About Files
Files, also known as American-pattern and machinists' files, are used to remove material quickly.
Precision files, also known as Swiss-pattern files, are made to exacting measurements to ensure smoothness and are useful for finishing delicate and intricate parts.
More
About Finishing
More
About Sanding Abrasives
More
Knife Files


Get into tight angles, corners, and slots. These files do not include a handle but do have a tang that fits into a handle. Length does not include the tang.
Double Cut—Surface has two sets of diagonal teeth and is often used with heavier pressure than single cut for rapid material removal.
Single Cut—Surface has one set of diagonal teeth and is often used with light pressure to slowly remove material and sharpen tool-cutting surfaces.
Edge with no teeth protects adjacent surfaces when filing.
Black-oxide finish resists rust and clogging.
Lg. | Wd. | Thick. | Knife Edge Tooth Style | Thick Edge Tooth Style | Finish | For Use On | Each | |
For Coarse Finish | ||||||||
---|---|---|---|---|---|---|---|---|
Double-Cut Faces | ||||||||
4" | 1/2" | 1/8" | Single Cut | None | __ | Steel, Iron | 0000000 | 000000 |
6" | 11/16" | 1/8" | Single Cut | None | __ | Steel, Iron | 0000000 | 00000 |
7 3/4" | 11/16" | 3/16" | Single Cut | None | Black Oxide | Steel, Iron | 00000000 | 00000 |
8" | 13/16" | 3/16" | Single Cut | None | __ | Steel, Iron | 0000000 | 00000 |
10" | 13/16" | 3/16" | Single Cut | None | Black Oxide | Steel, Iron | 00000000 | 00000 |
10" | 1" | 1/4" | Single Cut | None | __ | Steel, Iron | 0000000 | 00000 |
12" | 1 1/4" | 1/4" | Single Cut | None | __ | Steel, Iron | 0000000 | 00000 |
For Medium Finish | ||||||||
Double-Cut Faces | ||||||||
4" | 1/2" | 1/8" | Single Cut | None | __ | Steel, Iron | 0000000 | 00000 |
6" | 11/16" | 1/8" | Single Cut | None | __ | Steel, Iron | 0000000 | 00000 |
8" | 13/16" | 3/16" | Single Cut | None | __ | Steel, Iron | 0000000 | 00000 |
10" | 1" | 1/4" | Single Cut | None | __ | Steel, Iron | 0000000 | 00000 |
For Fine Finish | ||||||||
Double-Cut Faces | ||||||||
4" | 1/2" | 1/8" | Single Cut | None | __ | Steel, Iron | 0000000 | 00000 |
6" | 11/16" | 1/8" | Single Cut | None | __ | Steel, Iron | 0000000 | 00000 |
8" | 13/16" | 3/16" | Single Cut | None | __ | Steel, Iron | 0000000 | 00000 |
10" | 1" | 1/4" | Single Cut | None | __ | Steel, Iron | 0000000 | 00000 |
File Sets
Keep multiple files on hand for workpieces of different shapes and sizes.
All sets include American-pattern files, also known as machinists' files.
Double Cut—Surface has two sets of diagonal teeth and is often used with heavier pressure than single cut for rapid material removal.
Files with wood handles have a durable grip that's shaped to fit comfortably in your hand.
Don't see the set you need? Create your own with a tool roll and individual files.
![]() | ![]() Rectangular | ![]() Knife | ![]() Half Round |
![]() Round | ![]() Square |
Lg. | Wd. | Face Tooth Style | Cut Pattern | Handle Material | Container Type | For Use On | Each | |
Rectangular, Half Round, Round, Square, and Knife—For Coarse and Medium Finish | ||||||||
---|---|---|---|---|---|---|---|---|
6", 10" | 3/8", 5/8", 15/16", 1" | Double Cut | American | Wood | Canvas Roll-Up Pouch | Steel, Iron | 00000000 | 0000000 |
Precision File Sets
![]() 6-Piece Set | ![]() Rectangular with Double-Cut Faces | ![]() Tapered Half Round with Double-Cut Faces | ![]() Tapered Round with Double-Cut Face |
![]() Half Round | ![]() Rectangular | ![]() Thin-Tapered Rectangular with Double-Cut Faces | |
![]() Triangular with Double-Cut Faces | ![]() Knife with Double-Cut Faces | ![]() Knife |
Made to exacting measurements, the files in these sets give you precise control over how much material you remove. Also known as Swiss-pattern files, they create more consistent finishes than American-pattern files. Use them for smoothing intricate parts and other applications where accuracy is key. All files are double cut, which means their surface has two sets of diagonal teeth. They remove material more quickly than single cut files, but you’ll need to use heavier pressure.
