Electrical Arc-Flash-Resistant Quick-Stop Retracting Fall-Arrest Lanyards
Made with a durable Kevlar webbing, these lanyards meet ASTM F887, so they're tested to hold up against arc flash hazards. They extend and retract as you move around, but with a sudden jerk, such as a fall, they immediately lock like a seat belt to stop you. They stop your fall within inches, unlike shock-absorbing lanyards that extend several feet. A built-in shock absorber reduces the jolt of the stop. When used together with a harness and anchor, these lanyards help you meet OSHA and ANSI safety standards.
Use Class 1 lanyards when your anchor is at the same level as or above your D-ring.
Class 2 lanyards are more versatile than Class 1 lanyards—use them when your anchor is above your D-ring, at the same level, or up to 5 ft. below. They meet safety standards to prevent fraying or breaking if you fall near a sharp edge.
Harness End Connection | Anchor End Connection | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg., ft. | Material | Construction | Type | Material | Type | Material | Carabiner Opening Wd. | Snap Hook Opening Size | Housing Material | Capacity, lbs. | Specifications Met | Each | |
Class 1 | |||||||||||||
1 Anchor End Connection | |||||||||||||
| 6 | Kevlar | Webbing | Snap Hook | Steel | Carabiner with Swivel Eye | Steel | 1" | 13/16" | Plastic | 310 | ASTM F887, ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1926.502 | 0000000 | 0000000 |
Class 2 | |||||||||||||
1 Anchor End Connection | |||||||||||||
| 8 | Kevlar | Webbing | Pin Retainer | Aluminum | Snap Hook | Steel | __ | 13/16" | Plastic | 420 | ASTM F887, ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1926.502 | 0000000 | 000000 |
Quick-Stop Retracting Fall-Arrest Lanyards with Anchor
2 Anchor End
Connections
2 Anchor End
Connections
Clip these lanyards onto a rated structure—they form their own anchor. They extend and retract as you move around, but with a sudden jerk, such as a fall, they immediately lock like a seat belt to stop you. They stop your fall within inches, unlike shock-absorbing lanyards that extend several feet. A built-in shock absorber reduces the jolt of the stop. Used together with a harness, they help you meet OSHA and ANSI safety standards.
Class 2 lanyards are more versatile than Class 1 lanyards. Use them when the anchor is above, level with, or up to 5 ft. below your D-ring. Since they're made with Kevlar webbing or wire rope, they meet safety standards to prevent fraying or breaking if you fall near a sharp edge.
Hook-over lanyards have a large snap hook, also known as a rebar snap hook, that attaches directly to a scaffold, beam, or other structure. Wraparound lanyards loop over large structures, such as I-beams, and attach to themselves.
Lanyards with 1 anchor end connection are best when you’re working in a single location. Lanyards with 2 anchor end connections let you move between anchors while staying tethered. Attach the new anchor point before disconnecting the previous one.
Webbing lanyards are flexible and lightweight, so they won't weigh you down.
Harness End Connection | Anchor End Connection | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg., ft. | Material | Construction | Type | Material | Type | Material | Snap Hook Opening Size | Housing Material | Capacity, lbs. | Specifications Met | Features | Each | |
Class 2—Hook Over | |||||||||||||
1 Anchor End Connection | |||||||||||||
| 8 | Kevlar | Webbing | Pin Retainer | Aluminum | Snap Hook | Steel | 2 1/2" | Plastic | 420 | ANSI Z359.14, OSHA Compliant 29 CFR 1926.502 | Lightweight Aluminum Hardware, UV Resistant | 00000000 | 0000000 |
2 Anchor End Connections | |||||||||||||
| 8 | Kevlar | Webbing | Pin Retainer | Aluminum | Snap Hook/Snap Hook | Steel | 2 1/2" | Plastic | 420 | ANSI Z359.14, OSHA Compliant 29 CFR 1926.502 | Lightweight Aluminum Hardware, UV Resistant | 00000000 | 000000 |
Class 2—Wraparound | |||||||||||||
1 Anchor End Connection | |||||||||||||
| 8 | Kevlar | Webbing | Pin Retainer | Aluminum | Snap Hook | Steel | 1" | Plastic | 420 | ANSI Z359.14, OSHA Compliant 29 CFR 1926.502 | Lightweight Aluminum Hardware, UV Resistant | 00000000 | 000000 |
2 Anchor End Connections | |||||||||||||
| 8 | Kevlar | Webbing | Pin Retainer | Aluminum | Snap Hook/Snap Hook | Steel | 1" | Plastic | 420 | ANSI Z359.14, OSHA Compliant 29 CFR 1926.502 | Lightweight Aluminum Hardware, UV Resistant | 00000000 | 000000 |
D-Ring Extension Straps
Add length to your harness D-ring and make it easier to attach a fall-arrest lanyard.
