McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    32 Products

    Live Centers

    Image of Product. Side1 orientation. Contains Annotated. Lathe Centers. Live Centers, Standard Point.
    Image of Product. Side1 orientation. Contains Annotated. Lathe Centers. Live Centers, Bull-Nose Point.

    Standard Point

    Bull-Nose Point

    Image of Product. Side1 orientation. Contains Annotated. Lathe Centers. Live Centers, Extended Point, Precision.
    Image of Product. Side1 orientation. Contains Annotated, Inset. Lathe Centers. Live Centers, Extended-Cone Point.

    Extended Point

    Precision

    Extended-Cone Point

    Keep your workpiece spinning while staying supported when machining. These live centers spin with your piece to reduce friction between their point and your material. For smooth rotation, these centers turn on lubricated bearings. The bearings are enclosed to protect against chips and liquid. With a hardened body and point for extra strength and wear resistance, these live centers will hold up, use after use. Use them in the tailstock with manual or CNC lathes.
    Bull-Nose Point—Bull-nose point centers have a wide head to hold large-diameter hollow pipe and tubing. Choose an 80° point angle for more contact area and less vibration than a 60° point angle.
    Extended Point—Extended point make it easier to machine complex shapes and features as they give you extra tool clearance for CNC machining.
    Extended-Cone Point—Extended-cone point centers are multipurpose and make it easier to machine complex shapes and features as they give you extra tool clearance for CNC machining. Use the extended point to support solid workpieces or the cone point to support hollow workpieces such as pipes and tubes.
    Precision—Precision centers wobble less than standard live centers for six to eight times greater accuracy as they spin.
    High Speed—High-speed centers for pipe and tubing are rated to twice the speed as standard centers.
    Total Indicated Runout (TIR) Accuracy—TIR (total indicated runout) is a measure of rotational smoothness—the lower the value, the less wobble a rotating tool will have and the more accurate it will be.
    Machine
    Taper No.
    Max. Workpiece
    Cap., lb.
    Max. Rotation
    Speed, rpm
    Total Indicated Runout
    (TIR) Accuracy
    Point
    Dia.
    Head
    Dia.
    Point
    Lg.
    Overall
    Lg.
    Point
    Angle
    Material
    Each
    Standard Point
     
    Lathe Centers
    Morse 39254,0000.0003"0.98"2 13/64"1 1/8"6 9/64"60°Hardened Steel3229A330000000
     
    Precision
    Morse 39705,0000.00005"1"2 11/32"1 15/64"6 13/32"60°Hardened Steel3259A12000000
     
    Bull-Nose Point
     
    Lathe Centers
    Morse 33,8002,5000.00015"4"—3 29/32"7 15/32"60°Hardened Steel3265A22000000
     
    High Speed
    Morse 32,7007,0000.0001"3.5"—2 5/32"6 31/32"60°Hardened Steel9435N13000000
     
    Extended Point
     
    Precision
    Morse 37405,0000.00005"1"2 21/64"1 55/64"7 3/64"60°Hardened Steel3305A32000000
     
    Extended-Cone Point
     
    Multipurpose
    Morse 36854,0000.0001"2.63"—2 21/32"6 15/16"60°Hardened Steel9435N17000000
     

    Interchangeable Point Lathe Centers

    Mix and match points and bodies to create a lathe center that suits your job. Use an extractor (sold separately) to remove a point and swap in a new one.
    Center Points
    Image of Product. Front orientation. Lathe Centers. Interchangeable Point Lathe Centers, Center Points, Standard Point.

    Standard Point

    Image of Product. Front orientation. Lathe Centers. Interchangeable Point Lathe Centers, Center Points, Bull-Nose Point.

    Bull-Nose Point

    Image of Product. Front orientation. Lathe Centers. Interchangeable Point Lathe Centers, Center Points, Cup Point.

    Cup Point

    Image of Product. Front orientation. Lathe Centers. Interchangeable Point Lathe Centers, Center Points, Flat-Knurled Point.

    Flat-Knurled Point

    Image of Product. Front orientation. Lathe Centers. Interchangeable Point Lathe Centers, Center Points, Half Point.