Finish No. | Includes | Container Type | For Use On | Each | |
6-Piece Sets | |||||
---|---|---|---|---|---|
0 | One Medium-Finish Rectangular File with Double-Cut Faces—6" Lg. One Medium-Finish Thin-Tapered Rectangular File with Double-Cut Faces—6" Lg. One Medium-Finish Tapered Half-Round File with Double-Cut Faces—6" Lg. One Medium-Finish Tapered Round File with Double-Cut Face—6" Lg. One Medium-Finish Triangular File with Double-Cut Faces—6" Lg. One Medium-Finish Knife File with Double-Cut Faces—6" Lg. | Plastic Pouch | Steel, Iron | 00000000 | 0000000 |
2 | One Fine-Finish Rectangular File with Double-Cut Faces—6" Lg. One Fine-Finish Thin-Tapered Rectangular File with Double-Cut Faces—6" Lg. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—6" Lg. One Fine-Finish Tapered Round File with Double-Cut Face—6" Lg. One Fine-Finish Triangular File with Double-Cut Faces—6" Lg. One Fine-Finish Knife File with Double-Cut Faces—6" Lg. | Plastic Pouch | Steel, Iron | 00000000 | 000000 |
4 | One Extra Fine-Finish Rectangular File with Double-Cut Faces—6" Lg. One Extra Fine-Finish Thin-Tapered Rectangular File with Double-Cut Faces—6" Lg. One Extra Fine-Finish Tapered Half-Round File with Double-Cut Faces—6" Lg. One Extra Fine-Finish Tapered Round File with Double-Cut Face—6" Lg. One Extra Fine-Finish Triangular File with Double-Cut Faces—6" Lg. One Extra Fine-Finish Knife File with Double-Cut Faces—6" Lg. | Plastic Pouch | Steel, Iron | 00000000 | 000000 |
Needle Files


The small tip allows precise work in tight spots. These files do not include a handle but do have a tang that fits into a handle. Length does not include the tang.
Knife files get into tight angles, corners, and slots.
Double Cut—Surface has two sets of diagonal teeth and is often used with heavier pressure than single cut for rapid material removal.
Single Cut—Surface has one set of diagonal teeth and is often used with light pressure to slowly remove material and sharpen tool-cutting surfaces.
For Medium Finish (No. 0) | For Extra Fine Finish (No. 4) | ||||||||
---|---|---|---|---|---|---|---|---|---|
Lg. | Wd. | Thick. | Face Tooth Style | Edge Tooth Style | For Use On | Each | Each | ||
Tapered Knife | |||||||||
3" | 0.213" | 0.059" | Double Cut × Double Cut | Single Cut (Knife Edge) × None (Thick Edge) | Steel, Iron | 000000 | 00 | 0000000 | 000000 |
3 1/4" | 0.213" | 0.059" | Double Cut × Double Cut | Single Cut (Knife Edge) × None (Thick Edge) | Steel, Iron | 0000000 | 000000 | 000000 | 00 |
Economy Needle File Sets
![]() 12-Piece Set | ![]() Rectangular | ![]() Tapered Half Round | |
![]() Tapered Rectangular | ![]() Tapered Round | ||
![]() Tapered Square | ![]() Tapered Triangular | ![]() Joint | ![]() Slitting |
![]() Tapered Barrette | ![]() Tapered Crossing | ![]() Tapered Knife | ![]() Tapered Marking |
These files are for infrequent use. The small tips allow precise work in tight spots. These files do not include a handle but do have a tang that fits into a handle. Length includes the tang.
Finish No. | Includes | For Use On | Each | |
0 | One Medium-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick. One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.182" Wd. × 0.047" Thick. One Medium-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick. One Medium-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia. One Medium-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd. One Medium-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd. One Medium-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg. × 0.202" Wd. × 0.067" Thick. One Medium-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.193" Wd. × 0.067" Thick. One Medium-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.187" Wd. × 0.067" Thick. One Medium-Finish Joint File with Plain Faces and Double-Cut Edges—5 1/2" Lg. × 0.191" Wd. × 0.050" Thick. One Medium-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.215" Wd. × 0.073" Thick. One Medium-Finish Tapered Marking File with Double-Cut Faces—5 1/2" Lg. × 0.184" Wd. × 0.055" Thick. | Steel, Iron | 0000000 | 000000 |
2 | One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick. One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.182" Wd. × 0.047" Thick. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick. One Fine-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia. One Fine-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd. One Fine-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd. One Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg.×0.202" Wd.×0.067" Thick. One Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.193" Wd. × 0.067" Thick. One Fine-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.187" Wd. × 0.067" Thick. One Fine-Finish Joint File with Plain Faces and Double-Cut Edges—5 1/2" Lg. × 0.191" Wd. × 0.050" Thick. One Fine-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.215" Wd. × 0.073" Thick. One Fine-Finish Tapered Marking File with Double-Cut Faces—5 1/2" Lg. × 0.184" Wd. × 0.055" Thick. | Steel, Iron | 0000000 | 00000 |
