Landscape Equipment Sharpeners

Filter by

For Sharpening

Awls

Chain Saw Chain Depth Gauges

Chain Saw Chain Teeth

Chisels

Gouges

Knives

Landscaping Equipment

Stone Shape

Grit Rating

REACH

Abrasive Material

Export Control Classification Number (ECCN)

Blade Edge

RoHS

Compliant with Exemptions

Thickness

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Power Source

DFARS Specialty Metals

Sharpening Angle

Material

Length

Sharpening Angle Adjustability

Lubrication

Height

Width

Voltage

Number of Pieces

Rotation Speed

Maximum Rotation Speed

Container Type

Overall Length

For Chain Saw Chain Cutter Type

80 Products

Dremel Rotary Tool Sharpeners


Guide for Straight Blades	Guide for Chain Saws

Pop sharpening bits into your Dremel-style grinder to hone chain saws, hoes, lawn mower blades, shovels, and more. Then screw the guide around the bit to ensure the bit sharpens at the exact angle you need.

No. of Pieces	Includes		Each
7	Four Aluminum Oxide Sharpening Bits with 1/8" Dia. Shank One Any-Angle Guide for Straight Blades One 30° Angle Guide for Straight Blades One 30° Angle Guide for Chain Saw Chains with 1/4", 0.325", 3/8", and 3/8" (Low Profile) Chain Pitch	4471A13	000000

Blade Sharpener Sets


	Shown in Use

A collection of stones for all your sharpening jobs, from repairing rough edges to adding razor-sharp finishes. A blade holder clamps around your knife to hold it steady as you sharpen. No need to eyeball the sharpening angle—hook the guide rod into the slots on the blade holder to position the stone at four angles. To quickly sharpen the other side of the blade edge, flip the holder over without unclamping the blade.

For Sharpening Knives

Aluminum Oxide Abrasive—For fine control over your finish, aluminum oxide abrades slowly. Use it on any blade material.

Ceramic Abrasive—For use after coarse sharpening, ceramic refines and polishes your blade’s edge. You can also use ceramic to touch up blades that are still somewhat sharp.

Diamond Abrasive—Our hardest abrasive. Diamond can sharpen any blade material, even hardened steel.

Lubrication—In addition to the included lubricant, you can add other water-soluble and oil-based lubricants.

	No. of Pieces	Includes	Sharpening Angle Adjustability	Sharpening Angle	Lubrication	Container Type		Each
For Straight Blade Edges



	Aluminum Oxide	8	Medium (120 Grit) Aluminum Oxide Stone Extra Fine (280 Grit) Aluminum Oxide Stone Ultra Fine (600 Grit) Aluminum Oxide Stone Blade Holder Three Angle Guide Rods Lubricant	Adjustable	17°, 20°, 25°, 30°	Required	Plastic Case	8678N12	000000


	Aluminum Oxide, Ceramic	12	Coarse (70 Grit) Aluminum Oxide Stone Medium (120 Grit) Aluminum Oxide Stone Extra Fine (280 Grit) Aluminum Oxide Stone Ultra Fine (600 Grit) Aluminum Oxide Stone Ultra Fine (1000 Grit) Ceramic Stone Blade Holder Five Angle Guide Rods Lubricant	Adjustable	17°, 20°, 25°, 30°	Required	Plastic Case	8678N11	00000
	Diamond	9	Coarse (70 Grit) Diamond Stone Medium (120 Grit) Diamond Stone Extra Fine (280 Grit) Diamond Stone Ultra Fine (600 Grit) Diamond Stone Blade Holder Four Angle Guide Rods	Adjustable	17°, 20°, 25°, 30°	Not Required	Plastic Case	8678N35	00000

Accessories and Replacements for Blade Sharpeners

Replacement and Optional Sharpening Stones

Aluminum Oxide Abrasive—For fine control over your finish, aluminum oxide abrades slowly. Use it on any blade material.

Novaculite Abrasive—Fine grains cut very slowly for the most control over your finish.

