McMaster-Carr logo
    Filter by
    System of Measurement
    Thread Size
    Industrial Info Snippet
    DFARS Specialty Metals
    Industrial Info Compare
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    U.S.–Mexico–Canada Agreement (USMCA) Qualifying
    For Keyway Diameter
    Screw Size
    Industrial Info Snippet
    Mounting Screw Size
    Industrial Info Snippet
    Head Length
    For Machine Table T-Slot Width
    Head Height
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    96 Products

    Rounded Machine Keys

    Image of Product. Front orientation. Machine Keys. Rounded Machine Keys.
    When installed, these keys fill oval keyways completely, reducing stress on the key and shaft. Using them in a closed keyway keeps them from sliding along the shaft axis. The rounded ends make it easy to slide gears, hubs, and other components into place. These are also known as feather keys. Machine keys are often the same material as the shaft and other components with which they are used. To use a key as a sacrificial part, choose a softer key that will shear off when parts are exposed to excessive force, preventing damage to expensive equipment.
    1008-1045 Carbon Steel—Steel keys are strong and easy to machine. Since steel is the most common material, these keys work in many applications. Steel keys rust when exposed to moisture, so they should only be used in dry environments.
    Zinc-Plated 1008-1045 Carbon Steel— Zinc-plated steel keys resist corrosion in wet environments.
    Oversized Tolerance—Slightly larger than the size listed in the table, oversized keys fit tightly in a keyway. Press them into place for use in high-torque applications or to replace a key in a worn keyway.
    Undersized Tolerance—Slightly smaller than the size listed in the table, undersized keys are the choice when you need a slightly looser fit or when you have an inconsistent keyway. Use them when parts need to be taken apart frequently, such as for maintenance or prototyping. Undersized metric keys meet DIN 6885 dimensional standards.
    ASME B17.1 Class 1 and ASME B17.1 Class 2—Keys that meet ASME B17.1 specifications conform to ASME standards for dimensions and tolerances.
    Tolerance
    Lg.
    Tolerance
    Rating
    Ht.
    Wd.
    Min.
    Hardness
    Specs. Met
    Pkg.
    Qty.
    Pkg.
    1008-1045 Carbon Steel
     
    1/2" × 1/2"
    1"Oversized0.000" to 0.002"0.000" to 0.002"Rockwell B50—198870A60500000
    1"Undersized-0.002" to 0.000"-0.002" to 0.000"Not RatedASME B17.1 Class 1598870A62900000
    1 1/2"Oversized0.000" to 0.001"0.000" to 0.001"Not RatedASME B17.1 Class 2198870A9590000
    1 1/2"Undersized-0.002" to 0.000"-0.002" to 0.000"Not RatedASME B17.1 Class 1598870A52200000
    1 5/8"Oversized0.000" to 0.001"0.000" to 0.001"Not RatedASME B17.1 Class 2198870A9690000
    1 5/8"Undersized-0.002" to 0.000"-0.002" to 0.000"Not RatedASME B17.1 Class 1598870A62700000
    2"Oversized0.000" to 0.002"0.000" to 0.002"Rockwell B50—198870A6100000
    2"Undersized-0.002" to 0.000"-0.002" to 0.000"Not RatedASME B17.1 Class 1598870A87600000
    2 1/2"Oversized0.000" to 0.001"0.000" to 0.001"Not RatedASME B17.1 Class 2198870A6970000
    2 1/2"Oversized0.000" to 0.002"0.000" to 0.002"Rockwell B50—198870A6150000
    3"Oversized0.000" to 0.002"0.000" to 0.002"Rockwell B50—198870A6200000
    3"Undersized-0.002" to 0.000"-0.002" to 0.000"Not RatedASME B17.1 Class 1198870A9170000
    3 1/2"Oversized0.000" to 0.002"0.000" to 0.002"Rockwell B50—198870A6250000
    3 1/2"Undersized-0.002" to 0.000"-0.002" to 0.000"Not RatedASME B17.1 Class 1198870A9120000
     
