ANSI/ALI Standard Ladder Cages

Filter by

Overall Height

Ladder Height

Color

Component

Step Shape

Cage Depth

Height

Material

Ladder Width

Finish

Maximum Climbing Height

Specifications Met

Step Tread

Number of Steps

Ladder Type

Cage Width

Overall Height with Cage

Assembly

RoHS

Foldable

REACH

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

Export Control Classification Number (ECCN)

EAR99

DFARS Specialty Metals

Exempt

Mounting Hardware Included

Yes

Forward

How can we improve?

48 Products

Ladder Cages

Feel secure on tall ladders. These cages surround the ladder to help reduce the risk of falls. Made of powder-coated steel, they resist rust, so you can use them outdoors. Each section is fully welded and mounts to the side rails of stationary ladders. They don’t mount to walls or other cages. For a complete assembly, you’ll need at least one middle/top section and one bottom section.

Bottom Sections—Bottom sections are flared to give you room to enter or exit your cage.

Middle/Top Sections—Middle/top sections make your cage longer. They can also act as a top section when your ladder system includes a hatch.

Walk-Through Sections—Walk-through sections are required when you can step through the top of your ladder onto a landing. They should extend 42" above the top rung.

Yellow—Yellow cages stand out in busy areas.

Specifications Met—Note: Ladder cages meet OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.

		Cage		Flared Cage							Gray		Yellow
	Overall Ht., ft.	Wd.	Dp.	Wd.	Dp.	For Ladder Wd.	Max. Ladder Rail Dp.	Wt., lb.	Mounting Hardware Included	Specs. Met		Each		Each
Powder-Coated Steel







				Bottom Sections

				2	38"	34"	38"	38"	16" to 20"	2"	47	Yes	OSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 3277, ANSI-ASC A14.3	8271T22	0000000	8271T24	0000000


				3	38"	34"	38"	38"	16" to 20"	2"	54	Yes	OSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 3277, ANSI-ASC A14.3	8271T23	000000	8271T25	000000
				4	38"	34"	38"	38"	16" to 20"	2"	71	Yes	OSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 3277, ANSI-ASC A14.3	8271T21	000000	8271T29	000000




						Middle/Top Sections

						2	30"	30"	—	—	16" to 20"	2"	55	Yes	OSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 3277, ANSI-ASC A14.3	8271T14	000000	8271T26	000000


						3	30"	30"	—	—	16" to 20"	2"	61	Yes	OSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 3277, ANSI-ASC A14.3	8271T16	000000	8271T27	000000
						4	30"	30"	—	—	16" to 20"	2"	68	Yes	OSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 3277, ANSI-ASC A14.3	8271T18	000000	8271T28	000000
						7	30"	30"	—	—	16" to 20"	2"	110	Yes	OSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 3277, ANSI-ASC A14.3	8271T12	000000	8271T32	000000




								Walk-Through Sections

								5	30"	30"	—	—	16" to 20"	2"	85	Yes	OSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 3277, ANSI-ASC A14.3	8271T11	000000	8271T31	000000

Wall-Mount Ladders with Cage


	Ladder with Security Cover (Sold Separately)

Ladder and cage come unassembled for mounting flexibility and lower freight costs. The cage surrounds the ladder to help reduce the risk of falls and make you feel secure—especially when climbing tall ladders. Made of galvanized steel, these ladders hold up outdoors. Knurled treads have good slip resistance. The cage starts between 7 and 8 ft. from the ground and extends beyond the top rung by 42" with a walk-through exit.

Note: Ladders meet OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.