Diamond Abrasive—Our hardest abrasive. Diamond can sharpen any blade material, even hardened steel.

Ceramic Abrasive—For use after coarse sharpening, ceramic refines and polishes your blade’s edge. You can also use ceramic to touch up blades that are still somewhat sharp.

Silicon Carbide Abrasive—Silicon carbide cuts quickly with light pressure.

Leather Abrasive—For a polished finish after you’ve already sharpened with coarser abrasives, leather removes microscopic burs from blade edges. Also known as strops.

	Grit Rating	Lubrication		Each
For Straight Blade Edges



	Aluminum Oxide	Coarse (70 Grit)	Required	8678N16	00000


	Aluminum Oxide	Medium (120 Grit)	Required	8678N17	0000
	Aluminum Oxide	Extra Fine (280 Grit)	Required	8678N18	0000
	Aluminum Oxide	Ultra Fine (600 Grit)	Required	8678N19	0000
	Novaculite	Fine (220 Grit)	Required	8678N28	00000
	Novaculite	Super Fine (500 Grit)	Required	8678N29	00000
	Novaculite	Ultra Fine (1200 Grit)	Required	8678N27	00000
	Diamond	Coarse (70 Grit)	Not Required	8678N31	00000
	Diamond	Medium (120 Grit)	Not Required	8678N32	00000
	Diamond	Extra Fine (280 Grit)	Not Required	8678N33	00000
	Diamond	Ultra Fine (600 Grit)	Not Required	8678N34	00000


	Ceramic	Ultra Fine (1000 Grit)	Required	8678N13	00000
	Ceramic	Ultra Fine (2000 Grit)	Required	8678N14	00000
	Leather	—	Not Required	8678N15	00000


	For Serrated Blade Edges



			Ceramic	Ultra Fine (800 Grit)	Required	8678N25	00000


			Ceramic	Ultra Fine (1000 Grit)	Required	8678N26	00000


			For Curved Blade Edges



					Aluminum Oxide	Medium (120 Grit)	Required	8678N21	0000


					Aluminum Oxide	Extra Fine (280 Grit)	Required	8678N22	0000
					Silicon Carbide	Ultra Fine (600 Grit)	Required	8678N23	00000
					Silicon Carbide	Ultra Fine (1000 Grit)	Required	8678N24	00000

Blade Sharpener Bases

Set the blade holder on these bases for greater stability. You can leave them freestanding or mount them to your workbench.

				Mounting Holes
Base Dia.	Ht.	Material	Mount Type	No. of	Dia.	Fasteners Included		Each
4"	4"	Plastic	Rest On, Screw On	4	3/16"	No	8678N36	00000

Blade Sharpeners

Pass your knife or scissor blades over the abrasive stones to restore dull edges.

For Sharpening Knives

Shown in Use with Knife

Carbide Abrasive—For coarse sharpening, carbide aggressively removes material to form a new edge.

Ceramic Abrasive—For use after coarse sharpening, ceramic refines and polishes your blade’s edge. You can also use ceramic to touch up blades that are still somewhat sharp.

Reversible Sharpening Stones—Double the life of your sharpener. These abrasive stones have two sharpening surfaces, so you can flip them when one face becomes dull to reveal a fresh one.

Adjustment Dial—Turn the dial to switch between six different sharpening angles.

Sharpeners							Replacement Coarse-Grit Sharpening Stones		Replacement Fine-Grit Sharpening Stones
Abrasive Material (Grit Rating)	Lg.	Wd.	Ht.	Features		Each		Each		Each
For Straight Blade Knives—Carbide (Coarse Grit) with Fixed Sharpening Angle (25°) For Straight Blade Knives—Ceramic (Fine Grit) with Fixed Sharpening Angle (20°)	6"	3/4"	2 1/2"	Reversible Sharpening Stones	3663A121	000000	3663A122	00000	3663A123	00000
For Straight-Blade Knives—Carbide (Coarse Grit) with Adjustable Angle (14°, 16°, 18°, 20°, 22°, and 24°) For Straight-Blade Knives—Ceramic (Fine Grit) with Adjustable Angle (14°, 16°, 18°, 20°, 22°, and 24°) For Serrated-Blade Knives—Carbide (Coarse Grit) with Fixed Angle (23°)	10 3/4"	1 1/4"	2 3/4"	Adjustment Dial	3663A44	00000	———	0	———	0

