McMaster-Carr logo
    Filter by
    File Cut Number
    Number of Pieces
    File Pattern
    Face Tooth Style
    Handle Material
    Edge Tooth Style
    U.S.–Mexico–Canada Agreement (USMCA) Qualifying
    DFARS Specialty Metals
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    96 Products
    About Files
    industrial info icon

    Choose files by texture—coarse for quick and heavy removal of material, extra fine for precision and a smooth finish.

    Knife Files

    Image of Product. Front orientation. Files. Knife Files.
    Get into tight angles, corners, and slots. These files do not include a handle but do have a tang that fits into a handle. Length does not include the tang.
    Tapered Knife
    Image of Specification. Front orientation. ZoomedIn view. Knife. Knife Files, Tapered File.

    Tapered Knife

    Double Cut—Surface has two sets of diagonal teeth and is often used with heavier pressure than single cut for rapid material removal.
    Single-Cut Edge—Surface has one set of diagonal teeth and is often used with light pressure to slowly remove material and sharpen tool-cutting surfaces.
    Without Teeth—Edges without teeth protect adjacent surfaces when filing.
    Black Oxide—Black-oxide finish resists rust and clogging.
    For Coarse
    Finish
    For Medium
    Finish
    For Fine Finish
    Lg.
    Wd.
    Thk.
    Edge Tooth Style
    Finish
    For Use On
    Each
    Each
    Each
    Double Cut
     
    Rigid
    4"1/2"1/8"Single Cut Knife Edge × Thick Edge Without Teeth—Steel, Iron4236A110000004236A150000004236A19000000
    6"11/16"1/8"Single Cut Knife Edge × Thick Edge Without Teeth—Steel, Iron4236A12000004236A16000004236A2100000
    7 3/4"11/16"3/16"Single Cut Knife Edge × Thick Edge Without TeethBlack OxideSteel, Iron42605A4900000———0———0
    8"13/16"3/16"Single Cut Knife Edge × Thick Edge Without Teeth—Steel, Iron4236A13000004236A17000004236A2200000
    10"13/16"3/16"Single Cut Knife Edge × Thick Edge Without TeethBlack OxideSteel, Iron42605A5100000———0———0
    10"1"1/4"Single Cut Knife Edge × Thick Edge Without Teeth—Steel, Iron4236A14000004236A18000004236A2300000
    12"1 1/4"1/4"Single Cut Knife Edge × Thick Edge Without Teeth—Steel, Iron4236A2500000———0———0
     

    Needle File Sets

    The files in these sets have small tips for precise work in tight spots. They stand up to frequent use. All are Swiss pattern, so they’re made to exacting measurements to give you control over how much material you remove. They produce more consistent finishes than American-pattern files. File length does not include the length of the tang or handle.
    6 Piece Sets with Rubber-Coated Plastic Handle
    Image of Product. Top orientation. Files. Needle File Sets, 6 Piece Sets with Rubber-Coated Plastic Handle.
    Image of Specification. Straight Rectangle. Front orientation. ZoomedIn view. Rectangle. Needle File Sets, .
    Image of Specification. Tapered Rectangle. Front orientation. ZoomedIn view. Rectangle. Needle File Sets, .

    Straight Rectangle

    Tapered Rectangle

    Image of Specification. Front orientation. ZoomedIn view. Half Round. Needle File Sets, Taper File.
    Image of Specification. Front orientation. ZoomedIn view. Round. Needle File Sets, Taper File.

    Half Round

    Round

    Image of Specification. Front orientation. ZoomedIn view. Triangle. Needle File Sets, Taper File.
    Image of Specification. Front orientation. ZoomedIn view. Square. Needle File Sets, Taper File.

    Triangle

    Square

    Files with rubber-coated plastic handles are cushioned and comfortable to hold. Each handle has a hole so you can hang the file.
    Double-Cut Face—Double-cut files have two sets of diagonal teeth. They remove material more quickly than single-cut files, but you’ll need to use heavier pressure.
    File Cut
    No.
    Includes
    File Shape
    Face Tooth
    Style
    Container
    Type
    For Use On
    Each
    5 1/2" Long
    2One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.21" Wd. × 0.058" Thick.
    One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.21" Wd. × 0.06" Thick.
    One Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.21" Wd. × 0.075" Thick.
    One Fine-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.117" Dia.
    One Fine-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.15" Wd.
    One Fine-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.11" Wd.    		Straight Rectangle
    Tapered Rectangle
    Tapered Half Round
    Tapered Round
    Tapered Triangle
    Tapered Square    		Double CutPlastic CaseSteel, Iron4261A13000000
     
    12 Piece Sets without Handle
    Image of Product. Front orientation. Files. Needle File Sets, 12 Piece Sets without Handle.
    Image of Specification. Straight Rectangle. Front orientation. ZoomedIn view. Rectangle. Needle File Sets, .
    Image of Specification. Tapered Rectangle. Front orientation. ZoomedIn view. Rectangle. Needle File Sets, .
    Image of Specification. Front orientation. ZoomedIn view. Half Round. Needle File Sets, Taper File.
    Image of Specification. Front orientation. ZoomedIn view. Round. Needle File Sets, Taper File.

    Straight Rectangle

    Tapered Rectangle

    Half Round

    Round

    Image of Specification. Front orientation. ZoomedIn view. Triangle. Needle File Sets, Taper File.
    Image of Specification. Front orientation. ZoomedIn view. Square. Needle File Sets, Taper File.
    Image of Specification. Front orientation. ZoomedIn view. Knife. Needle File Sets, Taper File.
    Image of Specification. Front orientation. ZoomedIn view. Barrette. Needle File Sets, Taper File.

    Triangle

    Square

    Knife

    Barrette

    Image of Specification. Front orientation. ZoomedIn view. Crossing. Needle File Sets, Taper File.
    Image of Specification. Front orientation. ZoomedIn view. Joint. Needle File Sets, Straight File.
    Image of Specification. Front orientation. ZoomedIn view. Marking. Needle File Sets, Taper File.
    Image of Specification. Front orientation. ZoomedIn view. Slitting. Needle File Sets, Straight File.

