We will reply to your message within an hour.
More
Also known as Oilite® bearings.
Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds.
For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.
With a flexible layer of rubber sandwiched between an oil-embedded bronze bearing and rigid metal shell, these bearings reduce wear and machinery noise.
With extra iron and filled with oil containing slippery PTFE, these bearings support heavy loads that frequently start and stop along shafts.
Unlike other sleeve bearings, these do not need to be fully inserted into a housing. Their unique shape creates a permanent, secure hold in thin panels.
The oil in these bearings is suitable for incidental contact with food.
Embedded with oil that is safe for incidental contact with food, these bearings are suitable for use in high-load applications such as bottling and filling lines in food processing plants. They are also known as Super Oilite® bearings.
A metal shell adds strength.
Graphite provides a layer of dry lubrication that can operate in high-temperature environments.
Use these bearings in applications with frequent starts and stops because they operate with very little friction.
Use where high loads and speeds are not required.
Made of FDA-listed materials or FDA compliant, these bearings are for use in food applications. They also withstand caustic and washdown environments.
These bearings stand up to a wider range of chemicals than other dry-running sleeve bearings.
Good for underwater applications, these bearings won’t swell or warp when wet.
Reinforced with polyester fabric, these plastic bearings have load and speed capabilities comparable to metal bearings.
Permanently and securely install these self-clinching bearings into panels, with no need for precision-bored holes or machined mounts.
Even in the presence of harsh chemicals and extreme temperatures, these bearings operate under heavy loads and at high speeds.
These bronze bearings are strong, wear resistant, and excellent at handling shock loads.
A figure-8-shaped groove provides a flow path for lubricant, distributing it evenly along the bearing’s surface.
The addition of iron and aluminum gives these aluminum-bronze bearings high strength and excellent corrosion resistance—making them suitable for use in marine and mining applications.
Grooves on the inside of the bearing provide a flow path for lubricant, distributing it evenly along the bearing’s surface.
Made of FDA listed materials for use in food applications, these bearings also withstand caustic and washdown environments.
An aluminum shell adds strength.
A slit running along the length of these bearings allows you to quickly slip them into a housing—no tools required.
Graphite provides a layer of dry lubrication that operates in high-temperature environments.
These bearings stand up to a wider range of chemicals than other dry-running flanged sleeve bearings.
Compensating for minor shaft misalignment and not requiring lubrication, these sleeve bearings swivel to self-align and are dry running. They don’t need a housing and you can install and replace them without any tools because they’re slip fit.
Made of acetal with a PTFE filler, these bearings handle velocities up to twice as high as standard acetal bearings. They swivel to compensate for a small amount of shaft misalignment.
With oil for reduced friction and iron for added strength, these bearings handle frequent stops and starts in high-load applications.
These bearings come with a traceable lot number and material test report. They are also known as Oilite® bearings.
Support heavy loads that are often found in bottling and filling lines in food plants—these bearings contain extra iron and FDA-compliant oil. They’re flanged, so they handle loads both parallel and perpendicular to the shaft.
Furnished with a traceable lot number and material test report, these bronze bearings are strong, wear resistant, and excellent at handling shock loads.
A metal backing adds strength.
These bearings stand up to a wider range of chemicals than other dry-running thrust bearings.
Handle heavy loads that frequently start and stop along shafts—these bearings contain extra iron and slippery PTFE lubricant. They’re thrust bearings, which means they support loads parallel to the shaft.
The oil in these bearings is NSF registered H1 and FDA compliant for incidental contact with food.
Made of 863 iron-copper and embedded with NSF registered H1 oil, these bearings can tackle high-load applications in food plants, such as bottling and filling lines.
Capable of handling temperatures from -400° to 750° F, these graphalloy bearings withstand the widest temperature range of any of our mounted bearings.
Made from slippery materials, these bearings reduce friction without the oily mess.
Made of acetal blended with PTFE, these bearings handle speeds twice as fast as standard sleeve bearings.
These nylon bearings swivel inside their housing to compensate for over 20° of shaft misalignment.
Use these UHMW bearings in wet, corrosive environments.
A reliable classic—these babbitt bearings are strong and corrosion resistant.
With a flexible layer of neoprene sandwiched between an oil-embedded bronze bearing and rigid steel shell, these bearings reduce wear and machinery noise.
Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface.
A strong steel housing allows these bearings to handle higher speeds than standard oil-embedded mounted sleeve bearings.
Embedded lubricant particles increase the load capacity of these bearings while also making them slippery.
Made of acetal with a PTFE filling, these light duty bearings handle speeds twice as fast as standard acetal bearings can.
Made of FDA listed PEEK, these bearings are suitable for direct contact with food. The closed backing blocks out dust and other contaminants.
Use these nylon or acetal bearings for light loads. The closed backing blocks out dust and other contaminants.
Handling speeds twice as fast as standard mounted sleeve bearings while limiting wear on your system, these bearings are made of PTFE-filled acetal.
Capable of handling temperatures from -400° to 750° F, these graphalloy bearings have the widest temperature range of any of our mounted bearings.
With no moving parts, sleeve bearings are better for dirty environments than ball and roller bearings.
Made of high-performance plastic, these insert bearings last longer than metal insert bearings. They also don’t require lubrication.
Also known as Trantorque bushings, these tighten with a twist of the collar nut—no screws needed.
A mounting flange prevents movement during tightening.
Insert these bushings into the bore of your sprocket for flush or recessed mounting.
A toothed slot lets these bushings contract for insertion into the bore of your sprocket or pulley and then expand for a snug fit.
Reduce the ID of sprockets, pulleys, and gears in low-torque applications.
The tapered barrel on these bushings is split on both sides, allowing them to contract more tightly around the shaft than quick-disconnect and taper-lock bushings.
The screw connections on these bushings easily mate to compatible quick-disconnect sprockets and pulleys.
Often used with V-groove wheels or track roller carriages, these off-center bushings create precise mounting clearance.
Mount these hubless bushings flush into your sprocket or pulley for a slim profile with no protruding screws.
Instead of replacing your shaft or keeping components, such as couplings, with various bore diameters on hand, these reducers adapt the bore of a component to a smaller size.
Ribbed bushings are more flexible than our smooth vibration-damping bushings, so they're easier to install.
In addition to having a wider temperature range than our other vibration-damping bushings, these have excellent weather resistance.
In addition to having a wider temperature range than our other ribbed vibration-damping bushings, these have excellent weather resistance.
Easier to install than grommets, push these bushings through your mounting hole to dampen vibration. Use them with a vibration-damping washer to isolate vibration.