Filter by
Material
Drive Size
Drive Style
Sold As
Driver Style
Performance
Long Leg Length
Length
Relative Length
Short Leg Length
Overall Length
Finish
Ball Location
Color
RoHS
Export Control Classification Number (ECCN)
DFARS Specialty Metals
Driver Type
Ball Shape
L-Keys
 |
Length | |||||||||
|---|---|---|---|---|---|---|---|---|---|
Drive Size | Overall | Relative | Long Leg | Short Leg | Finish | Each | |||
Stainless Steel | |||||||||
Hex | |||||||||
| 1/8" | 2 7/16" | Short | 2 1/4" | 3/4" | __ | 53855A11 | 00000 | ||
| 3/16" | 3 3/4" | Short | 3 1/2" | 15/16" | __ | 53855A13 | 00000 | ||
| 7/32" | 4 3/4" | Long | 4 7/16" | 1 1/16" | __ | 53855A14 | 00000 | ||
| 1/4" | 4 15/16" | Long | 4 5/8" | 1 1/8" | __ | 53855A15 | 00000 | ||
| 5/16" | 5 1/8" | Long | 4 3/4" | 1 1/4" | __ | 53855A16 | 00000 | ||
| 3/8" | 5 13/16" | Short | 5 3/8" | 1 3/8" | __ | 53855A17 | 00000 | ||
| 1/2" | 7 3/8" | Long | 6 3/4" | 1 5/8" | __ | 53855A22 | 00000 | ||
| 2 mm | 2 1/8" | Short | 2" | 5/8" | __ | 53855A41 | 00000 | ||
| 2.5 mm | 2 3/8" | Short | 2 1/2" | 11/16" | __ | 53855A42 | 00000 | ||
| 3 mm | 2 5/8" | Short | 2 7/16" | 3/4" | __ | 53855A43 | 00000 | ||
| 4 mm | 2 7/8" | Short | 2 11/16" | 15/16" | __ | 53855A44 | 00000 | ||
| 5 mm | 3 5/16" | Short | 3 1/16" | 1 1/16" | __ | 53855A45 | 00000 | ||
| 6 mm | 3 3/4" | Short | 3 7/16" | 1 1/4" | __ | 53855A46 | 00000 | ||
| 7 mm | 4 1/2" | Long | 4 1/8" | 1 1/4" | __ | 53855A47 | 00000 | ||
| 8 mm | 4 3/4" | Short | 4 3/8" | 1 3/8" | __ | 53855A48 | 00000 | ||
| 10 mm | 5" | Short | 4 1/2" | 1 1/2" | __ | 53855A49 | 00000 | ||
Angled-Drive Ball-Tip L-Keys
 |  |
Turn screws at an angle when you can’t access them head on. These L-keys have a ball tip on the long leg that engages the drive with less contact than a straight tip. Ball tips are handy for corners and tightly packed areas, such as control panels and junction boxes. However, they don’t grip as tightly as straight tips and may strip the drive of the fastener if you crank them too hard. These L-keys are precision manufactured to tight tolerances.
Stainless Steel—These L-keys resist corrosion from salt water and other chemicals. Use them with stainless steel screws to avoid contaminating the drive—unlike steel tools, they won’t shed flakes that can rust.
Long—The most common option, these L-keys have a balanced length for everyday reach and torque.
Extra Long—Reach deep fasteners with the extra-long leg on these L-keys. Flip them around and grip the long leg with two hands for extra leverage to loosen stubborn screws.
Length | Ball | Each | Package | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Drive Size | Overall | Relative | Long Leg | Short Leg | Location | Shape | Finish | Max. Access Angle | Each | Pkg. Qty. | Pkg. | ||||
Stainless Steel | |||||||||||||||
Hex | |||||||||||||||
| 3/32" | 5 1/16" | Long | 4 7/16" | 3/4" | Single Ball | Round | __ | 20° | 5020A33 | 00000 | 10 | 5020A303 | 000000 | ||
| 7/64" | 4 7/8" | Long | 4 3/4" | 13/16" | Single Ball | Round | __ | 20° | 5020A34 | 0000 | 10 | 5020A304 | 00000 | ||
| 1/8" | 5" | Long | 4 7/8" | 7/8" | Single Ball | Round | __ | 20° | 5020A35 | 0000 | 10 | 5020A305 | 00000 | ||
| 9/64" | 5 3/8" | Long | 5 3/16" | 15/16" | Single Ball | Round | __ | 20° | 5020A36 | 0000 | 10 | 5020A306 | 00000 | ||
| 5/32" | 5 9/16" | Long | 5 3/8" | 1" | Single Ball | Round | __ | 20° | 5020A37 | 0000 | 10 | 5020A307 | 00000 | ||
| 3/16" | 6 1/4" | Extra Long | 6 1/16" | 1 1/16" | Single Ball | Round | __ | 20° | 5020A38 | 0000 | 10 | 5020A308 | 00000 | ||
| 1/4" | 7 1/2" | Extra Long | 7 1/4" | 1 5/16" | Single Ball | Round | __ | 20° | 5020A41 | 0000 | 10 | 5020A401 | 00000 | ||
| 5/16" | 8" | Extra Long | 7 11/16" | 1 7/16" | Single Ball | Round | __ | 20° | 5020A42 | 00000 | 10 | 5020A402 | 00000 | ||
| 3/8" | 9 1/2" | Extra Long | 9" | 1 11/16" | Single Ball | Round | __ | 20° | 5020A43 | 00000 | 5 | 5020A403 | 00000 | ||
| 1.5 mm | 3 9/16" | Long | 3 1/2" | 9/16" | Single Ball | Round | __ | 20° | 5020A21 | 0000 | 10 | 5020A201 | 00000 | ||
| 2 mm | 4 1/8" | Long | 4" | 5/8" | Single Ball | Round | __ | 20° | 5020A22 | 0000 | 10 | 5020A202 | 00000 | ||
| 2.5 mm | 4 9/16" | Extra Long | 4 7/16" | 3/4" | Single Ball | Round | __ | 20° | 5020A23 | 0000 | 10 | 5020A203 | 00000 | ||
| 3 mm | 5" | Extra Long | 4 7/8" | 7/8" | Single Ball | Round | __ | 20° | 5020A24 | 0000 | 10 | 5020A204 | 00000 | ||
| 4 mm | 5 11/16" | Extra Long | 5 3/8" | 1" | Single Ball | Round | __ | 20° | 5020A25 | 0000 | 10 | 5020A205 | 00000 | ||
| 5 mm | 6 5/16" | Extra Long | 6 1/16" | 1 1/16" | Single Ball | Round | __ | 20° | 5020A26 | 0000 | 10 | 5020A206 | 00000 | ||
