DCGT-Insert Lathe Tool Inserts

Filter by

Product Family

Lathe Tool Insert Holders

Insert Shape

For Use On

Heat-Resistant Super Alloy

System of Measurement

Inch

Inscribed Circle Diameter (IC)

Nose Angle

Tip Radius

Insert Designation

Cut Type

Along-the-Length Turning

Insert Holder Code

Insert Code

Cutting Direction

Shank Height

Finish

Aluminum Titanium Chromium Nitride (AlTiCrN) Coated

Aluminum Titanium Nitride (AlTiN) Coated

Diamondlike Carbon (DLC) Coated

Titanium Aluminum Nitride (TiAlN) Coated

Titanium Nitride (TiN) Coated

Material

Relief Angle

Thickness

For Cutting Operation

Rake Angle Type

Cutting Edge Length

Hole Diameter

Shank Width

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

RoHS

REACH

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

EAR99

Forward

How can we improve?

Help me decide (beta)

77 Products

Precision Lathe Tool Inserts for Stainless Steel and Heat-Resistant Super Alloys

Strong enough for use on titanium, stainless steel, and other tough metals, a PVD coating keeps these inserts sharp for longer than inserts with a CVD coating. Also known as Swiss lathe tools, they’re designed for use in precision lathes. Install them into a matching holder.

These inserts are meant for semi-interrupted cutting conditions. As the most common insert type, they often machine imperfectly round workpieces, like shafts with a keyway. They also have a positive rake, which means they stick out in front of the holder to reach tight spaces on your workpiece. However, they don’t last as long as negative rake inserts because they have cutting edges on only one side. Since these inserts have a 0° lead angle, or a neutral cut direction, they can cut from either right to left or left to right.

Inserts with a larger nose angle and tip radius remove more material with each pass but cut less precisely than smaller inserts. Select the insert with the largest nose angle and tip radius that will turn your workpiece to the desired shape.

DCGT (Diamond with 55° Nose Angle)—For ADJC, KSTB, SDJC, SDLC, SDNC, SDQC, SDUC, and SDZC Holders


	Individual Carbide Insert Case

Image of Attribute. Front orientation. Contains Annotated. DCGT Insert.

Individual—Inserts sold individually come packed in a clear plastic case to protect cutting edges during shipment.

Package—Inserts sold in packages come factory sealed from the manufacturer for maximum traceability.

For Medium Cutting Operation—Medium inserts remove a moderate amount of material for a semi-smooth surface finish.

For Finishing Cutting Operation—Use finishing inserts at the end of your turning process to remove minimal material for a smooth finish.

													Individual				Package
	Insert Code	Finish	IC Dia.	Thk.	Hole Dia.	Cutting Edge Lg.	Tip Radius	Rake Angle Type	For Cutting Operation	Coating Process	Features	Mfr.	Includes	Pkg. Qty.		Pkg.	Pkg. Qty.		Pkg.
For Use On Stainless Steel, Titanium, and Heat-Resistant Super Alloy







				For Semi-Interrupted Cutting Conditions

				DCGT-21.50.2	Aluminum Titanium Chromium Nitride (AlTiCrN) Coated	1/4"	3/32"	0.11"	0.3"	0.004"	Positive	Medium, Finishing	PVD (Physical Vapor Deposition)	Chip Breakers	Kyocera	Clear Plastic Case	1	8881N17	000000	10	8881N37	0000000