    Zinc-Plated 1008-1045 Carbon Steel
     
    1/2" × 1/2"
    1 1/2"Undersized-0.002" to 0.000"-0.002" to 0.000"Not RatedASME B17.1 Class 1195053A9910000
     

    Machine Keys

    Image of Product. Front orientation. Machine Keys. Machine Keys.
    Straight keys, with a square or rectangular cross section, are the most common type of key. Install them in keyways to transmit torque from shafts to gears and other components. Machine keys are often the same material as the shaft and other components with which they are used. To use a key as a sacrificial part, choose a softer key that will shear off when parts are exposed to excessive force, preventing damage to expensive equipment.
    1008-1045 Carbon Steel—Steel keys are strong and easy to machine. Since steel is the most common material, these keys work in many applications. Steel keys rust when exposed to moisture, so they should only be used in dry environments.
    Oversized Tolerance—Slightly larger than the size listed in the table, oversized keys fit tightly in a keyway. Press them into place for use in high-torque applications or to replace a key in a worn keyway.
    Undersized Tolerance—Slightly smaller than the size listed in the table, undersized keys are the choice when you need a slightly looser fit or when you have an inconsistent keyway. Use them when parts need to be taken apart frequently, such as for maintenance or prototyping.
    ASME B17.1 Class 1 and ASME B17.1 Class 2—Keys that meet ASME B17.1 specifications conform to ASME standards for dimensions and tolerances.
    Tolerance
    Lg.
    Tolerance
    Rating
    Ht.
    Wd.
    Min.
    Hardness
    Specs. Met
    Pkg.
    Qty.
    Pkg.
    1008-1045 Carbon Steel
     
    1/2" × 1/2"
    1"Oversized0.000" to 0.002"0.000" to 0.002"Rockwell B50—198870A48000000
    1"Undersized-0.002" to 0.000"-0.002" to 0.000"Rockwell B50ASME B17.1 Class 1198870A3410000
    1 1/2"Undersized-0.002" to 0.000"-0.002" to 0.000"Rockwell B50ASME B17.1 Class 1598870A29200000
    1 5/8"Oversized0.000" to 0.002"0.000" to 0.002"Rockwell B50—598870A48500000
    1 5/8"Undersized-0.002" to 0.000"-0.002" to 0.000"Not RatedASME B17.1 Class 1598870A3360000
    2"Oversized0.000" to 0.002"0.000" to 0.002"Rockwell B50—598870A49000000
    2"Undersized-0.002" to 0.000"-0.002" to 0.000"Rockwell B50ASME B17.1 Class 1598870A29300000
    2 1/2"Oversized0.000" to 0.001"0.000" to 0.001"Not RatedASME B17.1 Class 2598870A32500000
    2 1/2"Undersized-0.002" to 0.000"-0.002" to 0.000"Rockwell B50ASME B17.1 Class 1598870A29400000
    3"Undersized-0.002" to 0.000"-0.002" to 0.000"Rockwell B97ASME B17.1 Class 1598870A29600000
    3 1/2"Undersized-0.002" to 0.000"-0.002" to 0.000"Rockwell B97ASME B17.1 Class 1598870A29800000
     