Webbing loops are more lightweight than snap hooks. They wrap securely around your D-ring.
Kevlar straps are tested to meet ASTM F887 standards for jobs where there is a risk of exposure to electric arcs and flames. Since they’re Kevlar, they won’t melt or drip if exposed to flash fires.
| Lg. | Material | Capacity, lbs. | Specifications Met | Each | |
D-Ring × Webbing Loop | |||||
|---|---|---|---|---|---|
Webbing Construction | |||||
| 18" | Kevlar | 420 | ASTM F887, OSHA Compliant 29 CFR 1926.502, ANSI/ASSP Z359.11 | 00000000 | 000000 |
Leg Support Straps
Ease pressure on your legs and keep blood flowing—these straps help prevent injury while you’re waiting for rescue after a fall. They come tucked in a pouch that you loop onto your harness. If you fall, pull them out and hook them under your feet.
Nomex straps are tested to meet ASTM F887 standards for jobs where there is a risk of exposure to electric arcs and flames. They won't ignite, melt or drip if exposed to flash fires.
End Connection Type | ||||||
|---|---|---|---|---|---|---|
| Material | Support | Harness | Capacity, lbs. | Specifications Met | Each | |
| Nomex | Loop, Hook | Snap | 420 | ASTM F887 | 00000000 | 000000 |
Heat-Resistant Fall-Arrest Harnesses
Made of inherently flame-resistant Kevlar, these harnesses withstand temperatures up to 800° F. They keep you safe when you’re working at height where heat and sparks could weaken your harness. The D-ring on the back keeps you upright if you fall. When used properly with a lanyard and an anchor, these harnesses help you meet OSHA and ANSI safety standards.
Indicator stitching at impact points pops or tears during a fall, so you’ll know at a glance if the harness has been weakened by stress. When you’re not using your lanyard, clip it into one of the holders so it doesn’t drag or get caught.
| Harness Size | For Height | For Weight, lbs. | Waist Size | Harness Material | D-Ring Location (No. of) | Max. Temperature, °F | Capacity, lbs. | Specifications Met | Features | Each | |
Front-Buckle Harness—Slide Thigh Buckle | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| S | 4'10"-6'0" | 100-160 | 32" to 40" | Kevlar | Back (1) | 800° | 420 | ANSI/ASSP Z359.11, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502 | Impact-Indicating Stitching, Lanyard Holders | 00000000 | 0000000 |
| M/L | 5'0"-6'2" | 140-280 | 36" to 48" | Kevlar | Back (1) | 800° | 420 | ANSI/ASSP Z359.11, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502 | Impact-Indicating Stitching, Lanyard Holders | 00000000 | 000000 |
| XL | 5'2"-6'6" | 200-330 | 44" to 52" | Kevlar | Back (1) | 800° | 420 | ANSI/ASSP Z359.11, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502 | Impact-Indicating Stitching, Lanyard Holders | 00000000 | 000000 |
Electrical Arc-Flash-Resistant Fall-Arrest Harnesses
Made with Nomex or Kevlar, these harnesses withstand high heat and electrical arcs that could weaken a standard harness. They meet ASTM F887, so they're tested to hold up against arc flash hazards. Attach the D-ring on the back to a lanyard, and these harnesses will keep you upright if you fall. When used together with a lanyard and anchor, these harnesses help you meet OSHA and ANSI safety standards.