				DCGT-21.50.5	Aluminum Titanium Chromium Nitride (AlTiCrN) Coated	1/4"	3/32"	0.11"	0.3"	0.008"	Positive	Medium, Finishing	PVD (Physical Vapor Deposition)	Chip Breakers	Kyocera	Clear Plastic Case	1	8881N18	00000	10	8881N38	000000
				DCGT-21.51	Aluminum Titanium Chromium Nitride (AlTiCrN) Coated	1/4"	3/32"	0.11"	0.29"	1/64"	Positive	Medium, Finishing	PVD (Physical Vapor Deposition)	Chip Breakers	Kyocera	Clear Plastic Case	1	8881N19	00000	10	8881N39	000000
				DCGT-32.50.2	Aluminum Titanium Chromium Nitride (AlTiCrN) Coated	3/8"	5/32"	0.173"	0.45"	0.004"	Positive	Medium, Finishing	PVD (Physical Vapor Deposition)	Chip Breakers	Kyocera	Clear Plastic Case	1	8881N21	00000	10	8881N41	000000
				DCGT-32.50.5	Aluminum Titanium Chromium Nitride (AlTiCrN) Coated	3/8"	5/32"	0.173"	0.45"	0.008"	Positive	Medium, Finishing	PVD (Physical Vapor Deposition)	Chip Breakers	Kyocera	Clear Plastic Case	1	8881N22	00000	10	8881N42	000000
				DCGT-32.51	Aluminum Titanium Chromium Nitride (AlTiCrN) Coated	3/8"	5/32"	0.173"	0.44"	1/64"	Positive	Medium, Finishing	PVD (Physical Vapor Deposition)	Chip Breakers	Kyocera	Clear Plastic Case	1	8881N23	00000	10	8881N43	000000

Lathe Tool Inserts for Multiple Materials

Choose these premium carbide inserts to turn a variety of materials without changing out your tool. They’re made of higher-quality carbide than economy inserts, so they last longer and create a smoother finish. Install them into a matching holder. For the best performance, choose an insert designed for the material of your workpiece.

Inserts with a larger nose angle and tip radius remove more material with each pass, but they cut less precisely than smaller inserts. Select the insert with the largest nose angle and tip radius that will turn your workpiece to the shape you want.

DCGT (Diamond with 55° Nose Angle)—For SDJC Holders

Image of Product. Front orientation. Lathe Tool Inserts. Lathe Tool Inserts for Multiple Materials, DCGT Insert.

Clear Plastic Case

For Semi-Interrupted Cutting Conditions—Inserts for semi-interrupted cutting conditions are used to machine imperfectly round workpieces, such as shafts with a keyway. They’re the most common type of insert.

Individual—Inserts sold individually come packed in a clear plastic case to protect cutting edges during shipment.

Package—Inserts sold in packages come factory sealed from the manufacturer for maximum traceability.

Titanium Aluminum Nitride (TiAlN) Coated—Inserts with a titanium aluminum nitride (TiAlN) coating dissipate heat well, especially at high speeds. The coating reacts to high temperatures by forming a layer of aluminum oxide. This layer transfers heat to the chips, so the tool stays cool even without lubrication.

Positive Rake Angle—Positive-rake inserts stick out in front of the holder to reach tight spaces on the workpiece. However, they only have cutting edges on one side.

For Medium Cutting Operation—Medium inserts remove a moderate amount of material for a semi-smooth surface finish.

Chip Breakers—Inserts with chip breakers prevent long chips from forming, so they won’t block the flow of coolant or damage your tool.

													Individual				Package
	Insert Code	Finish	IC Dia.	Thk.	Hole Dia.	Cutting Edge Lg.	Tip Radius	Rake Angle Type	For Cutting Operation	Coating Process	Features	Mfr.	Includes	Pkg. Qty.		Pkg.	Pkg. Qty.		Pkg.
For Use On Aluminum, Brass, Bronze, Copper, Nickel, Plastic, Stainless Steel, and Steel







				For Semi-Interrupted Cutting Conditions

				DCGT-21.50.5	Titanium Aluminum Nitride (TiAlN) Coated	1/4"	3/32"	0.11"	0.3"	0.008"	Positive	Medium	PVD (Physical Vapor Deposition)	Chip Breakers	Sandvik Coromant	Clear Plastic Case	1	3867N166	000000	10	3867N486	0000000