    Machine Key Stock

    Cut this square or rectangular key stock to length to create a straight machine key. Straight keys are the most common type of key. Machine keys are often the same material as the shaft and other components with which they are used. To use a key as a sacrificial part, choose a softer key that will shear off when parts are exposed to excessive force, preventing damage to expensive equipment.
    1008-1045 Carbon Steel
    Image of Product. Front orientation. Machine Key Stock. Machine Key Stock.
    1008-1045 carbon steel key stock is an economical choice with good strength.
    Oversized Tolerance—Slightly larger than the size listed in the table, oversized stock fits tightly in a keyway. Press it into place for use in high-torque applications or to replace a key in a worn keyway.
    Undersized Tolerance—Slightly smaller than the size listed in the table, undersized stock is the choice when you need a slightly looser fit or when you have an inconsistent keyway. Use it when parts need to be taken apart frequently, such as for maintenance or prototyping.
    Tolerance
    Ht. × Wd.
    Tolerance
    Rating
    Ht.
    Wd.
    Min.
    Hardness
    Each
    12" Long
    1/4" × 1/2"Oversized0.000" to 0.003"0.000" to 0.003"Rockwell B5098830A53300000
    1/4" × 1/2"Undersized-0.003" to 0.000"-0.003" to 0.000"Rockwell B5098830A5340000
    3/8" × 1/2"Oversized0.000" to 0.003"0.000" to 0.003"Rockwell B5098830A3050000
    3/8" × 1/2"Undersized-0.003" to 0.000"-0.003" to 0.000"Rockwell B5098830A1490000
    1/2" × 1/2"Oversized0.000" to 0.002"0.000" to 0.002"Rockwell B5098830A3500000
    1/2" × 1/2"Undersized-0.002" to 0.000"-0.002" to 0.000"Rockwell B5098830A5420000
     
    36" Long
    1/2" × 1/2"Oversized0.000" to 0.002"0.000" to 0.002"Rockwell B5098830A91100000
    1/2" × 1/2"Undersized-0.002" to 0.000"-0.002" to 0.000"Rockwell B5098830A54300000
     
    72" Long
    1/2" × 1/2"Oversized0.000" to 0.002"0.000" to 0.002"Rockwell B5098830A63000000
     
    Zinc-Plated 1008-1045 Carbon Steel
    Image of Product. Front orientation. Machine Key Stock. Machine Key Stock.
    Zinc-plated 1008-1045 carbon steel key stock is an economical choice with good strength and resists corrosion in wet environments.
    Oversized Tolerance—Slightly larger than the size listed in the table, oversized stock fits tightly in a keyway. Press it into place for use in high-torque applications or to replace a key in a worn keyway.
    Undersized Tolerance—Slightly smaller than the size listed in the table, undersized stock is the choice when you need a slightly looser fit or when you have an inconsistent keyway. Use it when parts need to be taken apart frequently, such as for maintenance or prototyping.
    Tolerance
    Ht. × Wd.
    Tolerance
    Rating
    Ht.
    Wd.
    Min.
    Hardness
    Each
    12" Long
    1/8" × 1/2"Oversized0.000" to 0.003"0.000" to 0.003"Rockwell B5098491A106000000
    3/16" × 1/2"Oversized0.000" to 0.003"0.000" to 0.003"Rockwell B5098491A12100000
    1/4" × 1/2"Oversized0.000" to 0.003"0.000" to 0.003"Rockwell B5098491A1400000
    1/4" × 1/2"Undersized-0.003" to 0.000"-0.003" to 0.000"Rockwell B5098510A1810000
    5/16" × 1/2"Oversized0.000" to 0.003"0.000" to 0.003"Rockwell B5098491A15300000
    5/16" × 1/2"Undersized-0.003" to 0.000"-0.003" to 0.000"Rockwell B5098510A1820000
    3/8" × 1/2"Oversized0.000" to 0.003"0.000" to 0.003"Rockwell B5098491A1670000
    3/8" × 1/2"Undersized-0.003" to 0.000"-0.003" to 0.000"Rockwell B5098510A1840000
    7/16" × 1/2"Oversized0.000" to 0.003"0.000" to 0.003"Rockwell B5098491A1800000
    7/16" × 1/2"Undersized-0.003" to 0.000"-0.003" to 0.000"Rockwell B5098510A18600000
    1/2" × 1/2"Oversized0.000" to 0.002"0.000" to 0.002"Rockwell B5098491A1870000
    1/2" × 1/2"Undersized-0.002" to 0.000"-0.002" to 0.000"Rockwell B5098510A1870000
     
    36" Long
    3/8" × 1/2"Undersized-0.003" to 0.000"-0.003" to 0.000"Rockwell B5098491A42400000
    1/2" × 1/2"Oversized0.000" to 0.002"0.000" to 0.002"Rockwell B5098491A42700000
    1/2" × 1/2"Undersized-0.002" to 0.000"-0.002" to 0.000"Rockwell B5098491A42800000
     