For Sharpening Knives and Scissors


Shown in Use with Scissors	Shown in Use with Knife

Carbide Abrasive—For coarse sharpening, carbide aggressively removes material to form a new edge.

Ceramic Abrasive—For use after coarse sharpening, ceramic refines and polishes your blade’s edge. You can also use ceramic to touch up blades that are still somewhat sharp.

Abrasive Material (Grit Rating)	Lg.	Wd.	Ht.		Each
For Straight-Blade Knives—Carbide (Coarse Grit) with Fixed Angle (20°) For Straight-Blade Scissors—Ceramic (Fine Grit)	5 3/4"	3/4"	4 1/2"	3663A41	00000
For Straight-Blade Knives—Carbide (Coarse Grit) with Fixed Angle (20°) For Straight-Blade Knives—Ceramic (Fine Grit) with Fixed Angle (23°) For Straight-Blade Scissors—Ceramic (Fine Grit)	7 1/2"	1"	3"	3663A43	00000

Cordless Blade Sharpeners

For quick sharpening anywhere, these tools run on a rechargeable battery. Press your blade against the rotating abrasive belt for a razor-sharp edge. All include a guide that slides to four different angles—you can remove it to make space for larger blades. There's also a slot for manually sharpening both straight and serrated blades.

For Sharpening Knives

Aluminum Oxide Abrasive—For fine control over your finish, aluminum oxide abrades slowly. Use it on any blade material.

Floating Back Plates—These plates keep the abrasive belt tensioned as you apply pressure while sharpening your blade.

	Sanding Belt			Slot
	Abrasive Material (Grit Rating)	Sharpening Angle Adjustability	Sharpening Angle	Abrasive Material (Grit Rating)	Sharpening Angle Adjustability	Sharpening Angle	Max. Rotation Speed, rpm	Voltage, V DC	Battery Cap., A·h	Lg.	Wd.	Ht.	Features	Battery Charger Included	Includes		Each
For Straight and Serrated Blade Edges



		Aluminum Oxide (Coarse) Aluminum Oxide (Medium) Aluminum Oxide (Fine)	Adjustable	15°, 20°, 25°, 30°	Ceramic (Fine)	Fixed	65°	4,200	7.2	1.5	8"	4 3/4"	5"	Adjustment Slider Floating Back Plates	Yes	Nine Sanding Belts (Three of Each Grit) Tool Bag	45605A12	0000000

Replacement Sanding Belts

		Each
Three Aluminum Oxide (Coarse, Medium, Fine) Belts	8676N14	00000
Three Aluminum Oxide (Coarse) Belts	8676N13	0000
Three Aluminum Oxide (Medium) Belts	8676N11	0000
Three Aluminum Oxide (Fine) Belts	8676N12	0000

Electric Blade Sharpeners

Make your blade as sharp as the day you bought it with minimal effort. These sharpeners have preset angle guides to make sure your blade strikes the abrasive at the correct angle—every time.

For Sharpening Knives


	Removable Sharpening Unit

Draw your knife through each of the three slots—there’s no need to swap out belts to change abrasive levels. Two slots have diamond abrasive wheels for sharpening: one with a coarse abrasive and one with a medium abrasive. The final slot has a leather wheel for polishing your blade to a razor-sharp finish.

Diamond Abrasive—Our hardest abrasive. Diamond can sharpen any blade material, even hardened steel.

Leather Abrasive—For a polished finish after you’ve already sharpened with coarser abrasives, leather removes microscopic burs from blade edges. Also known as strops.