				DCGT-21.51	Titanium Aluminum Nitride (TiAlN) Coated	1/4"	3/32"	0.11"	0.29"	1/64"	Positive	Medium	PVD (Physical Vapor Deposition)	Chip Breakers	Sandvik Coromant	Clear Plastic Case	1	3867N167	00000	10	3867N488	000000
				DCGT-32.50.5	Titanium Aluminum Nitride (TiAlN) Coated	3/8"	5/32"	0.173"	0.45"	0.008"	Positive	Medium	PVD (Physical Vapor Deposition)	Chip Breakers	Sandvik Coromant	Clear Plastic Case	1	3867N168	00000	10	3867N49	000000
				DCGT-32.51	Titanium Aluminum Nitride (TiAlN) Coated	3/8"	5/32"	0.173"	0.44"	1/64"	Positive	Medium	PVD (Physical Vapor Deposition)	Chip Breakers	Sandvik Coromant	Clear Plastic Case	1	3867N169	00000	10	3867N492	000000
				DCGT-32.52	Titanium Aluminum Nitride (TiAlN) Coated	3/8"	5/32"	0.173"	0.43"	1/32"	Positive	Medium	PVD (Physical Vapor Deposition)	Chip Breakers	Sandvik Coromant	Clear Plastic Case	1	3867N171	00000	10	3867N496	000000

Lathe Tool Inserts for Non-Ferrous Materials

Cut aluminum, copper, brass, and other non-ferrous materials with these premium inserts. Their chipbreakers are designed for turning soft, sticky metal—they break and curl chips before they become long enough to cause damage. Install these inserts in a matching holder.

DCGT (Diamond with 55° Nose Angle)—For ADJC, SDJC, SDLC, SDNC, SDUC, and SDXC Holders

For Continuous Cutting Conditions—Use inserts for continuous cutting conditions to stay in constant contact with perfectly round workpieces, such as rods.

Individual—Inserts sold individually come packed in a clear plastic case to protect cutting edges during shipment.

Package—Inserts sold in packages come factory sealed from the manufacturer for maximum traceability.

Diamondlike Carbon (DLC) Coated—Diamondlike carbon (DLC) coated inserts have sharper cutting edges than uncoated inserts, and they last longer.

Positive Rake Angle—Positive-rake inserts stick out in front of the holder to reach tight spaces on the workpiece. They only have cutting edges on one side, so they don’t last as long as negative-rake inserts.

For Finishing Cutting Operation—Use finishing inserts at the end of your turning process to remove minimal material for a smooth surface finish.

												Individual				Package
	Insert Code	Finish	IC Dia.	Thk.	Hole Dia.	Cutting Edge Lg.	Tip Radius	Rake Angle Type	For Cutting Operation	Features	Mfr.	Includes	Pkg. Qty.		Pkg.	Pkg. Qty.		Pkg.
For Use On Aluminum, Brass, Bronze, Copper, and Plastic







				For Continuous Cutting Conditions

				DCGT-21.50.2	Diamondlike Carbon (DLC) Coated	1/4"	3/32"	0.11"	0.28"	0.004"	Positive	Finishing	Chip Breakers	Kyocera	Clear Plastic Case	1	3244A014	000000	10	3244A029	0000000


				DCGT-21.50.5	Diamondlike Carbon (DLC) Coated	1/4"	3/32"	0.11"	0.28"	0.008"	Positive	Finishing	Chip Breakers	Kyocera	Clear Plastic Case	1	3244A015	00000	10	3244A03	000000

Precision Lathe Tool Inserts for Steel

Also known as Swiss lathe tools, these inserts are designed for use in precision lathes. Coated in multiple layers of PVD, they stay sharper longer than CVD-coated inserts. They’re optimized for steel but also work on stainless steel. Install inserts into a matching holder.

These inserts are meant for semi-interrupted cutting conditions. As the most common insert type, they often machine imperfectly round workpieces, like shafts with a keyway. They have a positive rake, meaning they stick out in front of the holder to reach tight spaces on the workpiece. However, they don’t last as long as negative rake inserts because they have cutting edges on only one side. Since these inserts have a 0° lead angle, or a neutral cut direction, they can cut from either right to left or left to right.

DCGT (Diamond with 55° Nose Angle)—For ADJC, SDJC, SDLC, SDNC, SDUC, and SDXC Holders


	Individual Carbide Insert Case

Individual—Inserts sold individually come packed in a clear plastic case to protect cutting edges during shipment.