4 | One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.182" Wd. × 0.047" Thick One Extra-Fine-Finish Joint File with Plain Faces and Double-Cut Edges—5 1/2" Lg. × 0.191" Wd. × 0.050" Thick. One Extra-Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick. One Extra-Fine-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.215" Wd. × 0.073" Thick. One Extra-Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.193" Wd. × 0.067" Thick. One Extra-Fine-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.187" Wd. × 0.067" Thick. One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick. One Extra-Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg.×0.202" Wd.×0.067" Thick One Extra-Fine-Finish Tapered Marking File with Double-Cut Faces—5 1/2" Lg. × 0.184" Wd. × 0.055" Thick. One Extra-Fine-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia. One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd. One Extra-Fine-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd. | Steel, Iron | 0000000 | 00000 |
Finish No. | Includes | For Use On | Each | |
0 | One Medium-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick. One Medium-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Medium-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Medium-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Medium-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd. One Medium-Finish Tapered Knife File with Double-Cut Faces, One Single-Cut Edge, and One Plain Edge—6 1/4" Lg. × 0.213" Wd. × 0.059" Thick. One Medium-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.201" Wd. × 0.071" Thick. One Medium-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.201" Wd. × 0.079" Thick. One Medium-Finish Joint File with Plain Faces and Double-Cut Edges—6 1/4" Lg. × 0.209" Wd. × 0.051" Thick. One Medium-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.236" Wd. × 0.086" Thick. One Medium-Finish Tapered Marking File with Double-Cut Faces—6 1/4" Lg. × 0.209" Wd. × 0.071" Thick. | Steel, Iron | 0000000 | 000000 |
2 | One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Fine-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd. One Fine-Finish Tapered Knife File with Double-Cut Faces, One Single-Cut Edge, and One Plain Edge—6 1/4" Lg. × 0.213" Wd. × 0.059" Thick. One Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.201" Wd. × 0.071" Thick. One Fine-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.201" Wd. × 0.079" Thick. One Fine-Finish Joint File with Plain Faces and Double-Cut Edges—6 1/4" Lg. × 0.209" Wd. × 0.051" Thick. One Fine-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.236" Wd. × 0.086" Thick. One Fine-Finish Tapered Marking File with Double-Cut Faces—6 1/4" Lg. × 0.209" Wd. × 0.071" Thick. | Steel, Iron | 0000000 | 00000 |
4 | One Extra-Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Extra-Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Extra-Fine-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd. One Extra-Fine-Finish Tapered Knife File with Double-Cut Faces, One Single-Cut Edge, and One Plain Edge—6 1/4" Lg. × 0.213" Wd. × 0.059" Thick One Extra-Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.201" Wd. × 0.071" Thick. One Extra-Fine-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.201" Wd. × 0.079" Thick. One Extra-Fine-Finish Joint File with Plain Faces and Double-Cut Edges—6 1/4" Lg. × 0.209" Wd. × 0.051" Thick. One Extra-Fine-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.236" Wd. × 0.086" Thick. One Extra-Fine-Finish Tapered Marking File with Double-Cut Faces—6 1/4" Lg. × 0.209" Wd. × 0.071" Thick. | Steel, Iron | 0000000 | 00000 |
Needle File Sets
The files in these sets have small tips for precise work in tight spots. They stand up to frequent use. All are Swiss pattern, so they’re made to exacting measurements to give you control over how much material you remove. They produce more consistent finishes than American-pattern files. File length does not include the length of the tang or handle.
Files without handles have a tang, so you can choose your own handle. Files with rubber-coated plastic handles are cushioned and comfortable to hold. Each handle has a hole so you can hang the file.
All sets include double-cut files, which have two sets of diagonal teeth. They remove material more quickly than single-cut files, but you’ll need to use heavier pressure. Some sets also include single-cut files, which are often used with light pressure to slowly remove material and sharpen tool-cutting surfaces.
