Epson K-Sun Label Printer Tape
Create labels with your LabelShop, LabelWorks, or LabelWorks PX printer.
Vinyl tape is UV-resistant, so you can use it outdoors. Polyester tape holds up to dirt, oil, and cleaning better than vinyl tape.
Tape with a magnetic back can be pulled off and used again.
| Wd. | Color | Message Color | Manufacturer Model No. | For Printer Series | Thick. | Roll Lg., ft. | Temp. Range, °F | Each | |
Adhesive Back | |||||||||
|---|---|---|---|---|---|---|---|---|---|
Vinyl Plastic | |||||||||
| 1" | Yellow | Black | 224VTBYPX | LabelShop, LabelWorks, LabelWorks PX | 0.01" | 23 | -40° to 190° | 000000000 | 000000 |
Polyester Plastic | |||||||||
| 1/4" | Yellow | Black | 206BYPX | LabelShop, LabelWorks, LabelWorks PX | 0.01" | 30 | -80° to 300° | 000000000 | 00000 |
| 3/8" | Yellow | Black | 209BYPX | LabelShop, LabelWorks, LabelWorks PX | 0.01" | 30 | -80° to 300° | 000000000 | 00000 |
| 1/2" | Yellow | Black | 212BYPX | LabelShop, LabelWorks, LabelWorks PX | 0.01" | 30 | -80° to 300° | 000000000 | 00000 |
| 3/4" | Yellow | Black | 218BYPX | LabelShop, LabelWorks, LabelWorks PX | 0.01" | 30 | -80° to 300° | 000000000 | 00000 |
| 1" | Yellow | Black | 224BYPX | LabelShop, LabelWorks, LabelWorks PX | 0.01" | 30 | -80° to 300° | 000000000 | 00000 |
| 1 1/2" | Yellow | Black | 236BYPX | LabelShop, LabelWorks, LabelWorks PX | 0.01" | 30 | -65° to 255° | 0000000 | 00000 |
| 2" | Yellow | Black | 250BYPX | LabelShop, LabelWorks, LabelWorks PX | 0.01" | 26 | -65° to 255° | 0000000 | 00000 |
Magnetic Back | |||||||||
Polyester Plastic | |||||||||
| 1/2" | Yellow | Black | 212MTBYPX-4.9 | LabelShop, LabelWorks, LabelWorks PX | 0.02" | 5 | -25° to 170° | 0000000 | 00000 |
| 3/4" | Yellow | Black | 218MTBYPX-4.9 | LabelShop, LabelWorks, LabelWorks PX | 0.02" | 5 | -25° to 170° | 0000000 | 00000 |
| 1" | Yellow | Black | 224MTBYPX-4.9 | LabelShop, LabelWorks, LabelWorks PX | 0.02" | 5 | -25° to 170° | 0000000 | 00000 |
Epson K-Sun Label Printer Tape for Wire and Cable
Create custom labels for wire and cable with your Epson K-Sun printer.
Slide heat-shrink tubing tape over the cut end of a wire or cable, then apply heat for a snug fit.
For Wire | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Wd. | Color | Message Color | Manufacturer Model No. | Gauge | OD | For Printer Series | Thick. | Roll Lg., ft. | Temp. Range, °F | Each | |
Continuous Heat-Shrink Tubing | |||||||||||
Polyolefin Plastic | |||||||||||
| 1/8" | Yellow | Black | 203YLBYPX | 22-16 | 0.03"-0.05" | LabelShop, LabelWorks, LabelWorks PX | 0.02" | 8 | -60° to 220° | 00000000 | 000000 |
| 3/16" | Yellow | Black | 205STBYPX | 12-8 | 0.08"-0.13" | LabelShop, LabelWorks, LabelWorks PX | 0.01" | 8 | -60° to 220° | 00000000 | 00000 |
| 1/4" | Yellow | Black | 208B20BYPX | 18-6 | 0.04"-0.16" | LabelShop, LabelWorks, LabelWorks PX | 0.02" | 8 | -60° to 220° | 0000000 | 00000 |
| 1/2" | Yellow | Black | 211STBYPX | 8-2 | 0.13"-0.26" | LabelShop, LabelWorks, LabelWorks PX | 0.01" | 8 | -60° to 220° | 00000000 | 00000 |
| 7/8" | Yellow | Black | 221STBYPX | 1-4/0 | 0.29"-0.46" | LabelShop, LabelWorks, LabelWorks PX | 0.02" | 8 | -60° to 220° | 0000000 | 00000 |
Brother Label Printer Tape
Make custom labels with your Brother P-Touch printer. As it prints, this tape is laminated in plastic to seal out moisture and prevent smudging.
