft wood pieces and joints.

Wd.	Lg.	Material	Pkg. Qty.		Pkg.
3/8"	1"	Steel	40	90050A211	00000
3/8"	1 5/16"	Steel	30	90050A213	0000
1/2"	1 11/16"	Steel	16	90050A217	0000

Hex-Drive Thread-Mount Studs for Wood

Turn these studs with a hex key to install more quickly than other studs for wood. Use them to suspend electrical wiring and to hang, mount, and fasten parts to wood structures. Also known as hanger bolts.

Stainless Steel—The choice for wet and outdoor environments, these studs resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.

	(A)		(B)
	Screw Size	Thread Lg.	Thread Size	Thread Lg.	Lg.	Drive Size	Tensile Strength	Hardness	Pkg. Qty.		Pkg.
Stainless Steel



		No. 8	1 3/16"	5/16"-18	5/16"	1 1/2"	5/32"	Not Rated	Not Rated	1	94706A920	00000

Benchtop Jointers

Shave down warped boards until they’re level with your work surface. These jointers are large enough to handle workpieces up to 10” wide, yet small enough to fit on your benchtop. Their cast iron work surface minimizes vibration better than aluminum models for consistent cuts—even with heavy use.

For long workpieces, pull out the work surface extensions to support your board before and after you cut. Connect your wet/dry vacuum or dust containment system to the dust port to contain wood chips.

	Jointers															Replacement Jointer Blades
			Work Surface
	Blade Wd.	Max. Cutting Dp.	Wd.	Lg.	Lg. with Extensions	Blade Material	Work Surface Material	For Vacuum Hose Dia.	Voltage, V AC	Current, amp	Electrical Connection	No. of Blades Included	Includes		Each	Pkg. Qty.		Pkg.
For Wood



		10"	1/8"	10"	34"	54"	Steel	Cast Iron	2 1/2"	120	12	Straight Blade	20	Two Push Blocks	9842N11	0000000	10	9842N12	000000

Accessories for Jointers

		Each
12-Gallon Wet/Dry Vacuum with 1 7/8" Hose	63205T71	0000000
2 1/2" Dia. Vacuum Hose	8716T42	00000

Electric Planes

Shave wood surfaces quickly to reduce thickness and chamfer edges. These electric planes remove just enough wood to get the surface thickness you need, leaving you with a smooth, flat finish along the grain.

Connect the included dust bag to the discharge port to contain chips and dust.

	Planes														Replacement Plane Blades
	Blade Wd.	Max. Cutting Dp.	Overall Lg.	Blade Material	Cutting Direction	Adjustment Dimension	Dp. Adjustment Increments	Voltage, V AC	Current, amp	Electrical Connection	No. of Blades Included	Certification		Each	Pkg. Qty.		Pkg.
For Wood



		3 1/4"	1/8"	11 1/4"	High-Speed Steel	Forward Stroke	Depth	1/128"	120	6	Straight Blade	2	ETL Listed	3228A23	000000	12	3228A24	000000

Corrugated Wood Joiners

Connect and repair soft wood pieces and joints.

Wd.	Lg.	Material	Pkg. Qty.		Pkg.
1/4"	1 1/16"	Steel	100	97846A432	00000
1/2"	1 1/16"	Steel	100	97846A440	0000
5/8"	1 1/16"	Steel	100	97846A444	0000

Filing Planes


Style A	Style B	Style C

Shape surfaces by rapidly removing material. Also known as surforms.

Curved Blade—Change the shape or contour of rounded surfaces.

Flat Blade—File uneven surfaces to remove bumps and reduce thickness.

	Planes												Replacement Plane Blades
		Blade			Overall
	Style	Shape	Lg.	Wd.	Lg.	Wd.	Blade Material	Handle Material	Body Material	Cutting Direction		Each		Each
For Foam, Metal, Plaster, Plastic, and Wood



		A	Curved	2 1/2"	1 5/8"	7 1/4"	1 5/8"	Steel	Plastic	Plastic	Backward Stroke	3758A15	00000	———	0


		B	Flat	5 1/2"	1 5/8"	5 5/8"	1 5/8"	Steel	—	Metal	Forward Stroke	3758A11	00000	3758A12	00000


		For Foam, Plaster, Plastic, and Wood



				C	Flat	10"	1 5/8"	12 1/2"	1 5/8"	Steel	Plastic	Metal	Forward Stroke	3696A1	00000	3696A5	0000

Plane Blades

		Each
Curved Blade for Style C	3696A3	00000

Planes


Style A	Style B

Style C

Smooth surfaces, reduce thickness, and chamfer edges on workpieces. These planes have an adjustable blade, so you can change the depth or length of your cuts.