    Crossing

    Joint

    Marking

    Slitting

    Files without handles have a tang, so you can choose your own handle.
    Double-Cut Face—Double-cut files have two sets of diagonal teeth. They remove material more quickly than single-cut files, but you’ll need to use heavier pressure.
    File Cut
    No.
    Includes
    File Shape
    Face Tooth
    Style
    Container
    Type
    For Use On
    Each
    4" Long
    0One Medium-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—4" Lg. × 0.129" Wd. × 0.028" Thick.
    One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—4" Lg. × 0.135" Wd. × 0.039" Thick.
    One Medium-Finish Tapered Half-Round File with Double-Cut Faces—4" Lg. × 0.149" Wd. × 0.053" Thick.
    One Medium-Finish Tapered Round File with Double-Cut Face—4" Lg. × 0.071" Dia.
    One Medium-Finish Tapered Triangular File with Double-Cut Faces—4" Lg. × 0.108" Wd.
    One Medium-Finish Tapered Square File with Double-Cut Faces—4" Lg. × 0.069" Wd.
    One Medium-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—4" Lg. × 0.148" Wd. × 0.052" Thick.
    One Medium-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—4" Lg. × 0.155" Wd. × 0.053" Thick.
    One Medium-Finish Tapered Crossing File with Double-Cut Faces—4" Lg. × 0.133" Wd. × 0.053" Thick.
    One Medium-Finish Joint File with Plain Faces and Double-Cut Edges—4" Lg. × 0.153" Wd. × 0.040" Thick.
    One Medium-Finish Tapered Marking File with Double-Cut Faces—4" Lg. × 0.140" Wd. × 0.044" Thick.
    One Medium-Finish Slitting File with Double-Cut Faces—4" Lg. × 0.182" Wd. × 0.059" Thick.    		Straight Rectangle
    Tapered Rectangle
    Tapered Half Round
    Tapered Round
    Tapered Triangle
    Tapered Square
    Tapered Knife
    Tapered Barrette
    Tapered Crossing
    Straight Joint
    Tapered Marking
    Straight Slitting    		Double CutPlastic PouchSteel, Iron4261A110000000
    2One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—4" Lg. × 0.129" Wd. × 0.028" Thick.
    One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—4" Lg. × 0.135" Wd. × 0.039" Thick.
    One Fine-Finish Tapered Half-Round File with Double-Cut Faces—4" Lg. × 0.149" Wd. × 0.053" Thick.
    One Fine-Finish Tapered Round File with Double-Cut Face—4" Lg. × 0.071" Dia.
    One Fine-Finish Tapered Triangular File with Double-Cut Faces—4" Lg. × 0.108" Wd.
    One Fine-Finish Tapered Square File with Double-Cut Faces—4" Lg. × 0.069" Wd.
    One Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—4" Lg.×0.148" Wd.×0.052" Thick.
    One Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—4" Lg. × 0.155" Wd. × 0.053" Thick.
    One Fine-Finish Tapered Crossing File with Double-Cut Faces—4" Lg. × 0.133" Wd. × 0.053" Thick.
    One Fine-Finish Joint File with Plain Faces and Double-Cut Edges—4" Lg. × 0.153" Wd. × 0.040" Thick.
    One Fine-Finish Tapered Marking File with Double-Cut Faces—4" Lg. × 0.140" Wd. × 0.044" Thick.
    One Fine-Finish Slitting File with Double-Cut Faces—4" Lg. × 0.182" Wd. × 0.059" Thick.    		Straight Rectangle
    Tapered Rectangle
    Tapered Half Round
    Tapered Round
    Tapered Triangle
    Tapered Square
    Tapered Knife
    Tapered Barrette
    Tapered Crossing
    Straight Joint
    Tapered Marking
    Straight Slitting    		Double CutPlastic PouchSteel, Iron4261A12000000
     
    5 1/2" Long
    0One Medium-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick.
    One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.182" Wd. × 0.047" Thick.
    One Medium-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick.
    One Medium-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia.
    One Medium-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd.
    One Medium-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd.
    One Medium-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg. × 0.202" Wd. × 0.067" Thick.
    One Medium-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.193" Wd. × 0.067" Thick.
    One Medium-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.187" Wd. × 0.067" Thick.
    One Medium-Finish Joint File with Plain Faces and Double-Cut Edges—5 1/2" Lg. × 0.191" Wd. × 0.050" Thick.
    One Medium-Finish Tapered Marking File with Double-Cut Faces—5 1/2" Lg. × 0.184" Wd. × 0.055" Thick.
    One Medium-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.215" Wd. × 0.073" Thick.    		Straight Rectangle
    Tapered Rectangle
    Tapered Half Round
    Tapered Round
    Tapered Triangle
    Tapered Square
    Tapered Knife
    Tapered Barrette
    Tapered Crossing
    Straight Joint
    Tapered Marking
    Straight Slitting    		Double CutPlastic PouchSteel, Iron4261A16000000
    2One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick.
    One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.182" Wd. × 0.047" Thick.
    One Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick.
    One Fine-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia.
    One Fine-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd.
    One Fine-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd.
    One Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg.×0.202" Wd.×0.067" Thick.
    One Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.193" Wd. × 0.067" Thick.
    One Fine-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.187" Wd. × 0.067" Thick.
    One Fine-Finish Joint File with Plain Faces and Double-Cut Edges—5 1/2" Lg. × 0.191" Wd. × 0.050" Thick.
    One Fine-Finish Tapered Marking File with Double-Cut Faces—5 1/2" Lg. × 0.184" Wd. × 0.055" Thick.
    One Fine-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.215" Wd. × 0.073" Thick.    		Straight Rectangle
    Tapered Rectangle
    Tapered Half Round
    Tapered Round
    Tapered Triangle
    Tapered Square
    Tapered Knife
    Tapered Barrette
    Tapered Crossing
    Straight Joint
    Tapered Marking
    Straight Slitting    		Double CutPlastic PouchSteel, Iron4261A17000000
    4One Extra-Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick.
    One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick
    One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick.
    One Extra-Fine-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia.
    One Extra-Fine-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd.
    One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd.
    One Extra-Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg.×0.202" Wd.×0.067" Thick
    One Extra-Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.193" Wd. × 0.067" Thick.
    One Extra-Fine-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.187" Wd. × 0.067" Thick.
    One Extra-Fine-Finish Joint File with Plain Faces and Double-Cut Edges—5 1/2" Lg. × 0.191" Wd. × 0.050" Thick.
    One Extra-Fine-Finish Tapered Marking File with Double-Cut Faces—5 1/2" Lg. × 0.184" Wd. × 0.055" Thick.
    One Extra-Fine-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.215" Wd. × 0.073" Thick.    		Straight Rectangle
    Tapered Rectangle
    Tapered Half Round
    Tapered Round
    Tapered Triangle
    Tapered Square
    Tapered Knife
    Tapered Barrette
    Tapered Crossing
    Straight Joint
    Tapered Marking
    Straight Slitting    		Double CutPlastic PouchSteel, Iron4261A18000000
     
