We will reply to your message within an hour.
More
This zero-VOC paint is for use in enclosed occupied areas, such as hospitals, schools, and offices.
Restore existing water- and smoke-stained ceiling tiles to their original appearance.
Eliminate paint splatter clean-up—drops dry to a powder as they fall from ceilings 10 feet and higher.
This acrylic-lacquer paint produces a thick, durable finish that won’t run or drip as it dries.
Paint metal surfaces to stop rust from starting and prevent existing rust from spreading.
Unlike paint that must be diluted, this paint comes ready for use with an air brush.
Enhance, renew, and protect surfaces.
Create a washable writing surface.
Mark traffic lanes, parking lots, and factory floors.
Unlike other marking paint, this paint sprays in the upright position and dries fast, so it won't drip when applied overhead.
This chalk disappears in approximately 15 days when exposed to water, traffic, or abrasion.
Marks made with this paint fade naturally in approximately 30 days. It is water based and will not harm grass or other plant life.
This paint lays on thicker than other turf marking paint, making cleaner, bolder lines. It is water based and will not harm grass or other plant life.
This water-based paint sprays in an inverted position and will not harm grass or other plant life.
Cover stains from smoke, water, and ink to prevent them from bleeding through your topcoat, extending the life of paint and coatings.
Use these primers in enclosed occupied areas, such as hospitals, schools, and offices. They cover stains and prepare your surface, extending the life of paint and coatings.
Increase paint’s ability to bond to hard, smooth surfaces, such as tile and metal.
Use this zero-VOC primer on drywall in enclosed occupied areas, such as hospitals, schools, and offices, to extend the life of paint.
Add long-term corrosion protection to uncoated or rusty metal surfaces. These primers prepare your surface to extend the life of paint and coatings.
Get the power of a two-part epoxy primer in an easy-to-use aerosol can. These primers have excellent chemical and corrosion resistance. Spray them on uncoated or rusty metal to extend the life of paint and coatings.
These primers stand up to marine exposure and salt spray. Use them to prepare your surface to extend the life of paint and coatings.
These primers convert rust into a layer of protection that prevents new rust from forming. Use them to prepare your surface to extend the life of paint and coatings.
Protect steel and iron parts from corrosion without having to remove the primer before welding them together. Often used on structural steel in demanding environments, these primers can be welded through without affecting the weld’s integrity.
Use these primers on metal surfaces in enclosed occupied areas, such as hospitals, schools, and offices. They have excellent resistance to moisture and corrosion and bond well to metal to extend the life of paint and coatings.
These primers have excellent adhesion to plastic. Use them to prepare your surface to extend the life of paint and coatings.
Also known as block filler, these primers fill cracks and smooth surface irregularities. Use them to prepare concrete floors to extend the life of paint and coatings.
These thin primers penetrate deeply into concrete floors to create a hard surface that can then be coated with any urethane or epoxy coating.
Prepare foam pipe insulation for use outdoors. These coatings provide a clean, moisture-resistant finish that protects insulation from UV and ozone damage.
Commonly used by electronics manufacturers and research labs, apply these coatings to floors and walls to protect equipment from static electricity buildup.
Grit in these coatings provides traction and fills hairline cracks. Coatings form a weather- and water-resistant seal to protect and revitalize asphalt surfaces.
Longer-lasting than antislip tape, these coatings contain grit to provide traction. They’re good for areas with pedestrian traffic.
These high-traction antislip coatings have zero VOCs and are low odor. They contain grit to provide traction to pedestrian, cart, and hand-truck traffic.
Use these coatings in kitchens, furnace areas, and ships on plastic, metal, wood, and masonry.
Protect and revitalize asphalt surfaces with these tar-free coatings that form a weather- and water-resistant seal.
Prevent the growth of harmful and odor-causing bacteria, mold, and fungus on HVAC system components and hardware. These coatings contain silver, which inhibits the growth of mildew, mold, and fungus.
Seal freshly finished concrete to prevent it from drying too quickly during the curing process. These coatings also protect against mild chemicals, salts, soaps, and detergents.
Able to withstand temperatures of up to 2000° F, these coatings absorb heat and release it later. Use them to improve the thermal efficiency of heaters, furnaces, and ovens to reduce energy costs. Also known as high-emissivity coatings.
These coatings are more durable than our standard coatings for concrete floors. They provide a stain-resistant finish that protects your floors from moisture, chemicals, foot traffic, and hand carts.
Protect concrete from mild chemicals, salts, soaps, and detergents.
These coatings are used in enclosed, high-traffic spaces. Thicker than polyurethane and paint, they protect against abrasion and resist moisture and chemicals.
Designed for use in truck beds, these durable coatings create a tough, textured finish that prevents objects from sliding. Made from polyurethane, they resist abrasion and won’t fade from exposure to UV light.
Refinish porcelain sinks, tubs, and tile and give laminates a high-gloss finish.
Seal brick, mortar, and concrete to prevent water damage. These coatings create a thin, clear layer that sits on the surface of masonry and repels water.
Use these coatings on structural lumber, decking, and wood shingles.
Spray these coatings on grout to form a barrier against dirt, water, mildew, and discoloration.
Use these coatings on steel beams and pipes.
Reflect at least 85% of the sun's rays to reduce cooling costs. These coatings also restore and reinforce your roof by filling cracks and forming a water-resistant seal.
A hard waxy film protects items from abrasion. Coatings provide long-lasting protection against rust and corrosion. Remove with an alkaline cleaner.
These coatings are often used in food-processing areas. They form a tacky film that provides long-lasting protection against rust and corrosion. Remove with an alkaline cleaner.
These coatings are often used on castings, dies, and mirrors to prevent rust, abrasion, and moisture penetration.
These low-odor coatings form a waxy film similar to lube oil, so parts can remain coated for assembly. They can be removed with an alkaline cleaner.
Protect metal with these low-odor, water-based, UV-resistant coatings. They contain 316 stainless steel flakes, which provide durability and superior corrosion resistance.
These additives slow down paint’s cure time, allowing it to flow better and fill in brushstrokes for a smooth finish. They also improve adhesion.
Mix these additives with any water-based paint to limit the spread of flames and generation of smoke when they’re used on interior surfaces, such as drywall and wood.
Remove grease, oil, and dirt from your concrete floors.
Cut through paint and coatings on powder-coated metal and plastic. Use these low-odor fast-acting removers to prepare surfaces for refinishing.
These soybean-based paint and coating removers are low odor and can be used on most surfaces. Use them to strip paint, varnish, and urethane.
Strip paint, varnish, and epoxy, penetrating several layers at once.
Tackle tough jobs—these removers strip up to 30 layers of paint per application. Use them to prepare surfaces for refinishing.
Strip up to 10 layers of polyurethane and marine coatings at once. Use these removers to prepare surfaces for refinishing.
Fill these pens with paint for a precise and tidy touch-up.
These thinners are often used for cleanup and to thin paint for spray applications.
Also known as drywall mud, these joint compounds are ready to use. Apply with drywall tape over seams for a finished appearance.
Make flexible, waterproof repairs to rips and tears in canvas, leather, and acrylic fabric.
Clean up water-based paint messes without damaging the surface underneath.
Often used to prepare parts for painting or powder coating, these water-based cleaners remove dirt, grease, metal residue, and mold-release lubricants.
Includes one black, blue, orange, red, white, and yellow marker.
Choose only the colors you need. These rich colors won’t fade in sunlight or exposure to weather.