McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    509 Products

    Sold As

    For Tool Type

    Bit Sets

    Image of Product. Hex Shank. Front orientation. Screwdriver Bits. Bit Sets, For Hand Tools.
    Image of Product. Quick-Change Hex Shank. Front orientation. Screwdriver Bits. Bit Sets, For Power Tools.

    Hex Shank

    Quick-Change Hex Shank

    Have a range of bits ready to turn the most common screw styles and sizes.
    Hex Shank—Also known as insert bits, these snap into hand tools. If you want to use them with power tools, attach a bit adapter (not included).
    Quick-Change Hex Shank—Lock these bits directly into power tools. They won't wobble as much as bits paired with an adapter, so they are the best choice for high-precision tasks.
    Steel—Best for dry environments, since moisture will cause these bits to rust.
    No. of
    Pieces
    Components Included
    Bits Included
    Adapters Included
    Drive Tools Included
    Material
    Container
    Type
    Each
    For Hand Tools
     
    1/4" Hex Shank Size
    101 Adapter
    9 Bits    		Hex: 1/8", 5/32", 3/16" (1" O'all Lg.)
    Phillips: No. 1, No. 2, No. 3 (1" O'all Lg.)
    Slotted: 3/16", 7/32", 1/4" (1" O'all Lg.)    		2 3/8" Lg. Bit Adapter for Power Tools—SteelPlastic Case8348A17000000
    111 Adapter
    10 Bits    		Phillips: No. 0, No. 1, No. 2, No. 3 (1" O'all Lg.)
    Slotted: 7/32", 1/4", 5/16" (1" O'all Lg.)
    Torx: T10, T15, T20 (1" O'all Lg.)    		2 3/8" Lg. Bit Adapter for Power Tools—SteelPlastic Case8348A1100000
    271 Adapter
    1 Drive Tool
    25 Bits    		Clutch: 1/8", 5/32" (1" O'all Lg.)
    Hex: 5/64", 3/32", 1/8", 5/32", 3/16" (1" O'all Lg.)
    Phillips: No. 1, No. 2, No. 3 (1" O'all Lg.)
    Slotted: 5/32", 11/64", 7/32", 1/4", 9/32" (1" O'all Lg.)
    Square: No. 0, No. 1, No. 2, No. 3 (1" O'all Lg.)
    Torx: T10, T15, T20, T25, T30, T40 (1" O'all Lg.)    		2 1/4" Lg. Bit Adapter for Power Tools7 3/4" Lg. Bit ScrewdriverSteelPlastic Case53365A4300000
    291 Drive Tool
    2 Adapters
    26 Bits    		Hex (Inch): 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8" (1" O'all Lg.)—1 ea.
    Hex (Metric): 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm (1" O'all Lg.)—1 ea.
    Phillips: No. 1, No. 3 (1" O'all Lg.)—1 ea.
    Phillips: No. 2 (1" O'all Lg.)—2 ea.
    Slotted: 3/16", 1/4", 9/32" (1" O'all Lg.)—1 ea.    		1/4" Male Square Drive × 1/4" Hex Shank Adapter
    2 1/8" Lg. Bit Adapter for Power Tools    		7 3/4" Lg. Bit ScrewdriverSteelPlastic Case53365A32000000
    301 Adapter
    29 Bits    		External Hex: 1/4", 5/16", 3/8", 7/16" (2 5/8" O'all Lg.)—1 ea.
    Phillips: No. 1, No. 3 (1" O'all Lg.)—2 ea.
    Phillips: No. 2 (1" O'all Lg.)—7 ea.
    Phillips: No. 2 (2" O'all Lg.)—2 ea.
    Slotted: 13/64", 15/64", 9/32" (1" O'all Lg.)—1 ea.
    Slotted: 15/64" (2" O'all Lg.)—1 ea
    Square: No. 1, No. 3 (1" O'all Lg.)—1 ea.
    Square: No. 2 (1" O'all Lg.)—5 ea.
    Square: No. 2 (2" O'all Lg.)—1 ea.    		2 1/4" Lg. Bit Adapter for Power Tools—SteelPlastic Case52725A3400000
    351 Drive Tool
    2 Adapters
    32 Bits    		Hex (Inch): 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4" (1" O'all Lg.)
    Hex (Metric): 1.5 mm, 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm (1" O'all Lg.)
    Phillips: No. 0, No. 1, No. 2, No. 3 (1" O'all Lg.)
    Slotted: 7/32", 1/4" (1" O'all Lg.)
    Square: No. 1, No. 2 (1" O'all Lg.)
    Torx: T8, T10, T15, T20, T25, T27, T30 (1" O'all Lg.)    		1/4" Male Square Drive × 1/4" Hex Shank Adapter
    2 1/4" Lg. Bit Adapter for Power Tools    		3 1/2" Lg. Tight-Clearance Ratcheting Bit ScrewdriverSteelMetal Case52725A3700000
    381 Adapter
    1 Drive Tool
    36 Bits    		Drilled Spanner: No. 4, No. 6, No. 8, No. 10 (1" O'all Lg.)
    Phillips: No. 1 (1" O'all Lg.) - 1 ea.
    Phillips: No. 2 (1" O'all Lg.) - 2 ea.
    Pozidriv®: No. 0, No. 1, No. 2, No. 3 (1" O'all Lg.)
    Slotted: 5/16"
    Square: No. 1, No. 2, No. 3 (1" O'all Lg.)
    Tamper-Resistant Hex: 5/64", 3/32", 7/64", 1/8", 9/64", 5/32" (1" O'all Lg.)
    Tamper-Resistant Torx: T8, T10, T15, T20, T25, T27, T30, T40 (1" O'all Lg.)
    Torq-Set®: No. 6, No. 8, No. 10 (1" O'all Lg.)
    Tri-Wing®: No. 1, No. 2, No. 3, No. 4 (1" O'all Lg.)    		1/4" Hex Drive Adapter3 1/2" Lg. Ratchet WrenchSteelPlastic Case5996A400000
    391 Drive Tool
    2 Adapters
    36 Bits    		Drilled Spanner: No. 4, No. 6, No. 8, No. 10 (1" O'all Lg.)
    Phillips: No. 1, No. 2 (1" O'all Lg.)
    Pozidriv®: No. 0, No. 1, No. 2, No. 3 (1" O'all Lg.)
    Slotted: 1/4", 5/16" (1" O'all Lg.)
    Square: No. 1, No. 2, No. 3 (1" O'all Lg.)
    Tamper-Resistant Hex: 5/64", 3/32", 7/64", 1/8", 9/64", 5/32" (1" O'all Lg.)
    Tamper-Resistant Torx: T8, T10, T15, T20, T25, T27, T30, T40 (1" O'all Lg.)
    Torq-Set®: No. 6, No. 8, No. 10 (1" O'all Lg.)
    Tri-Wing®: No. 1, No. 2, No. 3, No. 4 (1" O'all Lg.)    		1/4" Female Square Drive × 1/4" Female Hex Adapter
    2 1/4" Lg. Bit Adapter for Power Tools    		Screwdriver HandleSteelPlastic Case5996A1200000
    401 Drive Tool
    2 Adapters
    37 Bits    		Clutch: 5/32" (1" O'all Lg.)—1 ea.
    Hex (Inch): 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4" (1" O'all Lg.)—1 ea.
    Hex (Metric): 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm (1" O'all Lg.)—1 ea.
    Phillips: No. 0, No. 1, No. 2, No. 3 (1" O'all Lg.)—1 ea.
    Pozidriv®: No. 1, No. 2 (1" O'all Lg.)—1 ea.
    Slotted: 7/64", 5/32", 7/32" (1" O'all Lg.)—1 ea.
    Slotted: 9/32" (1" O'all Lg.)—2 ea.
    Square: No. 0, No. 1, No. 2, No. 3 (1" O'all Lg.)—1 ea.
    Torx: T10, T15, T20, T25, T27, T30, T40 (1" O'all Lg.)—1 ea.    		1 7/8" Lg. Bit Adapter for Power Tools
    1/4" Male Square Drive × 1/4" Hex Shank Adapter    		7 1/2" Lg. Bit ScrewdriverSteelPlastic Case8533A8300000
    511 Adapter
    50 Bits    		Hex: 1/8", 3/16" (1" O'all Lg.)—10 ea.
    Hex: 5/32" (1" O'all Lg.)—5 ea.
    Phillips: No. 1, No. 2 (1" O'all Lg.)—10 ea.
    Phillips: No. 3 (1" O'all Lg.)—5 ea.    		2 3/8" Lg. Bit Adapter for Power Tools—SteelPlastic Case8346A7300000
    1004 Adapters
    96 Bits    		Drilled Spanner: No. 4, No. 6, No. 8, No. 10, No. 12, 1/4" (1" O'all Lg.)—1 ea.
    Hex (Inch): 0.050", 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8" (1" O'all Lg.)—1 ea.
    Hex (Metric): 1.5 mm, 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm, 7 mm, 8 mm (1" O'all Lg.)—1 ea.
    Phillips: No. 0 (1" O'all Lg.)—1 ea.
    Phillips: No. 1, No. 3 (1" O'all Lg.)—2 ea.
    Phillips: No. 2 (1" O'all Lg.)—4 ea.
    Pozidriv®: No. 1, No. 2, No. 3 (1" O'all Lg.)—1 ea.
    Screw-In Hook Driver Bit—1 ea.
    Slotted: 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 3/8" (1" O'all Lg.)—1 ea.
    Square: No. 0, No. 1, No. 2, No. 3, No. 4 (1" O'all Lg.)—1 ea.
    Tamper-Resistant Hex (Inch): 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16" (1" O'all Lg.)—1 ea.
    Tamper-Resistant Hex (Metric): 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm (1" O'all Lg.)—1 ea.
    Tamper-Resistant Torx: T6, T7, T8, T9, T10, T15, T20, T25, T27, T30, T40 (1" O'all Lg.)—1 ea.
    Torx: T5, T6, T7, T8, T9, T10, T15, T20, T25, T27, T30, T40, T45, T50, T55 (1" O'all Lg.)—1 ea.    		1/4" Male Square Drive × 1/4" Hex Shank Adapter (1" O'all Lg.)
    1/4" Male Square Drive × 1/4" Hex Shank Adapter (2" O'all Lg.)
    2 1/2" Lg. Bit Adapter for Power Tools
    Bit Adapter for Square Drive Tools    		—SteelPlastic Case2599N100000
     