    6 1/4" Long
    0One Medium-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick.
    One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick.
    One Medium-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick.
    One Medium-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia.
    One Medium-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd.
    One Medium-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd.
    One Medium-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—6 1/4" Lg. × 0.213" Wd. × 0.059" Thick
    One Medium-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.201" Wd. × 0.071" Thick.
    One Medium-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.201" Wd. × 0.079" Thick.
    One Medium-Finish Joint File with Plain Faces and Double-Cut Edges—6 1/4" Lg. × 0.209" Wd. × 0.051" Thick.
    One Medium-Finish Tapered Marking File with Double-Cut Faces—6 1/4" Lg. × 0.209" Wd. × 0.071" Thick.
    One Medium-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.236" Wd. × 0.086" Thick.    		Straight Rectangle
    Tapered Rectangle
    Tapered Half Round
    Tapered Round
    Tapered Triangle
    Tapered Square
    Tapered Knife
    Tapered Barrette
    Tapered Crossing
    Straight Joint
    Tapered Marking
    Straight Slitting    		Double CutPlastic PouchSteel, Iron4261A22000000
    2One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick.
    One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick.
    One Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick.
    One Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia.
    One Fine-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd.
    One Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd.
    One Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—6 1/4" Lg. × 0.213" Wd. × 0.059" Thick.
    One Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.201" Wd. × 0.071" Thick.
    One Fine-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.201" Wd. × 0.079" Thick.
    One Fine-Finish Joint File with Plain Faces and Double-Cut Edges—6 1/4" Lg. × 0.209" Wd. × 0.051" Thick.
    One Fine-Finish Tapered Marking File with Double-Cut Faces—6 1/4" Lg. × 0.209" Wd. × 0.071" Thick.
    One Fine-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.236" Wd. × 0.086" Thick.    		Straight Rectangle
    Tapered Rectangle
    Tapered Half Round
    Tapered Round
    Tapered Triangle
    Tapered Square
    Tapered Knife
    Tapered Barrette
    Tapered Crossing
    Straight Joint
    Tapered Marking
    Straight Slitting    		Double CutPlastic PouchSteel, Iron4261A23000000
    4One Extra-Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick.
    One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick
    One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick.
    One Extra-Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia.
    One Extra-Fine-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd.
    One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd.
    One Extra-Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—6 1/4" Lg.×0.213" Wd.×0.059" Thick
    One Extra-Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.201" Wd. × 0.071" Thick.
    One Extra-Fine-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.201" Wd. × 0.079" Thick.
    One Extra-Fine-Finish Joint File with Plain Faces and Double-Cut Edges—6 1/4" Lg. × 0.209" Wd. × 0.051" Thick.
    One Extra-Fine-Finish Tapered Marking File with Double-Cut Faces—6 1/4" Lg. × 0.209" Wd. × 0.071" Thick.
    One Extra-Fine-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.236" Wd. × 0.086" Thick.    		Straight Rectangle
    Tapered Rectangle
    Tapered Half Round
    Tapered Round
    Tapered Triangle
    Tapered Square
    Tapered Knife
    Tapered Barrette
    Tapered Crossing
    Straight Joint
    Tapered Marking
    Straight Slitting    		Double CutPlastic PouchSteel, Iron4261A24000000
    6One Extra-Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick.
    One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick
    One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick.
    One Extra-Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia.
    One Extra-Fine-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd.
    One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd.
    One Extra-Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—6 1/4" Lg.×0.213" Wd.×0.059" Thick
    One Extra-Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.201" Wd. × 0.071" Thick.
    One Extra-Fine-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.201" Wd. × 0.079" Thick.
    One Extra-Fine-Finish Joint File with Plain Faces and Double-Cut Edges—6 1/4" Lg. × 0.209" Wd. × 0.051" Thick.
    One Extra-Fine-Finish Tapered Marking File with Double-Cut Faces—6 1/4" Lg. × 0.209" Wd. × 0.071" Thick.
    One Extra-Fine-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.236" Wd. × 0.086" Thick.    		Straight Rectangle
    Tapered Rectangle
    Tapered Half Round
    Tapered Round
    Tapered Triangle
    Tapered Square
    Tapered Knife
    Tapered Barrette
    Tapered Crossing
    Straight Joint
    Tapered Marking
    Straight Slitting    		Double CutPlastic PouchSteel, Iron4261A25000000
     
    12 Piece Sets with Rubber-Coated Plastic Handle
    Image of Product. Top orientation. Files. Needle File Sets, 12 Piece Sets with Rubber-Coated Plastic Handle.
    Image of Specification. Straight Rectangle. Front orientation. ZoomedIn view. Rectangle. Needle File Sets, .
    Image of Specification. Tapered Rectangle. Front orientation. ZoomedIn view. Rectangle. Needle File Sets, .
    Image of Specification. Front orientation. ZoomedIn view. Half Round. Needle File Sets, Taper File.
    Image of Specification. Front orientation. ZoomedIn view. Round. Needle File Sets, Taper File.

    Straight Rectangle

    Tapered Rectangle

    Half Round

    Round

    Image of Specification. Front orientation. ZoomedIn view. Triangle. Needle File Sets, Taper File.
    Image of Specification. Front orientation. ZoomedIn view. Square. Needle File Sets, Taper File.
    Image of Specification. Front orientation. ZoomedIn view. Knife. Needle File Sets, Taper File.
    Image of Specification. Front orientation. ZoomedIn view. Barrette. Needle File Sets, Taper File.

    Triangle

    Square

    Knife

    Barrette

    Image of Specification. Front orientation. ZoomedIn view. Crossing. Needle File Sets, Taper File.
    Image of Specification. Front orientation. ZoomedIn view. Joint. Needle File Sets, Straight File.
    Image of Specification. Front orientation. ZoomedIn view. Marking. Needle File Sets, Taper File.
    Image of Specification. Front orientation. ZoomedIn view. Slitting. Needle File Sets, Straight File.

    Crossing

    Joint

    Marking

    Slitting

    Files with rubber-coated plastic handles are cushioned and comfortable to hold. Each handle has a hole so you can hang the file.
    Double-Cut Face—Double-cut files have two sets of diagonal teeth. They remove material more quickly than single-cut files, but you’ll need to use heavier pressure.
    Single-Cut Face—Single-cut files are often used with light pressure to slowly remove material and sharpen tool-cutting surfaces.
    File Cut
    No.
    Includes
    File Shape
    Face Tooth Style
    Container Type
    For Use On
    Each
    5 1/2" Long
    0One Medium-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.23" Wd. × 0.055" Thick.
    One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.25" Wd. × 0.054" Thick.
    One Medium-Finish Tapered Round File with Single Face—5 1/2" Lg. × 0.124" Dia.
    One Medium-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.12" Wd.
    One Medium-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.1" Wd.
    One Medium-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg. × 0.197" Wd. × 0.078" Thick
    One Medium-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.21" Wd. × 0.087" Thick.
    One Medium-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.17" Wd. × 0.095" Thick.
    One Medium-Finish Joint File with Plain Faces and Single-Cut Edges—5 1/2" Lg. × 0.236" Wd. × 0.049" Thick.
    One Medium-Finish Tapered Marking File with Plain Face and Single-Cut Face—5 1/2" Lg. × 0.193" Wd. × 0.073" Thick.
    One Medium-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.21" Wd. × 0.09" Thick.
    One Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.195" Wd. × 0.078" Thick.    		Straight Rectangle
    Tapered Rectangle
    Tapered Half Round
    Tapered Round
    Tapered Triangle
    Tapered Square
    Tapered Knife
    Tapered Barrette
    Tapered Crossing
    Straight Joint
    Tapered Marking
    Straight Slitting    		Double Cut, Single CutPouch with Zipper ClosureSteel, Iron4261A140000000
    2One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.23" Wd. × 0.055" Thick.
    One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.25" Wd. × 0.054" Thick.
    One Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.195" Wd. × 0.078" Thick.
    One Fine-Finish Tapered Round File with Single Face—5 1/2" Lg. × 0.124" Dia.
    One Fine-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.12" Wd.
    One Fine-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.1" Wd.
    One Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg. × 0.197" Wd. × 0.078" Thick.
    One Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.21" Wd. × 0.087" Thick.
    One Fine-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.17" Wd. × 0.095" Thick.
    One Fine-Finish Joint File with Plain Faces and Single-Cut Edges—5 1/2" Lg. × 0.236" Wd. × 0.049" Thick.
    One Fine-Finish Tapered Marking File with Plain Face and Single-Cut Face—5 1/2" Lg. × 0.193" Wd. × 0.073" Thick.
    One Fine-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.21" Wd. × 0.09" Thick.    		Straight Rectangle
    Tapered Rectangle
    Tapered Half Round
    Tapered Round
    Tapered Triangle
    Tapered Square
    Tapered Knife
    Tapered Barrette
    Tapered Crossing
    Straight Joint
    Tapered Marking
    Straight Slitting    		Double Cut, Single CutPouch with Zipper ClosureSteel, Iron4261A15000000
    4One Extra-Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.23" Wd. × 0.055" Thick.
    One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.25" Wd. × 0.054" Thick.
    One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.195" Wd. × 0.078" Thick.
    One Extra-Fine-Finish Tapered Round File with Single Face—5 1/2" Lg. × 0.124" Dia.
    One Extra-Fine-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.12" Wd.
    One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.1" Wd.
    One Extra-Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg. × 0.197" Wd. × 0.078" T
    One Extra-Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.21" Wd. × 0.087" Thick.
    One Extra-Fine-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.17" Wd. × 0.095" Thick.
    One Extra-Fine-Finish Joint File with Plain Faces and Single-Cut Edges—5 1/2" Lg. × 0.236" Wd. × 0.049" Thick.
    One Extra-Fine-Finish Tapered Marking File with Plain Face and Single-Cut Face—5 1/2" Lg. × 0.193" Wd. × 0.073" Thick.
    One Extra-Fine-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.21" Wd. × 0.09" Thick.    		Straight Rectangle
    Tapered Rectangle
    Tapered Half Round
    Tapered Round
    Tapered Triangle
    Tapered Square
    Tapered Knife
    Tapered Barrette
    Tapered Crossing
    Straight Joint
    Tapered Marking
    Straight Slitting    		Double Cut, Single CutPouch with Zipper ClosureSteel, Iron4261A21000000
     