| 6 mm | 7" | Extra Long | 6 3/4" | 1 1/4" | Single Ball | Round | __ | 20° | 5020A27 | 0000 | 10 | 5020A207 | 00000 | ||
| 8 mm | 8" | Extra Long | 7 11/16" | 1 7/16" | Single Ball | Round | __ | 20° | 5020A28 | 00000 | 10 | 5020A208 | 00000 | ||
| 10 mm | 9 1/2" | Extra Long | 9" | 1 11/16" | Single Ball | Round | __ | 20° | 5020A29 | 00000 | 10 | 5020A209 | 000000 | ||
L-Keys Sets
 |  |
Plastic Caddy | With Plastic Pouch |
Keep the most common L-key sizes in one portable set so the right size is always ready. These L-keys are precision manufactured to tight tolerances for an exact fit.
Alloy Steel—These L-keys handle high torque without bending or breaking, so they’ll last a lifetime.
Stainless Steel—These L-keys resist corrosion from salt water and other chemicals. Use them with stainless steel screws to avoid contaminating the drive—unlike steel tools, they won’t shed flakes that can rust.
Short—A short long leg fits into tight spaces where you have less room to swing, making these ideal for confined areas.
Long—The most common option, these L-keys have a balanced length for everyday reach and torque.
Zinc Flake Coated—Use these in marine, chemical processing, or harsh outdoor environments. Also known as Magni-coated, these L-keys have been tested to extreme standards, including 1,000 hours of salt spray.
No. of Pieces | Drive Size | Relative Lg. | Finish | Container Type | Each | |||
|---|---|---|---|---|---|---|---|---|
Alloy Steel | ||||||||
Hex | ||||||||
| 10 | 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4" | Short | Zinc Flake Coated | Plastic Caddy | 4891A28 | 000000 | ||
| 10 | 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4" | Long | Zinc Flake Coated | Plastic Caddy | 4891A18 | 00000 | ||
| 13 | 0.050", 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8" | Short | Zinc Flake Coated | Plastic Caddy | 4891A25 | 00000 | ||
| 13 | 0.050", 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8" | Long | Zinc Flake Coated | Plastic Caddy | 4891A15 | 00000 | ||
Stainless Steel | ||||||||
Hex | ||||||||
| 7 | 1/8", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8" | Short | __ | Plastic Pouch | 53855A18 | 00000 | ||
| 8 | 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm, 10 mm | Short | __ | Plastic Pouch | 53855A51 | 000000 | ||
Angled-Drive Ball-Tip L-Key Sets
|
 |  |
Plastic Caddy | Rubber Caddy |
 | |
Canvas Pouch |
Reach corners and tight spaces with the sizes you use most. These L-keys turn screws at an angle when you can’t access them head on. They have a ball tip on the long leg that engages the drive with less contact than a straight tip. Ball tips are handy for corners and tightly-packed areas, such as control panels and junction boxes. However, they don’t grip as tightly as straight tips, and may strip the drive of the fastener if you crank them too hard. These L-keys are precision manufactured to tight tolerances.
Alloy Steel—These L-keys handle high torque without bending or breaking, so they’ll last a lifetime.
Stainless Steel—These L-keys resist corrosion from salt water and other chemicals. Use them with stainless steel screws to avoid contaminating the drive—unlike steel tools, they won’t shed flakes that can rust.
Long—The most common option, these L-keys have a balanced length for everyday reach and torque.
Extra Long—Reach deep fasteners with the extra-long leg on these L-keys. Flip them around and grip the long leg with two hands for extra leverage to loosen stubborn screws.
Zinc Flake Coated—Use these in marine, chemical processing, or harsh outdoor environments. Also known as Magni-coated, these L-keys have been tested to extreme standards, including 1,000 hours of salt spray.
Ball | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
No. of Pieces | Drive Size | Relative Lg. | Location | Shape | Max. Access Angle | Finish | Container Type | Each | |||
Alloy Steel | |||||||||||
Hex | |||||||||||
| 10 | 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4" | Long | Single Ball | Round | 20° | Zinc Flake Coated | Plastic Caddy | 5888A36 | 000000 | ||
| 13 | 0.050", 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8" | Long | Single Ball | Round | 20° | Zinc Flake Coated | Plastic Caddy | 5888A38 | 00000 | ||
Stainless Steel | |||||||||||
Hex | |||||||||||
| 9 | 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 1/4", 5/16", 3/8" | Extra Long | Single Ball | Round | 20° | __ | Canvas Pouch | 5020A53 | 00000 | ||
| 9 | 1.5 mm, 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm, 10 mm | Extra Long | Single Ball | Round | 20° | __ | Rubber Caddy | 5020A52 | 00000 | ||