    1/4" and 5/16" Hex Shank Size
    351 Extension (2 3/8" Lg.)
    2 Drive Tools
    32 Bits    		Clutch 1/4" Hex Shank: 3/32", 1/8", 5/32", 3/16" (1" O'all Lg.)
    Hex 1/4" Hex Shank: 5/64", 3/32", 7/64", 1/8", 9/64", 7/32", 1/4" (1" O'all Lg.)
    Hex 5/16" Hex Shank: 5/32", 3/16" (1 1/4" O'all Lg.)
    Phillips 1/4" Hex Shank: No. 1, No. 2 (1" O'all Lg.)
    Pozidriv® 1/4" Hex Shank: No. 1, No. 2 (1" O'all Lg.)
    Slotted 1/4" Hex Shank: 3/16", 1/4", 9/32" (1" O'all Lg.)
    Square 1/4" Hex Shank: No. 1, No. 2, No. 3 (1" O'all Lg.)
    Torx 1/4" Hex Shank: T10, T15, T20, T25, T27, T30 (1" O'all Lg.)
    Torx 5/16" Hex Shank: T40, T45, T50 (1 1/4" O'all Lg.)    		—5 1/2" Lg. Tight-Clearance Ratcheting Bit Screwdriver
    5 3/8" Lg. Angled Tight-Clearance Ratcheting Bit Screwdriver    		SteelPlastic Case52815A15000000
     
    For Power Tools
     
    1/4" Quick-Change Hex Shank Size
    164 Adapters
    12 Bits    		External Hex: 5/16" (1 5/8" O'all Lg.)
    Phillips: No. 1, No. 2 (6" O'all Lg.)
    Phillips: No. 2, No. 3 (3 1/2" O'all Lg.)
    Pozidriv®: No. 2 (3 1/2" O'all Lg.)
    Torx: T15, T20 (3 1/2" O'all Lg.)
    Torx: T20, T25, T27, T30 (6" O'all Lg.)    		1/4" Male Square Drive × 1/4" Hex Shank Adapter
    3" Lg. Bit Adapter for Power Tools
    3/8" Male Square Drive × 1/4" Hex Shank Adapter
    6" Lg. Bit Adapter for Power Tools    		—SteelPlastic Case5965A1600000
    345 Adapters
    29 Bits    		External Hex: 3/8", 1/2" (1 3/4" O'all Lg.)
    External Hex: 5/16" (1 5/8" O'all Lg.)
    Phillips: No. 1, No. 2, No. 3 (2" O'all Lg.)
    Phillips: No. 1, No. 2, No. 3 (3 1/2" O'all Lg.)
    Phillips: No. 1, No. 2, No. 3 (6" O'all Lg.)
    Pozidriv®: No. 1, No. 2, No. 3 (2" O'all Lg.)
    Pozidriv®: No. 2 (3 1/2" O'all Lg.)
    Pozidriv®: No. 2 (6" O'all Lg.)
    Torx: T8, T9, T10 (2" O'all Lg.)
    Torx: T15, T20, T25, T27, T30 (6" O'all Lg.)
    Torx: T15, T20, T25, T30 (3 1/2" O'all Lg.)    		1/2" Male Square Drive × 1/4" Hex Shank Adapter
    1/4" Male Square Drive × 1/4" Hex Shank Adapter
    2 3/8" Lg. Bit Adapter for Power Tools
    3/8" Male Square Drive × 1/4" Hex Shank Adapter
    6" Lg. Bit Adapter for Power Tools    		—SteelPlastic Case5965A1300000
    5050 BitsHex (Inch): 0.050", 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 3/16", 7/32", 1/4" (2" O'all Lg.)—1 ea.
    Hex (Inch): 5/32" (2" O'all Lg.)—2 ea.
    Hex (Metric): 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm (2" O'all Lg.)—1 ea.
    Phillips: No. 0, No. 1, No. 2, No. 3, No. 4 (2" O'all Lg.)—1 ea.
    Slotted: 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16" (2" O'all Lg.)—1 ea.
    Square: No. 0, No. 1, No. 2, No. 3, No. 4 (2" O'all Lg.)—1 ea.
    Torx: T5, T6, T7, T8, T9, T10, T15, T20, T27, T30, T40 (2" O'all Lg.)—1 ea.
    Torx: T25 (2" O'all Lg.)—2 ea.    		——SteelPlastic Case2599N2000000
     

    Hex Bits

    With six contact points, these bits handle more torque than slotted and Phillips bits without slipping and stripping the drive.
    Hex Shank—Also known as insert bits, these snap into hand tools. If you want to use them with power tools, attach a bit adapter (not included).
    Quick-Change Hex Shank—Lock these bits directly into power tools. They won't wobble as much as bits paired with an adapter, so they are the best choice for high-precision tasks.
    Steel—Best for dry environments, since moisture will cause these bits to rust.
    Drive
    Size
    Overall
    Lg.
    Material
    Each
    For Hand Tools
    Image of Product. Hex Shank. Front orientation. Screwdriver Bits. Hex Bits, For Hand Tools.

    Hex Shank

     
    1/4" Hex Shank Size
    0.050"1"Steel8526A4600000
    1/16"1"Steel8526A470000
    5/64"1"Steel8526A610000
    3/32"1"Steel8526A620000
    7/64"1"Steel8526A630000
    1/8"1"Steel8526A640000
    9/64"1"Steel8526A650000
    5/32"1"Steel8526A660000
    3/16"1"Steel8526A670000
    7/32"1"Steel8526A680000
    1/4"1"Steel8526A690000
    5/16"1"Steel8526A710000
    3/8"1"Steel8526A720000
    1.5 mm1"Steel7389A430000
    2 mm1"Steel7389A210000
    2.5 mm1"Steel7389A220000
    3 mm1"Steel7389A230000
    4 mm1"Steel7389A240000
    5 mm1"Steel7389A250000
    6 mm1"Steel7389A260000
    7 mm1"Steel7389A440000
    8 mm1"Steel7389A270000
    9 mm1"Steel7389A450000
    10 mm1"Steel7389A280000
     
    5/16" Hex Shank Size
    5/32"1 3/8"Steel8526A810000
    3/16"1 3/8"Steel8526A820000
    7/32"1 3/8"Steel8526A830000
    1/4"1 3/8"Steel8526A840000
    5/16"1 3/8"Steel8526A850000
    3/8"1 3/8"Steel8526A860000
    3 mm1 1/4"Steel7389A310000
    4 mm1 1/4"Steel7389A320000
    5 mm1 1/4"Steel7389A330000
    6 mm1 1/4"Steel7389A340000
    8 mm1 1/4"Steel7389A350000
    10 mm1 1/4"Steel7389A360000
     
    4 mm Hex Shank Size
    0.028"1"Steel8526A210000
    0.035"1"Steel8526A220000
    0.050"1"Steel8526A230000
    1/16"1 1/8"Steel8526A110000
    5/64"1 1/8"Steel8526A120000
    3/32"1 1/8"Steel8526A130000
    7/64"1 1/8"Steel8526A140000
    1/8"1 1/8"Steel8526A150000
    9/64"1 1/8"Steel8526A160000
    5/32"1 1/8"Steel8526A170000
    0.71 mm1 1/8"Steel7389A110000
    0.89 mm1 1/8"Steel7389A120000
    1.27 mm1 1/8"Steel7389A130000
    1.5 mm1 1/8"Steel7389A140000
    2 mm1 1/8"Steel7389A150000
    2.5 mm1 1/8"Steel7389A160000
    3 mm1 1/8"Steel7389A170000
    4 mm1 1/8"Steel7389A180000
     
    For Power Tools
    Image of Product. Quick-Change Hex Shank. Front orientation. Screwdriver Bits. Hex Bits, For Power Tools.