Removable Sharpening Unit—Detach the sharpening unit to manually clean and sanitize the slots. You can also place it in a commercial dishwasher for hassle-free cleaning.

	Sharpeners												Replacement Sharpening Unit
	Abrasive Material (Grit Rating)	Sharpening Angle Adjustability	Sharpening Angle	Max. Rotation Speed, rpm	Voltage, V AC	Current, amp	Lg.	Wd.	Ht.	Features		Each		Each
For Straight and Serrated Blade Edges



		Diamond (Coarse) Diamond (Medium) Leather	Fixed	20°	3,900	120	1	10"	4 1/4"	4 1/4"	—	45605A82	0000000	———	0


		Diamond (Coarse) Diamond (Medium) Leather	Fixed	20°	3,900	120	1.4	12 1/4"	5"	5"	Removable Sharpening Unit	45605A85	000000	45605A95	0000000

For Sharpening Knives and Scissors


Shown in Use with Scissors	Shown in Use with Knife

Hold knife and scissor blades against the rotating belt on these sharpeners. Swap out sanding belts each time you need a different grit.

Aluminum Oxide Abrasive—For fine control over your finish, aluminum oxide abrades slowly. Use it on any blade material.

Floating Back Plates—These plates keep the abrasive belt tensioned as you apply pressure while sharpening your blade.

	Sharpening Angle Adjustability	Sharpening Angle	For Handedness	Max. Rotation Speed, rpm	Voltage, V AC	Current, amp	Lg.	Wd.	Ht.	Features	Includes		Each
For Straight Blade Edges



	Aluminum Oxide (Coarse) Aluminum Oxide (Medium) Aluminum Oxide (Fine)	Fixed	20°	Right, Left	4,200	120	0.6	8 1/2"	5"	5 3/4"	Floating Back Plates	Three Sanding Belts (One of Each Grit)	45605A88	000000

Replacement Sanding Belts

		Each
Three Aluminum Oxide (Coarse, Medium, Fine) Belts	8676N14	00000
Three Aluminum Oxide (Coarse) Belts	8676N13	0000
Three Aluminum Oxide (Medium) Belts	8676N11	0000
Three Aluminum Oxide (Fine) Belts	8676N12	0000

Pocket-Size Blade Sharpeners

Slip into your pocket or attach to a lanyard for sharpening on the go. Pass knife blades over the abrasive stones to restore dull edges.

For Sharpening Knives


2 Slots	2 Slots and 2 Stones

4 Slots and 1 Stone

Carbide Abrasive—For coarse sharpening, carbide aggressively removes material to form a new edge.

Diamond Abrasive—Our hardest abrasive. Diamond can sharpen any blade material, even hardened steel.

Tungsten Steel Abrasive—An affordable option that's great for touch-ups on somewhat sharp blades. Since it's softer than carbide, tungsten steel removes less material than carbide for more control. However, this also means it dulls more quickly.

Ceramic Abrasive—For use after coarse sharpening, ceramic refines and polishes your blade’s edge. You can also use ceramic to touch up blades that are still somewhat sharp.