Impact indicator stitching is designed to tear during a fall, so it’s easy to tell if a harness is still safe to use. If you have an unused lanyard, clip it to one of the lanyard holders to keep it from dragging or catching on nearby equipment.
Style A don’t have padding, so they’re less bulky than Style B. However, they may chafe if worn for long periods. They have squeeze-release thigh buckles, which connect and disconnect more quickly than slide buckles and don’t need to be adjusted each time you put them on.
Style B have padding on the back and shoulders for all-day comfort. Each leg strap has a handle on the back so you can pull yourself into a seated position if you fall. This relieves pressure on your legs and keeps blood flowing while you wait for rescue.
| Style | Harness Size | For Height | For Weight, lbs. | Waist Size | Harness Material | D-Ring Location (No. of) | Capacity, lbs. | Specifications Met | Features | Each | |
Harnesses | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Front-Buckle Harness—Squeeze-Release Thigh Buckle | |||||||||||
| A | One Size | 4'10"-6'5" | 100-310 | 34" to 51" | Nomex/Kevlar | Back (1) | 420 | ASTM F887, ANSI/ASSP Z359.11, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502 | Impact-Indicating Stitching, Lanyard Holders | 000000 | 0000000 |
Harnesses with Back and Shoulder Padding | |||||||||||
Front-Buckle Harness—Slide Thigh Buckle | |||||||||||
| B | S | 4’10”-5’10” | 110-170 | 24" to 32" | Kevlar | Back (1) | 420 | ASTM F887, ANSI/ASSP Z359.11, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502 | Impact-Indicating Stitching, Lanyard Holders, Leg Support Handles | 00000000 | 000000 |
| B | M/L | 5'0"-6'2" | 140-240 | 32" to 48" | Kevlar | Back (1) | 420 | ASTM F887, ANSI/ASSP Z359.11, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502 | Impact-Indicating Stitching, Lanyard Holders, Leg Support Handles | 00000000 | 000000 |
| B | XL | 5'2"-6'6" | 210-320 | 36" to 52" | Kevlar | Back (1) | 420 | ASTM F887, ANSI/ASSP Z359.11, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502 | Impact-Indicating Stitching, Lanyard Holders, Leg Support Handles | 00000000 | 000000 |
| B | 2XL | 5'6"-6'10" | 230-420 | 45" to 57" | Kevlar | Back (1) | 420 | ASTM F887, ANSI/ASSP Z359.11, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502 | Impact-Indicating Stitching, Lanyard Holders, Leg Support Handles | 00000000 | 000000 |
Electrical Arc-Flash-Resistant Fall-Arrest
Harnesses for Climbing and Positioning
Our most versatile harness for tasks at height in areas with arc-flash and fire hazards—these harnesses have a D-ring on the back, chest, and each hip. Made with Nomex and Kevlar, they’re tested to ASTM F887 for arc-flash protection. Attach a lanyard to the D-ring on the back, and these harnesses will keep you upright if you fall. The chest D-ring lets you clip into ladder-climbing systems without the line getting in your way as you climb. Hip D-rings let you tether yourself close to your work, so your hands are free for tools and equipment. When used together with an anchor and a lanyard, these harnesses help you meet OSHA and ANSI safety standards.
If you have an unused lanyard, park it on one of the lanyard holders to keep it from dragging or catching on nearby equipment. Indicator stitching is designed to tear during a fall or impact, so it’s easy to tell if a harness is still safe to use.
