Standoffs for Ladders


Keep your distance and your balance—these standoffs hold your ladder away from walls, so you have more room to work. Because their contact points are wider than your ladder’s, they distribute weight more evenly to prevent sideways tipping. These standoffs also span windows and other fragile surfaces, so you can work in front of them without causing damage. Protective tips help prevent scuffs and scrapes. Use them on flat surfaces.
Adjustable standoffs allow you to change the distance between your ladder and the supporting surface in 2" increments.
Quick-release standoffs don’t require tools. They attach to your ladder with a spring-loaded locking latch, so you can install them faster than those that use U-bolts.
Note: Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
Manufacturer | Manufacturer Model No. | Adjustability | For Rail Material | Material | Wd. | Dp. | Adjustment Increments | Features | Each | |
Werner | AC96 | Fixed | Aluminum | Aluminum | 47" | 10" | __ | Nonmarring Tips | 00000000 | 000000 |
Werner | AC78 | Fixed | Aluminum, Fiberglass | Aluminum | 44" | 10" | __ | Nonmarring Tips, Quick Release | 00000000 | 00000 |
Louisville | LP-2200-00 | Fixed | Aluminum, Fiberglass | Aluminum | 48" | 12" | __ | Nonmarring Tips | 0000000 | 00000 |
Louisville | LP-2210-00 | Adjustable | Aluminum, Fiberglass | Aluminum | 48" | 13"-25" | 2" | Nonmarring Tips | 0000000 | 000000 |
Roof Hooks for Ladders

Roll your ladder to a roof's peak, then flip it over and the steel hooks hold it in place. Fits round and D-rung steps.
Material | Wheel Configuration | Pair | |
Steel | Two Rigid Casters | 0000000 | 000000 |
Stabilizing Anchors for Ladders


Secure your ladder to a fixed structure to keep it stable.
Style A cinch the ladder to any diameter pole, such as electrical and telephone poles. Pull the straps through the buckles to quickly tighten them for a secure hold.
Style B anchor the ladder to the eave of a roof. Clamp the bracket to the roof eave, clip the included hook and loop strap to the bracket, and wrap the strap around a ladder rung to pull it tight.
Levelers for Ladders


Keep your ladder level even when the surface isn’t. These levelers adjust one side of your ladder by up to 10". A foot lock allows for hands-free operation. They work with most Type 1, 1A, and 1AA fiberglass and aluminum extension, straight, and step ladders.
Levelers with a stabilizing arm help prevent side tipping, especially when you’re working on slopes. The arm folds out to widen the stance of your ladder by about 16".
Note: Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
Ht. | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For Ladder Type | For Rail Material | For Capacity, lbs. | Material | Retracted | Extended | Adjustment Increments | Features | Specifications Met | Each | |
Levelers | ||||||||||
Extension, Step, Straight | Aluminum, Fiberglass | 250, 300, 375 | Aluminum | 19 1/2" | 29 1/2" | 3/16" | Foot Lock, Swivel Shoe | Cal/OSHA Compliant Title 8 Section 3276, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053, ANSI A14.5 | 0000000 | 0000000 |
Levelers with Stabilizing Arm | ||||||||||
Extension, Step, Straight | Aluminum, Fiberglass | 250, 300, 375 | Aluminum | 19 1/2" | 29 1/2" | 3/16" | Foot Lock, Stabilizing Arm, Swivel Shoe | Cal/OSHA Compliant Title 8 Section 3276, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053, ANSI A14.5 | 00000000 | 000000 |
Cable Hooks for Ladders

Attach these hooks to keep your ladder stable on cable and wire rope.
For Rail Material | Material | Pair | |
Fiberglass | Aluminum | 00000000 | 000000 |
Shoes for Straight and Extension Ladders
Replace worn out shoes on straight and extension ladders.

For Rail Material | Manufacturer/Brand Model Number | Number of Shoes Included | Mounting Hardware Included | Each | |
Louisville | |||||
---|---|---|---|---|---|
Aluminum, Fiberglass | PK130L | 2 | Yes | 0000000 | 000000 |
Aluminum, Fiberglass | PK137 | 2 | Yes | 0000000 | 00000 |
Werner | |||||
Aluminum | 26-1 | 2 | Yes | 0000000 | 00000 |
Aluminum | 26-2 | 2 | Yes | 0000000 | 00000 |
Fiberglass | 26-3 | 2 | Yes | 0000000 | 00000 |
Fiberglass | 26-5 | 2 | Yes | 0000000 | 00000 |

For Rail | |||||
---|---|---|---|---|---|
Wd. | Dp. | Number of Shoes Included | Mounting Hardware Included | Each | |
Galvanized Steel | |||||
1 3/8" | 3" | 2 | Yes | 000000 | 000000 |
Rail Caps for Ladders

Protect supporting surfaces from damage.
For Rail | ||||
---|---|---|---|---|
Wd. | Dp. | Material | Pair | |
1"-1 1/4" | 3"-3 1/4" | Plastic | 0000000 | 000000 |
Shoes for Step Ladders
Replace worn out shoes on step ladders.

Manufacturer Model Number | Number of Shoes Included | Mounting Hardware Included | Each | |
Louisville | ||||
---|---|---|---|---|
PK130B | 4 | Yes | 0000000 | 000000 |
Strut Channel Standoffs


Mount strut channel away from walls. Made from zinc-plated steel, these standoffs resist corrosion in wet environments.