![]() 12-Piece Set | ![]() Joint | ![]() Rectangular | |
![]() Slitting | ![]() Tapered Barrette | ||
![]() Tapered Crossing | ![]() Tapered Half Round | ![]() Tapered Knife | ![]() Tapered Marking |
![]() Tapered Rectangular | ![]() Tapered Round | ![]() Tapered Square | ![]() Tapered Triangular |
Finish No. | Includes | Container Type | For Use On | Each | |
12-Piece Sets—4" Lg. | |||||
---|---|---|---|---|---|
0 | One Medium-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—4" Lg. × 0.129" Wd. × 0.028" Thick. One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—4" Lg. × 0.135" Wd. × 0.039" Thick. One Medium-Finish Tapered Half-Round File with Double-Cut Faces—4" Lg. × 0.149" Wd. × 0.053" Thick. One Medium-Finish Tapered Round File with Double-Cut Face—4" Lg. × 0.071" Dia. One Medium-Finish Tapered Triangular File with Double-Cut Faces—4" Lg. × 0.108" Wd. One Medium-Finish Tapered Square File with Double-Cut Faces—4" Lg. × 0.069" Wd. One Medium-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—4" Lg. × 0.148" Wd. × 0.052" Thick. One Medium-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—4" Lg. × 0.155" Wd. × 0.053" Thick. One Medium-Finish Tapered Crossing File with Double-Cut Faces—4" Lg. × 0.133" Wd. × 0.053" Thick. One Medium-Finish Joint File with Plain Faces and Double-Cut Edges—4" Lg. × 0.153" Wd. × 0.040" Thick. One Medium-Finish Slitting File with Double-Cut Faces—4" Lg. × 0.182" Wd. × 0.059" Thick. One Medium-Finish Tapered Marking File with Double-Cut Faces—4" Lg. × 0.140" Wd. × 0.044" Thick. | Plastic Pouch | Steel, Iron | 0000000 | 0000000 |
2 | One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—4" Lg. × 0.129" Wd. × 0.028" Thick. One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—4" Lg. × 0.135" Wd. × 0.039" Thick. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—4" Lg. × 0.149" Wd. × 0.053" Thick. One Fine-Finish Tapered Round File with Double-Cut Face—4" Lg. × 0.071" Dia. One Fine-Finish Tapered Triangular File with Double-Cut Faces—4" Lg. × 0.108" Wd. One Fine-Finish Tapered Square File with Double-Cut Faces—4" Lg. × 0.069" Wd. One Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—4" Lg.×0.148" Wd.×0.052" Thick. One Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—4" Lg. × 0.155" Wd. × 0.053" Thick. One Fine-Finish Tapered Crossing File with Double-Cut Faces—4" Lg. × 0.133" Wd. × 0.053" Thick. One Fine-Finish Joint File with Plain Faces and Double-Cut Edges—4" Lg. × 0.153" Wd. × 0.040" Thick. One Fine-Finish Slitting File with Double-Cut Faces—4" Lg. × 0.182" Wd. × 0.059" Thick. One Fine-Finish Tapered Marking File with Double-Cut Faces—4" Lg. × 0.140" Wd. × 0.044" Thick. | Plastic Pouch | Steel, Iron | 0000000 | 000000 |
12-Piece Sets—5 1/2" Lg. | |||||
0 | One Medium-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick. One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.182" Wd. × 0.047" Thick. One Medium-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick. One Medium-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia. One Medium-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd. One Medium-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd. One Medium-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg. × 0.202" Wd. × 0.067" Thick. One Medium-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.193" Wd. × 0.067" Thick. One Medium-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.187" Wd. × 0.067" Thick. One Medium-Finish Joint File with Plain Faces and Double-Cut Edges—5 1/2" Lg. × 0.191" Wd. × 0.050" Thick. One Medium-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.215" Wd. × 0.073" Thick. One Medium-Finish Tapered Marking File with Double-Cut Faces—5 1/2" Lg. × 0.184" Wd. × 0.055" Thick. | Plastic Pouch | Steel, Iron | 0000000 | 000000 |
2 | One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick. One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.182" Wd. × 0.047" Thick. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick. One Fine-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia. One Fine-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd. One Fine-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd. One Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg.×0.202" Wd.×0.067" Thick. One Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.193" Wd. × 0.067" Thick. One Fine-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.187" Wd. × 0.067" Thick. One Fine-Finish Joint File with Plain Faces and Double-Cut Edges—5 1/2" Lg. × 0.191" Wd. × 0.050" Thick. One Fine-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.215" Wd. × 0.073" Thick. One Fine-Finish Tapered Marking File with Double-Cut Faces—5 1/2" Lg. × 0.184" Wd. × 0.055" Thick. | Plastic Pouch | Steel, Iron | 0000000 | 000000 |
4 | One Extra-Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick. One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick. One Extra-Fine-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia. One Extra-Fine-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd. One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd. One Extra-Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg.×0.202" Wd.×0.067" Thick One Extra-Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.193" Wd. × 0.067" Thick. One Extra-Fine-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.187" Wd. × 0.067" Thick. One Extra-Fine-Finish Joint File with Plain Faces and Double-Cut Edges—5 1/2" Lg. × 0.191" Wd. × 0.050" Thick. One Extra-Fine-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.215" Wd. × 0.073" Thick. One Extra-Fine-Finish Tapered Marking File with Double-Cut Faces—5 1/2" Lg. × 0.184" Wd. × 0.055" Thick. | Plastic Pouch | Steel, Iron | 0000000 | 000000 |