| Harness Size | For Height | For Weight, lbs. | Waist Size | Harness Material | D-Ring Location (No. of) | Capacity, lbs. | Specifications Met | Features | Each | |
Front-Buckle Harness—Slide Thigh Buckle | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| S | 4'10"-6'5" | 100-310 | 34" to 43" | Nomex/Kevlar | Back (1), Chest (1), Hips (2) | 420 | ASTM F887, ANSI/ASSP Z359.11, OSHA Compliant 29 CFR 1926.502 | Impact-Indicating Stitching, Lanyard Holders | 0000000 | 0000000 |
| M | 4'10"-6'5" | 100-310 | 38" to 47" | Nomex/Kevlar | Back (1), Chest (1), Hips (2) | 420 | ASTM F887, ANSI/ASSP Z359.11, OSHA Compliant 29 CFR 1926.502 | Impact-Indicating Stitching, Lanyard Holders | 0000000 | 000000 |
| L | 4'10"-6'5" | 100-310 | 42" to 51" | Nomex/Kevlar | Back (1), Chest (1), Hips (2) | 420 | ASTM F887, ANSI/ASSP Z359.11, OSHA Compliant 29 CFR 1926.502 | Impact-Indicating Stitching, Lanyard Holders | 0000000 | 000000 |
| XL | 5'8"-6'5" | 240-310 | 46" to 55" | Nomex/Kevlar | Back (1), Chest (1), Hips (2) | 420 | ASTM F887, ANSI/ASSP Z359.11, OSHA Compliant 29 CFR 1926.502 | Impact-Indicating Stitching, Lanyard Holders | 0000000 | 000000 |
| 2XL | 6'2"-6'5" | 270-310 | 50" to 59" | Nomex/Kevlar | Back (1), Chest (1), Hips (2) | 420 | ASTM F887, ANSI/ASSP Z359.11, OSHA Compliant 29 CFR 1926.502 | Impact-Indicating Stitching, Lanyard Holders | 0000000 | 000000 |
Heat-Resistant Fall-Arrest Harnesses for Positioning
Maintain a stable working position on the sides of scaffolding and other vertical structures, even where flying sparks and high temperatures could weaken a harness. Made with Kevlar webbing, these harnesses won’t ignite when exposed to welding spatter, sparks, and high heat. Kevlar is strong and resists abrasions, so these harnesses last longer than standard harnesses. Clip positioning lanyards to the hip D-rings on these harnesses to stay close to your work and free up your hands. Attach a lanyard to the D-ring on the back, and these harnesses will keep you upright if you fall. Used together with an anchor and lanyard, these harnesses help you meet OSHA and ANSI safety standards.
Park an unused lanyard on one of the lanyard holders to keep it from dragging or getting caught. Indicator stitching is designed to tear during a fall or impact, so it’s easy to tell if a harness is still safe to use.
| Harness Size | For Height | For Weight, lbs. | Waist Size | Max. Temperature, °F | Harness Material | D-Ring Location (No. of) | Capacity, lbs. | Specifications Met | Features | Each | |
Front-Buckle Harness—Slide Thigh Buckle | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| S | 4'10"-6'0" | 100-160 | 32" to 40" | 800° | Kevlar | Back (1), Hips (2) | 420 | ANSI/ASSP Z359.11, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502 | Impact-Indicating Stitching, Lanyard Holders | 0000000 | 0000000 |
| M/L | 5'0"-6'2" | 140-280 | 36" to 48" | 800° | Kevlar | Back (1), Hips (2) | 420 | ANSI/ASSP Z359.11, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502 | Impact-Indicating Stitching, Lanyard Holders | 0000000 | 000000 |
| XL | 5'2"-6'6" | 200-330 | 44" to 52" | 800° | Kevlar | Back (1), Hips (2) | 420 | ANSI/ASSP Z359.11, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502 | Impact-Indicating Stitching, Lanyard Holders | 0000000 | 000000 |
Electrical Arc-Flash-Resistant Wrap-Around Fall-Arrest Anchors
Made of Kevlar, these anchors withstand high heat and electrical arcs that would weaken a standard webbing anchor. They’ve been tested against the highest level of electrical arc-flash hazards to meet ASTM F887. Loop them around beams, rails, and other approved structures—they’re easy to move between work sites. Their webbing construction makes them lightweight and flexible. Plus, they won’t damage the anchoring surface. When used together with a harness and lanyard, these anchors help you meet OSHA and ANSI safety standards.
| Lg., ft. | Material | Connection Type | Breaking Strength, lbs. | Capacity, lbs. | Specifications Met | Each | |
Webbing | |||||||
|---|---|---|---|---|---|---|---|
| 4 | Kevlar | D-Ring × Webbing Loop | 5,000 | 425 | ASTM F887, ANSI Z359.18, OSHA Compliant 29 CFR 1910.66, OSHA Compliant 29 CFR 1926.502 | 0000000 | 0000000 |