    6 1/4" Long
    0One Medium-Finish Rectangular File with Double-Cut Faces—6 1/4" Lg. × 0.23" Wd. × 0.05" Thick.
    One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.27" Wd. × 0.042" Thick.
    One Medium-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.197" Wd. × 0.07" Thick.
    One Medium-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.12" Dia.
    One Medium-Finish Tapered Triangular File with Single-Cut Faces—6 1/4" Lg. × 0.13" Wd.
    One Medium-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.098" Wd.
    One Medium-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—6 1/4" Lg. × 0.2" Wd. × 0.073" Thick.
    One Medium-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.21" Wd. × 0.09" Thick.
    One Medium-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.19" Wd. × 0.09" Thick.
    One Medium-Finish Joint File with Plain Faces and Single-Cut Edges—6 1/4" Lg. × 0.23" Wd. × 0.05" Thick.
    One Medium-Finish Tapered Marking File with Plain Face and Single-Cut Face—6 1/4" Lg. × 0.198" Wd. × 0.073" Thick.
    One Medium-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.21" Wd. × 0.09" Thick.    		Straight Rectangle
    Tapered Rectangle
    Tapered Half Round
    Tapered Round
    Tapered Triangle
    Tapered Square
    Tapered Knife
    Tapered Barrette
    Tapered Crossing
    Straight Joint
    Tapered Marking
    Straight Slitting    		Double Cut, Single CutPouch with Zipper ClosureSteel, Iron4261A311000000
    2One Fine-Finish Rectangular File with Double-Cut Faces—6 1/4" Lg. × 0.23" Wd. × 0.05" Thick.
    One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.27" Wd. × 0.042" Thick.
    One Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.197" Wd. × 0.07" Thick.
    One Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.12" Dia.
    One Fine-Finish Tapered Triangular File with Single-Cut Faces—6 1/4" Lg. × 0.13" Wd.
    One Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.098" Wd.
    One Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—6 1/4" Lg. × 0.2" Wd. × 0.073" Thick.
    One Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.21" Wd. × 0.09" Thick.
    One Fine-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.19" Wd. × 0.09" Thick.
    One Fine-Finish Joint File with Plain Faces and Single-Cut Edges—6 1/4" Lg. × 0.23" Wd. × 0.05" Thick.
    One Fine-Finish Tapered Marking File with Plain Face and Single-Cut Face—6 1/4" Lg. × 0.198" Wd. × 0.073" Thick.
    One Fine-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.21" Wd. × 0.09" Thick.    		Straight Rectangle
    Tapered Rectangle
    Tapered Half Round
    Tapered Round
    Tapered Triangle
    Tapered Square
    Tapered Knife
    Tapered Barrette
    Tapered Crossing
    Straight Joint
    Tapered Marking
    Straight Slitting    		Double Cut, Single CutPouch with Zipper ClosureSteel, Iron4261A312000000
    4One Extra-Fine-Finish Rectangular File with Double-Cut Faces—6 1/4" Lg. × 0.23" Wd. × 0.05" Thick.
    One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.27" Wd. × 0.042" Thick.
    One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.197" Wd. × 0.07" Thick.
    One Extra-Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.12" Dia.
    One Extra-Fine-Finish Tapered Triangular File with Single-Cut Faces—6 1/4" Lg. × 0.13" Wd.
    One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.098" Wd.
    One Extra-Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—6 1/4" Lg. × 0.2" Wd. × 0.073" Thi
    One Extra-Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.21" Wd. × 0.09" Thick.
    One Extra-Fine-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.19" Wd. × 0.09" Thick.
    One Extra-Fine-Finish Joint File with Plain Faces and Single-Cut Edges—6 1/4" Lg. × 0.23" Wd. × 0.05" Thick.
    One Extra-Fine-Finish Tapered Marking File with Plain Face and Single-Cut Face—6 1/4" Lg. × 0.198" Wd. × 0.073" Thick.
    One Extra-Fine-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.21" Wd. × 0.09" Thick.    		Straight Rectangle
    Tapered Rectangle
    Tapered Half Round
    Tapered Round
    Tapered Triangle
    Tapered Square
    Tapered Knife
    Tapered Barrette
    Tapered Crossing
    Straight Joint
    Tapered Marking
    Straight Slitting    		Double Cut, Single CutPouch with Zipper ClosureSteel, Iron4261A313000000
     

    Economy Needle File Sets

    These files are for infrequent use. The small tips allow precise work in tight spots. These files do not include a handle but do have a tang that fits into a handle. Length includes the tang.
    12 Pieces—5 1/2" Long
    Image of Product. Front orientation. Files. Economy Needle File Sets, 12 Pieces.
    Image of Specification. Straight Rectangle. Front orientation. ZoomedIn view. Rectangle. Economy Needle File Sets, .
    Image of Specification. Tapered Rectangle. Front orientation. ZoomedIn view. Rectangle. Economy Needle File Sets, .
    Image of Specification. Front orientation. ZoomedIn view. Half Round. Economy Needle File Sets, Taper File.
    Image of Specification. Front orientation. ZoomedIn view. Round. Economy Needle File Sets, Taper File.

    Straight Rectangle

    Tapered Rectangle

    Half Round

    Round

    Image of Specification. Front orientation. ZoomedIn view. Triangle. Economy Needle File Sets, Taper File.
    Image of Specification. Front orientation. ZoomedIn view. Square. Economy Needle File Sets, Taper File.
    Image of Specification. Front orientation. ZoomedIn view. Knife. Economy Needle File Sets, Taper File.
    Image of Specification. Front orientation. ZoomedIn view. Barrette. Economy Needle File Sets, Taper File.

    Triangle

    Square

    Knife

    Barrette

    Image of Specification. Front orientation. ZoomedIn view. Crossing. Economy Needle File Sets, Taper File.
    Image of Specification. Front orientation. ZoomedIn view. Joint. Economy Needle File Sets, Straight File.
    Image of Specification. Front orientation. ZoomedIn view. Marking. Economy Needle File Sets, Taper File.
    Image of Specification. Front orientation. ZoomedIn view. Slitting. Economy Needle File Sets, Straight File.