    1095 Spring Steel
    Image of Product. Front orientation. Machine Key Stock. Machine Key Stock.
    1095 spring steel key stock is an economical choice with good strength.
    Tolerance
    Ht. × Wd.
    Tolerance
    Rating
    Ht.
    Wd.
    Min.
    Hardness
    Each
    12" Long
    1/4" × 1/2"Standard-0.001" to 0.001"-0.001" to 0.001"Rockwell B9098535A156000000
    5/16" × 1/2"Standard-0.001" to 0.001"-0.001" to 0.001"Rockwell B9098535A16400000
    3/8" × 1/2"Standard-0.001" to 0.001"-0.001" to 0.001"Rockwell B9098535A17200000
    7/16" × 1/2"Standard-0.001" to 0.001"-0.001" to 0.001"Rockwell B9098535A18400000
    1/2" × 1/2"Standard-0.001" to 0.001"-0.001" to 0.001"Rockwell B9098535A19000000
     
    36" Long
    1/2" × 1/2"Standard-0.001" to 0.001"-0.001" to 0.001"Rockwell B9098535A59000000
     
    8630 Alloy Steel
    Image of Product. Front orientation. Machine Key Stock. Machine Key Stock.
    8630 alloy steel key stock is an economical choice with good strength.
    Oversized Tolerance—Slightly larger than the size listed in the table, oversized stock fits tightly in a keyway. Press it into place for use in high-torque applications or to replace a key in a worn keyway.
    Undersized Tolerance—Slightly smaller than the size listed in the table, undersized stock is the choice when you need a slightly looser fit or when you have an inconsistent keyway. Use it when parts need to be taken apart frequently, such as for maintenance or prototyping.
    ASME B17.1 Class 2—Key stock that meets ASME B17.1 Class 2 specifications conforms to ASME standards for dimensions and tolerances.
    Tolerance
    Ht. × Wd.
    Tolerance
    Rating
    Ht.
    Wd.
    Min.
    Hardness
    Specs. Met
    Each
    12" Long
    1/2" × 1/2"Oversized0.000" to 0.001"0.000" to 0.001"Rockwell B50ASME B17.1 Class 299020A44000000
    1/2" × 1/2"Undersized-0.002" to 0.000"-0.002" to 0.000"Not Rated—99020A58500000
     
    18-8 Stainless Steel
    Image of Product. Front orientation. Machine Key Stock. Machine Key Stock.
    18-8 stainless steel key stock offers a balance of strength and corrosion resistance. It may be mildly magnetic. 18-8 stainless steel key stock is more corrosion resistant than steel key stock.
    Oversized Tolerance—Slightly larger than the size listed in the table, oversized stock fits tightly in a keyway. Press it into place for use in high-torque applications or to replace a key in a worn keyway.
    Undersized Tolerance—Slightly smaller than the size listed in the table, undersized stock is the choice when you need a slightly looser fit or when you have an inconsistent keyway. Use it when parts need to be taken apart frequently, such as for maintenance or prototyping.
    Tolerance
    Ht. × Wd.
    Tolerance
    Rating
    Ht.
    Wd.
    Min.
    Hardness
    Each
    12" Long
    3/16" × 1/2"Standard-0.008" to 0.008"-0.015" to 0.015"Rockwell B8092530A118000000
    1/4" × 1/2"Standard-0.008" to 0.008"-0.015" to 0.015"Rockwell B8092530A13700000
    3/8" × 1/2"Standard-0.008" to 0.008"-0.015" to 0.015"Rockwell B8092530A16600000
    1/2" × 1/2"Oversized0.000" to 0.003"0.000" to 0.003"Rockwell B8298493A18700000
    1/2" × 1/2"Undersized-0.004" to 0.000"-0.004" to 0.000"Rockwell B8292530A18700000
     
    36" Long
    1/2" × 1/2"Oversized0.000" to 0.003"0.000" to 0.003"Rockwell B8292530A32100000
    1/2" × 1/2"Undersized-0.004" to 0.000"-0.004" to 0.000"Rockwell B8292530A32200000
     