    Half Point

    Image of Product. Front orientation. Lathe Centers. Interchangeable Point Lathe Centers, Center Points, Extended-Tip Point, Precision.

    Extended-Tip Point

    Precision

    Standard Point—Standard points provide tool clearance for CNC applications, making it easier to machine complex shapes and features.
    Bull-Nose Point— Bull-nose points have a wide head for holding hollow workpieces with large diameters. They’re often used with pipes and tubes.
    Cup Point—Cup points are designed to grip the outer diameter of a workpiece—instead of a tip, they have a cup-shaped recess. They’re also known as female points.
    Flat-Knurled Point—Flat knurled points sit flush against workpieces for a tight grip. Their knurls create friction that keeps your workpiece from slipping.
    Half Point—Half points are cut away on one side to hold shafts with keyways, flats, or irregular shapes. They’re used only in dead centers.
    Extended-Tip Point—Extended-tip points are shaped to provide more tool clearance than standard points without adding much length. They’re also used for machining complex shapes and features.
    Live—Live centers sit in the tailstock to support the end of a workpiece. They spin with the workpiece to reduce friction between the tip and the material. For smooth rotation, these centers turn on lubricated bearings. The bearings are sealed to protect against chips and liquid, which extends the life of the tool.
    Precision—Precision live centers wobble less than standard live centers for three to five times greater accuracy as they spin.
    Dead—Use dead centers in your headstock to support a workpiece when machining between centers. When friction isn’t a concern, you can also use them in the tailstock to support the end of a workpiece. Dead centers don’t spin freely, so they provide a fixed point that stabilizes your workpiece. They can handle heavier loads than live centers. However, under high pressure, they can become lodged in the tailstock. To remove them without damaging your equipment, tighten a hex nut (sold separately) onto the threaded end. Use a wrench to turn the nut against the tailstock and push the center out.
    Carbide-Tipped Steel—Carbide-tipped points are more wear resistant than hardened steel points. They're a good choice for high-volume operations and for holding hard or highly abrasive materials.
    For Machine
    Taper No.
    Point
    Dia.
    Point Tip
    Dia.
    Point
    Lg.
    Point
    Angle
    Material
    Each
    Standard Point
     
    Dead
    Morse 31"1/2"1 3/8"—Carbide-Tipped Steel9448N530000000
     
    Live
    Morse 30.79"—63/64"—Steel9448N1800000
     
    Precision Live and Dead
    Morse 2, Morse 31"—1 11/64"—Steel9448N49000000
     
    Bull-Nose Point
     
    Live
    Morse 30.79"3/64"7/8"60°Steel9448N2400000
    Morse 31.42"15/64"7/8"90°Steel9448N1900000
    Morse 32.48"1 19/64"7/8"90°Steel9448N2100000
     
    Precision Live and Dead
    Morse 2, Morse 31.75"7/8"1 11/64"60°Steel9448N52000000
     
    Cup Point
     
    Live
    Morse 31.42"1 7/64"7/8"—Steel9448N2200000
    Morse 31.77"1 1/2"7/8"—Steel9448N2300000
     
    Precision Live
    Morse 2, Morse 31.13"7/8"1 5/64"—Steel9448N5000000
     
    Flat-Knurled Point
     
    Live
    Morse 30.98"—7/8"—Steel9448N2500000
     
    Half Point
     
    Dead
    Morse 31"1/4"2"—Steel9448N54000000
     
    Extended-Tip Point
     
    Precision Live and Dead
    Morse 2, Morse 30.75"3/8"1 19/64"—Steel9448N51000000
     
    Center Bodies
    Image of Product. Front orientation. Lathe Centers. Interchangeable Point Lathe Centers, Dead.
    Image of Product. Front orientation. Lathe Centers. Interchangeable Point Lathe Centers, Live.
    Image of Product. Front orientation. Lathe Centers. Interchangeable Point Lathe Centers, Precision Live.