    Quick-Change Hex

    Shank

     
    1/4" Quick-Change Hex Shank Size
    0.050"2"Steel7397A110000
    1/16"2"Steel7397A310000
    5/64"2"Steel7397A320000
    3/32"2"Steel7397A330000
    3/32"6"Steel7397A520000
    7/64"2"Steel7397A340000
    1/8"2"Steel7397A350000
    9/64"2"Steel7397A360000
    5/32"2"Steel7397A370000
    5/32"6"Steel7397A540000
    3/16"2"Steel7397A380000
    7/32"2"Steel7397A390000
    1/4"2"Steel7397A410000
    5/16"2"Steel7397A2800000
    1.5 mm2"Steel7397A560000
    2 mm2"Steel7397A470000
    2.5 mm2"Steel7397A420000
    3 mm2"Steel7397A430000
    4 mm2"Steel7397A440000
    5 mm2"Steel7397A450000
    6 mm2"Steel7397A460000
    7 mm2"Steel7397A570000
    8 mm2"Steel7397A480000
    10 mm2"Steel7397A5800000
    12 mm2"Steel7397A550000
    14 mm2"Steel7397A590000
     

    Bit Sets For Impact Drivers

    Image of Product. Front orientation. Screwdriver Bits. Bit Sets For Impact Drivers.
    Tougher than your average bits, the ones in these sets have a thin, flexible section on the shank that absorbs 30 times the impact force. They are heat treated for hardness and manufactured to tight tolerances, so they won't snap or slip under high stress.
    Hex Shank—Use a bit adapter (not included) to attach these bits to power tools.
    Wear-Resistant Diamond-Coated Steel—Diamond particles embedded in the tip bite into the screw head for a strong grip. Our most wear-resistant bits, these maintain their grip and shape, even when driving screws into tough materials.
    No. of
    Pieces
    Components
    Included
    Bits Included
    Adapters Included
    Material
    Container
    Type
    Each
    For Hand Tools
     
    1/4" Hex Shank Size
    101 Adapter
    9 Bits    		Phillips: No. 2 (1" O'all Lg.)—3 ea.
    Phillips: No. 3 (1" O'all Lg.)—1 ea.
    Torx: T25 (1" O'all Lg.)—3 ea.
    Torx: T30, T40 (1" O'all Lg.)—1 ea.    		1/4" Female Hex × 1/4" Male Hex for Power ToolsDiamond-Coated SteelPlastic Case2779N12000000
    301 Adapter
    29 Bits    		Hex: 3 mm, 4 mm, 5 mm, 6 mm (1" O'all Lg.)—1 ea.
    Phillips: No. 1 (1" O'all Lg.)—2 ea.
    Phillips: No. 2 (1" O'all Lg.)—3 ea.
    Phillips: No. 3 (1" O'all Lg.)—2 ea.
    Pozidriv®: No. 1, No. 3 (1" O'all Lg.)—2 ea.
    Pozidriv®: No. 2 (1" O'all Lg.)—3 ea.
    Torx: T10, T15 (1" O'all Lg.)—1 ea.
    Torx: T20, T30, T40 (1" O'all Lg.)—2 ea.
    Torx: T25 (1" O'all Lg.)—3 ea.    		1/4" Female Hex × 1/4" Male Hex for Power ToolsDiamond-Coated SteelPlastic Case2779N11000000
     

    Torx Bits

    Get a grip with less slip. These bits have a six-lobe shape that grips fasteners so they won't slip and damage the drive. Also known as star bits.
    Hex Shank—Also known as insert bits, these snap into hand tools. If you want to use them with power tools, attach a bit adapter (not included).
    Quick-Change Hex Shank—Lock these bits directly into power tools. They won't wobble as much as bits paired with an adapter, so they are the best choice for high-precision tasks.
    Steel—Best for dry environments, since moisture will cause these bits to rust.
    Titanium Nitride (TiN)-Coated Steel—A winning blend of wear and heat resistance. These bits maintain their grip and shape, even when driving screws at high speeds.
    Drive
    Size
    Overall
    Lg.
    Material
    Each
    For Hand Tools
    Image of Product. Hex Shank. Front orientation. Screwdriver Bits. Torx Bits, For Hand Tools.

    Hex Shank

     
    1/4" Hex Shank Size
    T11"Steel7013A7200000
    T21"Steel7013A730000
    T31"Steel7013A160000
    T41"Steel7013A170000
    T51"Steel7013A180000
    T61"Steel7013A190000
    T71"Steel7013A210000
    T81"Steel7013A220000
    T91"Steel7013A230000
    T101"Steel7013A240000
    T101"Titanium Nitride (TiN)-Coated Steel57625A410000
    T151"Steel7013A250000
    T151"Titanium Nitride (TiN)-Coated Steel57625A420000
    T201"Steel7013A260000
    T201"Titanium Nitride (TiN)-Coated Steel57625A430000
    T251"Steel7013A270000
    T251"Titanium Nitride (TiN)-Coated Steel57625A440000
    T271"Steel7013A280000
    T301"Steel7013A290000
    T301"Titanium Nitride (TiN)-Coated Steel57625A450000
    T401"Steel7013A310000
    T401"Titanium Nitride (TiN)-Coated Steel57625A460000
    T451 3/8"Steel7013A350000
    T501 3/8"Steel7013A360000
    T551 3/8"Steel7013A370000
     
    5/16" Hex Shank Size
    T301 1/4"Steel7013A410000
    T401 1/4"Steel7013A420000
    T451 1/4"Steel7013A430000
    T501 1/4"Steel7013A440000
    T551 1/4"Steel7013A450000
     
    4 mm Hex Shank Size
    T31 1/8"Steel7013A610000
    T41 1/8"Steel7013A620000
    T51 1/8"Steel7013A630000
    T61 1/8"Steel7013A640000
    T71 1/8"Steel7013A650000
    T81 1/8"Steel7013A660000
    T91 1/8"Steel7013A670000
    T101 1/8"Steel7013A680000
    T151 1/8"Steel7013A690000
    T201 1/8"Steel7013A710000
     
    For Power Tools
    Image of Product. Front orientation. Screwdriver Bits. Torx Bits, For Power Tools.
     
    1/4" Quick-Change Hex Shank Size
    T12"Steel7013A740000
    T22"Steel7013A750000
    T32"Steel7396A130000
    T42"Steel7396A140000
    T52"Steel7396A790000
    T62"Steel7396A740000
    T62 3/4"Steel7396A760000
    T63 1/2"Steel7396A780000
    T72"Steel7396A170000
    T72 3/4"Steel7396A770000
    T73 1/2"Steel7396A750000
    T82"Steel7396A180000
    T82 3/4"Steel7396A280000
    T83 1/2"Steel7396A380000
    T86"Steel7396A510000
    T92"Steel7396A190000
    T92 3/4"Steel7396A290000
    T93 1/2"Steel7396A390000
    T102"Steel7396A210000
    T102 3/4"Steel7396A310000
    T103 1/2"Steel7396A410000
    T106"Steel7396A520000
    T152"Steel7396A220000
    T152 3/4"Steel7396A320000
    T153 1/2"Steel7396A420000
    T156"Steel7396A530000
    T202"Steel7396A230000
    T202 3/4"Steel7396A330000
    T203 1/2"Steel7396A430000
    T206"Steel7396A540000
    T252"Steel7396A240000
    T252 3/4"Steel7396A340000
    T253 1/2"Steel7396A440000
    T256"Steel7396A550000
    T272"Steel7396A250000
    T272 3/4"Steel7396A350000
    T273 1/2"Steel7396A450000
    T276"Steel7396A560000
    T302"Steel7396A260000
    T302 3/4"Steel7396A360000
    T303 1/2"Steel7396A460000
    T306"Steel7396A570000
    T402"Steel7396A270000
    T402 3/4"Steel7396A370000
    T403 1/2"Steel7396A470000
    T406"Steel7396A580000
     

    Hex Bit Sets

    Image of Product. Hex Shank. Front orientation. Screwdriver Bits. Hex Bit Sets, For Hand Tools.
    Image of Product. Quick-Change Hex Shank. Front orientation. Screwdriver Bits. Hex Bit Sets, For Power Tools.