    Crossing

    Joint

    Marking

    Slitting

    File Cut
    No.
    Includes
    File Shape
    For Use On
    Each
    0One Medium-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick.
    One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.182" Wd. × 0.047" Thick.
    One Medium-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick.
    One Medium-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia.
    One Medium-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd.
    One Medium-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd.
    One Medium-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg. × 0.202" Wd. × 0.067" Thick.
    One Medium-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.193" Wd. × 0.067" Thick.
    One Medium-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.187" Wd. × 0.067" Thick.
    One Medium-Finish Joint File with Plain Faces and Double-Cut Edges—5 1/2" Lg. × 0.191" Wd. × 0.050" Thick.
    One Medium-Finish Tapered Marking File with Double-Cut Faces—5 1/2" Lg. × 0.184" Wd. × 0.055" Thick.
    One Medium-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.215" Wd. × 0.073" Thick.    		Straight Rectangle
    Tapered Rectangle
    Tapered Half Round
    Tapered Round
    Tapered Triangle
    Tapered Square
    Tapered Knife
    Tapered Barrette
    Tapered Crossing
    Straight Joint
    Tapered Marking
    Straight Slitting    		Steel, Iron8174A41000000
    2One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick.
    One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.182" Wd. × 0.047" Thick.
    One Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick.
    One Fine-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia.
    One Fine-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd.
    One Fine-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd.
    One Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg.×0.202" Wd.×0.067" Thick.
    One Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.193" Wd. × 0.067" Thick.
    One Fine-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.187" Wd. × 0.067" Thick.
    One Fine-Finish Joint File with Plain Faces and Double-Cut Edges—5 1/2" Lg. × 0.191" Wd. × 0.050" Thick.
    One Fine-Finish Tapered Marking File with Double-Cut Faces—5 1/2" Lg. × 0.184" Wd. × 0.055" Thick.
    One Fine-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.215" Wd. × 0.073" Thick.    		Straight Rectangle
    Tapered Rectangle
    Tapered Half Round
    Tapered Round
    Tapered Triangle
    Tapered Square
    Tapered Knife
    Tapered Barrette
    Tapered Crossing
    Straight Joint
    Tapered Marking
    Straight Slitting    		Steel, Iron8174A4200000
    4One Extra-Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick.
    One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.182" Wd. × 0.047" Thick
    One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick.
    One Extra-Fine-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia.
    One Extra-Fine-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd.
    One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd.
    One Extra-Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg.×0.202" Wd.×0.067" Thick
    One Extra-Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.193" Wd. × 0.067" Thick.
    One Extra-Fine-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.187" Wd. × 0.067" Thick.
    One Extra-Fine-Finish Joint File with Plain Faces and Double-Cut Edges—5 1/2" Lg. × 0.191" Wd. × 0.050" Thick.
    One Extra-Fine-Finish Tapered Marking File with Double-Cut Faces—5 1/2" Lg. × 0.184" Wd. × 0.055" Thick.
    One Extra-Fine-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.215" Wd. × 0.073" Thick.    		Straight Rectangle
    Tapered Rectangle
    Tapered Half Round
    Tapered Round
    Tapered Triangle
    Tapered Square
    Tapered Knife
    Tapered Barrette
    Tapered Crossing
    Straight Joint
    Tapered Marking
    Straight Slitting    		Steel, Iron8174A5100000
    12 Pieces—6 1/4" Long
    Image of Product. Front orientation. Files. Economy Needle File Sets, 12 Pieces.
    Image of Specification. Straight Rectangle. Front orientation. ZoomedIn view. Rectangle. Economy Needle File Sets, .
    Image of Specification. Tapered Rectangle. Front orientation. ZoomedIn view. Rectangle. Economy Needle File Sets, .
    Image of Specification. Front orientation. ZoomedIn view. Half Round. Economy Needle File Sets, Taper File.
    Image of Specification. Front orientation. ZoomedIn view. Round. Economy Needle File Sets, Taper File.

    Straight Rectangle

    Tapered Rectangle

    Half Round

    Round

    Image of Specification. Front orientation. ZoomedIn view. Triangle. Economy Needle File Sets, Taper File.
    Image of Specification. Front orientation. ZoomedIn view. Square. Economy Needle File Sets, Taper File.
    Image of Specification. Front orientation. ZoomedIn view. Knife. Economy Needle File Sets, Taper File.
    Image of Specification. Front orientation. ZoomedIn view. Barrette. Economy Needle File Sets, Taper File.

    Triangle

    Square

    Knife

    Barrette

    Image of Specification. Front orientation. ZoomedIn view. Crossing. Economy Needle File Sets, Taper File.
    Image of Specification. Front orientation. ZoomedIn view. Joint. Economy Needle File Sets, Straight File.
    Image of Specification. Front orientation. ZoomedIn view. Marking. Economy Needle File Sets, Taper File.
    Image of Specification. Front orientation. ZoomedIn view. Slitting. Economy Needle File Sets, Straight File.

    Crossing

    Joint

    Marking

    Slitting

    File Cut
    No.
    Includes
    File Shape
    For Use On
    Each
    0One Medium-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick.
    One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick.
    One Medium-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick.
    One Medium-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia.
    One Medium-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd.
    One Medium-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd.
    One Medium-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—6 1/4" Lg. × 0.213" Wd. × 0.059" Thick
    One Medium-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.201" Wd. × 0.071" Thick.
    One Medium-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.201" Wd. × 0.079" Thick.
    One Medium-Finish Joint File with Plain Faces and Double-Cut Edges—6 1/4" Lg. × 0.209" Wd. × 0.051" Thick.
    One Medium-Finish Tapered Marking File with Double-Cut Faces—6 1/4" Lg. × 0.209" Wd. × 0.071" Thick.
    One Medium-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.236" Wd. × 0.086" Thick.    		Straight Rectangle
    Tapered Rectangle
    Tapered Half Round
    Tapered Round
    Tapered Triangle
    Tapered Square
    Tapered Knife
    Tapered Barrette
    Tapered Crossing
    Straight Joint
    Tapered Marking
    Straight Slitting    		Steel, Iron8174A45000000
    2One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick.
    One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick.
    One Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick.
    One Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia.
    One Fine-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd.
    One Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd.
    One Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—6 1/4" Lg. × 0.213" Wd. × 0.059" Thick.
    One Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.201" Wd. × 0.071" Thick.
    One Fine-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.201" Wd. × 0.079" Thick.
    One Fine-Finish Joint File with Plain Faces and Double-Cut Edges—6 1/4" Lg. × 0.209" Wd. × 0.051" Thick.
    One Fine-Finish Tapered Marking File with Double-Cut Faces—6 1/4" Lg. × 0.209" Wd. × 0.071" Thick.
    One Fine-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.236" Wd. × 0.086" Thick.    		Straight Rectangle
    Tapered Rectangle
    Tapered Half Round
    Tapered Round
    Tapered Triangle
    Tapered Square
    Tapered Knife
    Tapered Barrette
    Tapered Crossing
    Straight Joint
    Tapered Marking
    Straight Slitting    		Steel, Iron8174A4600000
    4One Extra-Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick.
    One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick
    One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick.
    One Extra-Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia.
    One Extra-Fine-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd.
    One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd.
    One Extra-Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—6 1/4" Lg.×0.213" Wd.×0.059" Thick
    One Extra-Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.201" Wd. × 0.071" Thick.
    One Extra-Fine-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.201" Wd. × 0.079" Thick.
    One Extra-Fine-Finish Joint File with Plain Faces and Double-Cut Edges—6 1/4" Lg. × 0.209" Wd. × 0.051" Thick.
    One Extra-Fine-Finish Tapered Marking File with Double-Cut Faces—6 1/4" Lg. × 0.209" Wd. × 0.071" Thick.
    One Extra-Fine-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.236" Wd. × 0.086" Thick.    		Straight Rectangle
    Tapered Rectangle
    Tapered Half Round
    Tapered Round
    Tapered Triangle
    Tapered Square
    Tapered Knife
    Tapered Barrette
    Tapered Crossing
    Straight Joint
    Tapered Marking
    Straight Slitting    		Steel, Iron8174A4700000

    Precision File Sets

    Made to exacting measurements, the files in these sets give you precise control over how much material you remove. Also known as Swiss-pattern files, they create more consistent finishes than American-pattern files. Use them for smoothing intricate parts and other applications where accuracy is key. All files are double cut, which means their surface has two sets of diagonal teeth. They remove material more quickly than single cut files, but you’ll need to use heavier pressure.
    6 Pieces
    Image of Product. Front orientation. Files. Precision File Sets, 6 Pieces.
    Image of Specification. Straight Rectangle. Front orientation. ZoomedIn view. Rectangle. Precision File Sets, .
    Image of Specification. Thin-Tapered Rectangle. Front orientation. ZoomedIn view. Rectangle. Precision File Sets, Thin Taper File.

