Create a barrier between you and your clean room. These coats keep dust, microbes, and other pollutants that might be on your body from contaminating the area. Reusable when washed according to clean room standards, they’ll last up to 100 washes. Make sure to wash them before your first wear. They are suitable for use in clean rooms rated to both Federal Standard and ISO classes. In both systems, clean rooms with lower class ratings have fewer contaminants. Coats are knee length.

When choosing a size, consider your body shape and the clothes you’ll wear underneath.

Wear once then toss—these disposable coats prevent dust, microbes, and other pollutants from contaminating your clean room space. Cleaned and individually bagged in a clean room, they won’t shed any lint or dust. These coats are polyethylene/Tyvek, which is made with heat- and pressure-bonded fibers that make for a soft yet tear-resistant coat. They hold up to limited contact with nonhazardous liquids, such as water and paint spray.

When choosing a size, consider individual body shape and clothing worn underneath.

Made of 99% polyester and 1% carbon fiber, these coats repel liquids. These knee-length coats are also known as barrier coats. They have knit cuffs to keep liquid from splashing into sleeves.

When measuring chest size, measure around the fullest part of your chest. Take all measurements over clothing you expect to wear under the coat.

These coats meet NFPA 70E standards for protection against electrical arc flashes for personal protection equipment (PPE) category 2. They also meet NFPA 2112 standards for protection against flash fire. Check the PPE category and minimum arc rating provided for your workplace, and then select all required clothing and personal protective equipment to meet the minimum arc rating. Arc rating measures a garment’s ability to insulate the wearer from burns; the higher the arc rating, the greater the flame resistance. These coats are made of breathable cotton and are self-extinguishing. They have a flap in the front that conceals the snaps.

When measuring chest size, measure around the fullest part of your chest. Take all measurements over any clothing you expect to wear under these coats.

Keep workers clean and protected from spills and splashes on food processing lines while reducing the risk of contaminating the food. These aprons contain metal and chemical additives that will set off metal detectors and show up on X-ray machines if they—or any piece of them—fall into your line. Use these aprons to help you comply with Hazard Analysis and Critical Control Point (HACCP) programs for food safety.

Protect sensitive equipment from damage and malfunction—these coats quickly drain static electricity. Surface resistivity of unlaundered fabric is 10⁶ ohms. These coats are made of a durable cotton/polyester blend to protect against wear and abrasion in workshops and labs. They have snaps down the front and adjustable snaps on the cuffs. Cuff snaps may also be attached to a grounding point. They are knee length with one chest pocket and two waist pockets.

When measuring chest size, measure around the fullest part of your chest. Take all measurements over clothing you expect to wear under the coat.

Protect sensitive equipment from damage and malfunction—these jackets quickly divert static electricity. Surface resistivity of unlaundered fabric is 10⁶ ohms. These jackets are made of a durable cotton/polyester blend to protect against wear and abrasion in workshops and labs. They have snaps down the front and adjustable snaps on the cuffs. Cuff snaps may also be attached to a grounding point. Jackets cover your hips and have one chest pocket and two waist pockets.

When measuring chest size, measure around the fullest part of your chest. Take all measurements over clothing you expect to wear under the jacket.

Smocks wrap around the front and tie on the side. They are made of a durable cotton/polyester blend to protect against dirt, wear, and abrasion in workshops and labs. They are knee length and have open cuffs, one chest pocket, and two waist pockets. Hip slits provide access to pants pockets.

When measuring chest size, measure around the fullest part of your chest. Take all measurements over clothing you expect to wear under the smock.

Designed to meet clean room standards, these aprons prevent pollutants from contaminating the space. Aprons resist spills and splashes from acids, alkalies, and other chemicals.

Prevent static electricity on your clothes from damaging sensitive equipment. With a carbon fiber fabric woven in, these shirts dissipate static. They're made primarily of polyester, so they easily slip over other PPE clothing.

When measuring chest size, measure around the fullest part of your chest. Take all measurements over any clothing you expect to wear under these shirts.