		Ladder			Cage		Flared Cage				Step			Mounting Holes
	Max. Climbing Ht.	Ht., ft.	Wd.	Overall Ht. with Cage	Wd.	Dp.	Wd.	Dp.	Wt., lb.	No. of Steps	Shape	Tread	Mounting Hardware Included	No. of	Lg.	Wd.	No. of Mounting Brackets	Assembly	Foldable	Specs. Met		Each
Galvanized Steel







				300 lb. Capacity

				126"	11	19 1/2"	169"	27"	28 1/2"	35"	32 1/2"	180	11	Round	Knurled	No	12	3/4"	3/8"	2	Unassembled	No	ANSI-ASC A14.3, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053	8140T68	000000000


				138"	12	19 1/2"	181"	27"	28 1/2"	35"	32 1/2"	185	12	Round	Knurled	No	12	3/4"	3/8"	2	Unassembled	No	ANSI-ASC A14.3, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053	8140T59	00000000
				150"	13	19 1/2"	193"	27"	28 1/2"	35"	32 1/2"	195	13	Round	Knurled	No	12	3/4"	3/8"	2	Unassembled	No	ANSI-ASC A14.3, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053	8140T69	00000000
				162"	14	19 1/2"	205"	27"	28 1/2"	35"	32 1/2"	210	14	Round	Knurled	No	16	3/4"	3/8"	2	Unassembled	No	ANSI-ASC A14.3, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053	8140T52	00000000
				174"	15	19 1/2"	217"	27"	28 1/2"	35"	32 1/2"	220	15	Round	Knurled	No	16	3/4"	3/8"	2	Unassembled	No	ANSI-ASC A14.3, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053	8140T67	00000000
				186"	16	19 1/2"	229"	27"	28 1/2"	35"	32 1/2"	230	16	Round	Knurled	No	16	3/4"	3/8"	2	Unassembled	No	ANSI-ASC A14.3, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053	8140T53	00000000
				198"	17	19 1/2"	241"	27"	28 1/2"	35"	32 1/2"	235	17	Round	Knurled	No	16	3/4"	3/8"	2	Unassembled	No	ANSI-ASC A14.3, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053	8140T71	00000000
				210"	18	19 1/2"	253"	27"	28 1/2"	35"	32 1/2"	250	18	Round	Knurled	No	20	3/4"	3/8"	2	Unassembled	No	ANSI-ASC A14.3, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053	8140T54	00000000
				222"	19	19 1/2"	265"	27"	28 1/2"	35"	32 1/2"	265	19	Round	Knurled	No	20	3/4"	3/8"	2	Unassembled	No	ANSI-ASC A14.3, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053	8140T55	00000000
				246"	21	19 1/2"	289"	27"	28 1/2"	35"	32 1/2"	280	21	Round	Knurled	No	20	3/4"	3/8"	2	Unassembled	No	ANSI-ASC A14.3, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053	8140T66	00000000
				270"	23	19 1/2"	313"	27"	28 1/2"	35"	32 1/2"	300	23	Round	Knurled	No	20	3/4"	3/8"	2	Unassembled	No	ANSI-ASC A14.3, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053	8140T56	00000000


				294"	25	19 1/2"	337"	27"	28 1/2"	35"	32 1/2"	315	25	Round	Knurled	No	20	3/4"	3/8"	2	Unassembled	No	ANSI-ASC A14.3, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053	8140T72	00000000
				318"	27	19 1/2"	361"	27"	28 1/2"	35"	32 1/2"	340	27	Round	Knurled	No	24	3/4"	3/8"	2	Unassembled	No	ANSI-ASC A14.3, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053	8140T57	00000000
				342"	29	19 1/2"	385"	27"	28 1/2"	35"	32 1/2"	360	29	Round	Knurled	No	24	3/4"	3/8"	2	Unassembled	No	ANSI-ASC A14.3, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053	8140T58	00000000
				354"	30	19 1/2"	397"	27"	28 1/2"	35"	32 1/2"	380	30	Round	Knurled	No	24	3/4"	3/8"	2	Unassembled	No	ANSI-ASC A14.3, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053	8140T86	00000000

Accessories and Replacements for Ladders

Security Cover—A security cover prevents unauthorized access. It blocks five rungs—hook it over the highest rung you want to cover, then secure it at the bottom with the hasp and a padlock (not included).

