McMaster-Carr logo
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    29 Products

    Nonmagnetic L-Keys

    Image of Product. Front orientation. L-Keys. Nonmagnetic L-Keys.
    Fasten screws in everything from MRI machines to semiconductor equipment without worrying about magnetic interference. These L-keys are made from nonmagnetic titanium, so they won't damage electrical components or attract loose metal parts and shavings in your toolbox. With the best strength-to-weight ratio of all our L-keys, they're as strong as steel to resist bending under high torque and weigh up to 50% less.
    Long—The most common option, these L-keys have a balanced length for everyday reach and torque.
    Length
    Drive
    Size
    Overall
    Relative
    Long
    Leg
    Short
    Leg
    Finish
    Each
    Titanium
     
    Hex
    0.050"1 13/16"Long1 3/4"1/2"__53945A21000000
    1/16"1 7/8"Long1 13/16"5/8"__53945A2200000
    5/64"2 1/16"Long2"11/16"__53945A2300000
    3/32"2 1/4"Long2 1/8"3/4"__53945A2400000
    7/64"2 3/8"Long2 1/4"3/4"__53945A2500000
    1/8"2 9/16"Long2 7/16"7/8"__53945A2600000
    9/64"2 7/8"Long2 3/4"15/16"__53945A2700000
    5/32"3 1/16"Long2 7/8"1"__53945A2800000
    3/16"3 3/16"Long3"1 1/4"__53945A2900000
    7/32"3 9/16"Long3 5/16"1 5/16"__53945A3100000
    1/4"3 7/8"Long3 5/8"1 1/2"__53945A3200000
    5/16"4 5/16"Long4"1 3/4"__53945A3300000
    3/8"4 7/8"Long4 1/2"2"__53945A3400000
    1.5 mm1 15/16"Long1 7/8"9/16"__53945A4100000
    2 mm2"Long1 15/16"3/4"__53945A4200000
    2.5 mm2 1/8"Long2"7/8"__53945A4300000
    3 mm2 5/16"Long2 3/16"7/8"__53945A4400000
    4 mm2 3/8"Long2 1/4"15/16"__53945A4500000
    5 mm2 11/16"Long2 1/2"15/16"__53945A4600000
    6 mm3 1/4"Long3"1"__53945A4700000
    8 mm3 13/16"Long3 1/2"1 3/8"__53945A4800000
    10 mm4 15/16"Long4 1/2"2"__53945A4900000
     

    Nonmagnetic Screwdrivers

    Image of Product. Front orientation. Screwdrivers. Nonmagnetic Screwdrivers.
    These drivers safely fasten screws on everything from MRI machines to semiconductor equipment without getting pulled inside by strong magnetic forces. The grade 5 titanium shaft is nonmagnetic and resistant to many chemicals.
    Also ideal for industrial maintenance, these no-frills screwdrivers withstand years of heavy use in the shop and on the jobsite. The hard plastic handle won't crack or wear out from drops and scrapes. It's also easy to wipe down and won't get sticky or gummy when exposed to oils or chemicals, unlike a soft handle.
    Standard Length—The most common screwdriver length for a specific drive size.
    Premium—The best screwdrivers available, with tips machined to tight tolerances for the tightest possible fit in fastener recesses. The snug fit means they'll turn screws quickly without wearing screw heads and the driver's tip.
    Shaft
    Drive Size,
    mm
    Relative
    Lg.
    Overall
    Lg.
    Lg.
    Overall
    Wd.
    Material
    Mfr.
    Each
    Hex
     
    Premium
    2Standard4 3/4"3"3/32"TitaniumImprex International54035A12000000
    3Standard5 1/4"3"5/32"TitaniumImprex International54035A1300000
    4Standard6 1/4"3"3/16"TitaniumImprex International54035A1400000
    5Standard6 1/4"3"1/4"TitaniumImprex International54035A1500000
    6Standard7 1/4"4"5/16"TitaniumImprex International54035A1600000
    7Standard7 1/4"4"3/8"TitaniumImprex International54035A17000000
    8Standard7 1/2"6"3/8"TitaniumImprex International54035A18000000
     
    back to top