Telescoping Multifunction Ladders
These ladders have movable sections that extend and collapse into one another so you can adjust them to the height you need. Configure them into step ladders, straight ladders, stairwell ladders, or scaffolding stands. When used as scaffolding stands, 12" wide planks (not included) must be placed 3 feet from the ladder base.
Aluminum ladders are lighter than fiberglass, making them easier to move between work areas. ANSI A14.2 certifies dimensional and performance requirements for aluminum ladders.
Fiberglass ladders are nonconductive for use in electrical work. ANSI A14.5 certifies dimensional and performance requirements for fiberglass ladders. Scaffold brackets (sold separately) are required to use these ladders as scaffolding stands.
Type 1A ladders are tested to hold up to 300 lbs. Type 1AA ladders are tested to hold up to 375 lbs.
Note: Ladders meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe operating practices. Per OSHA regulations, the ladder rails must rise at least three feet above the elevated surface being accessed when used as a straight ladder.
Step | ||||||||
|---|---|---|---|---|---|---|---|---|
| Overall Ht. (Ladder Configuration) | Overall Wd. | No. of Steps | Material | Tread | Wheel Configuration | Specifications Met | Each | |
Aluminum  | ||||||||
Type 1A (300-lb. Cap.) | ||||||||
| 6 ft.-11 ft. (Step), 13 ft.-23 ft. (Straight), 6 ft. (Scaffold) | 29" | 22 | Aluminum | Ribbed | Two Rigid Casters | ANSI A14.2, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053, OSHA Compliant 29 CFR 1926.451, OSHA Compliant 29 CFR 1926.452 | 0000000 | 0000000 |
Type 1AA (375-lb. Cap.) | ||||||||
| 4 ft.-7 ft. (Step), 8 ft.-14 ft. (Straight), 4 ft. (Scaffold) | 24" | 14 | Aluminum | Ribbed | __ | ANSI A14.2, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053, OSHA Compliant 29 CFR 1926.451, OSHA Compliant 29 CFR 1926.452 | 0000000 | 000000 |
| 5 ft.-9 ft. (Step), 10 ft.-18 ft. (Straight), 5 ft. (Scaffold) | 27" | 18 | Aluminum | Ribbed | __ | ANSI A14.2, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053, OSHA Compliant 29 CFR 1926.451, OSHA Compliant 29 CFR 1926.452 | 0000000 | 000000 |
Fiberglass | ||||||||
Type 1A (300-lb. Cap.) | ||||||||
| 3 ft.-5 ft. (Step), 6 ft.-10 ft. (Straight), 3 ft. (Scaffold) | 29" | 10 | Aluminum | Ribbed | Two Rigid Casters | ANSI A14.5, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053, OSHA Compliant 29 CFR 1926.451, OSHA Compliant 29 CFR 1926.452 | 0000000 | 000000 |
| 5 ft.-9 ft. (Step), 11 ft.-19 ft. (Straight), 5 ft. (Scaffold) | 29" | 18 | Aluminum | Ribbed | Two Rigid Casters | ANSI A14.5, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053, OSHA Compliant 29 CFR 1926.451, OSHA Compliant 29 CFR 1926.452 | 0000000 | 000000 |
| Scaffold Brackets for Fiberglass Ladders | 0000000 | Pair | 000000 |