    Straight Rectangle

    Thin-Tapered

    Rectangle

    Image of Specification. Front orientation. ZoomedIn view. Half Round. Precision File Sets, Taper File.
    Image of Specification. Front orientation. ZoomedIn view. Round. Precision File Sets, Taper File.

    Half Round

    Round

    Image of Specification. Straight Triangle. Front orientation. ZoomedIn view. Triangle. Precision File Sets, Straight File.
    Image of Specification. Straight Knife. Front orientation. ZoomedIn view. Knife. Precision File Sets, Straight File.

    Straight Triangle

    Straight Knife

    File Cut
    No.
    Includes
    File Shape
    Container
    Type
    For Use On
    Each
    0One Medium-Finish Rectangular File with Double-Cut Faces—6" Lg.
    One Medium-Finish Thin-Tapered Rectangular File with Double-Cut Faces—6" Lg.
    One Medium-Finish Tapered Half-Round File with Double-Cut Faces—6" Lg.
    One Medium-Finish Tapered Round File with Double-Cut Face—6" Lg.
    One Medium-Finish Triangular File with Double-Cut Faces—6" Lg.
    One Medium-Finish Knife File with Double-Cut Faces—6" Lg.    		Straight Rectangle
    Thin-Tapered Rectangle
    Tapered Half Round
    Tapered Round
    Straight Triangle
    Straight Knife    		Plastic PouchSteel, Iron42365A210000000
    2One Fine-Finish Rectangular File with Double-Cut Faces—6" Lg.
    One Fine-Finish Thin-Tapered Rectangular File with Double-Cut Faces—6" Lg.
    One Fine-Finish Tapered Half-Round File with Double-Cut Faces—6" Lg.
    One Fine-Finish Tapered Round File with Double-Cut Face—6" Lg.
    One Fine-Finish Triangular File with Double-Cut Faces—6" Lg.
    One Fine-Finish Knife File with Double-Cut Faces—6" Lg.    		Straight Rectangle
    Thin-Tapered Rectangle
    Tapered Half Round
    Tapered Round
    Straight Triangle
    Straight Knife    		Plastic PouchSteel, Iron42365A22000000
    4One Extra Fine-Finish Rectangular File with Double-Cut Faces—6" Lg.
    One Extra Fine-Finish Thin-Tapered Rectangular File with Double-Cut Faces—6" Lg.
    One Extra Fine-Finish Tapered Half-Round File with Double-Cut Faces—6" Lg.
    One Extra Fine-Finish Tapered Round File with Double-Cut Face—6" Lg.
    One Extra Fine-Finish Triangular File with Double-Cut Faces—6" Lg.
    One Extra Fine-Finish Knife File with Double-Cut Faces—6" Lg.    		Straight Rectangle
    Thin-Tapered Rectangle
    Tapered Half Round
    Tapered Round
    Straight Triangle
    Straight Knife    		Plastic PouchSteel, Iron42365A23000000

    Push-On File Handles

    Image of Product. Front orientation. File Handles. Push-On File Handles, Style A.
    Image of Product. Front orientation. File Handles. Push-On File Handles, Style B.
    Image of Product. Front orientation. File Handles. Push-On File Handles, Style C.
    Image of Product. Front orientation. File Handles. Push-On File Handles, Style D.

    Style A

    Style B

    Style C

    Style D

    Push one of these handles onto a file tang. They’re shaped to fit comfortably in your hand.
    Style C—Style C handles have ridges for a secure grip even when your hands are greasy or wet.
    Style D—Style D handles keep your round files from rolling away. They have beveled edges and a comfortable grip.
    For
    File Tang
    Style
    For File
    Lg.
    Dia.
    Wd.
    Lg.
    Material
    Ferrule
    Material
    Each
    A8" to 12"15/64" to 1/4"—5"WoodSteel4318A300000
    A12" to 16"19/64" to 5/16"—5 1/2"WoodSteel4318A40000
    A3" to 6"7/64" to 1/8"—4"WoodSteel4318A10000
    A6" to 8"5/32" to 11/64"—4 1/2"WoodSteel4318A20000
    A16" to 20"21/64" to 11/32"—6"WoodSteel4318A50000
    B4" to 6"11/64" to 3/16"—4"WoodSteel4320A520000
    B10" to 14"23/64" to 3/8"—5"WoodSteel4320A550000
    B3" to 4"7/64" to 1/8"—3 1/2"WoodSteel4320A510000
    B6" to 8"13/64" to 7/32"—4 1/4"WoodSteel4320A530000
    B8" to 10"17/64" to 9/32"—4 3/4"WoodSteel4320A540000
    C4" to 6"—11/64" to 1/4"3 1/2"Plastic—42215A110000
    C8" to 10"—15/64" to 19/64"4 1/2"Plastic—42215A120000
    C12" to 14"—15/64" to 5/16"4 1/2"Plastic—42215A130000
    D4" to 6"—13/64" to 7/32"4 1/4"Plastic—4318A1110000
    D8" to 10"—7/32" to 17/64"4 1/2"Plastic—4318A1120000
    D12" to 14"—15/64" to 13/32"4 1/2"Plastic—4318A1140000

    File Sets

    Keep multiple files on hand for workpieces of different shapes and sizes.
    All sets include American-pattern files, also known as machinists' files.
    Don't see the set you need? Create your own with a tool roll and individual files.
    10 Pieces
    Image of Product. Front orientation. Files. File Sets, 10 Pieces.
    Image of Specification. Top orientation. ZoomedIn view. Rectangle. File Sets.
    Image of Specification. Top orientation. ZoomedIn view. Half Round. File Sets.

    Rectangle

    Half Round

    Image of Specification. Top orientation. ZoomedIn view. Round. File Sets.
    Image of Specification. Top orientation. ZoomedIn view. Square. File Sets.

    Round

    Square

    Image of Specification. Front orientation. ZoomedIn view. Knife. File Sets.

    Knife

    Double-Cut Face—Surface has two sets of diagonal teeth and is often used with heavier pressure than single cut for rapid material removal.
    Wood Handle—Files with wood handles have a durable grip that's shaped to fit comfortably in your hand.
    Lg.
    Wd.
    Face Tooth
    Style
    File
    Pattern
    Handle
    Material
    Container Type
    For Use On
    Each
    Rectangle, Half Round, Round, Square, and Knife—For Coarse and Medium Finish
    6", 10"3/8", 5/8", 15/16", 1"Double CutAmericanWoodCanvas Roll-Up PouchSteel, Iron42415A430000000
     

    Diamond Needle Files

    Image of Product. Front orientation. Files. Diamond Needle Files.
    The hardest files available, these are the longest lasting and strong enough to file hard materials. The small tip allows precise work in tight spots.
    Tapered Knife
    Image of Specification. Front orientation. ZoomedIn view. Knife. Diamond Needle Files, Tapered File.