    Hex Shank

    Quick-Change Hex

    Shank

    Keep a selection of hex bits on hand to turn multiple screw sizes. With six contact points, hex bits handle more torque than slotted and Phillips bits without slipping and stripping the drive.
    Hex Shank—Also known as insert bits, these snap into hand tools. If you want to use them with power tools, attach a bit adapter (not included).
    Quick-Change Hex Shank—Lock these bits directly into power tools. They won't wobble as much as bits paired with an adapter, so they are the best choice for high-precision tasks.
    Steel—Best for dry environments, since moisture will cause these bits to rust.
    Components
    Included
    Bits Included
    Material
    Container
    Type
    Each
    For Hand Tools
     
    1/4" Hex Shank Size
    7 BitsHex: 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm (1" O'all Lg.)Steel—7389A41000000
    12 BitsHex: 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8" (1" O'all Lg.)SteelPlastic Caddy8526A8800000
     
    For Power Tools
     
    1/4" Quick-Change Hex Shank Size
    10 BitsHex (Inch): 1/8", 9/64", 5/32", 3/16", 7/32", 1/4" (2" O'all Lg.)
    Hex (Metric): 3 mm, 4 mm, 5 mm, 6 mm (2" O'all Lg.)    		SteelPlastic Caddy7397A2900000
     

    Screw-Holding Ball-Tip Hex Bit Sets

    Image of Product. Retaining Ring. Front orientation. Screwdriver Bits. Screw-Holding Ball-Tip Hex Bit Sets.
    Image of Product. Front orientation. Screwdriver Bits. Screw-Holding Ball-Tip Hex Bit Sets.
    Image of Attribute. Front orientation. Contains Annotated.

    Retaining

    Ring

    Turn a variety of hex screws in hard-to-reach places with just one hand. The ball tip has a retaining ring that grips screws so they won't fall off as you fasten. Also, the ball tip engages the screw drive at an angle to squeeze into tight spots.
    Quick-Change Hex Shank—Lock these bits directly into power tools. They won't wobble as much as bits paired with an adapter, so they are the best choice for high-precision tasks.
    Steel—Best for dry environments, since moisture will cause these bits to rust.
    Components
    Included
    Bits Included
    Max. Access
    Angle
    Screw-Holding
    Mechanism
    Material
    Container
    Type
    Each
    For Power Tools
     
    1/4" Quick-Change Hex Shank Size
    10 BitsHex (Inch): 1/8", 9/64", 5/32", 3/16", 7/32", 1/4" (2" O'all Lg.)
    Hex (Metric): 3 mm, 4 mm, 5 mm, 6 mm (2" O'all Lg.)    		20°Retaining RingSteelPlastic Caddy4538A59000000
     

    Torx Plus Bits

    With larger lobes than Torx bits, these deliver even more torque without slipping and stripping the drive. They have a similar profile to Torx but are not recommended for use with standard Torx screws.
    Hex Shank—Also known as insert bits, these snap into hand tools. If you want to use them with power tools, attach a bit adapter (not included).
    Quick-Change Hex Shank—Lock these bits directly into power tools. They won't wobble as much as bits paired with an adapter, so they are the best choice for high-precision tasks.
    Steel—Best for dry environments, since moisture will cause these bits to rust.
    Drive
    Size
    Overall
    Lg.
    Material
    Each
    For Hand Tools
    Image of Product. Hex Shank. Front orientation. Screwdriver Bits. Torx Plus Bits, For Hand Tools.

    Hex Shank

     
    1/4" Hex Shank Size
    IP11"Steel54305A4100000
    IP21"Steel54305A420000
    IP31"Steel54305A160000
    IP41"Steel54305A170000
    IP51"Steel54305A180000
    IP61"Steel54305A110000
    IP71"Steel54305A120000
    IP81"Steel54305A130000
    IP91"Steel54305A140000
    IP101"Steel54305A210000
    IP151"Steel54305A220000
    IP201"Steel54305A230000
    IP251"Steel54305A240000
    IP271"Steel54305A150000
    IP301"Steel54305A250000
    IP401"Steel54305A260000
     
    5/16" Hex Shank Size
    IP301 1/4"Steel54305A310000
    IP401 1/4"Steel54305A320000
    IP451 1/4"Steel54305A330000
    IP501 1/4"Steel54305A340000
     
    For Power Tools
    Image of Product. Quick-Change Hex Shank. Front orientation. Screwdriver Bits. Torx Plus Bits, For Power Tools.

    Quick-Change Hex

    Shank

     
    1/4" Quick-Change Hex Shank Size
    IP12"Steel3716A3100000
    IP22"Steel3716A3200000
    IP32"Steel3716A330000
    IP42"Steel3716A340000
    IP52"Steel3716A350000
    IP62"Steel3716A210000
    IP72"Steel3716A220000
    IP82"Steel3716A110000
    IP92"Steel3716A120000
    IP102"Steel3716A130000
    IP152"Steel3716A140000
    IP202"Steel3716A150000
    IP252"Steel3716A160000
    IP272"Steel3716A170000
    IP302"Steel3716A180000
    IP402"Steel3716A190000
     

    Ball-Tip Hex Bits

    Turn hex screws even when you can't access them head on. A ball tip with six points of contact engages the drive at an angle without slipping. These bits are handy for reaching screws in corners and underneath machinery.
    Hex Shank—Also known as insert bits, these snap into hand tools. If you want to use them with power tools, attach a bit adapter (not included).
    Quick-Change Hex Shank—Lock these bits directly into power tools. They won't wobble as much as bits paired with an adapter, so they are the best choice for high-precision tasks.
    Steel—Best for dry environments, since moisture will cause these bits to rust.
    Drive
    Size
    Overall
    Lg.
    Max. Access
    Angle
    Material
    Each
    For Hand Tools
    Image of Product. Hex Shank. Front orientation. Screwdriver Bits. Ball-Tip Hex Bits, For Hand Tools.

    Hex Shank

    Image of Attribute. Front orientation. Contains Annotated.
     
    1/4" Hex Shank Size
    5/64"1"25°Steel5464A3100000
    3/32"1"25°Steel5464A320000
    7/64"1"25°Steel5464A330000
    1/8"1"25°Steel5464A340000
    9/64"1"25°Steel5464A350000
    5/32"1"25°Steel5464A360000
    3/16"1"25°Steel5464A370000
    7/32"1"25°Steel5464A380000
    1/4"1"25°Steel5464A390000
    5/16"1 1/2"25°Steel5464A410000
    3/8"1 1/2"25°Steel5464A420000
    1/2"1 1/2"25°Steel5464A430000
    2 mm1"25°Steel5464A510000
    2.5 mm1"25°Steel5464A520000
    3 mm1"25°Steel5464A530000
    4 mm1"25°Steel5464A540000
    5 mm1"25°Steel5464A550000
    6 mm1"25°Steel5464A560000
    8 mm1 1/2"25°Steel5464A570000
    10 mm1 1/2"25°Steel5464A580000
    12 mm1 1/2"25°Steel5464A590000
     
    For Power Tools
    Image of Product. Quick-Change Hex Shank. Front orientation. Screwdriver Bits. Ball-Tip Hex Bits, For Power Tools.

    Quick-Change Hex Shank

    Image of Attribute. Front orientation. Contains Annotated.
     
    1/4" Quick-Change Hex Shank Size
    5/64"3"25°Steel5492A610000
    3/32"3"25°Steel5492A620000
    7/64"3"25°Steel5492A630000
    1/8"3"25°Steel5492A640000
    9/64"3"25°Steel5492A650000
    5/32"3"25°Steel5492A660000
    3/16"3"25°Steel5492A670000
    7/32"3"25°Steel5492A680000
    1/4"3"25°Steel5492A690000
    5/16"3"25°Steel5492A710000
    3/8"3"25°Steel5492A720000
    1/2"3"25°Steel5492A730000
    2 mm3"25°Steel5492A810000
    2.5 mm3"25°Steel5492A820000
    3 mm3"25°Steel5492A830000
    4 mm3"25°Steel5492A840000
    5 mm3"25°Steel5492A850000
    6 mm3"25°Steel5492A860000
    8 mm3"25°Steel5492A870000
    10 mm3"25°Steel5492A880000
    12 mm3"25°Steel5492A890000
     

    Hex Bits For Impact Drivers

    Tougher than your average hex bits. These have a thin, flexible section on the shank that absorbs 30 times the impact force. They are heat treated for hardness and manufactured to tight tolerances, so they won't snap or slip under high stress.
    Hex Shank—Use a bit adapter (not included) to attach these bits to power tools.
    Quick-Change Hex Shank—Lock these bits directly into power tools. They won't wobble as much as bits paired with an adapter, so they are the best choice for high-precision tasks.
    Steel—Best for dry environments, since moisture will cause these bits to rust.
    Wear-Resistant Diamond-Coated Steel—Diamond particles embedded in the tip bite into the screw head for a strong grip. Our most wear-resistant bits, these maintain their grip and shape, even when driving screws into tough materials.
    Drive
    Size
    Overall
    Lg.
    Material
    Each
    For Hand Tools
    Image of Product. Hex Shank. Front orientation. Screwdriver Bits. Hex Bits For Impact Drivers, For Hand Tools.