Slots		Stones
No. of	Abrasive Material (Grit Rating)	No. of	Abrasive Material (Grit Rating)	Lg.	Wd.	Ht.		Each
2	For Straight-Blade Knives—Tungsten Steel (Coarse Grit) with Fixed Angle (24°) For Straight-Blade Knives—Ceramic (Fine Grit) with Fixed Angle (22°)	—	—	3"	1/2"	2 1/4"	8669N14	00000
2	For Straight-Blade Knives—Carbide (Coarse Grit) with Fixed Angle (22.5°) For Straight-Blade Knives—Ceramic (Fine Grit) with Fixed Angle (22.5°)	2	For Straight- and Serrated-Blade Knives—Tapered Round Diamond (Medium Grit) For Straight- and Serrated-Blade Knives—Rectangle Ceramic (Fine Grit)	4"	1/2"	1 1/4"	8669N11	00000
4	For Straight-Blade Knives—Carbide (Coarse Grit) with Fixed Angle (17°) For Straight-Blade Knives—Carbide (Coarse Grit) with Fixed Angle (20°) For Straight-Blade Knives—Carbide (Coarse Grit) with Fixed Angle (25°) For Straight-Blade Knives—Carbide (Coarse Grit) with Fixed Angle (30°)	1	For Straight- and Serrated-Blade Knives—Rectangle Ceramic (Fine Grit)	4 1/4"	1/2"	1 1/2"	8669N12	00000
4	For Straight-Blade Knives—Diamond (Medium Grit) with Fixed Angle (17°) For Straight-Blade Knives—Diamond (Medium Grit) with Fixed Angle (20°) For Straight-Blade Knives—Diamond (Medium Grit) with Fixed Angle (25°) For Straight-Blade Knives—Diamond (Medium Grit) with Fixed Angle (30°)	1	For Straight- and Serrated-Blade Knives—Rectangle Ceramic (Fine Grit)	4 1/4"	1/2"	1 1/2"	8669N13	00000

Sharpener Wheels for Electric Chain Saw Sharpeners

Pair these wheels with electric chain saw sharpeners to sharpen your chain’s teeth and set cut depth.

For Sharpening Chain Saw Chain Teeth


	Chain Saw

For Chain Saw Chain
Cutter Type	Pitch (Profile)	Dia.	Thk.	Arbor Hole Dia.	Max. Rotation Speed, rpm		Each



	Full Chisel, Semi Chisel	1/4", 0.325", 3/8" (Low)	5 3/4"	1/8"	7/8"	4,600	8801N11	000000


	Full Chisel, Semi Chisel	0.325", 3/8", 0.404"	5 3/4"	3/16"	7/8"	4,600	8801N12	00000

For Sharpening Chain Saw Chain Depth Gauges


	Chain Saw

Dia.	Thk.	Arbor Hole Dia.	Max. Rotation Speed, rpm		Each



0.018" to 0.030"	5 3/4"	1/4"	7/8"	4,600	8801N13	000000

Adjustable-Angle Electric Scissors Sharpeners

Clamp and position scissors for razor-sharp edges with minimal effort. These tools have an adjustable arm that angles blades against the rotating wheels. One wheel sharpens, and the other buffs away burrs to leave a polished edge. Sharpeners work with straight and zigzag blades (also known as pinking shears) up to 14" long. Clean the abrasive wheel with included dressing stick.

Aluminum Oxide Abrasive—For fine control over your finish, aluminum oxide abrades slowly. Use it on any blade material.

	Sharpening Wheel		Buffing Wheel
	Abrasive Material (Grit Rating)	Wheel Dia.	Abrasive Material (Grit Rating)	Wheel Dia.	Sharpening Angle Adjustability	Sharpening Angle	For Handedness	Max. Rotation Speed, rpm	Voltage, V AC	Current, amp	Lg.	Wd.	Ht.	Features	Includes		Each
For Straight and Zigzag Blade Edges



		Aluminum Oxide (Coarse)	5"	Silicon Carbide (Fine)	5"	Adjustable	0° to 55°	Right, Left	3,450	120	3.5	9 1/2"	6 1/2"	8"	Adjustable Arm Eye Shields Finger Guards Wheel Guards	Dressing Stick Lubricant Safety Glasses	4515A11	0000000

Replacements for Blade Sharpeners

		Each
Replacement Aluminum Oxide (Coarse Grit) Sharpening Wheel	4515A22	000000
Replacement Silicon Carbide (Fine Grit) Buffing Wheel	4515A23	00000

Blade Balancers

Confirm your rotary blades are balanced for smooth, vibration-free cutting. These balancers are often used after your blade hits something or is sharpened. Originally designed for lawn mower blades, you can use them with any high-speed rotary blade, such as circular saw and rotary tool blades, with a center hole. To inspect, simply place a blade onto the pointed spindle. If your blade tilts to one side, it’s not balanced.