Style A—Compact enough to use with just two fingers and fit in your tool belt, these planes make small adjustments. Also known as trimming planes.

Style B—With a low cutting angle, these planes slice through wood more easily than bench planes. However, they can tear wood along the grain. Also known as block planes.

Style C—Best for planing along the grain. Also known as bench planes.

Overall Length—The longer the plane, the better it is for flattening bowed and bumpy workpieces. Shorter planes give you more control over small areas.

Planes											Replacement Plane Blades
			Overall
Style	Cutting Angle	Blade Wd.	Lg.	Wd.	Blade Material	Body Material	Handle Material	Adjustment Dimension		Each		Each







			For Plastic and Wood

			A	21°	1"	3 1/2"	1 1/8"	Chrome-Plated Steel	Metal	Metal	Depth	3693A14	000000	———	0


			B	13.5°	1 3/8"	6 1/4"	1 3/4"	Chrome-Plated Steel	Metal	Metal	Depth, Length	3693A5	00000	3693A12	000000
			B	21°	1 5/8"	7"	2"	Chrome-Plated Steel	Metal	Metal	Depth, Length	3693A6	00000	3693A13	00000
			C	45°	2"	9 3/4"	2 1/2"	Chrome-Plated Steel	Metal	Plastic	Depth, Length	3692A13	00000	3692A22	00000
			C	45°	2"	14"	2 1/2"	Chrome-Plated Steel	Metal	Plastic	Depth, Length	3692A15	000000	3692A22	00000

Cordless Planes


DeWalt	Milwaukee

Cut with the speed of an electric plane without being tied to an outlet. These planes remove just enough wood to get the surface thickness you need, leaving you with a smooth, flat finish along the grain.

Dust Port Adapter—To contain wood chips, use these adapters to connect your wet/dry vacuum to the dust port.

	Planes													Required Batteries			Required Battery Chargers		Dust Port Adapter		Replacement Plane Blades
	Blade Wd.	Max. Cutting Dp.	Overall Lg.	Blade Material	Adjustment Dimension	Dp. Adjustment Increments	For Vacuum Hose Dia.	Voltage, V DC	Batteries Included	No. of Blades Included	Certification		Each	Pkg. Qty.		Pkg.		Each		Each		Pair
DeWalt







				For Wood

				3 1/4"	5/64"	13 3/4"	Carbide	Depth	1/256"	1 1/4"	20	No	2	—	9877N11	0000000	1	29835A4	0000000	29835A113	0000000	9877N12	000000	3228A22	000000


				Milwaukee







								For Wood

								3 1/4"	5/64"	12 3/8"	Carbide	Depth	1/256"	1 1/4"	18	No	2	UL Listed	9877N13	000000	1	29735A211	000000	29735A128	00000	9877N15	00000	9877N14	00000

Vacuum Cleaners

		Each
Wet/Dry Vacuum with 1 1/4" Hose	7439T51	0000000

Thread-Mount Studs for Wood

Also known as hanger bolts, use these studs to hang, mount, and fasten parts to wood structures. Install them with a stud driver, or create wrench flats by threading two nuts onto the stud and jamming them together.

Black-Oxide Steel—Typically chosen for their appearance, these studs have a dark, matte coating that creates a finished look. They offer minimal corrosion resistance, so they're best for dry environments.

Zinc-Plated Steel—The most common choice for areas with occasional exposure to moisture.

18-8 Stainless Steel—The choice for wet and outdoor environments, these studs resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.

316 Stainless Steel—Superior to 18-8 stainless steel, these studs won't degrade when exposed to harsh weather, salt water, and most chemicals.

	(A)		(B)
	Screw Size	Thread Lg.	Thread Size	Thread Lg.	Lg.	Tensile Strength	Hardness	Pkg. Qty.		Pkg.
Black-Oxide Steel



		No. 8	7/8"	8-32	5/8"	1 1/2"	Not Rated	Not Rated	50	90207A301	000000


		No. 8	1"	8-32	3/4"	1 3/4"	Not Rated	Not Rated	25	90207A302	00000
		No. 8	1"	8-32	1"	2"	Not Rated	Not Rated	25	90207A303	00000
		No. 10	7/8"	10-24	5/8"	1 1/2"	Not Rated	Not Rated	25	90207A304	00000
		No. 10	1"	10-24	1"	2"	Not Rated	Not Rated	25	90207A305	00000
		No. 10	1 1/2"	10-24	1"	2 1/2"	Not Rated	Not Rated	25	90207A306	00000
		No. 10	1 1/2"	10-24	1 1/2"	3"	Not Rated	Not Rated	10	90207A307	0000
		1/4"	1"	1/4"-20	1"	2"	Not Rated	Not Rated	10	90207A308	0000
		1/4"	1 1/2"	1/4"-20	1"	2 1/2"	Not Rated	Not Rated	10	90207A309	0000
		1/4"	1 1/2"	1/4"-20	1 1/2"	3"	Not Rated	Not Rated	10	90207A310	00000
		5/16"	1 1/2"	5/16"-18	1"	2 1/2"	Not Rated	Not Rated	10	90207A311	00000


