Brady M4 Label Printer Tape

Filter by

For Printer Model

For Wire Gauge

Mount Type

Manufacturer Series

Wire Marker Type

Manufacturer Model Number

Message Type

Label Printer Tape Type

Color

Width

Appearance

Message Color

Thickness

Shape

For Printer Series

Minimum Temperature

Maximum Temperature

Visibility

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

REACH

RoHS

Printer Type

Message

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

Roll Length

36 Products

Brady Label Printer Tape for Wire and Cable

Make labels for wire and cable with your Brady M-series printer.

Continuous Heat-Shrink Tubing

Slide heat-shrink tubing tape over the cut end of a wire or cable, then apply heat for a snug fit.

Flame Retardant—Flame-retardant tape meets BS and EN standards for preventing the spread of flames and toxic gas. It also meets ASTM E662 standards for low smoke output.

				For Wire
	Wd.	Color	Message Color	Ga.	OD	Mfr. Model No.	Thk.	Roll Lg., ft.	Mount Type	Temp. Range, ° F	Specs. Met		Each
For Brady M4 and M5 Series Printers







				Polyolefin—Flame Retardant, Zero Halogen

				1"	White	Black	8 to 4	0.19" to 0.32"	M4C-375-7641	0.03"	6	Wraparound	-20 to 220	ASTM E662, BS 6853, EN 45545	5317N44	000000


				1"	White	Black	20 to 16	0.06" to 0.11"	M4C-125-7641	0.025"	6	Wraparound	-20 to 220	ASTM E662, BS 6853, EN 45545	5317N41	00000
				1"	White	Black	16 to 10	0.09" to 0.15"	M4C-187-7641	0.028"	6	Wraparound	-20 to 220	ASTM E662, BS 6853, EN 45545	5317N42	00000
				1"	White	Black	12 to 8	0.12" to 0.21"	M4C-250-7641	0.031"	6	Wraparound	-20 to 220	ASTM E662, BS 6853, EN 45545	5317N43	00000

Pre-Cut Heat-Shrink Tubing

Slide heat-shrink tubing tape over the cut end of a wire or cable, then apply heat for a snug fit.

					For Wire
	Wd.	Lg.	Color	Message Color	Ga.	OD	Mfr. Model No.	Thk.	Roll Lg., ft.	No. of Labels per Roll	Mount Type	Temp. Range, ° F		Each
For Brady M4 and M5 Series Printers







				Polyolefin

				3/4"	1/4"	White	Black	22 to 16	0.05" to 0.11"	M4-125-075-342	0.02"	5	80	Wraparound	-60 to 275	5317N14	000000


				3/4"	3/8"	White	Black	20 to 10	0.06" to 0.15"	M4-187-075-342	0.02"	5	80	Wraparound	-60 to 275	5317N13	00000
				3/4"	1/2"	White	Black	16 to 8	0.09" to 0.22"	M4-250-075-342	0.025"	5	80	Wraparound	-60 to 275	5317N15	00000
				3/4"	5/8"	White	Black	12 to 4	0.13" to 0.32"	M4-375-075-342	0.025"	5	80	Wraparound	-60 to 275	5317N16	000000

Continuous Wire and Cable Wrap

Vinyl Plastic—Vinyl tape is UV-resistant, so you can use it outdoors. It has a clear flap that you can smooth over your message to seal out moisture and prevent smudging.

				For Wire
	Wd.	Color	Message Color	Ga.	OD	Mfr. Model No.	Thk.	Roll Lg., ft.	Mount Type	Temp. Range, ° F		Each
For Brady M4 and M5 Series Printers







				Vinyl Plastic with Clear Flap

				3/4"	White	Black	20 to 8	0.11" to 0.17"	M4C-750-427	0.004"	25	Adhesive Back, Wraparound	-40 to 155	5317N25	000000

Pre-Cut Wire and Cable Tags

Tapered Rectangle

Rectangular Flag

Image of Product. Front orientation. Label Printer Tape. Brady Label Printer Tape for Wire and Cable, Pre-Cut Wire and Cable Tags.