    Dead

    Live

    Precision Live

    Total Indicated Runout (TIR) Accuracy—TIR (total indicated runout) is a measure of rotational smoothness—the lower the value, the less wobble a rotating tool will have and the more accurate it will be.
    Lathe Centers
    Extractors
    Hex Nuts
    Max. Workpiece
    Cap., lb.
    Max. Rotation
    Speed, rpm
    Total Indicated Runout
    (TIR) Accuracy
    Head
    Dia.
    Overall
    Lg.
    Material
    Includes
    Each
    Each
    Pkg.
    Qty.
    Pkg.
     
    Dead
    ——0.00025"3/4"4 3/8"Steel—9445N1800000009452N260000002590494A237000000
     
    Live
    4404,0000.0008"2 13/64"5 7/32"Steel—9445N120000009452N1700000————0
     
    Precision Live
    3505,0000.00025"2 1/8"5 9/16"Steel1" dia. Hardened Steel Standard Point9445N170000009452N2600000————0
     

    Dead Centers

    Image of Product. Side1 orientation. Contains Annotated. Lathe Centers. Dead Centers, Standard Point.
    Image of Product. Side1 orientation. Contains Annotated. Lathe Centers. Dead Centers, Bull-Nose Point.

    Standard Point

    Bull-Nose Point

    Insert these in your headstock to support your workpiece when machining between centers. Unlike live centers, dead centers don’t spin freely, so they give you a fixed point to stabilize your material. You can also use them in the tailstock to support the end of the workpiece when friction isn’t a concern. Made of through-hardened 52100 alloy steel—a material originally developed for bearings—these centers have exceptional hardness, strength, and wear resistance. That means you'll have to replace them less often than centers made of low-quality steel. You can also apply high-pressure grease on the point to reduce friction and wear.
    Bull-Nose Point—Bull-nose centers are ideal for hollow workpieces such as pipe and tubing.
    Carbide-Tipped Steel—Carbide-tipped hardened steel dead centers have better wear resistance than hardened steel dead centers. They’re ideal for high-volume work and holding highly abrasive and hard materials.
    Steel
    Carbide-Tipped
    Steel
    Machine
    Taper No.
    Point
    Dia.
    Point Tip
    Dia.
    Point
    Lg.
    Overall
    Lg.
    Total Indicated Runout
    (TIR) Accuracy
    Each
    Each
    Standard Point
    Morse 30.938"—2 1/16"5 1/4"0.00005"9450N1300000009450N140000000
     
    Bull-Nose Point
    Morse 32.75"1"2 33/64"5 3/4"0.00005"9450N250000009450N2600000000
     