		5/16"	1 1/2"	5/16"-18	1 1/2"	3"	Not Rated	Not Rated	5	90207A312	0000
		5/16"	2"	5/16"-18	1 1/2"	3 1/2"	Not Rated	Not Rated	5	90207A313	0000
		3/8"	1 1/2"	3/8"-16	1 1/2"	3"	Not Rated	Not Rated	5	90207A314	00000
		3/8"	2"	3/8"-16	1 1/2"	3 1/2"	Not Rated	Not Rated	5	90207A315	00000
		3/8"	2"	3/8"-16	2"	4"	Not Rated	Not Rated	5	90207A316	00000
		3/8"	3"	3/8"-16	1 3/8"	5"	Not Rated	Not Rated	5	90207A317	00000
		3/8"	3"	3/8"-16	1 1/2"	6"	Not Rated	Not Rated	5	90207A318	00000
		3/8"	3"	3/8"-16	2 1/2"	10"	Not Rated	Not Rated	1	90207A319	00000


		Zinc-Plated Steel



				No. 8	7/8"	8-32	5/8"	1 1/2"	Not Rated	Not Rated	100	90207A182	0000


				No. 8	1"	8-32	3/4"	1 3/4"	Not Rated	Not Rated	100	90207A185	0000
				No. 8	1"	8-32	1"	2"	Not Rated	Not Rated	100	90207A189	00000
				No. 10	7/8"	10-24	5/8"	1 1/2"	Not Rated	Not Rated	100	90207A251	00000
				No. 10	1"	10-24	1"	2"	Not Rated	Not Rated	50	90207A253	00000
				No. 10	1 1/2"	10-24	1"	2 1/2"	Not Rated	Not Rated	50	90207A255	00000
				No. 10	1 1/2"	10-24	1 1/2"	3"	Not Rated	Not Rated	50	90207A257	00000
				1/4"	1"	1/4"-20	1"	2"	Not Rated	Not Rated	50	90207A550	00000
				1/4"	1 1/2"	1/4"-20	1"	2 1/2"	Not Rated	Not Rated	50	90207A552	00000
				1/4"	1 1/2"	1/4"-20	1 1/2"	3"	Not Rated	Not Rated	25	90207A554	00000
				5/16"	1 1/2"	5/16"-18	1"	2 1/2"	Not Rated	Not Rated	25	90207A593	00000


				5/16"	1 1/2"	5/16"-18	1 1/2"	3"	Not Rated	Not Rated	25	90207A595	00000
				5/16"	2"	5/16"-18	1 1/2"	3 1/2"	Not Rated	Not Rated	25	90207A597	00000
				3/8"	1 1/2"	3/8"-16	1 1/2"	3"	Not Rated	Not Rated	25	90207A636	00000
				3/8"	2"	3/8"-16	1 1/2"	3 1/2"	Not Rated	Not Rated	10	90207A638	00000
				3/8"	2"	3/8"-16	2"	4"	Not Rated	Not Rated	10	90207A640	00000
				3/8"	3"	3/8"-16	1 3/8"	5"	Not Rated	Not Rated	10	90207A647	00000
				3/8"	3"	3/8"-16	1 1/2"	6"	Not Rated	Not Rated	10	90207A648	00000
				3/8"	3"	3/8"-16	2 1/2"	10"	Not Rated	Not Rated	1	90207A656	0000
				3/8"	3"	3/8"-16	2 1/2"	12"	Not Rated	Not Rated	1	90207A658	0000
				1/2"	3"	1/2"-13	2 1/2"	6"	Not Rated	Not Rated	1	90207A736	0000