    Hex Shank

     
    1/4" Hex Shank Size
    1/8"1"Steel4641A2600000
    9/64"1"Steel4641A270000
    5/32"1"Steel4641A280000
    3/16"1"Steel4641A290000
    7/32"1"Steel4641A330000
    1/4"1"Steel4641A340000
    3 mm1"Diamond-Coated Steel4641A420000
    4 mm1"Diamond-Coated Steel4641A110000
    5 mm1"Diamond-Coated Steel4641A120000
    6 mm1"Diamond-Coated Steel4641A130000
     
    For Power Tools
    Image of Product. Quick-Change Hex Shank. Front orientation. Screwdriver Bits. Hex Bits For Impact Drivers, For Power Tools.

    Quick-Change Hex

    Shank

     
    1/4" Quick-Change Hex Shank Size
    1/8"2"Steel4641A350000
    9/64"2"Steel4641A360000
    5/32"2"Steel4641A370000
    3/16"2"Steel4641A380000
    7/32"2"Steel4641A390000
    1/4"2"Steel4641A410000
    3 mm2"Steel4641A250000
    4 mm2"Diamond-Coated Steel4641A1400000
    5 mm2"Diamond-Coated Steel4641A1500000
    6 mm2"Diamond-Coated Steel4641A1600000
     

    Screw-Holding Torx Bit Sets

    Image of Product. Front orientation. Screwdriver Bits. Screw-Holding Torx Bit Sets.
    Image of Product. Hex Shank. Front orientation. Screwdriver Bits. Screw-Holding Torx Bit Sets, For Hand Tools.
    Image of Product. Quick-Change Hex Shank. Front orientation. Screwdriver Bits. Screw-Holding Torx Bit Sets, For Power Tools.

    Hex Shank

    Quick-Change Hex

    Shank

    When you've only got one free hand to fasten, reach for these Torx bits. A tapered tip wedges deep into the screw head, so it won't fall off while you fasten. The bits in these sets are useful when working above crevices that screws could slip into. Also known as Torx-Align bits.
    Hex Shank—Also known as insert bits, these snap into hand tools. If you want to use them with power tools, attach a bit adapter (not included).
    Quick-Change Hex Shank—Lock these bits directly into power tools. They won't wobble as much as bits paired with an adapter, so they are the best choice for high-precision tasks.
    Steel—Best for dry environments, since moisture will cause these bits to rust.
    Components
    Included
    Bits Included
    Screw-Holding
    Mechanism
    Material
    Container
    Type
    Each
    For Hand Tools
     
    1/4" Hex Shank Size
    12 BitsTorx: T5, T6, T7, T8, T9, T10, T15, T20, T25, T27, T30, T40 (1" O'all Lg.)Wedge TipSteelPlastic Caddy6947A49000000
     
    For Power Tools
     
    1/4" Quick-Change Hex Shank Size
    10 BitsTorx: T6, T7, T8, T9, T10, T15, T20, T25, T27, T30 (2" O'all Lg.)Wedge TipSteelPlastic Caddy53275A3200000
     

    Tamper-Resistant Torx Bit Sets

    Image of Product. Hex Shank. Front orientation. Screwdriver Bits. Tamper-Resistant Torx Bit Sets, For Hand Tools.
    Image of Product. Quick-Change Hex Shank. Front orientation. Screwdriver Bits. Tamper-Resistant Torx Bit Sets, For Power Tools.

    Hex Shank

    Quick-Change Hex

    Shank

    Turn a variety of tamper-resistant Torx screws on electronic enclosures and other access-controlled equipment. The bits in these sets have six lobes that withstand high pressure without stripping the drive. Also known as pin-in-Torx bits.
    Hex Shank—Also known as insert bits, these snap into hand tools. If you want to use them with power tools, attach a bit adapter (not included).
    Quick-Change Hex Shank—Lock these bits directly into power tools. They won't wobble as much as bits paired with an adapter, so they are the best choice for high-precision tasks.
    Steel—Best for dry environments, since moisture will cause these bits to rust.
    Components
    Included
    Bits Included
    Material
    Container
    Type
    Each
    For Hand Tools
     
    1/4" Hex Shank Size
    7 BitsTamper-Resistant Torx: T7, T8, T9, T10, T15, T20, T25 (1" O'all Lg.)SteelPlastic Case7377A55000000
     
    For Power Tools
     
    1/4" Quick-Change Hex Shank Size
    10 BitsTamper-Resistant Torx: T7, T8, T9, T10, T15, T20, T25, T27, T30, T40 (2" O'all Lg.)SteelPlastic Caddy7233A8500000
     

    Ball-Tip Hex Bit Sets

    Image of Product. Hex Shank. Front orientation. Screwdriver Bits. Ball-Tip Hex Bit Sets, For Hand Tools.
    Image of Product. Quick-Change Hex Shank. Front orientation. Screwdriver Bits. Ball-Tip Hex Bit Sets, For Power Tools.
    Image of Attribute. Front orientation. Contains Annotated.

    Hex Shank

    Quick-Change

    Hex Shank

    Turn a variety hex screws even when you can't access them head on. A ball tip with six points of contact engages the drive at an angle without slipping. These bits are handy for reaching screws in corners and underneath machinery.
    Hex Shank—Also known as insert bits, these snap into hand tools. If you want to use them with power tools, attach a bit adapter (not included).
    Quick-Change Hex Shank—Lock these bits directly into power tools. They won't wobble as much as bits paired with an adapter, so they are the best choice for high-precision tasks.
    Steel—Best for dry environments, since moisture will cause these bits to rust.
    Components
    Included
    Bits Included
    Max. Access
    Angle
    Material
    Container
    Type
    Each
    For Hand Tools
     
    1/4" Hex Shank Size
    9 BitsHex: 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm (1" O'all Lg.)
    Hex: 8 mm, 10 mm, 12 mm (1 1/2" O'all Lg.)    		25°SteelPlastic Caddy5464A83000000
    12 BitsHex: 5/16", 3/8", 1/2" (1 1/2" O'all Lg.)
    Hex: 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4" (1" O'all Lg.)    		25°SteelPlastic Caddy5464A7500000
     
    For Power Tools
     
    1/4" Quick-Change Hex Shank Size
    9 BitsHex: 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm, 10 mm, 12 mm (3" O'all Lg.)25°SteelPlastic Caddy5492A9200000
    12 BitsHex: 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8", 1/2" (3" O'all Lg.)25°SteelPlastic Caddy5492A7500000
     

    Precise-Control Bit Sets

    Image of Product. Front orientation. Screwdriver Bits. Precise-Control Bit Sets.
    Make fine-tuned adjustments on a variety of small screws in electronics, miniature models, and microscopes. These bits have a knurled shank to twist with just your fingertips for pin-point precision. Use them to avoid stripping tiny screws or cracking fragile materials.
    Steel—Best for dry environments, since moisture will cause these bits to rust.
    Screwdriver Bits
    Replacement
    Screwdrivers
    No. of
    Pieces
    Components Included
    Bits Included
    Adapters Included
    Drive Tools Included
    Material
    Container
    Type
    Each
    Each
    For Hand Tools
     
    1/4" Knurled-End-Hex Shank Size
    271 Adapter
    1 Extension (3 1/2" Lg.)
    2 Drive Tools
    23 Bits    		Hex (Inch): 0.050", 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4" (1 1/4" O'all Lg.)
    Hex (Metric): 1.5 mm, 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm (1 1/4" O'all Lg.)
    Phillips: No. 1, No. 2 (1 3/8" O'all Lg.)
    Slotted: 3/16", 1/4", 3/8" (1 1/4" O'all Lg.)    		1/4" Male Square Drive × 1/4" Hex Shank Adapter3 3/4" Lg. Tight-Clearance Ratcheting Bit Screwdriver
    Screwdriver Handle    		SteelPlastic Case5399A160000005697A1200000
     
    Replacement Precise-Control Screwdriver Bits
    Drive
    Size
    Material
    Each
    Slotted
    3/16"Steel5697A7600000
    1/4"Steel5697A220000
    3/8"Steel5697A360000
     
    Phillips
    No. 1Steel5697A240000
    No. 2Steel5697A250000
     
    Hex
    0.050"Steel5697A310000
    1/16"Steel5697A320000
    5/64"Steel5697A130000
    3/32"Steel5697A140000
    7/64"Steel5697A750000
    1/8"Steel5697A150000
    9/64"Steel5697A330000
    5/32"Steel5697A160000
    3/16"Steel5697A170000
    7/32"Steel5697A180000
    1/4"Steel5697A190000
    1.5 mmSteel5697A510000
    2 mmSteel5697A520000
    2.5 mmSteel5697A530000
    3 mmSteel5697A540000
    4 mmSteel5697A550000
    5 mmSteel5697A560000
    6 mmSteel5697A770000
     

    Torx Bit Sets

    Image of Product. Hex Shank. Front orientation. Screwdriver Bits. Torx Bit Sets, For Hand Tools.
    Image of Product. Quick-Change Hex Shank. Front orientation. Screwdriver Bits. Torx Bit Sets, For Power Tools.