    Interchangeable Point Lathe Center Sets

    Keep a variety of lathe center points on hand so you always have the right tool for the job. These sets include at least four different points, as well as a lathe center body and a point extractor. Use the point extractor to remove a point from the body and swap in another. You can replace bodies, points, and extractors individually if they become worn or damaged.
    Standard points provide tool clearance for CNC applications, making it easier to machine complex shapes and features.
    Bull-nose points have a wide head for holding hollow workpieces with large diameters. They’re often used with pipes and tubes.
    Dead Lathe Center
    Image of Product. Front orientation. Lathe Centers. Interchangeable Point Lathe Center Sets, Dead Lathe Center.
    Carbide-tipped points are more wear resistant than hardened steel points. They're a good choice for high-volume operations and for holding hard or highly abrasive materials.
    Use dead centers in your headstock to support a workpiece when machining between centers. When friction isn’t a concern, you can also use them in the tailstock to support the end of a workpiece. Dead centers don’t spin freely, so they provide a fixed point that stabilizes your workpiece. They can handle heavier loads than live centers. However, under high pressure, they can become lodged in the tailstock. To remove them without damaging your equipment, tighten a hex nut (sold separately) onto the threaded end. Use a wrench to turn the nut against the tailstock and push the center out.
    Extended-tip points are shaped to provide more tool clearance than standard points without adding much length. They’re also used for machining complex shapes and features.
    Half points are cut away on one side to hold shafts with keyways, flats, or irregular shapes. They’re used only in dead centers.
    Total Indicated Runout (TIR) Accuracy—TIR (total indicated runout) is a measure of rotational smoothness. The lower the value, the less wobble a rotating tool will have and the more accurate it will be.
    Machine
    Taper No.
    Total Indicated Runout
    (TIR) Accuracy
    Head
    Dia.
    Thread
    Size
    Shank
    Lg.
    Overall
    Lg.
    Material
    No. of
    Pieces
    Includes
    Each
    Morse 30.00025"3/4"7/8"-14
    		3 3/16"4 3/8"Steel70.75" dia. Hardened Steel Extended-Tip Point, 1" dia. Carbide-Tipped Hardened Steel Standard Point, 1" dia. Hardened Steel Half Point, 1" dia. Hardened Steel Standard Point, 1.75" dia. Hardened Steel Bull-Nose Point, Dead Center Body, Point Extractor9438N11000000000
    Live Lathe Center
    Image of Product. Front orientation. Lathe Centers. Interchangeable Point Lathe Center Sets, Live Lathe Center.
    Flat knurled points sit flush against workpieces for a tight grip. Their knurls create friction that keeps your workpiece from slipping.
    Live centers sit in the tailstock to support the end of a workpiece. They spin with the workpiece to reduce friction between the tip and the material. For smooth rotation, these centers turn on lubricated bearings. The bearings are sealed to protect against chips and liquid, which extends the life of the tool.
    Total Indicated Runout (TIR) Accuracy—TIR (total indicated runout) is a measure of rotational smoothness. The lower the value, the less wobble a rotating tool will have and the more accurate it will be.
    Machine
    Taper No.
    Max. Workpiece
    Cap., lb.
    Max. Rotation
    Speed, rpm
    Total Indicated Runout
    (TIR) Accuracy
    Head
    Dia.
    Shank
    Lg.
    Overall
    Lg.
    Material
    No. of
    Pieces
    Includes
    Each
    Morse 34404,0000.0008"2 13/64"3 3/16"5 7/32"Steel90.79" dia. Hardened Steel Bull-Nose Point, 0.79" dia. Hardened Steel Standard Point, 0.98" dia. Hardened Steel Flat-Knurled Point, 1.42" dia. Hardened Steel Bull-Nose Point, 1.42" dia. Hardened Steel Cup Point, 1.77" dia. Hardened Steel Cup Point, 2.48" dia. Hardened Steel Bull-Nose Point, Live Center Body, Point Extractor9452N120000000
    Precision, Live Lathe Center
    Image of Product. Front orientation. Lathe Centers. Interchangeable Point Lathe Center Sets, Live Lathe Center, Precision.
    Cup points are designed to grip the outer diameter of a workpiece—instead of a tip, they have a cup-shaped recess. They’re also known as female points.
    Precision live centers wobble less than standard live centers for three to five times greater accuracy as they spin.
    Extended-tip points are shaped to provide more tool clearance than standard points without adding much length. They’re also used for machining complex shapes and features.
    Live centers sit in the tailstock to support the end of a workpiece. They spin with the workpiece to reduce friction between the tip and the material. For smooth rotation, these centers turn on lubricated bearings. The bearings are sealed to protect against chips and liquid, which extends the life of the tool.
    Total Indicated Runout (TIR) Accuracy—TIR (total indicated runout) is a measure of rotational smoothness. The lower the value, the less wobble a rotating tool will have and the more accurate it will be.
    Machine
    Taper No.
    Max. Workpiece
    Cap., lb.
    Max. Rotation
    Speed, rpm
    Total Indicated Runout
    (TIR) Accuracy
    Head
    Dia.
    Shank
    Lg.
    Overall
    Lg.
    Material
    No. of
    Pieces
    Includes
    Each
    Morse 33505,0000.00025"2 1/8"3 3/16"5 9/16"Steel60.75" dia. Hardened Steel Extended-Tip Point, 1" dia. Hardened Steel Standard Point, 1.13" dia. Hardened Steel Cup Point, 1.75" dia. Hardened Steel Bull-Nose Point, Live Center Body, Point Extractor9452N23000000000
    back to top