Tag tape hangs off your wire or cable like a flag, so it’s easy to spot the message. It has more room for text than wrap tape.

Tapered Rectangle—Tapered tags have a narrow end, so you don’t have to carefully line up the edges. They’re easier to apply than rectangular tags—just wrap the tag around the wire or cable and press the ends together.

Rectangle—Rectangular tags can display a message on both sides. Wrap the narrow strip at the end around your wire or cable, then fold the two halves of the tag together.

Polyester Plastic—Polyester tape holds up to dirt, oil, and cleaning better than vinyl tape.

					For Wire
	Wd.	Lg.	Color	Message Color	Ga.	OD	Mfr. Model No.	Thk.	Roll Lg., ft.	No. of Labels per Roll	Mount Type	Temp. Range, ° F		Each
For Brady M4 and M5 Series Printers







				Tapered Rectangle—Polyester Plastic

				1"	2"	White	Black	16 to 10	0.12" to 0.2"	M4-214-483	0.004"	25	140	Wraparound	-40 to 245	5317N64	000000




						Rectangular Flags—Polypropylene

						1 3/16"	13/16"	White	Black	16 to 10	0.12" to 0.2"	M4-1-425-FP	0.005"	20	120	Wraparound	-90 to 175	5317N65	00000

Continuous Hook and Loop Tape

Hook and loop tape has hooks on the back, so you can stick it to loop strips. It’s often used to label cable ties holding wire bundles in place.

Polyester Plastic—Polyester tape holds up to dirt, oil, and cleaning better than vinyl tape.

	Mfr. Model No.	Thk.	Roll Lg., ft.	Mount Type	Temp. Range, ° F		Each
For Brady M4 and M5 Series Printers







	Polyester Plastic

	1/4"	White	Black	M4C-250-414	0.015"	12	Hook and Loop, Wraparound	-40 to 120	5317N55	000000


	1/2"	White	Black	M4C-500-414	0.015"	12	Hook and Loop, Wraparound	-40 to 120	5317N56	00000
	3/4"	White	Black	M4C-750-414	0.015"	12	Hook and Loop, Wraparound	-40 to 120	5317N57	00000

Brady M4/M5 Label Printer Tape

Create labels using your Brady M4 or M5 printer.

Aggressive Adhesion—Aggressive adhesive sticks to nearly any surface, including concrete and other porous materials. It holds up in oily, dirty, or damp areas, and it stays put even with heavy use or regular cleaning. However, it’s more difficult to remove from surfaces than standard adhesives.

Low Residue—Low-residue adhesive doesn’t leave a mess behind when you remove the tape, so cleanup is easy. It’s best for temporarily labeling items, since it won’t stand up to heavy wear.

Paper—Paper labels dissolve completely in water—including the adhesive—so you can wash them off. Use them on items that are frequently cleaned and relabeled, such as test tubes or food service containers.

Vinyl Plastic—Vinyl labels are UV resistant, so you can use them outdoors.

Polyester Plastic—Polyester labels hold up to dirt, oil, and cleaning better than vinyl.

	For Printer Series	Thk.	Roll Lg., ft.	Temp. Range, ° F		Each
Aggressive Adhesion Adhesive Back