    316/316L Stainless Steel
    Image of Product. Front orientation. Machine Key Stock. Machine Key Stock.
    316/316L stainless steel key stock has the best corrosion resistance of our stainless steel key stock and may be mildly magnetic. 316/316L stainless steel key stock is more corrosion resistant than steel key stock.
    Oversized Tolerance—Slightly larger than the size listed in the table, oversized stock fits tightly in a keyway. Press it into place for use in high-torque applications or to replace a key in a worn keyway.
    Undersized Tolerance—Slightly smaller than the size listed in the table, undersized stock is the choice when you need a slightly looser fit or when you have an inconsistent keyway. Use it when parts need to be taken apart frequently, such as for maintenance or prototyping.
    Tolerance
    Ht. × Wd.
    Tolerance
    Rating
    Ht.
    Wd.
    Min.
    Hardness
    Each
    12" Long
    1/4" × 1/2"Oversized0.000" to 0.003"0.000" to 0.003"Not Rated98530A494000000
    1/4" × 1/2"Undersized-0.003" to 0.000"-0.003" to 0.000"Rockwell B8698530A14000000
    3/8" × 1/2"Oversized0.000" to 0.003"0.000" to 0.003"Not Rated98530A59400000
    3/8" × 1/2"Undersized-0.003" to 0.000"-0.003" to 0.000"Rockwell B8698530A16700000
    1/2" × 1/2"Oversized0.000" to 0.003"0.000" to 0.003"Not Rated98530A49200000
    1/2" × 1/2"Undersized-0.003" to 0.000"-0.003" to 0.000"Rockwell B8698530A18700000
     
    36" Long
    1/2" × 1/2"Undersized-0.003" to 0.000"-0.003" to 0.000"Rockwell B8698530A430000000
     
    416 Stainless Steel
    Image of Product. Front orientation. Machine Key Stock. Machine Key Stock.
    416 stainless steel key stock is stronger than other stainless key stock and can be heat treated for extra strength. It's corrosion resistant and magnetic. 416 stainless steel key stock is more corrosion resistant than steel key stock.
    Undersized Tolerance—Slightly smaller than the size listed in the table, undersized stock is the choice when you need a slightly looser fit or when you have an inconsistent keyway. Use it when parts need to be taken apart frequently, such as for maintenance or prototyping.
    Tolerance
    Ht. × Wd.
    Tolerance
    Rating
    Ht.
    Wd.
    Min.
    Hardness
    Each
    12" Long
    1/2" × 1/2"Undersized-0.003" to 0.000"-0.003" to 0.000"Rockwell B8699374A140000000
     
    400 Nickel
    Image of Product. Front orientation. Machine Key Stock. Machine Key Stock.
    400 nickel key stock is the most corrosion resistant key stock in our offering and can be used in highly corrosive environments, such as those involving salt water, sulfuric acid, and alkalies. For complete corrosion resistance, 400 nickel keys are typically used with 400 nickel machine parts. Comparable to Monel, 400 nickel is also known for its strength and weldability.
    Undersized Tolerance—Slightly smaller than the size listed in the table, undersized stock is the choice when you need a slightly looser fit or when you have an inconsistent keyway. Use it when parts need to be taken apart frequently, such as for maintenance or prototyping.
    Tolerance
    Ht. × Wd.
    Tolerance
    Rating
    Ht.
    Wd.
    Min.
    Hardness
    Each
    12" Long
    1/2" × 1/2"Undersized-0.002" to 0.000"-0.002" to 0.000"Rockwell B614428N170000000
     
    36" Long
    1/2" × 1/2"Undersized-0.002" to 0.000"-0.002" to 0.000"Rockwell B614428N18000000
     