12-Piece Sets—6 1/4" Lg. | |||||
0 | One Medium-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick. One Medium-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Medium-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Medium-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Medium-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd. One Medium-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—6 1/4" Lg. × 0.213" Wd. × 0.059" Thick One Medium-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.201" Wd. × 0.071" Thick. One Medium-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.201" Wd. × 0.079" Thick. One Medium-Finish Joint File with Plain Faces and Double-Cut Edges—6 1/4" Lg. × 0.209" Wd. × 0.051" Thick. One Medium-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.236" Wd. × 0.086" Thick. One Medium-Finish Tapered Marking File with Double-Cut Faces—6 1/4" Lg. × 0.209" Wd. × 0.071" Thick. | Plastic Pouch | Steel, Iron | 0000000 | 000000 |
2 | One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Fine-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd. One Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—6 1/4" Lg. × 0.213" Wd. × 0.059" Thick. One Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.201" Wd. × 0.071" Thick. One Fine-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.201" Wd. × 0.079" Thick. One Fine-Finish Joint File with Plain Faces and Double-Cut Edges—6 1/4" Lg. × 0.209" Wd. × 0.051" Thick. One Fine-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.236" Wd. × 0.086" Thick. One Fine-Finish Tapered Marking File with Double-Cut Faces—6 1/4" Lg. × 0.209" Wd. × 0.071" Thick. | Plastic Pouch | Steel, Iron | 0000000 | 000000 |
4 | One Extra-Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Extra-Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Extra-Fine-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd. One Extra-Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—6 1/4" Lg.×0.213" Wd.×0.059" Thick One Extra-Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.201" Wd. × 0.071" Thick. One Extra-Fine-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.201" Wd. × 0.079" Thick. One Extra-Fine-Finish Joint File with Plain Faces and Double-Cut Edges—6 1/4" Lg. × 0.209" Wd. × 0.051" Thick. One Extra-Fine-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.236" Wd. × 0.086" Thick. One Extra-Fine-Finish Tapered Marking File with Double-Cut Faces—6 1/4" Lg. × 0.209" Wd. × 0.071" Thick. | Plastic Pouch | Steel, Iron | 0000000 | 000000 |
6 | One Extra-Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Extra-Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Extra-Fine-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd. One Extra-Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—6 1/4" Lg.×0.213" Wd.×0.059" Thick One Extra-Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.201" Wd. × 0.071" Thick. One Extra-Fine-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.201" Wd. × 0.079" Thick. One Extra-Fine-Finish Joint File with Plain Faces and Double-Cut Edges—6 1/4" Lg. × 0.209" Wd. × 0.051" Thick. One Extra-Fine-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.236" Wd. × 0.086" Thick. One Extra-Fine-Finish Tapered Marking File with Double-Cut Faces—6 1/4" Lg. × 0.209" Wd. × 0.071" Thick. | Plastic Pouch | Steel, Iron | 0000000 | 000000 |














Finish No. | Includes | Container Type | For Use On | Each | |
6-Piece Sets—5 1/2" Lg. | |||||
---|---|---|---|---|---|
2 | One Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.21" Wd. × 0.075" Thick. One Fine-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.11" Wd. One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.21" Wd. × 0.058" Thick. One Fine-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.117" Dia. One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.21" Wd. × 0.06" Thick. One Fine-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.15" Wd. | Plastic Case | Steel, Iron | 0000000 | 000000 |
12-Piece Sets—5 1/2" Lg. | |||||
0 | One Medium-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.12" Wd. One Medium-Finish Tapered Marking File with Plain Face and Single-Cut Face—5 1/2" Lg. × 0.193" Wd. × 0.073" Thick. One Medium-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.21" Wd. × 0.087" Thick. One Medium-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.21" Wd. × 0.09" Thick. One Medium-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.17" Wd. × 0.095" Thick. One Medium-Finish Joint File with Plain Faces and Single-Cut Edges—5 1/2" Lg. × 0.236" Wd. × 0.049" Thick. One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.25" Wd. × 0.054" Thick. One Medium-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.23" Wd. × 0.055" Thick. One Medium-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.1" Wd. One Medium-Finish Tapered Round File with Single Face—5 1/2" Lg. × 0.124" Dia. One Medium-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg. × 0.197" Wd. × 0.078" Thick | Zippered Pouch | Steel, Iron | 0000000 | 000000 |