    Hex Shank

    Quick-Change

    Hex Shank

    Get a grip with less slip. The bits in these sets have a six-lobe shape that grips fasteners so they won't slip and damage the drive. Also known as star bits.
    Hex Shank—Also known as insert bits, these snap into hand tools. If you want to use them with power tools, attach a bit adapter (not included).
    Quick-Change Hex Shank—Lock these bits directly into power tools. They won't wobble as much as bits paired with an adapter, so they are the best choice for high-precision tasks.
    Steel—Best for dry environments, since moisture will cause these bits to rust.
    No. of
    Pieces
    Components
    Included
    Bits Included
    Adapters Included
    Material
    Container
    Type
    Each
    For Hand Tools
     
    1/4" Hex Shank Size
    77 BitsTorx: T10, T15, T20, T25, T30, T40 (1" O'all Lg.)—SteelPlastic Caddy7013A52000000
    231 Adapter
    22 Bits    		Torx: T5, T6, T7, T8, T9 (1" O'all Lg.)—1 ea.
    Torx: T10, T15, T20, T25, T27, T30, T40 (1" O'all Lg.)—2 ea.
    Torx: T45, T50, T55 (1 3/8" O'all Lg.)—1 ea.    		2 3/8" Lg. Bit Adapter for Power ToolsSteelPlastic Caddy7013A5600000
     
    For Power Tools
     
    1/4" Quick-Change Hex Shank Size
    1111 BitsTorx: T6, T7, T8, T9, T10, T15, T20, T25, T27, T30, T40 (2" O'all Lg.)—SteelPlastic Caddy7396A8100000
     

    Screw-Holding Ball-Tip Hex Bits

    Image of Product. Front orientation. Screwdriver Bits. Screw-Holding Ball-Tip Hex Bits.
    Image of Product. Retaining Ring. Front orientation. Screwdriver Bits. Screw-Holding Ball-Tip Hex Bits.

    Retaining

    Ring

    Image of Attribute. Front orientation. Contains Annotated.
    Turn hex screws in hard-to-reach places with just one hand. The ball tip has a retaining ring that grips screws so they won't fall off as you fasten. Also, the ball tip engages the screw drive at an angle to squeeze into tight spots.
    Quick-Change Hex Shank—Lock these bits directly into power tools. They won't wobble as much as bits paired with an adapter, so they are the best choice for high-precision tasks.
    Steel—Best for dry environments, since moisture will cause these bits to rust.
    Drive
    Size
    Overall
    Lg.
    Max. Access
    Angle
    Screw-Holding
    Mechanism
    Material
    Each
    For Power Tools
     
    1/4" Quick-Change Hex Shank Size
    1/8"2"20°Retaining RingSteel4538A4200000
    9/64"2"20°Retaining RingSteel4538A430000
    5/32"2"20°Retaining RingSteel4538A440000
    3/16"2"20°Retaining RingSteel4538A450000
    7/32"2"20°Retaining RingSteel4538A460000
    1/4"2"20°Retaining RingSteel4538A470000
    3 mm2"20°Retaining RingSteel4538A330000
    4 mm2"20°Retaining RingSteel4538A340000
    5 mm2"20°Retaining RingSteel4538A350000
    6 mm2"20°Retaining RingSteel4538A360000
     

    Tamper-Resistant Torx Bits

    These bits fit around the security pin to turn tamper-resistant Torx screws. Use them to unlock electronic enclosures and other access-controlled equipment. Their six lobes withstand high pressure without slipping and stripping the drive. Also known as pin-in-Torx bits.
    Hex Shank—Also known as insert bits, these snap into hand tools. If you want to use them with power tools, attach a bit adapter (not included).
    Quick-Change Hex Shank—Lock these bits directly into power tools. They won't wobble as much as bits paired with an adapter, so they are the best choice for high-precision tasks.
    Steel—Best for dry environments, since moisture will cause these bits to rust.
    Drive
    Size
    Overall
    Lg.
    Material
    Each
    For Hand Tools
    Image of Product. Hex Shank. Front orientation. Screwdriver Bits. Tamper-Resistant Torx Bits, For Hand Tools.

    Hex Shank

     
    1/4" Hex Shank Size
    T71"Steel7377A4100000
    T81"Steel7377A420000
    T91"Steel7377A430000
    T101"Steel7377A440000
    T151"Steel7377A450000
    T201"Steel7377A460000
    T251"Steel7377A470000
    T271"Steel7377A480000
    T301"Steel7377A490000
    T401"Steel7377A510000
     
    5/16" Hex Shank Size
    T401 1/4"Steel36575A310000
    T451 1/4"Steel36575A320000
    T501 1/4"Steel36575A330000
    T551 1/4"Steel36575A340000
     
    For Power Tools
    Image of Product. Quick-Change Hex Shank. Front orientation. Screwdriver Bits. Tamper-Resistant Torx Bits, For Power Tools.

    Quick-Change Hex Shank

     
    1/4" Quick-Change Hex Shank Size
    T72"Steel7233A840000
    T76"Steel7233A2100000
    T82"Steel7233A610000
    T86"Steel7233A2200000
    T92"Steel7233A620000
    T96"Steel7233A2300000
    T102"Steel7233A630000
    T106"Steel7233A7500000
    T152"Steel7233A640000
    T156"Steel7233A7600000
    T202"Steel7233A650000
    T206"Steel7233A7700000
    T252"Steel7233A660000
    T256"Steel7233A7800000
    T272"Steel7233A670000
    T276"Steel7233A7900000
    T302"Steel7233A680000
    T306"Steel7233A8100000
    T352"Steel7233A690000
    T356"Steel7233A8200000
    T402"Steel7233A710000
    T406"Steel7233A8300000
    T452"Steel7233A720000
    T456"Steel7233A2400000
    T502"Steel7233A730000
    T506"Steel7233A2500000
    T556"Steel7233A2600000
     

    Torx Plus Bit Sets

    Image of Product. Hex Shank. Front orientation. Screwdriver Bits. Torx Plus Bit Sets, For Hand Tools.
    Image of Product. Quick-Change Hex Shank. Front orientation. Screwdriver Bits. Torx Plus Bit Sets, For Power Tools.

    Hex Shank

    Quick-Change Hex

    Shank

    With larger lobes, the bits in these sets deliver more torque than Torx bits without slipping and stripping the drive. They have a similar profile to Torx but are not recommended for use with standard Torx screws.
    Hex Shank—Also known as insert bits, these snap into hand tools. If you want to use them with power tools, attach a bit adapter (not included).
    Quick-Change Hex Shank—Lock these bits directly into power tools. They won't wobble as much as bits paired with an adapter, so they are the best choice for high-precision tasks.
    Steel—Best for dry environments, since moisture will cause these bits to rust.
    No. of
    Pieces
    Components
    Included
    Bits Included
    Adapters Included
    Material
    Container
    Type
    Each
    For Hand Tools
     
    1/4" Hex Shank Size
    111 Adapter
    10 Bits    		Torx Plus: IP7, IP8, IP9, IP10, IP15, IP20, IP25, IP27, IP30, IP40 (1" O'all lg.)2 3/8" Lg. Bit Adapter for Power ToolsSteelPlastic Case54305A43000000
     
    For Power Tools
     
    1/4" Quick-Change Hex Shank Size
    1010 BitsTorx Plus: IP6, IP7, IP8, IP9, IP10, IP15, IP20, IP25, IP27, IP30 (2" O'all Lg.)—SteelPlastic Caddy3716A3600000
     