| Wd. | Color | Message Color | Manufacturer Model No. | Thick. | Roll Lg., ft. | Material | Temp. Range, °F | Pkg. Qty. | Pkg. | |
For P-Touch Printers | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Adhesive Back | ||||||||||
| 1/2" | Yellow | Black | TZE631 | 0.006" | 26 | Plastic-Laminated Polyester Plastic | -20° to 390° | 1 | 0000000 | 000000 |
| 3/4" | Yellow | Black | TZE641 | 0.006" | 26 | Plastic-Laminated Polyester Plastic | -20° to 390° | 1 | 0000000 | 00000 |
| 1" | Yellow | Black | TZE651 | 0.006" | 26 | Plastic-Laminated Polyester Plastic | -20° to 390° | 1 | 0000000 | 00000 |
Brady BMP21 Label Printer Tape
Print on heat-shrink tubing and then slide it over wires that are open on one end. When heat is applied, the tubing conforms to the wire for a tight fit.
| Manufacturer Model Number | Wd. | Thick. | Roll Lg., ft. | Color | Message Color | Mount Type | Material | Temp. Range, °F | Each | |
| M21-250-595-YL | 1/4" | 0.004" | 21 | Yellow | Black | Adhesive Back | Vinyl Plastic | -40° to 180° | 0000000 | 000000 |
| M21-375-595-YL | 3/8" | 0.004" | 21 | Yellow | Black | Adhesive Back | Vinyl Plastic | -40° to 180° | 0000000 | 00000 |
| M21-500-595-YL | 1/2" | 0.004" | 21 | Yellow | Black | Adhesive Back | Vinyl Plastic | -40° to 180° | 0000000 | 00000 |
| M21-750-595-YL | 3/4" | 0.004" | 21 | Yellow | Black | Adhesive Back | Vinyl Plastic | -40° to 180° | 0000000 | 00000 |
| Manufacturer Model Number | Wd. | For Wire Gauge | For Wire OD | Thick. | Roll Lg., ft. | Color | Message Color | Mount Type | Material | Temp. Range, °F | Each | |
| M21-125-C-342-YL | 1/8" | 22-16 | 0.05"-0.11" | 0.02" | 7 | Yellow | Black | Wraparound | Polyolefin Plastic | -90° to 265° | 0000000 | 000000 |
| M21-187-C-342-YL | 3/16" | 20-10 | 0.06"-0.15" | 0.02" | 7 | Yellow | Black | Wraparound | Polyolefin Plastic | -90° to 265° | 0000000 | 00000 |
| M21-250-C-342-YL | 1/4" | 16-8 | 0.09"-0.22" | 0.025" | 7 | Yellow | Black | Wraparound | Polyolefin Plastic | -90° to 265° | 0000000 | 00000 |
| M21-375-C-342-YL | 3/8" | 12-4 | 0.13"-0.32" | 0.025" | 7 | Yellow | Black | Wraparound | Polyolefin Plastic | -90° to 265° | 0000000 | 00000 |
Brady M710 Label Printer Tape
Print on heat-shrink tubing and then slide it over wires that are open on one end. When heat is applied, the tubing conforms to the wire for a tight fit.
| Manufacturer Model Number | Wd. | Thick. | Roll Lg., ft. | Color | Mount Type | Material | Temp. Range, °F | Each | |
| M7C-500-595-YL | 1/2" | 0.004" | 50 | Yellow | Adhesive Back | Vinyl Plastic | -40° to 180° | 0000000 | 000000 |
| M7C-1000-595-YL | 1" | 0.004" | 50 | Yellow | Adhesive Back | Vinyl Plastic | -40° to 180° | 00000000 | 00000 |
| M7C-2000-595-YL | 2" | 0.004" | 50 | Yellow | Adhesive Back | Vinyl Plastic | -40° to 180° | 0000000 | 000000 |
For Wire | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Manufacturer Model Number | Wd. | Gauge | OD | Thick. | Roll Lg., ft. | Color | Mount Type | Material | Temp. Range, °F | Each | |
| M7-125-1-342-YL | 1" | 22-16 | 0.05"-0.11" | 0.02" | 8 | Yellow | Wraparound | Polyolefin Plastic | -65° to 275° | 00000000 | 000000 |
| M7-187-1-342-YL | 1" | 20-10 | 0.06"-0.15" | 0.02" | 8 | Yellow | Wraparound | Polyolefin Plastic | -65° to 275° | 00000000 | 00000 |
| M7-250-1-342-YL | 1" | 16-8 | 0.09"-0.22" | 0.025" | 8 | Yellow | Wraparound | Polyolefin Plastic | -65° to 275° | 00000000 | 00000 |
| M7-375-1-342-YL | 1" | 12-4 | 0.13"-0.32" | 0.025" | 8 | Yellow | Wraparound | Polyolefin Plastic | -65° to 275° | 0000000 | 000000 |
Brady M4/M5 Label Printer Tape
Create labels using your Brady M4 or M5 printer.