For Hole Dia.	Base Dia.	Overall Ht.	Material		Each
3/8" to 1 1/2"	2 3/8"	2"	Zinc-Plated Aluminum	8644N11	00000

Electric Chain Saw Sharpeners


		Chain Saw

Sharpen your chain saws with precision and minimal effort. For fast, consistent results, clamp the chain in the self-centering vise to automatically position each tooth under the high-speed grinding wheel. Sharpen a tooth, then slide the chain forward to repeat. The included dressing stick cleans the wheel before sharpening, and the sharpener guide helps set the correct angle. They come with three sharpening wheels: two for different chain pitches and one for depth gauges.

For Chain							Overall
Pitch (Profile)	Cutter Type	For Cutting Depth	Sharpening Angle	Max. Rotation Speed, rpm	Voltage, V AC	Current, amp	Lg.	Wd.	Ht.	Mounting Location	Certification	Features	Includes		Each
1/4", 0.325", 3/8", 0.404", 3/8" (Low)	Full Chisel, Semi Chisel	0.018" to 0.030"	0° to 35°	3,150	120	1.8	13 1/4"	9 1/4"	17 1/4"	Bench, Vise, Wall	C-UL Listed, UL Listed	LED Light, Self-Centering Vise	Three Sharpener Wheels Sharpener Guide Dressing Stick	8704N11	0000000

Replacement Chain Saw Sharpener Wheels

		Each
For Chain Teeth—0.250", 0.325", and 0.375" (Low Profile) Chain Pitch	8801N11	000000
For Chain Teeth—0.325", 0.375", and 0.404" Chain Pitch	8801N12	00000
For Depth Gauge—0.018" to 0.030" Cutting Dp.	8801N13	00000

Water-Cooled Electric Blade Sharpeners

Run at high speeds to breeze through sharpening jobs with precision. The sharpening wheel spins through a cooling water bath, so high-speed cutting won’t burn, bend, or weaken your blade edge. The water also washes away debris and traps airborne dust particles to keep the wheel abrasive and your workspace clean. Secure the included jig for chisels and planes into the support arm. Make precise adjustments to lock in your sharpening angle for consistent, accurate cuts every time. Additional jigs (sold separately) help you sharpen scissors, drill bits, axes, and more. Made of cast components, these sharpeners are built to last.

When you need finer or coarser cuts, the wheel dresser grades the wheel down to a 1000 grit surface and roughs it back up to a 220 grit surface. Stop anywhere in between for an intermediate grit. The dresser only removes a tiny amount of material, so it won’t shorten the life of the wheel. If the wheel becomes uneven over time, return it to shape with the truing tool.

The leather wheel perfects your edge by removing burs left from the aluminum oxide wheel. Soften the leather with honing oil and honing compound before using it on your blade.

Aluminum Oxide Abrasive—For fine control over your finish, aluminum oxide abrades slowly. Use it on any blade material.

	Sharpening Wheel		Buffing Wheel
	Abrasive Material (Grit Rating)	Wheel Dia.	Abrasive Material (Grit Rating)	Wheel Dia.	Sharpening Angle Adjustability	Sharpening Angle	Max. Rotation Speed, rpm	Voltage, V AC	Current, amp	Lg.	Wd.	Ht.	Wt., lb.	Includes		Each
For Straight, Serrated, Pointed, Fluted, and Curved Blade Edges



		Aluminum Oxide (Coarse)	10"	Leather	8 1/2"	Adjustable	10° to 90°	150	120	1.7	10 3/4"	10 3/4"	13"	33	Water Reservoir Chisel and Plane Jig—For 3" Max. Blade Wd. Angle Guide Coarse/Fine Wheel Dresser Edge Marker Truing Tool Honing Oil Honing Compound Storage Tray Support Arm	9179N121	000000000