    Corrosion-Resistant Hex Bits

    Image of Product. Front orientation. Screwdriver Bits. Corrosion-Resistant Hex Bits.
    Turn stainless steel hex screws in areas exposed to moisture and chemicals. With solid stainless steel construction, these bits resist rusting and have no coating that could flake off and damage the screw drive. Their six contact points handle more torque than slotted and Phillips bits without slipping and stripping the drive.
    Quick-Change Hex Shank—Lock these bits directly into power tools. They won't wobble as much as bits paired with an adapter, so they are the best choice for high-precision tasks.
    Drive
    Size
    Overall
    Lg.
    Material
    Each
    For Power Tools
     
    1/4" Quick-Change Hex Shank Size
    3/32"3 1/2"Stainless Steel2784N15000000
    1/8"3 1/2"Stainless Steel2784N1700000
    5/32"3 1/2"Stainless Steel2784N1600000
    3/16"3 1/2"Stainless Steel2784N1800000
    3 mm3 1/2"Stainless Steel2784N1100000
    4 mm3 1/2"Stainless Steel2784N1200000
    5 mm3 1/2"Stainless Steel2784N1300000
    6 mm3 1/2"Stainless Steel2784N1400000
     

    Corrosion-Resistant Torx Bits

    Image of Product. Front orientation. Screwdriver Bits. Corrosion-Resistant Torx Bits.
    Turn stainless steel Torx screws in areas exposed to moisture and chemicals. With solid stainless steel construction, these bits resist rusting and have no coating that could flake off and damage the screw drive. Their six-lobe shape grips fasteners to prevent slipping. Also known as star bits.
    Hex Shank—Also known as insert bits, these snap into hand tools. If you want to use them with power tools, attach a bit adapter (not included).
    Drive
    Size
    Overall
    Lg.
    Material
    Each
    For Hand Tools
     
    1/4" Hex Shank Size
    T81"Stainless Steel2604N1100000
    T101"Stainless Steel2604N130000
    T151"Stainless Steel2604N140000
    T201"Stainless Steel2604N150000
    T251"Stainless Steel2604N160000
    T301"Stainless Steel2604N180000
    T401"Stainless Steel2604N190000
     

    Tamper-Resistant Hex Bits

    These bits fit around the security pin to turn tamper-resistant hex screws. Use them to unlock electronic enclosures and other access-controlled equipment. Their six contact points deliver more torque than slotted and Phillips bits without slipping and stripping the drive. Also known as pin-in-hex or pin-in-socket bits.
    Hex Shank—Also known as insert bits, these snap into hand tools. If you want to use them with power tools, attach a bit adapter (not included).
    Quick-Change Hex Shank—Lock these bits directly into power tools. They won't wobble as much as bits paired with an adapter, so they are the best choice for high-precision tasks.
    Steel—Best for dry environments, since moisture will cause these bits to rust.
    Drive
    Size
    Overall
    Lg.
    Material
    Each
    For Hand Tools
    Image of Product. Hex Shank. Front orientation. Screwdriver Bits. Tamper-Resistant Hex Bits, For Hand Tools.

    Hex Shank

     
    1/4" Hex Shank Size
    5/64"1"Steel7257A8500000
    3/32"1"Steel7257A630000
    7/64"1"Steel7257A640000
    1/8"1"Steel7257A220000
    9/64"1"Steel7257A270000
    5/32"1"Steel7257A230000
    3/16"1"Steel7257A240000
    7/32"1"Steel7257A250000
    1/4"1"Steel7257A280000
    5/16"1"Steel7257A290000
    3/8"1"Steel7257A310000
    2 mm1"Steel7257A110000
    2.5 mm1"Steel7257A510000
    3 mm1"Steel7257A520000
    4 mm1"Steel7257A530000
    5 mm1"Steel7257A540000
    6 mm1"Steel7257A550000
    8 mm1"Steel7257A560000
     
    For Power Tools
    Image of Product. Quick-Change Hex Shank. Front orientation. Screwdriver Bits. Tamper-Resistant Hex Bits, For Power Tools.

    Quick-Change Hex

    Shank

     
    1/4" Quick-Change Hex Shank Size
    3/32"2"Steel7240A310000
    7/64"2"Steel7240A320000
    1/8"2"Steel7240A330000
    1/8"6"Steel7240A410000
    9/64"2"Steel7240A340000
    9/64"6"Steel7240A420000
    5/32"2"Steel7240A350000
    5/32"6"Steel7240A430000
    3/16"2"Steel7240A360000
    3/16"6"Steel7240A440000
    7/32"2"Steel7240A370000
    7/32"6"Steel7240A450000
    1/4"2"Steel7240A380000
    1/4"6"Steel7240A460000
    5/16"2"Steel7240A390000
    5/16"6"Steel7240A4700000
    3/8"2"Steel7240A520000
    3/8"6"Steel7240A5300000
    2 mm3 1/2"Steel7240A110000
    2.5 mm2"Steel7240A650000
    3 mm2"Steel7240A660000
    4 mm2"Steel7240A670000
    5 mm2"Steel7240A680000
    6 mm2"Steel7240A690000
    8 mm2"Steel7240A710000
     

    High-Torque Torx Bits

    Image of Product. Front orientation. Screwdriver Bits. High-Torque Torx Bits.
    Heat treated for hardness, these are less likely to crack or deform under high torque than standard Torx bits. They are manufactured to tight tolerances to prevent slipping.
    Hex Shank—Also known as insert bits, these snap into hand tools. If you want to use them with power tools, attach a bit adapter (not included).
    Wear-Resistant Diamond-Coated Steel—Diamond particles embedded in the tip bite into the screw head for a strong grip. Our most wear-resistant bits, these maintain their grip and shape, even when driving screws into tough materials.
    Drive
    Size
    Overall
    Lg.
    Material
    Each
    For Hand Tools
     
    1/4" Hex Shank Size
    T101"Diamond-Coated Steel5983A6100000
    T151"Diamond-Coated Steel5983A620000
    T201"Diamond-Coated Steel5983A630000
    T251"Diamond-Coated Steel5983A640000
    T301"Diamond-Coated Steel5983A650000
    T401"Diamond-Coated Steel5983A660000
     

    Ball-Tip Torx Bits

    Image of Product. Front orientation. Screwdriver Bits. Ball-Tip Torx Bits.
    Image of Attribute. Front orientation. Contains Annotated.
    Turn Torx screws even when you can't access them head on. A ball tip with six wide lobes engages the drive at an angle without slipping. These bits are handy for reaching screws in corners and underneath machinery.
    Quick-Change Hex Shank—Lock these bits directly into power tools. They won't wobble as much as bits paired with an adapter, so they are the best choice for high-precision tasks.
    Steel—Best for dry environments, since moisture will cause these bits to rust.
    Drive
    Size
    Overall
    Lg.
    Max. Access
    Angle
    Material
    Each
    For Power Tools
     
    1/4" Quick-Change Hex Shank Size
    T102"20°Steel5044A1200000
    T152"20°Steel5044A130000
    T202"20°Steel5044A140000
    T252"20°Steel5044A150000
    T272"20°Steel5044A160000
    T302"20°Steel5044A170000
    T402"20°Steel5044A190000
     

    Screw-Holding Torx Bits

    When you've only got one free hand to fasten, reach for these Torx bits. A tapered tip wedges deep into the screw head, so it won't fall off while you fasten. These bits are useful when working above crevices that screws could slip into. Also known as Torx-Align bits.
    Hex Shank—Also known as insert bits, these snap into hand tools. If you want to use them with power tools, attach a bit adapter (not included).
    Quick-Change Hex Shank—Lock these bits directly into power tools. They won't wobble as much as bits paired with an adapter, so they are the best choice for high-precision tasks.
    Steel—Best for dry environments, since moisture will cause these bits to rust.
    Drive
    Size
    Overall
    Lg.
    Screw-Holding
    Mechanism
    Material
    Each
    For Hand Tools
    Image of Product. Hex Shank. Front orientation. Screwdriver Bits. Screw-Holding Torx Bits, For Hand Tools.

    Hex Shank

     
    1/4" Hex Shank Size
    T61"Wedge TipSteel6947A3600000
    T71"Wedge TipSteel6947A370000
    T81"Wedge TipSteel6947A380000
    T91"Wedge TipSteel6947A390000
    T101"Wedge TipSteel6947A410000
    T151"Wedge TipSteel6947A420000
    T201"Wedge TipSteel6947A430000
    T251"Wedge TipSteel6947A440000
    T301"Wedge TipSteel6947A460000
     
    5/16" Hex Shank Size
    T301 1/4"Wedge TipSteel6947A510000
    T401 1/4"Wedge TipSteel6947A520000
    T451 1/4"Wedge TipSteel6947A530000
     
    For Power Tools
    Image of Product. Quick-Change Hex Shank. Front orientation. Screwdriver Bits. Screw-Holding Torx Bits, For Power Tools.