Package—Inserts sold in packages come factory sealed from the manufacturer for maximum traceability.

For Medium Cutting Operation—Medium inserts remove a moderate amount of material for a semi-smooth surface finish.

For Finishing Cutting Operation—Use finishing inserts at the end of your turning process to remove minimal material for a smooth finish.

													Individual				Package
	Insert Code	Finish	IC Dia.	Thk.	Hole Dia.	Cutting Edge Lg.	Tip Radius	Rake Angle Type	For Cutting Operation	Coating Process	Features	Mfr.	Includes	Pkg. Qty.		Pkg.	Pkg. Qty.		Pkg.
For Use On Steel







				For Semi-Interrupted Cutting Conditions

				DCGT-21.50.2	Aluminum Titanium Nitride (AlTiN) Coated	1/4"	3/32"	0.11"	0.3"	0.004"	Positive	Medium, Finishing	PVD (Physical Vapor Deposition)	Chip Breakers	Kyocera	Clear Plastic Case	1	8873N17	000000	10	8873N34	0000000


				DCGT-21.50.5	Aluminum Titanium Nitride (AlTiN) Coated	1/4"	3/32"	0.11"	0.3"	0.008"	Positive	Medium, Finishing	PVD (Physical Vapor Deposition)	Chip Breakers	Kyocera	Clear Plastic Case	1	8873N18	00000	10	8873N35	000000
				DCGT-21.51	Aluminum Titanium Nitride (AlTiN) Coated	1/4"	3/32"	0.11"	0.29"	1/64"	Positive	Medium, Finishing	PVD (Physical Vapor Deposition)	Chip Breakers	Kyocera	Clear Plastic Case	1	8873N19	00000	10	8873N36	000000
				DCGT-32.50.2	Aluminum Titanium Nitride (AlTiN) Coated	3/8"	5/32"	0.173"	0.46"	0.004"	Positive	Medium, Finishing	PVD (Physical Vapor Deposition)	Chip Breakers	Kyocera	Clear Plastic Case	1	8873N21	00000	10	8873N37	000000
				DCGT-32.50.5	Aluminum Titanium Nitride (AlTiN) Coated	3/8"	5/32"	0.173"	0.46"	0.008"	Positive	Medium, Finishing	PVD (Physical Vapor Deposition)	Chip Breakers	Kyocera	Clear Plastic Case	1	8873N22	00000	10	8873N38	000000
				DCGT-32.51	Aluminum Titanium Nitride (AlTiN) Coated	3/8"	5/32"	0.173"	0.45"	1/64"	Positive	Medium, Finishing	PVD (Physical Vapor Deposition)	Chip Breakers	Kyocera	Clear Plastic Case	1	8873N23	00000	10	8873N39	000000

Turning Lathe Tool Insert Holders

Secure carbide inserts inside these holders for stable turning. They’re also known as indexable insert holders. Select a holder that’s compatible with your insert by matching the insert style and inscribed circle diameter (IC). Right-hand holders move from right to left toward the lathe chuck, left-hand holders move from left to right away from the lathe chuck, and neutral holders can cut in either direction.

SDJC Holders with Offset Shank


	Right-Hand Cutting Direction	Left-Hand Cutting Direction

Holders with an offset shank are good for reaching into tight corners and when working close to the chuck.

	Holders									Replacement Torx Screws		Replacement Torx Keys
	For Insert			Shank
	Designation	IC Dia.	Thk.	Wd.	Ht.	Overall Lg.	Mfr.		Each		Each		Each
Along-the-Length-Turning, Chamfering, External-Profiling, Facing Cut







				Right-Hand Cutting Direction

				DCGA, DCGT, DCGW, DCGX, DCMA, DCMT, DCMW	1/4"	3/32"	3/8"	3/8"	3 1/2"	Dorian Tool	3288A821	000000	3288A96	00000	6959A14	00000