2 | One Fine-Finish Tapered Round File with Single Face—5 1/2" Lg. × 0.124" Dia. One Fine-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.17" Wd. × 0.095" Thick. One Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.21" Wd. × 0.087" Thick. One Fine-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.12" Wd. One Fine-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.21" Wd. × 0.09" Thick. One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.25" Wd. × 0.054" Thick. One Fine-Finish Tapered Marking File with Plain Face and Single-Cut Face—5 1/2" Lg. × 0.193" Wd. × 0.073" Thick. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.195" Wd. × 0.078" Thick. One Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg. × 0.197" Wd. × 0.078" Thick. One Fine-Finish Joint File with Plain Faces and Single-Cut Edges—5 1/2" Lg. × 0.236" Wd. × 0.049" Thick. One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.23" Wd. × 0.055" Thick. One Fine-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.1" Wd. | Zippered Pouch | Steel, Iron | 0000000 | 000000 |
4 | One Extra-Fine-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.21" Wd. × 0.09" Thick. One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.195" Wd. × 0.078" Thick. One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.25" Wd. × 0.054" Thick. One Extra-Fine-Finish Tapered Marking File with Plain Face and Single-Cut Face—5 1/2" Lg. × 0.193" Wd. × 0.073" Thick. One Extra-Fine-Finish Joint File with Plain Faces and Single-Cut Edges—5 1/2" Lg. × 0.236" Wd. × 0.049" Thick. One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.1" Wd. One Extra-Fine-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.12" Wd. One Extra-Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg. × 0.197" Wd. × 0.078" T One Extra-Fine-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.17" Wd. × 0.095" Thick. One Extra-Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.23" Wd. × 0.055" Thick. One Extra-Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.21" Wd. × 0.087" Thick. One Extra-Fine-Finish Tapered Round File with Single Face—5 1/2" Lg. × 0.124" Dia. | Zippered Pouch | Steel, Iron | 0000000 | 000000 |
12-Piece Sets—6 1/4" Lg. | |||||
0 | One Medium-Finish Rectangular File with Double-Cut Faces—6 1/4" Lg. × 0.23" Wd. × 0.05" Thick. One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.27" Wd. × 0.042" Thick. One Medium-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.197" Wd. × 0.07" Thick. One Medium-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.12" Dia. One Medium-Finish Tapered Triangular File with Single-Cut Faces—6 1/4" Lg. × 0.13" Wd. One Medium-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.098" Wd. One Medium-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—6 1/4" Lg. × 0.2" Wd. × 0.073" Thick. One Medium-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.21" Wd. × 0.09" Thick. One Medium-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.19" Wd. × 0.09" Thick. One Medium-Finish Joint File with Plain Faces and Single-Cut Edges—6 1/4" Lg. × 0.23" Wd. × 0.05" Thick. One Medium-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.21" Wd. × 0.09" Thick. One Medium-Finish Tapered Marking File with Plain Face and Single-Cut Face—6 1/4" Lg. × 0.198" Wd. × 0.073" Thick. | Zippered Pouch | Steel, Iron | 00000000 | 000000 |
2 | One Fine-Finish Tapered Triangular File with Single-Cut Faces—6 1/4" Lg. × 0.13" Wd. One Fine-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.19" Wd. × 0.09" Thick. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.197" Wd. × 0.07" Thick. One Fine-Finish Tapered Marking File with Plain Face and Single-Cut Face—6 1/4" Lg. × 0.198" Wd. × 0.073" Thick. One Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.21" Wd. × 0.09" Thick. One Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.12" Dia. One Fine-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.21" Wd. × 0.09" Thick. One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.27" Wd. × 0.042" Thick. One Fine-Finish Rectangular File with Double-Cut Faces—6 1/4" Lg. × 0.23" Wd. × 0.05" Thick. One Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—6 1/4" Lg. × 0.2" Wd. × 0.073" Thick. One Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.098" Wd. One Fine-Finish Joint File with Plain Faces and Single-Cut Edges—6 1/4" Lg. × 0.23" Wd. × 0.05" Thick. | Zippered Pouch | Steel, Iron | 00000000 | 000000 |
4 | One Extra-Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—6 1/4" Lg. × 0.2" Wd. × 0.073" Thi One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.098" Wd. One Extra-Fine-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.19" Wd. × 0.09" Thick. One Extra-Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.21" Wd. × 0.09" Thick. One Extra-Fine-Finish Joint File with Plain Faces and Single-Cut Edges—6 1/4" Lg. × 0.23" Wd. × 0.05" Thick. One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.197" Wd. × 0.07" Thick. One Extra-Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.12" Dia. One Extra-Fine-Finish Tapered Marking File with Plain Face and Single-Cut Face—6 1/4" Lg. × 0.198" Wd. × 0.073" Thick. One Extra-Fine-Finish Rectangular File with Double-Cut Faces—6 1/4" Lg. × 0.23" Wd. × 0.05" Thick. One Extra-Fine-Finish Tapered Triangular File with Single-Cut Faces—6 1/4" Lg. × 0.13" Wd. One Extra-Fine-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.21" Wd. × 0.09" Thick. One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.27" Wd. × 0.042" Thick. | Zippered Pouch | Steel, Iron | 00000000 | 000000 |
Carbide Needle File Sets
Second only to diamond in hardness, these files last 100 times longer than standard files. The small tips allow precise work in tight spots.