    360 Brass
    Image of Product. Front orientation. Machine Key Stock. Machine Key Stock.
    360 brass key stock is corrosion resistant and nonmagnetic. 360 brass is softer than other metals, so it's often used for shear keys.
    Tolerance
    Ht. × Wd.
    Tolerance
    Rating
    Ht.
    Wd.
    Min.
    Hardness
    Each
    12" Long
    1/2" × 1/2"Standard-0.0035" to 0.0035"-0.0035" to 0.0035"Rockwell B3598500A187000000
     
    36" Long
    1/2" × 1/2"Standard-0.0035" to 0.0035"-0.0035" to 0.0035"Rockwell B3598500A18800000
     
    6061 Aluminum
    Image of Product. Front orientation. Machine Key Stock. Machine Key Stock.
    6061 aluminum key stock is one-third the weight of steel key stock, but not as strong. It resists corrosion and is nonmagnetic.
    Tolerance
    Ht. × Wd.
    Tolerance
    Rating
    Ht.
    Wd.
    Min.
    Hardness
    Each
    12" Long
    1/2" × 1/2"Standard-0.009" to 0.009"-0.009" to 0.009"Not Rated99108A120000000
     
    Nylon 6/6
    Image of Product. Front orientation. Machine Key Stock. Machine Key Stock.
    Nylon 6/6 key stock is slippery and wear resistant.
    Undersized Tolerance—Slightly smaller than the size listed in the table, undersized stock is the choice when you need a slightly looser fit or when you have an inconsistent keyway. Use it when parts need to be taken apart frequently, such as for maintenance or prototyping.
    Tolerance
    Ht. × Wd.
    Tolerance
    Rating
    Ht.
    Wd.
    Min.
    Hardness
    Each
    12" Long
    1/2" × 1/2"Undersized-0.003" to 0.000"-0.003" to 0.000"Durometer 80D94446A946000000
     

    Tapered Gib Keys

    Image of Attribute. Front orientation. Contains Annotated. Tapered Gib Keys.
    These keys have a tapered body that wedges in to the keyway for a more secure fit than standard machine keys. The gib head makes these keys easy to remove when parts need to be taken apart frequently, such as for maintenance or prototyping. Keys are tapered along their length. Use them to connect gears and other components with tapered keyways to shafts. Keys are made of steel.
    Inch—The height of inch keys decreases by 1/8" for every 12" of length. They conform to ASME B17.1 Class 1 standards for dimensions and tolerances.
    Tolerance
    Head
    Lg.
    Ht.
    Wd.
    Ht.
    Lg.
    End
    Ht.
    Rate of
    Taper
    Specs. Met
    System of
    Measurement
    Each
    1018-1045 Carbon Steel
     
    1/2" × 1/2"
    2"-0.002" to 0.000"-0.002" to 0.000"3/4"5/8"0.484"1:96ASME B17.1 Class 1Inch98471A23700000
    2 1/2"-0.002" to 0.000"-0.002" to 0.000"3/4"5/8"0.479"1:96ASME B17.1 Class 1Inch98471A2380000
    3"-0.002" to 0.000"-0.002" to 0.000"3/4"5/8"0.474"1:96ASME B17.1 Class 1Inch98471A2390000
    3 1/2"-0.002" to 0.000"-0.002" to 0.000"3/4"5/8"0.469"1:96ASME B17.1 Class 1Inch98471A2400000
    4"-0.002" to 0.000"-0.002" to 0.000"3/4"5/8"0.464"1:96ASME B17.1 Class 1Inch98471A2410000
    4 1/2"-0.002" to 0.000"-0.002" to 0.000"3/4"5/8"0.458"1:96ASME B17.1 Class 1Inch98471A2420000
    5"-0.002" to 0.000"-0.002" to 0.000"3/4"5/8"0.453"1:96ASME B17.1 Class 1Inch98471A2430000
    5 1/2"-0.002" to 0.000"-0.002" to 0.000"3/4"5/8"0.448"1:96ASME B17.1 Class 1Inch98471A2440000
    6"-0.002" to 0.000"-0.002" to 0.000"3/4"5/8"0.443"1:96ASME B17.1 Class 1Inch98471A2450000
     