Aggressive adhesive sticks to nearly any surface, including concrete and other porous materials. It holds up in oily, dirty, or damp areas, and it stays put even with heavy use or regular cleaning. However, it’s more difficult to remove from surfaces than standard adhesives. Vinyl labels are UV resistant, so you can use them outdoors.
| Wd. | Color | Manufacturer Model No. | For Printer Series | Thick. | Roll Lg., ft. | Temp. Range, °F | Each | |
Aggressive Adhesive Back | ||||||||
|---|---|---|---|---|---|---|---|---|
Vinyl Plastic | ||||||||
| 1/4" | Yellow | M4C-250-595-YL-BK | M4, M5 | 0.004" | 25 | -40° to 180° | 0000000 | 000000 |
| 3/8" | Yellow | M4C-375-595-YL-BK | M4, M5 | 0.004" | 25 | -40° to 180° | 0000000 | 00000 |
| 1/2" | Yellow | M4C-500-595-YL-BK | M4, M5 | 0.004" | 25 | -40° to 180° | 0000000 | 00000 |
| 3/4" | Yellow | M4C-750-595-YL-BK | M4, M5 | 0.004" | 25 | -40° to 180° | 0000000 | 00000 |
| 1" | Yellow | M4C-1000-595-YL-BK | M4, M5 | 0.004" | 25 | -40° to 180° | 0000000 | 00000 |
| 1 1/2" | Yellow | M5C-1500-595-YL-BK | M5 | 0.004" | 25 | -40° to 180° | 0000000 | 00000 |
Dymo Rhino IND Label Printer Tape
Make labels using your Dymo Rhino printer. This tape has an aggressive adhesive that sticks to nearly any surface, including concrete and other porous materials. It holds up in oily, dirty, or damp areas, and it stays put even with heavy use or regular cleaning. However, it’s more difficult to remove from surfaces than standard adhesives.
Vinyl tape is UV resistant, so you can use it outdoors.
| Wd. | Manufacturer Model Number | Thick. | Roll Lg., ft. | Color | Message Color | Mount Type | Performance | Temp. Range, °F | Each | |
Vinyl Plastic | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
For Dymo Rhino Series Printers | ||||||||||
| 1/2" | 18432 | 0.007" | 18 | Yellow | Black | Adhesive Back | Aggressive Adhesion | -40° to 140° | 0000000 | 000000 |
| 3/4" | 18433 | 0.007" | 18 | Yellow | Black | Adhesive Back | Aggressive Adhesion | -40° to 140° | 0000000 | 00000 |
| 1" | 1805431 | 0.007" | 18 | Yellow | Black | Adhesive Back | Aggressive Adhesion | -40° to 140° | 0000000 | 00000 |
Dymo LabelManager D1 Label Printer Tape
Create labels using your Dymo LabelManager or LabelWriter printer.
| Wd. | Manufacturer Model Number | Thick. | Roll Lg., ft. | Color | Message Color | Temp. Range, °F | Each | |
Polyester Plastic with Adhesive Back | ||||||||
|---|---|---|---|---|---|---|---|---|
For LabelManager and LabelWriter Series Printers | ||||||||
| 1/2" | 45018 | 0.005" | 23 | Yellow | Black | 0° to 190° | 00000000 | 000000 |
Dymo LetraTag LT Label Printer Tape
Create custom labels with your Dymo LetraTag printer.
| Color | Message Color | Manufacturer Model Number | Wd. | Thick. | Roll Lg., ft. | Mount Type | Material | Temp. Range, °F | Each | |
For LetraTag Series Printers | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Yellow | Black | 91332 | 1/2" | 0.006" | 13 | Adhesive Back | Polyester Plastic | 0° to 175° | 00000000 | 000000 |
Dymo Label Printer Tape for Wire and Cable
Create labels for wire and cable with your LabelManager, Rhino, or XTL printer.
Slide heat-shrink tubing tape over the cut end of a wire or cable, then apply heat for a snug fit.
For Wire | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Wd. | Color | Message Color | Manufacturer Model Number | Gauge | OD | Thick. | Roll Lg., ft. | Temp. Range, °F | Material | Each | |
For Dymo Rhino Series Printers | |||||||||||
Continuous Heat-Shrink Tubing | |||||||||||
| 1/4" | Yellow | Black | 18052 | 16-7 | 0.05"-0.15" | 0.02" | 5 | -65° to 255° | Polyolefin Plastic | 0000000 | 000000 |
| 3/8" | Yellow | Black | 18054 | 12-4 | 0.08"-0.23" | 0.02" | 5 | -65° to 255° | Polyolefin Plastic | 0000000 | 00000 |
| 1/2" | Yellow | Black | 18056 | 10-1 | 0.1"-0.3" | 0.02" | 5 | -65° to 255° | Polyolefin Plastic | 0000000 | 00000 |
| 3/4" | Yellow | Black | 18058 | 6-4/0 | 0.16"-0.48" | 0.02" | 5 | -65° to 255° | Polyolefin Plastic | 0000000 | 00000 |