    Tapered Knife

    Knife files get into tight angles, corners, and slots.
    For Coarse Finish (80
    to 100 Grit)
    For Medium Finish
    (120 to 150 Grit)
    For Fine Finish (150
    to 180 Grit)
    Diamond
    Surface Lg.
    Lg.
    Wd.
    Thk.
    For Use On
    Each
    Each
    Each
     
    Rigid
    2.75"5 1/2"0.213"0.063"Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Bricks4279A230000004279A160000004279A6000000
     

    Twist-On File Handles

    Image of Product. Front orientation. File Handles. Twist-On File Handles, Wood.

    Wood

    Image of Product. Front orientation. File Handles. Twist-On File Handles, Plastic.

    Plastic

    A steel insert cuts into file tangs for a secure hold.
    For File
    Lg.
    For File Tang
    Dia.
    Lg.
    Material
    Ferrule
    Material
    Each
    4"1/16" to 7/64"3 1/2"WoodSteel4322A200000
    5"1/8" to 5/32"4"WoodSteel4322A30000
    6"11/64" to 7/32"4"WoodSteel4322A40000
    8"15/64" to 17/64"4 1/2"WoodSteel4322A50000
    10"9/32" to 11/32"4 1/2"WoodSteel4322A60000
    12"21/64" to 3/8"5"WoodSteel4322A70000
    14"13/32" to 29/64"5"WoodSteel4322A80000
    4" to 6"11/64" to 7/32"3 3/4"Plastic—4322A1010000
    6" to 10"13/64" to 1/4"4 1/8"Plastic—4322A1020000
    8" to 12"5/16" to 23/64"4 1/8"Plastic—4322A1030000
    10" to 14"25/64" to 7/16"4 3/4"Plastic—4322A1040000
    12" to 16"7/16" to 31/64"5"Plastic—4322A1050000

    Push-On File Handles with Changeable Inserts

    Image of Product. Front orientation. File Handles. Push-On File Handles with Changeable Inserts, Style A.
    Image of Product. Front orientation. File Handles. Push-On File Handles with Changeable Inserts, Style B.
    Image of Product. Front orientation. File Handles. Push-On File Handles with Changeable Inserts, Style C.

    Style A

    Style B

    Style C

    Change the insert to accommodate different files.
    Style A—Style A handles give you good leverage to apply heavy pressure.
    Style B—Style B handles give you good leverage to apply heavy pressure. Handles are rubber coated for a cushioned grip.
    Style C—Style C handles are good for precision work on intricate parts. They fit in the palm of your hand like a ball to improve control.
    Style
    For File
    Lg.
    For File
    Tang Wd.
    Lg.
    Material
    Includes
    Each
    A6" to 10"5/32" to 3/8"4 1/2"PlasticFour Changeable Inserts42215A11100000
    B6" to 10"7/32" to 23/64"4 1/2"Rubber-Coated PlasticTwo Changeable Inserts42215A210000
    C6" to 10"5/32" to 3/8"2 1/4"PlasticFour Changeable Inserts42215A1120000

    Two-Hand File Holders for Flexible Scratch-Free Files

    Image of Product. Front orientation. File Handles. Two-Hand File Holders for Flexible Scratch-Free Files.
    Improve control and comfort when you file. These holders are compatible with flexible scratch-free files.
    File Mounting
    Style
    For File
    Lg.
    Lg.
    Material
    Each
    Screw On12" to 14"14"Steel4316A18000000

    Needle Files

    Image of Product. Front orientation. Files. Needle Files.
    The small tip allows precise work in tight spots. These files do not include a handle but do have a tang that fits into a handle. Length does not include the tang.
    Tapered Knife
    Image of Specification. Front orientation. ZoomedIn view. Knife. Needle Files, Tapered File.

    Tapered Knife

    Knife files get into tight angles, corners, and slots.
    Double Cut—Surface has two sets of diagonal teeth and is often used with heavier pressure than single cut for rapid material removal.
    Single-Cut Edge—Surface has one set of diagonal teeth and is often used with light pressure to slowly remove material and sharpen tool-cutting surfaces.
    For Medium
    Finish (No. 0)
    For Extra Fine
    Finish (No. 4)
    Lg.
    Wd.
    Thk.
    Edge Tooth Style
    For Use On
    Each
    Each
    Double Cut
     
    Rigid
    3"0.213"0.059"Single Cut Knife Edge × Thick Edge Without TeethSteel, Iron———04261A46000000
    3 1/4"0.213"0.059"Single Cut Knife Edge × Thick Edge Without TeethSteel, Iron4261A44000000———0
     

    Carbide Needle Files

    Image of Product. Front orientation. Files. Carbide Needle Files.
    Second only to diamond in hardness, these files last 100 times longer than standard files. The small tip allows precise work in tight spots.
    Tapered Knife
    Image of Specification. Front orientation. ZoomedIn view. Knife. Carbide Needle Files, Tapered File.

    Tapered Knife

    Knife files get into tight angles, corners, and slots.
    For Extra Fine
    Finish (280 Grit)
    Lg.
    Wd.
    Thk.
    For Use On
    Each
     
    Rigid
    5 1/2"0.207"0.089"Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbon Fiber, Graphite, Bricks4288A12000000
    7 1/8"0.354"0.128"Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbon Fiber, Graphite, Bricks4288A2200000
     

    Jaw-Grip File Handles

    Image of Product. Front orientation. File Handles. Jaw-Grip File Handles, Style A.
    Image of Product. Front orientation. File Handles. Jaw-Grip File Handles, Style B.
    Image of Product. Front orientation. File Handles. Jaw-Grip File Handles, Style C.

    Style A

    Style B

    Style C

    Jaws clamp down to grip file tangs and shanks securely, but they are easily released to change files.
    For
    File Tang
    Style
    For File
    Lg.
    Dia.
    Wd.
    Lg.
    Material
    Each
    A5 1/2" to 8"7/64" to 5/32"—3 1/2"Plastic42215A2400000
    B1" to 16"—1/16" to 5/8"5"Plastic4255A1200000
    C5 1/2" to 7"1/8" to 11/64"—3 5/8"Wood4255A12100000

    Carbide Needle File Sets

    Image of Product. Front orientation. Files. Carbide Needle File Sets.
    Second only to diamond in hardness, these files last 100 times longer than standard files. The small tips allow precise work in tight spots.
    6 Pieces—5 1/2" Long
    Image of Specification. Front orientation. ZoomedIn view. Rectangle. Carbide Needle File Sets, .
    Image of Specification. Front orientation. ZoomedIn view. Round. Carbide Needle File Sets, Taper File.
    Image of Specification. Front orientation. ZoomedIn view. Triangle. Carbide Needle File Sets, Taper File.
    Image of Specification. Front orientation. ZoomedIn view. Square. Carbide Needle File Sets, Taper File.
    Image of Specification. Front orientation. ZoomedIn view. Knife. Carbide Needle File Sets, Taper File.

    Rectangle

    Round

    Triangle

    Square

    Knife

    Includes
    File Shape
    For Use On
    Each
    One Extra-Fine-Finish (280 Grit) Rectangular File—5 1/2" Lg. × 0.236" Wd. × 0.083" Thick.
    One Extra-Fine-Finish (280 Grit) Tapered Round File—5 1/2" Lg. × 0.128" Dia.
    One Extra-Fine-Finish (280 Grit) Tapered Triangular File—5 1/2" Lg. × 0.167" Wd.
    One Extra-Fine-Finish (280 Grit) Tapered Square File—5 1/2" Lg. × 0.128" Wd.
    One Extra-Fine-Finish (280 Grit) Tapered Knife File—5 1/2" Lg. × 0.207" Wd. × 0.089" Thick.
    One Plastic Handle    		Straight Rectangle
    Tapered Round
    Tapered Triangle
    Tapered Square
    Tapered Knife    		Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbon Fiber, Graphite, Bricks4288A16000000
    6 Pieces—7 1/8" Long
    Image of Specification. Front orientation. ZoomedIn view. Rectangle. Carbide Needle File Sets, .
    Image of Specification. Front orientation. ZoomedIn view. Round. Carbide Needle File Sets, Taper File.
    Image of Specification. Front orientation. ZoomedIn view. Triangle. Carbide Needle File Sets, Taper File.
    Image of Specification. Front orientation. ZoomedIn view. Square. Carbide Needle File Sets, Taper File.
    Image of Specification. Front orientation. ZoomedIn view. Knife. Carbide Needle File Sets, Taper File.