![]() | ![]() Knife | ![]() Rectangular | ![]() Round |
![]() Square | ![]() Triangular |
Includes | For Use On | Each | |
One Extra-Fine-Finish (280 Grit) Rectangular File—5 1/2" Lg. × 0.236" Wd. × 0.083" Thick. One Extra-Fine-Finish (280 Grit) Tapered Round File—5 1/2" Lg. × 0.128" Dia. One Extra-Fine-Finish (280 Grit) Tapered Triangular File—5 1/2" Lg. × 0.167" Wd. One Extra-Fine-Finish (280 Grit) Tapered Square File—5 1/2" Lg. × 0.128" Wd. One Extra-Fine-Finish (280 Grit) Tapered Knife File—5 1/2" Lg. × 0.207" Wd. × 0.089" Thick. One Plastic Handle | Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbon Fiber, Graphite, Brick | 0000000 | 000000 |
![]() | ![]() Knife | ![]() Rectangular | ![]() Round |
![]() Square | ![]() Triangular |
Includes | For Use On | Each | |
One Extra-Fine-Finish (280 Grit) Rectangular File—7 1/8" Lg. × 0.394" Wd. × 0.108" Thick. One Extra-Fine-Finish (280 Grit) Tapered Round File—7 1/8" Lg. × 0.217" Dia. One Extra-Fine-Finish (280 Grit) Tapered Triangular File—7 1/8" Lg. × 0.276" Wd. One Extra-Fine-Finish (280 Grit) Tapered Square File—7 1/8" Lg. × 0.197" Wd. One Extra-Fine-Finish (280 Grit) Tapered Knife File—7 1/8" Lg. × 0.354" Wd. × 0.128" Thick. One Plastic Handle | Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbon Fiber, Graphite, Brick | 0000000 | 000000 |
Carbide Needle Files


Second only to diamond in hardness, these files last 100 times longer than standard files. The small tip allows precise work in tight spots.
Knife files get into tight angles, corners, and slots.
For Extra Fine Finish (280 Grit) | |||||
---|---|---|---|---|---|
Lg. | Wd. | Thick. | For Use On | Each | |
Knife | |||||
5 1/2" | 0.207" | 0.089" | Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbon Fiber, Graphite, Brick | 0000000 | 000000 |
7 1/8" | 0.354" | 0.128" | Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbon Fiber, Graphite, Brick | 0000000 | 00000 |
Diamond Needle Files


The hardest files available, these are the longest lasting and strong enough to file hard materials. The small tip allows precise work in tight spots.
Knife files get into tight angles, corners, and slots.
For Coarse Finish (80-100 Grit) | For Medium Finish (120-150 Grit) | For Fine Finish (150-180 Grit) | ||||||||
---|---|---|---|---|---|---|---|---|---|---|
Diamond Surface Lg. | Lg. | Wd. | Thick. | For Use On | Each | Each | Each | |||
Tapered Knife | ||||||||||
2.75" | 5 1/2" | 0.213" | 0.063" | Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Brick | 0000000 | 000000 | 0000000 | 000000 | 000000 | 000000 |
Push-On File Handles




Push one of these handles onto a file tang. They’re shaped to fit comfortably in your hand.
Style C handles have ridges for a secure grip even when your hands are greasy or wet.
Style D handles keep your round files from rolling away. They have beveled edges and a comfortable grip.
For File Tang | ||||||||
---|---|---|---|---|---|---|---|---|
Style | For File Lg. | Dia. | Wd. | Lg. | Material | Ferrule Material | Each | |
A | 3"-6" | 7/64"-1/8" | __ | 4" | Wood | Steel | 000000 | 00000 |
A | 6"-8" | 5/32"-11/64" | __ | 4 1/2" | Wood | Steel | 000000 | 0000 |
A | 8"-12" | 15/64"-1/4" | __ | 5" | Wood | Steel | 000000 | 0000 |
A | 12"-16" | 19/64"-5/16" | __ | 5 1/2" | Wood | Steel | 000000 | 0000 |
A | 16"-20" | 21/64"-11/32" | __ | 6" | Wood | Steel | 000000 | 0000 |
B | 3"-4" | 7/64"-1/8" | __ | 3 1/2" | Wood | Steel | 0000000 | 0000 |
B | 4"-6" | 11/64"-3/16" | __ | 4" | Wood | Steel | 0000000 | 0000 |
B | 6"-8" | 13/64"-7/32" | __ | 4 1/4" | Wood | Steel | 0000000 | 0000 |
B | 8"-10" | 17/64"-9/32" | __ | 4 3/4" | Wood | Steel | 0000000 | 0000 |
B | 10"-14" | 23/64"-3/8" | __ | 5" | Wood | Steel | 0000000 | 0000 |
C | 4"-6" | __ | 11/64"-1/4" | 3 1/2" | Plastic | __ | 00000000 | 0000 |
C | 8"-10" | __ | 15/64"-19/64" | 4 1/2" | Plastic | __ | 00000000 | 0000 |
C | 12"-14" | __ | 15/64"-5/16" | 4 1/2" | Plastic | __ | 00000000 | 0000 |
D | 4"-6" | __ | 13/64"-7/32" | 4 1/4" | Plastic | __ | 00000000 | 0000 |
D | 8"-10" | __ | 7/32"-17/64" | 4 1/2" | Plastic | __ | 00000000 | 0000 |
D | 12"-14" | __ | 15/64"-13/32" | 4 1/2" | Plastic | __ | 00000000 | 0000 |
Push-On File Handles with Changeable Inserts



Change the insert to accommodate different files.
