Ladder and cage come unassembled for mounting flexibility and lower freight costs. Cages start between 7 and 8 feet from the ground and extend beyond the top rung by 42" with a walk-through exit. OSHA requires a cage when the distance from the floor to the top rung is more than 20 feet.

Optional security cover prevents unauthorized access. It covers five rungs and is secured by two hooks at the top and a U-clamp at the bottom.

Note: Ladders meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices.

OSHA requires a ladder cage when ladder heights are greater than 20 feet from the floor to the top rung. Each section is fully welded and mounts to the side rails of stationary ladders (not to walls or other cages) that have an overall width of 16" to 20". OSHA requires cages to start between 7 and 8 feet from the ground.

Bottom sections flare out for entry and exit.

Middle/top sections extend the length of the cage or can act as a top section for hatch opening use.

Walk-through sections are required for walk-through applications and should extend 42" above the top rung.

Note: At least one middle/top section and one bottom section are required for a complete assembly.

Note: Cages meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices.

Add safety and convenience to your wall and tank ladders. Posts extend above the ladder top and lock in place to guide you and provide stability. A release lever lets you lower the post when it's not in use. Mount to the top two rungs of your ladder.

Add these rails to straight ladders and extension ladders to provide a safe transition to an elevated surface. The grab posts have grip tape to keep your hands from slipping. Quickly install these rails by sliding them over the ladder’s side rails, locking them into place over the top rung, and tightening the thumb screws.

Add an optional safety gate to prevent falls through the rail opening. Push the gate open to step onto the elevated surface; a self-closing mechanism automatically closes it. Before using the gate, secure the ladder to a fixed structure with a ladder anchor.

Note: Per OSHA regulations, the rails must rise at least three feet above the elevated surface being accessed.

Replace worn out shoes on straight and extension ladders.

Replace worn out shoes on step ladders.