Accessories and Replacements for Blade Sharpeners

		Each
Replacement Aluminum Oxide (Coarse Grit) Sharpening Wheel—10" Dia. × 1 15/16" Thk.	9179N132	0000000
Replacement Leather Buffing Wheel—8 1/2" Dia. × 1 1/8" Thk.	9179N133	000000
Replacement Coarse/Fine Wheel Dresser	9179N136	00000
Replacement Truing Tool	9179N135	000000
Replacement Water Reservoir	9179N137	00000
Rotating Blade Sharpener Base	9179N134	00000
Replacement Chisel and Plane Jig—For 3" Max. Blade Wd.	9179N126	000000
Scissor Jig	9179N128	00000
Drill Bit Jig—For 1/8" to 7/8" Drill Bits	9179N124	000000
Axe Jig	9179N127	00000
Knife Jig—For 2 3/8" to 15" Blade Lg. (For 25/64" Max. Blade Thk.)	9179N122	00000
Short-Blade Knife Jig—For 1" to 5" Blade Lg. (For 25/64" Max. Blade Thk.)	9179N129	00000
Long-Blade Knife Jig—For 3/8" to 15" Blade Lg. (For 25/64" Max. Blade Thk.)	9179N123	00000
Plane Jig—For Any Blade Wd.	9179N131	000000
Gouge Jig—For Curved Blades	9179N125	000000

Sharpening Guides


2 Sharpening Angles	4 Sharpening Angles


2 Sharpening Angles	4 Sharpening Angles

Strike your sharpening stone with your blade at the correct angle for a razor-sharp edge—every time. These guides include multiple angle options. Use a lower angle for a sharper blade and a higher angle for a more durable blade.

2 Sharpening Angles—A wooden base holds the included sharpening stones at two different angles. Draw your blade down either stone to sharpen.

4 Sharpening Angles—A magnetic base secures these guides directly to your sharpening stone. The four-sided base offers four different sharpening angles. Press your blade against the guide as you strike the stone to maintain the angle.

No. of Sharpening Angles	Sharpening Angle	Wd.	Lg.	Ht.	For Blade Edge	Material	Mount Type	Features	Includes		Each
2	20°, 25°	2"	6"	1"	Straight	Wood	Rest On	Storage for Four Stones	Two Straight Round 600-Grit (Polished) Ceramic Alumina Stones—5/16" Dia. × 5" Lg. Two Straight Round 1000-Grit (Polished) Ceramic Alumina Stones—5/16" Dia. × 5" Lg.	8642N11	000000
4	15°, 20°, 22°, 26°	2 5/8"	4 3/8"	1/8"	Straight	Plastic	Magnetic	—	—	8642N12	0000

Chain Saw Sharpeners


		Chain Saw

Faster and more consistent than files alone, these tools sharpen all the surfaces of your chain in one swift motion. Two round files shape the teeth, while a joint file sets the depth gauge for proper cut depth. Flip the tool to switch between right and left teeth. The two-handed design gives you better control and comfort than standard files.

Chain Saw Sharpeners											Replacement Round Files
For Chain
Pitch (Profile)	Cutter Type	Round File Dia.	For Cutting Depth	Sharpening Angle	File Lg.	Overall Lg.	Handle Material	Container Type		Each		Each
0.325"	Full Chisel, Semi Chisel	3/16"	0.025"	30°	8"	12 1/4"	Plastic	Plastic Pouch	8680N13	000000	4246A1	00000
0.404"	Full Chisel, Semi Chisel	7/32"	0.030"	30°	8"	12 1/4"	Plastic	Plastic Pouch	8680N15	00000	4246A2	0000
1/4" (Low)	Full Chisel, Semi Chisel	1/8"	0.018"	30°	8"	12 1/4"	Plastic	Plastic Pouch	8680N11	00000	4246A112	0000
3/8"	Full Chisel, Semi Chisel	13/64"	0.025"	30°	8"	12 1/4"	Plastic	Plastic Pouch	8680N14	00000	4246A113	0000
3/8" (Low)	Full Chisel, Semi Chisel	5/32"	0.025"	30°	8"	12 1/4"	Plastic	Plastic Pouch	8680N12	00000	4246A114	0000