    Rectangle

    Round

    Triangle

    Square

    Knife

    Includes
    File Shape
    For Use On
    Each
    One Extra-Fine-Finish (280 Grit) Rectangular File—7 1/8" Lg. × 0.394" Wd. × 0.108" Thick.
    One Extra-Fine-Finish (280 Grit) Tapered Round File—7 1/8" Lg. × 0.217" Dia.
    One Extra-Fine-Finish (280 Grit) Tapered Triangular File—7 1/8" Lg. × 0.276" Wd.
    One Extra-Fine-Finish (280 Grit) Tapered Square File—7 1/8" Lg. × 0.197" Wd.
    One Extra-Fine-Finish (280 Grit) Tapered Knife File—7 1/8" Lg. × 0.354" Wd. × 0.128" Thick.
    One Plastic Handle    		Straight Rectangle
    Tapered Round
    Tapered Triangle
    Tapered Square
    Tapered Knife    		Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbon Fiber, Graphite, Bricks4288A26000000

    Sanding Strip File Handles

    Image of Product. Front orientation. Contains Annotated. File Handles. Sanding Strip File Handles.
    Attach a 1" wide sanding sheet to create your own file. Sheets and rolls are sold separately.
    For
    Sheet
    For Abrasive
    Mount Type
    Wd.
    Lg.
    Wd.
    Holder
    Lg.
    Handle
    Lg.
    Each
    Adhesive Back1"11"1"4 3/4"5 1/2"4647A5700000

    Sharpening Stone Sets

    Image of Product. Front orientation. Sharpening Stones. Sharpening Stone Sets.
    Keep multiple shapes of sharpening stones on hand for sharpening a range of tools and blades. Use these sharpening stones with a water-soluble or oil-based lubricant.
    Novaculite—Novaculite has extremely fine grains that cut very slowly for the most control over sharpening. Also known as Arkansas stones.
    No. of
    Pieces
    Includes
    Lubrication
    Container
    Type
    Each
    Novaculite
    4One Straight Knife 1000-Grit (Polished) Stone for Fluted and Serrated Blade Edges—29/32" Wd. × 1/8"-1/4" Thick.
    One Straight Round 1000-Grit (Polished) Stone for Curved Blade Edges—1/4" Dia.
    One Straight Square 1000-Grit (Polished) Stone for Straight Blade Edges—1/4" Wd. × 1/4" Thick.
    One Straight Triangular 1000-Grit (Polished) Stone for Straight and Serrated Blade Edges—1/4" Wd.    		RequiredBox4433A41000000
    4One Straight Knife 1000-Grit (Polished) Stone for Fluted and Serrated Blade Edges—29/32" Wd. × 1/8"-3/8" Thick.
    One Straight Round 1000-Grit (Polished) Stone for Curved Blade Edges—3/8" Dia.
    One Straight Square 1000-Grit (Polished) Stone for Straight Blade Edges—3/8" Wd. × 3/8" Thick.
    One Straight Triangular 1000-Grit (Polished) Stone for Straight and Serrated Blade Edges—3/8" Wd.    		RequiredBox4433A42000000
     

    Clog-Resistant Polishing Stones for Steel

    No need to stop and clean these stones as you polish—they’re filled with oil to keep debris from getting stuck in the pores. Use a holder to polish by hand or with a power tool (both sold separately). You’ll also need a water-soluble or oil-based lubricant to wash away debris and reduce friction and heat on your workpiece.
    Straight Knife
    Image of Product. Front orientation. Polishing Stones. Clog-Resistant Polishing Stones for Steel, Straight Knife.
    Image of Product. Front orientation. ZoomedIn view. Polishing Stones. Clog-Resistant Polishing Stones for Steel, Straight Knife.
    Aluminum Oxide Abrasive—Aluminum oxide stones, also known as India stones, scrape away material slowly to give you more control over how much material you take off. They are good for the final stage of polishing.
    Lg.
    Wd.
    Thk.
    Color
    Lubrication
    Each
    Aluminum Oxide—For Steel
     
    100 Grit (For Smooth Finish)
    4"1"1/16" to 1/8"BrownLubricated, Required4415A13000000
     
    240 Grit (For Extra-Smooth Finish)
    4"1"1/16" to 1/8"BrownLubricated, Required4415A1200000
     
    320 Grit (For Extra-Smooth Finish)
    4"1"1/16" to 1/8"OrangeLubricated, Required4415A1100000
     

    Handheld Sharpening Stones

    Grip by hand and sharpen tools at the angle you need.
    Straight Knife Stone—For Fluted and Serrated Blade Edges
    Image of Product. Front orientation. Sharpening Stones. Handheld Sharpening Stones, Straight Knife Stone—For Fluted and Serrated Blade Edges.
    Novaculite—Novaculite has extremely fine grains that cut very slowly for the most control over sharpening. Also known as Arkansas stones.
    Stone
    Lg.
    Wd.
    Stone
    Thickness
    Grit (For
    Finish)
    Lubrication
    Each
    Single Grit
     
    Novaculite
    3"1"1/8" to 1/4"800 (Polished)Required4433A39000000
     

    Edge-Straightening Knife Steels

    Image of Product. Front orientation. Knife Steels. Edge-Straightening Knife Steels.
    Also known as honing rods, these knife steels smooth tiny bends in your blade edge to maintain its sharpness. Unlike sharpeners, they don’t remove metal; they just straighten it. Use them between sharpening sessions to keep your blade in shape.
    Hand Guard—An oversized guard at the end of the handle keeps your hand safely out of the way.
    Lg.
    Dia.
    Overall
    Lg.
    Material
    Handle
    Material
    Features
    Each
    For Straight Blade Edges
    9"3/8"14"Steel
    		PlasticHand Guard3846A21000000
     

    Edge-Straightening and Sharpening Knife Steels

    Image of Product. Front orientation. Knife Steels. Edge-Straightening and Sharpening Knife Steels.
    Remove heavy surface defects to restore warped and worn blades back into cutting shape. Coated with an abrasive, these knife steels remove metal to sharpen your blade while also straightening it.
    Diamond Abrasive—Remove heavy amounts of material to fix deep imperfections.
    Ceramic Abrasive—Remove light amounts of material to refine and polish your blade edge. They're often used as a finishing step after coarser material removal or for regular touch-ups on blades that are still somewhat sharp.
    Hand Guard—An oversized guard at the end of the handle keeps your hand safely out of the way.
    Grit (For Finish)
    Lg.
    Dia.
    Overall
    Lg.
    Material
    Handle
    Material
    Features
    Each
    Diamond Abrasive
     
    For Straight Blade Edges
    320 (Extra Smooth)12"3/8"17"Steel
    		PlasticHand Guard3790A1000000
    600 (Polished)12"3/8"17"Steel
    		PlasticHand Guard3790A200000
     
    Ceramic Abrasive
     
    For Straight Blade Edges
    3000 (Polished)12"1/2"17"CeramicRubber
    		Hand Guard3790A3100000
     
    back to top