	Vinyl Plastic

	1/4"	White	M4C-250-595-WT-BK	M4, M5	0.004"	25	-40 to 180	8493N11	000000


	1/4"	Yellow	M4C-250-595-YL-BK	M4, M5	0.004"	25	-40 to 180	8493N12	00000
	3/8"	White	M4C-375-595-WT-BK	M4, M5	0.004"	25	-40 to 180	8493N13	00000
	3/8"	Yellow	M4C-375-595-YL-BK	M4, M5	0.004"	25	-40 to 180	8493N14	00000
	1/2"	White	M4C-500-595-WT-BK	M4, M5	0.004"	25	-40 to 180	8493N15	00000
	1/2"	Yellow	M4C-500-595-YL-BK	M4, M5	0.004"	25	-40 to 180	8493N16	00000
	3/4"	White	M4C-750-595-WT-BK	M4, M5	0.004"	25	-40 to 180	8493N17	00000
	3/4"	Yellow	M4C-750-595-YL-BK	M4, M5	0.004"	25	-40 to 180	8493N18	00000
	1"	White	M4C-1000-595-WT-BK	M4, M5	0.004"	25	-40 to 180	8493N19	00000
	1"	Yellow	M4C-1000-595-YL-BK	M4, M5	0.004"	25	-40 to 180	8493N21	00000




			Polyester Plastic

			3/8"	White	M4C-375-422	M4, M5	0.004"	25	-40 to 210	8493N24	00000


			1/2"	White	M4C-500-422	M4, M5	0.004"	25	-40 to 210	8493N25	00000
			5/8"	White	M4C-625-422	M4, M5	0.004"	25	-40 to 210	8493N26	00000
			1"	White	M4C-1000-422	M4, M5	0.004"	25	-40 to 210	8493N27	00000


			Low Residue Adhesive Back







							Vinyl Plastic

							1"	White	M4C-1000-581-WT	M4, M5	0.005"	25	-40 to 180	8493N29	00000


							Water-Soluble Adhesive Back







											Paper

											3/4"	White	M4C-750-403	M4, M5	0.003"	25	-90 to 210	8493N32	00000

Brady Ultra-Low-Temperature Label Printer Tape

Create labels that withstand the coldest temperatures using your Brady M-series printer. Often used in labs, this printer tape also holds up to direct contact with liquid nitrogen and isopropyl alcohol. The aggressive adhesive sticks to smooth surfaces better than standard adhesives. It stays put in oily, dirty, or damp areas, and holds up to periodic cleanings. However, it’s difficult to remove from surfaces.

For Brady M4 and M5 Series Printers

Clear Flap—Tape with a clear flap protects your message from moisture and prevents smudging. Smooth the flap over the label.

Zero Halogen—Zero halogen tape is free of chlorides and other halogens, so it’s safe to use on metals that can crack under stress, such as stainless steel and titanium.

	Color	Message Color	Mfr. Model No.	Thk.	Roll Lg., ft.	Mount Type	Temp. Range, ° F		Each
Polypropylene



	1"	White	Black	M4C-1000-7425	0.004"	25	Adhesive Back	-110 to 155	8461N14	000000


	Polyester Plastic with Clear Flap—Zero Halogen



			3/8"	White	Black	M4C-375-461	0.002"	25	Adhesive Back	-320 to 230	8461N19	00000


			1/2"	White	Black	M4C-500-461	0.002"	25	Adhesive Back	-320 to 230	8461N21	00000

Brady Label Printer Tape for Terminal Blocks


	For Brady M4 and M5 Series Printers

Make custom labels for circuits with your Brady M-series printer. This printer tape is sized to fit the narrow surfaces on common terminal blocks. It also has notches to set individual terminals apart.

Low Residue—Tape with low-residue adhesive doesn’t leave a mess behind when you remove it, so cleanup is easy. It’s best for temporarily labeling items, since it won’t stand up to heavy wear. Made of vinyl, this tape is UV resistant and can be used outdoors.

	Mfr. Model No.	Thk.	Roll Lg., ft.	Temp. Range, ° F		Each
For Brady M4 and M5 Series Printers







	Vinyl Fabric with Low Residue Adhesive Back

	1/4"	White	Black	M4C-240-498	0.0073"	16	-40 to 175	8473N11	000000


	5/16"	White	Black	M4C-318-498	0.0073"	16	-40 to 175	8473N12	00000
	3/8"	White	Black	M4C-375-498	0.0073"	16	-40 to 175	8473N13	00000