		Each
Security Cover	8140T78	0000000
Replacement Twirl Nut Fastener	8140T12	0000
Replacement Vertical Stringer for Cage	8140T11	00000

Wall-Mount Ladders with Welded-On Cage

A cage is welded to these ladders for quick installation. The cage helps you feel secure on tall ladders—it surrounds the ladder to help reduce the risk of falls. Made of powder-coated steel, these ladders resist rust, so you can use them outdoors. Ribbed treads give you good slip resistance. These ladders come in sections no longer than 7ʹ for easy handling. Bolt sections together end to end with the included fasteners. The cage starts 7ʹ above the bottom of the ladder and extends beyond the top rung by 42".

Note: Ladders and safety gates meet OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.

		Ladder			Cage		Flared Cage							Mounting Holes
	Max. Climbing Ht.	Ht.	Wd.	Overall Ht. with Cage	Wd.	Dp.	Wd.	Dp.	Wt., lb.	No. of Steps	Step Tread	Projection	Mounting Hardware Included	No. of	Dia.	No. of Mounting Brackets	Specs. Met		Each
Gray Powder-Coated Steel







				300 lb. Capacity

				145"	147"	20"	187 1/2"	30"	27"	36 1/2"	30"	260	13	Ribbed	7"	No	10	9/16"	10	ANSI-ASC A14.3, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.29	80265T21	000000000


				193"	195"	20"	235 1/2"	30"	27"	36 1/2"	30"	350	17	Ribbed	7"	No	14	9/16"	14	ANSI-ASC A14.3, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.29	80265T25	00000000
				241"	243"	20"	283 1/2"	30"	27"	36 1/2"	30"	430	21	Ribbed	7"	No	14	9/16"	14	ANSI-ASC A14.3, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.29	80265T29	00000000
				289"	291"	20"	331 1/2"	30"	27"	36 1/2"	30"	520	25	Ribbed	7"	No	18	9/16"	18	ANSI-ASC A14.3, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.29	80265T34	00000000
				325"	327"	20"	367 1/2"	30"	27"	36 1/2"	30"	575	28	Ribbed	7"	No	18	9/16"	18	ANSI-ASC A14.3, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.29	80265T37	00000000

Accessories for Ladders

Ladder Security Covers

Security covers prevent unauthorized access. They can be welded or bolted on (holes must be drilled) to open from the right side.

	Wd.	Wt., lb.	Features	Max. Padlock Shackle Dia.	Mounting Hardware Included		Each
Gray Powder-Coated Steel



	6	20 7/8"	41	Padlockable Hasp	13/32"	Yes	79745T36	0000000

Ladder Safety Gates

Safety gates prevent you from falling into the cage at the top of the ladder. A spring pulls the gate closed after someone passes through. Mount them to the cage’s handrail using the included hardware.

	Wd.	Wt., lb.	Mounting Hardware Included	Specs. Met		Each
Yellow Powder-Coated Steel



	21 5/8"	24" to 40"	24	Yes	ANSI/ASSP A1264.1, OSHA Compliant 29 CFR 1910 Subpart D	80265T111	0000000

Enclosed Platform Step Ladders


Adjustable Height	Fixed Height

Unlike standard platform step ladders, these ladders have guardrails on all sides of the platform, allowing you to safely work with both hands while facing any direction. They are faster to set up and quicker to transport than other enclosed platforms, such as scaffolds and lifts. The gates only open in one direction, making it easy to step onto the platform while ensuring they stay closed during work. All ladders have nonconductive fiberglass rails and nonskid feet. They also have outriggers to create a wide base for added stability. Fold these ladders for compact storage and easy transport; tilt to roll them on their wheels.

Note: The number of steps listed includes the platform.

Note: Ladders meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe operating practices. Ladders also meet CAL-OSHA standards, which is required for use in California.

Adjustable—Adjustable ladders slide up and down in 12" increments by unlocking the lever on each rail. Each rail also has a telescoping foot that adjusts independently for use on uneven surfaces.

Type IA—Type 1A ladders are tested to hold up to 300 lbs.

Type IAA—Type 1AA ladders are tested to hold up to 375 lbs.

ANSI-ASC A14.5—ANSI-ASC A14.5 certifies dimensional and performance requirements for fiberglass ladders.