				1/2"	3"	1/2"-13	2 1/2"	12"	Not Rated	Not Rated	1	90207A748	00000


				18-8 Stainless Steel



	No. 10				5/8"	10-24	3/8"	1"	Not Rated	Not Rated	25	90915A641	00000


	No. 10				7/8"	10-24	5/8"	1 1/2"	Not Rated	Not Rated	25	90915A410	00000
	No. 10				1"	10-24	1"	2"	Not Rated	Not Rated	25	90915A414	00000
	No. 10				1 1/2"	10-24	1"	2 1/2"	Not Rated	Not Rated	10	90915A642	0000
	No. 10				1 1/2"	10-24	1 1/2"	3"	Not Rated	Not Rated	10	90915A418	0000
	1/4"				7/8"	1/4"-20	5/8"	1 1/2"	Not Rated	Not Rated	10	90915A643	0000
	1/4"				1"	1/4"-20	1"	2"	Not Rated	Not Rated	10	90915A550	0000
	1/4"				1 1/2"	1/4"-20	1"	2 1/2"	Not Rated	Not Rated	10	90915A552	00000
	1/4"				1 1/2"	1/4"-20	1 1/2"	3"	Not Rated	Not Rated	10	90915A554	00000
	1/4"				2"	1/4"-20	1 1/2"	3 1/2"	Not Rated	Not Rated	10	90915A555	00000
	1/4"				2"	1/4"-20	2"	4"	Not Rated	Not Rated	10	90915A644	00000


	1/4"				3"	1/4"-20	1 3/8"	5"	Not Rated	Not Rated	5	90915A653	00000
	1/4"				3"	1/4"-20	1 1/2"	4 1/2"	Not Rated	Not Rated	10	90915A645	00000
	1/4"				3"	1/4"-20	1 1/2"	6"	Not Rated	Not Rated	5	90915A654	00000
	1/4"				3"	1/4"-20	2 1/2"	8"	Not Rated	Not Rated	5	90915A655	00000
	5/16"				7/8"	5/16"-18	5/8"	1 1/2"	Not Rated	Not Rated	10	90915A646	00000
	5/16"				1"	5/16"-18	1"	2"	Not Rated	Not Rated	10	90915A647	00000
	5/16"				1 1/2"	5/16"-18	1"	2 1/2"	Not Rated	Not Rated	10	90915A593	00000
	5/16"				1 1/2"	5/16"-18	1 1/2"	3"	Not Rated	Not Rated	10	90915A595	00000
	5/16"				2"	5/16"-18	1 1/2"	3 1/2"	Not Rated	Not Rated	10	90915A597	00000
	5/16"				2"	5/16"-18	2"	4"	Not Rated	Not Rated	5	90915A648	00000


	5/16"	3"			5/16"-18	1 1/4"	5"	Not Rated	Not Rated	5	90915A656	00000
	5/16"	3"	5/16"-18		1 1/2"	6"	Not Rated	Not Rated	5	90915A657	00000
	3/8"	1 1/2"	3/8"-16		1 1/2"	3"	Not Rated	Not Rated	5	90915A636	00000
	3/8"	2"	3/8"-16		1 1/2"	3 1/2"	Not Rated	Not Rated	5	90915A638	00000
	3/8"	2"	3/8"-16		2"	4"	Not Rated	Not Rated	5	90915A640	00000
	3/8"	3"	3/8"-16		1 3/8"	5"	Not Rated	Not Rated	1	90915A658	0000
	3/8"	3"	3/8"-16		1 1/2"	6"	Not Rated	Not Rated	1	90915A659	0000
	3/8"	3"	3/8"-16		2 1/2"	8"	Not Rated	Not Rated	1	90915A660	0000
	1/2"	2"	1/2"-13		1"	3"	Not Rated	Not Rated	1	90915A649	0000
	1/2"	2"	1/2"-13		1 1/2"	3 1/2"	Not Rated	Not Rated	1	90915A650	0000


	1/2"	2"	1/2"-13		2"	4"	Not Rated	Not Rated	1	90915A651	0000
	1/2"	3"	1/2"-13		2"	5"	Not Rated	Not Rated	1	90915A652	0000
	1/2"	3"	1/2"-13		2 1/2"	6"	Not Rated	Not Rated	1	90915A661	0000
	1/2"	3"	1/2"-13		2 1/2"	8"	Not Rated	Not Rated	1	90915A662	00000


	316 Stainless Steel



			M5		27 mm	M5 × 0.8 mm	20 mm	50 mm	Not Rated	Not Rated	1	98828A100	0000


			M6		37 mm	M6 × 1 mm	30 mm	70 mm	Not Rated	Not Rated	1	98828A200	0000
			M8		57 mm	M8 × 1.25 mm	40 mm	100 mm	Not Rated	Not Rated	1	98828A300	0000
			M10		40 mm	M10 × 1.5 mm	20 mm	60 mm	100,000 psi	Rockwell C25	1	98828A310	0000
			M10		60 mm	M10 × 1.5 mm	20 mm	80 mm	100,000 psi	Rockwell C25	1	98828A320	0000
			M10		70 mm	M10 × 1.5 mm	30 mm	100 mm	100,000 psi	Rockwell C25	1	98828A330	0000