    Tapped Rounded Machine Keys

    Image of Product. Front orientation. Machine Keys. Tapped Rounded Machine Keys.
    Thread a screw through the tapped hole to pop these keys out of a keyway. When installed, they fill oval keyways completely, reducing stress on the key and shaft. Using them in a closed keyway keeps them from sliding along the shaft axis. The rounded ends make it easy to slide gears, hubs, and other components into place. To install, press them in to place. Use them for permanent or high-torque applications, or to replace a key in a worn keyway. Keys are made of steel.
    Oversized Tolerance—Oversized keys create a tight fit. They conform to ASME B17.1 Class 2 standards for dimensions and tolerances.
    Tolerance
    Lg.
    Tolerance
    Rating
    Ht.
    Wd.
    Min.
    Hardness
    Thread
    Size
    Specs. Met
    Each
    1018-1045 Carbon Steel
     
    1/2" × 1/2"
    2"Oversized0.000" to 0.001"0.000" to 0.001"Not Rated1/4"-20
    		ASME B17.1 Class 290164A90100000
     

    Fixture Keys

    Image of ProductInUse. Front orientation. Contains Annotated. Fixture Keys. Fixture Keys.
    Image of Product. Front orientation. Contains Annotated. Fixture Keys. Fixture Keys, Rectangle.

    Rectangle

    Sized to fit with precision in machine table T-slots, use these keys to locate fixtures and vises on your machine table. They mount to the underside of your fixture or vise with a socket head cap screw.
    For Machine
    Table T-Slot Wd.
    Lg.
    Wd.
    Ht.
    Wd. Tolerance
    For Mounting
    Screw Size
    Mounting Fasteners
    Included
    Each
    Rectangle
     
    Steel
    1/2"3/4"1/2"1/2"-0.0005" to 0"1/4"
    		No8961A6500000
     

    Woodruff Keys

    Image of Product. Front orientation. Contains Annotated. Machine Keys. Woodruff Keys.
    Image of Attribute. Side View. Front orientation. Contains Annotated. Woodruff Keys.

    Side View

    Woodruff keys work well near shaft shoulders, where a standard open keyway would create too much stress. They are also often used on tapered shafts. These keys have a rounded shape that makes them easy to remove when parts need to be taken apart frequently, such as for maintenance or prototyping. Because they're usually shorter than standard machine keys, they work best in light duty applications. Use them to connect gears and other components to shafts. Also known as half moon keys.
    1018-1045 Carbon Steel and 8630 Alloy Steel—Steel keys offer good strength.
    Inch—Inch keys conform to ASME B17.2 standards for dimensions and tolerances.
    Tolerance
    Woodruff
    Key No.
    Wd.
    For Keyway
    Dia.
    Ht.
    Lg.
    Wd.
    Ht.
    Specs.
    Met
    System of
    Measurement
    Pkg.
    Qty.
    Pkg.
    1018-1045 Carbon Steel
    V1/2"2 3/4"0.75"2.317"0.000" to 0.001"-0.005" to 0.000"ASME B17.2Inch598481A335000000
    VX1/2"2 3/4"0.594"2"0.000" to 0.001"-0.005" to 0.000"ASME B17.2Inch598481A31000000
     
    8630 Alloy Steel
    V1/2"2 3/4"0.75"2.317"0.000" to 0.001"-0.005" to 0.000"ASME B17.2Inch198525A33500000
    VX1/2"2 3/4"0.594"2"0.000" to 0.001"-0.005" to 0.000"ASME B17.2Inch598525A31000000
     

    Plastic L-Key Organizers

    Image of Product. Front orientation. Hex Key Organizers. Plastic L-Key Organizers, Style A.

    Style A

    These plastic organizers store keys in slots marked with the size.
    Style
    For No.
    of Keys
    For Drive
    Style
    For Key Sizes
    Lg.
    Wd.
    Ht.
    Each
    A7Hex
    		5/64", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4"2"1/2"2"53045A2500000
    A7Torx
    		T10, T15, T20, T25, T27, T30, T402"1/2"2"53045A710000
    back to top