	Overall				Platform								Step
	Ht. (A)	Wd. (B)	Dp. (C)	Maximum Climbing Height (D)	Wd. (E)	Dp. (F)	Material	Tread	Wt. Cap., lb.	Ladder Duty Rating	Wt., lb.	No. of Steps	Material	Tread	Wheel Configuration	Specs. Met		Each
Fiberglass Rail







				Fixed—With Outriggers

				76"	35"	47"	44"	21"	18"	Aluminum	Ribbed	375	Type IAA	54	4	Aluminum	Ribbed	Four Rigid Casters and Two Swivel Casters	ANSI-ASC A14.5, Cal/OSHA Compliant Title 8 Section 3276, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.29, OSHA Compliant 29 CFR 1926.1053, OSHA Compliant 29 CFR 1926.451, OSHA Compliant 29 CFR 1926.452, OSHA Compliant 29 CFR 1926.502	3688N24	000000000


				99"	38"	61"	67"	21"	18"	Aluminum	Ribbed	375	Type IAA	65	6	Aluminum	Ribbed	Four Rigid Casters and Two Swivel Casters	ANSI-ASC A14.5, Cal/OSHA Compliant Title 8 Section 3276, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.29, OSHA Compliant 29 CFR 1926.1053, OSHA Compliant 29 CFR 1926.451, OSHA Compliant 29 CFR 1926.452, OSHA Compliant 29 CFR 1926.502	3688N25	00000000
				122"	41"	75"	89"	21"	18"	Aluminum	Ribbed	375	Type IAA	69	8	Aluminum	Ribbed	Four Rigid Casters and Two Swivel Casters	ANSI-ASC A14.5, Cal/OSHA Compliant Title 8 Section 3276, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.29, OSHA Compliant 29 CFR 1926.1053, OSHA Compliant 29 CFR 1926.451, OSHA Compliant 29 CFR 1926.452, OSHA Compliant 29 CFR 1926.502	3688N26	00000000
				12 ft.	44"	89"	112"	21"	18"	Aluminum	Ribbed	300	Type IA	81	10	Aluminum	Ribbed	Four Rigid Casters and Two Swivel Casters	ANSI-ASC A14.5, Cal/OSHA Compliant Title 8 Section 3276, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.29, OSHA Compliant 29 CFR 1926.1053, OSHA Compliant 29 CFR 1926.451, OSHA Compliant 29 CFR 1926.452, OSHA Compliant 29 CFR 1926.502	3688N27	00000000




						Adjustable—With Outriggers

						80" to 104"	46"	44" to 58"	59"	22"	18"	Aluminum	Ribbed	375	Type IAA	80	4	Aluminum	Ribbed	Two Rigid Casters and Four Swivel Casters	ANSI-ASC A14.5, Cal/OSHA Compliant Title 8 Section 3276, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.29, OSHA Compliant 29 CFR 1926.1053, OSHA Compliant 29 CFR 1926.451, OSHA Compliant 29 CFR 1926.452, OSHA Compliant 29 CFR 1926.502	3688N11	00000000


						104" to 152"	46" to 83"	57" to 91"	105"	22"	18"	Aluminum	Ribbed	375	Type IAA	95	8	Aluminum	Ribbed	Two Rigid Casters and Four Swivel Casters	ANSI-ASC A14.5, Cal/OSHA Compliant Title 8 Section 3276, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.29, OSHA Compliant 29 CFR 1926.1053, OSHA Compliant 29 CFR 1926.451, OSHA Compliant 29 CFR 1926.452, OSHA Compliant 29 CFR 1926.502	3688N12	00000000
						140" to 212"	46" to 83"	79" to 121"	161"	22"	18"	Aluminum	Ribbed	375	Type IAA	120	14	Aluminum	Ribbed	Two Rigid Casters and Four Swivel Casters	ANSI-ASC A14.5, Cal/OSHA Compliant Title 8 Section 3276, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.29, OSHA Compliant 29 CFR 1926.1053, OSHA Compliant 29 CFR 1926.451, OSHA Compliant 29 CFR 1926.452, OSHA Compliant 29 CFR 1926.502	3688N13	00000000