    Quick-Change Hex

    Shank

     
    1/4" Quick-Change Hex Shank Size
    T62"Wedge TipSteel53275A1970000
    T72"Wedge TipSteel53275A1980000
    T82"Wedge TipSteel53275A1990000
    T92"Wedge TipSteel53275A2010000
    T102"Wedge TipSteel53275A1910000
    T152"Wedge TipSteel53275A1920000
    T202"Wedge TipSteel53275A1930000
    T252"Wedge TipSteel53275A1940000
    T272"Wedge TipSteel53275A1950000
    T302"Wedge TipSteel53275A1960000
     

    Screw-Holding Hex Bits

    Image of Product. Retaining Ring. Front orientation. Screw-Holding Hex Bits.

    Retaining

    Ring

    When you've only got one free hand to fasten, reach for these hex bits. They have a retaining ring on the tip to stop screws from falling off as you fasten. These bits are useful when working above crevices that screws could slip into.
    Hex Shank—Also known as insert bits, these snap into hand tools. If you want to use them with power tools, attach a bit adapter (not included).
    Quick-Change Hex Shank—Lock these bits directly into power tools. They won't wobble as much as bits paired with an adapter, so they are the best choice for high-precision tasks.
    Steel—Best for dry environments, since moisture will cause these bits to rust.
    Drive
    Size
    Overall
    Lg.
    Screw-Holding
    Mechanism
    Material
    Each
    For Hand Tools
    Image of Product. Hex Shank. Front orientation. Screwdriver Bits. Screw-Holding Hex Bits, For Hand Tools, Retaining Ring.

    Hex Shank

     
    1/4" Hex Shank Size
    1/8"1"Retaining RingSteel4309A2100000
    5/32"1"Retaining RingSteel4309A230000
    3/16"1"Retaining RingSteel4309A240000
    3 mm1"Retaining RingSteel4309A130000
    4 mm1"Retaining RingSteel4309A140000
    5 mm1"Retaining RingSteel4309A150000
    6 mm1"Retaining RingSteel4309A160000
     
    For Power Tools
    Image of Product. Quick-Change Hex Shank. Front orientation. Screwdriver Bits. Screw-Holding Hex Bits, For Power Tools, Retaining Ring.

    Quick-Change Hex

    Shank

     
    1/4" Quick-Change Hex Shank Size
    1/8"2"Retaining RingSteel4417A510000
    9/64"2"Retaining RingSteel4417A520000
    5/32"2"Retaining RingSteel4417A530000
    3/16"2"Retaining RingSteel4417A540000
    1/4"2"Retaining RingSteel4417A560000
    3 mm2"Retaining RingSteel4417A430000
    5 mm2"Retaining RingSteel4417A450000
     

    Reversible Tamper-Resistant Torx Bits

    Image of Product. Front orientation. Screwdriver Bits. Reversible Tamper-Resistant Torx Bits.
    Turn two sizes of tamper-resistant Torx screws with one bit. Their six-lobe shape grips fasteners so they won't slip and damage the drive. Use them to unlock electronic enclosures and other access-controlled equipment.
    Also known as insert bits, these snap into hand drivers.
    Steel—Best for dry environments, since moisture will cause these bits to rust.
    Ball-Detent Bit Holder—Bits with a ball detent are less likely to slip out of the holder than ones without. However, they don't slide in and out of the holder as easily.
    Drive
    Size
    Overall
    Lg.
    Material
    Bit-Holding
    Mechanism
    Each
    For Hand Tools
     
    5/16" Reversible-Hex Shank Size
    T8 x T102 7/8"SteelBall Detent36565A82000000
    T15 x T202 7/8"SteelBall Detent36565A8300000
     

    Tamper-Resistant Hex Bit Sets

    Image of Product. Hex Shank. Front orientation. Screwdriver Bits. Tamper-Resistant Hex Bit Sets, For Hand Tools.
    Image of Product. Quick-Change Hex Shank. Front orientation. Screwdriver Bits. Tamper-Resistant Hex Bit Sets, For Power Tools.

    Hex Shank

    Quick-Change Hex

    Shank

    Turn a variety of tamper-resistant hex screws on electronic enclosures and other access-controlled equipment. Their six contact points deliver more torque than slotted and Phillips bits without slipping and stripping the drive. Also known as pin-in-hex or pin-in-socket bits.
    Hex Shank—Also known as insert bits, these snap into hand tools. If you want to use them with power tools, attach a bit adapter (not included).
    Quick-Change Hex Shank—Lock these bits directly into power tools. They won't wobble as much as bits paired with an adapter, so they are the best choice for high-precision tasks.
    Steel—Best for dry environments, since moisture will cause these bits to rust.
    Components
    Included
    Bits Included
    Material
    Container
    Type
    Each
    For Hand Tools
     
    1/4" Hex Shank Size
    6 BitsTamper-Resistant Hex: 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm (1" O'all Lg.)SteelPlastic Caddy7257A61000000
    11 BitsTamper-Resistant Hex: 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8" (1" O'all Lg.)SteelPlastic Pouch7257A4100000
     
    For Power Tools
     
    1/4" Quick-Change Hex Shank Size
    6 BitsTamper-Resistant Hex: 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm (2" O'all Lg.)SteelPlastic Caddy7240A7400000
    8 BitsTamper-Resistant Hex: 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4" (2" O'all Lg.)SteelPlastic Caddy7240A5500000
     

    Reversible Torx Bits

    Image of Product. Without Ball Detent. Front orientation. Screwdriver Bits. Reversible Torx Bits, For Hand Tools.

    Without Ball Detent

    Image of Product. With Ball Detent. Front orientation. Screwdriver Bits. Reversible Torx Bits, For Hand Tools, Ball-Detent Bit Holder.

    With Ball Detent

    Flip these bits around to drive a different size Torx screw. Their six-lobe shape grips fasteners so they won't slip and damage the drive.
    Also known as insert bits, these snap into hand drivers.
    Steel—Best for dry environments, since moisture will cause these bits to rust.
    Ball-Detent Bit Holder—Bits with a ball detent are less likely to slip out of the holder than ones without. However, they don't slide in and out of the holder as easily.
    Drive
    Size
    Overall
    Lg.
    Material
    Bit-Holding
    Mechanism
    Each
    For Hand Tools
     
    1/4" Reversible-Hex Shank Size
    T6 x T71 1/4"SteelBall Detent5645A5400000
    T6 x T72 1/2"SteelBall Detent5645A470000
    T8 x T101 1/2"SteelBall Detent5645A480000
    T8 x T102 1/2"SteelBall Detent5645A490000
    T15 x T202"Steel—5645A420000
     
    5/16" Reversible-Hex Shank Size
    T8 x T102 7/8"SteelBall Detent36565A810000
    T15 x T202 3/4"SteelBall Detent36565A920000
    T25 x T302 5/8"SteelBall Detent36565A930000
     

    Torx Bits For Impact Drivers

    Tougher than your average Torx bits. These have a thin, flexible section on the shank that absorbs 30 times the impact force. They are heat treated for hardness and manufactured to tight tolerances, so they won't snap or slip under high stress.
    Hex Shank—Use a bit adapter (not included) to attach these bits to power tools.
    Quick-Change Hex Shank—Lock these bits directly into power tools. They won't wobble as much as bits paired with an adapter, so they are the best choice for high-precision tasks.
    Steel—Best for dry environments, since moisture will cause these bits to rust.
    Wear-Resistant Diamond-Coated Steel—Diamond particles embedded in the tip bite into the screw head for a strong grip. Our most wear-resistant bits, these maintain their grip and shape, even when driving screws into tough materials.
    Drive
    Size
    Overall
    Lg.
    Material
    Each
    For Hand Tools
    Image of Product. Hex Shank. Front orientation. Screwdriver Bits. Torx Bits For Impact Drivers, For Hand Tools.

    Hex Shank

     
    1/4" Hex Shank Size
    T101"Diamond-Coated Steel4584A2200000
    T151"Diamond-Coated Steel4584A230000
    T201"Diamond-Coated Steel4584A240000
    T251"Diamond-Coated Steel4584A110000
    T271"Steel4584A210000
    T301"Diamond-Coated Steel4584A120000
    T401"Diamond-Coated Steel4584A130000
     
    For Power Tools
    Image of Product. Quick-Change Hex Shank. Front orientation. Screwdriver Bits. Torx Bits For Impact Drivers, For Power Tools.

    Quick-Change Hex

    Shank

     
    1/4" Quick-Change Hex Shank Size
    T102"Steel4584A170000
    T152"Steel4584A180000
    T202"Diamond-Coated Steel4584A2500000
    T252"Diamond-Coated Steel4584A1400000
    T272"Steel4584A190000
    T302"Diamond-Coated Steel4584A1500000
    T402"Diamond-Coated Steel4584A1600000
     
    back to top