Style A and B handles give you good leverage to apply heavy pressure. Style B handles are rubber coated for a cushioned grip.
Style C handles are good for precision work on intricate parts. They fit in the palm of your hand like a ball to improve control.
Twist-On File Handles


A steel insert cuts into file tangs for a secure hold.
For File Lg. | For File Tang Dia. | Lg. | Material | Ferrule Material | Each | |
4" | 1/16"-7/64" | 3 1/2" | Wood | Steel | 000000 | 00000 |
5" | 1/8"-5/32" | 4" | Wood | Steel | 000000 | 0000 |
6" | 11/64"-7/32" | 4" | Wood | Steel | 000000 | 0000 |
8" | 15/64"-17/64" | 4 1/2" | Wood | Steel | 000000 | 0000 |
10" | 9/32"-11/32" | 4 1/2" | Wood | Steel | 000000 | 0000 |
12" | 21/64"-3/8" | 5" | Wood | Steel | 000000 | 0000 |
14" | 13/32"-29/64" | 5" | Wood | Steel | 000000 | 0000 |
4"-6" | 11/64"-7/32" | 3 3/4" | Plastic | __ | 00000000 | 0000 |
6"-10" | 13/64"-1/4" | 4 1/8" | Plastic | __ | 00000000 | 0000 |
8"-12" | 5/16"-23/64" | 4 1/8" | Plastic | __ | 00000000 | 0000 |
10"-14" | 25/64"-7/16" | 4 3/4" | Plastic | __ | 00000000 | 0000 |
12"-16" | 7/16"-31/64" | 5" | Plastic | __ | 00000000 | 0000 |
Two-Hand File Holders for Flexible Scratch-Free Files

Improve control and comfort when you file. These holders are compatible with flexible scratch-free files.
File Mounting Style | For File Lg. | Lg. | Material | Each | |
Fastener | 12"-14" | 14" | Steel | 0000000 | 000000 |
Jaw-Grip File Handles
Smoothing and Polishing Stones
Maintain tools, molds, and dies. These stones can be used by hand or in power tools with a compatible holder. Choose the shape that best matches the contour of your work surface.
Aluminum–oxide stones abrade slowly to create a consistent surface. Also known as India stones.
Novaculite stones have extremely fine grains that cut very slowly for the most control over finishing. Also known as Arkansas stones. Grit is approximate. We recommend using a water-soluble or oil-based lubricant.

Grit (For Finish) | Lg. | Wd. | Thick. | Color | Lubrication | Each | |
Aluminum Oxide—For Use On Steel | |||||||
---|---|---|---|---|---|---|---|
100 (Smooth) | 4" | 1" | 1/16"-1/8" | Brown | Oil Filled | 0000000 | 000000 |
240 (Extra Smooth) | 4" | 1" | 1/16"-1/8" | Brown | Oil Filled | 0000000 | 00000 |
320 (Extra Smooth) | 4" | 1" | 1/16"-1/8" | Orange | Oil Filled | 0000000 | 00000 |
Novaculite—For Use On Steel | |||||||
800 (Polished) | 3" | 1" | 1/8"-1/4" | Gray | Recommended | 0000000 | 00000 |
Smoothing and Polishing Stone Sets





Maintain tools, molds, and dies. These stones can be used by hand or in power tools with a compatible holder. Choose the shape that best matches the contour of your work surface. We recommend using a water-soluble or oil-based lubricant.
Novaculite stones have extremely fine grains that cut very slowly for the most control over finishing. Also known as Arkansas stones. Grit is approximate.
No. of Pieces | Lg. | Includes | Stone Style | Grit (For Finish) | Color | Container Type | Each | |
Novaculite—For Use On Steel | ||||||||
---|---|---|---|---|---|---|---|---|
4 | 4" | One Square Stone—1/4" Wd. × 1/4" Thick. One Triangular Stone—1/4" Wd. One Round Stone—1/4" Dia. One Knife Stone—29/32" Wd. × 1/8"-1/4" Thick. | Straight | 1000 (Polished) | Off-White | Box | 0000000 | 000000 |
4 | 6" | One Square Stone—3/8" Wd. × 3/8" Thick. One Triangular Stone—3/8" Wd. One Round Stone—3/8" Dia. One Knife Stone—29/32" Wd. × 1/8"-3/8" Thick. | Straight | 1000 (Polished) | Off-White | Box | 0000000 | 000000 |