				DCGA, DCGT, DCGW, DCGX, DCMA, DCMT, DCMW	1/4"	3/32"	1/2"	1/2"	4"	Dorian Tool	3288A822	00000	3288A96	0000	6959A14	0000
				DCGA, DCGT, DCGW, DCGX, DCMA, DCMT, DCMW	3/8"	5/32"	1/2"	1/2"	4"	Dorian Tool	3288A823	00000	3288A97	0000	———	0
				DCGA, DCGT, DCGW, DCGX, DCMA, DCMT, DCMW	3/8"	5/32"	5/8"	5/8"	4 1/2"	Dorian Tool	3288A824	00000	3288A97	0000	———	0
				DCGA, DCGT, DCGW, DCGX, DCMA, DCMT, DCMW	3/8"	5/32"	3/4"	3/4"	4 1/2"	Dorian Tool	3288A825	000000	3288A97	0000	———	0
				DCGA, DCGT, DCGW, DCGX, DCMA, DCMT, DCMW	3/8"	5/32"	1"	1"	6"	Dorian Tool	3288A436	000000	3288A97	0000	———	0




						Left-Hand Cutting Direction

						DCGA, DCGT, DCGW, DCGX, DCMA, DCMT, DCMW	1/4"	3/32"	3/8"	3/8"	3 1/2"	Dorian Tool	3288A826	00000	3288A96	0000	6959A14	0000


						DCGA, DCGT, DCGW, DCGX, DCMA, DCMT, DCMW	1/4"	3/32"	1/2"	1/2"	4"	Dorian Tool	3288A827	00000	3288A96	0000	6959A14	0000
						DCGA, DCGT, DCGW, DCGX, DCMA, DCMT, DCMW	3/8"	5/32"	1/2"	1/2"	4"	Dorian Tool	3288A828	00000	3288A97	0000	———	0
						DCGA, DCGT, DCGW, DCGX, DCMA, DCMT, DCMW	3/8"	5/32"	5/8"	5/8"	4 1/2"	Dorian Tool	3288A829	00000	3288A97	0000	———	0
						DCGA, DCGT, DCGW, DCGX, DCMA, DCMT, DCMW	3/8"	5/32"	3/4"	3/4"	4 1/2"	Dorian Tool	3288A831	000000	3288A97	0000	———	0

Lathe Tool Inserts for Steel

Optimized for use on steel, these inserts can run at higher cutting speeds and will last longer than inserts for multiple materials. Install inserts into a matching holder.

DCGT (Diamond with 55° Nose Angle)—For SDJC Holders

Image of Product. Front orientation. Lathe Tool Inserts. Lathe Tool Inserts for Steel, DCGT Insert.

Clear Plastic Case

For Semi-Interrupted Cutting Conditions—Inserts for semi-interrupted cutting conditions are the most commonly used, often to machine imperfectly round workpieces, such as shafts with a keyway.

Individual—Inserts sold individually come packed in a clear plastic case to protect cutting edges during shipment.

Package—Inserts sold in packages come factory sealed from the manufacturer for maximum traceability.

Positive Rake Angle—Positive-rake inserts stick out in front of the holder to reach tight spaces on the workpiece. However, they only have cutting edges on one side.

For Medium Cutting Operation—Medium inserts remove a moderate amount of material for a semi-smooth surface finish.

													Individual				Package
	Insert Code	Finish	IC Dia.	Thk.	Hole Dia.	Cutting Edge Lg.	Tip Radius	Rake Angle Type	For Cutting Operation	Coating Process	Features	Mfr.	Includes	Pkg. Qty.		Pkg.	Pkg. Qty.		Pkg.
For Use On Steel







				For Semi-Interrupted Cutting Conditions

				DCGT-21.50.5	Titanium Nitride (TiN) Coated	1/4"	3/32"	0.11"	0.3"	0.008"	Positive	Medium	CVD (Chemical Vapor Deposition)	Chip Breakers	Sandvik Coromant	Clear Plastic Case	1	6110N191	000000	10	6110N733	0000000


				DCGT-21.51	Uncoated	1/4"	3/32"	0.11"	0.29"	1/64"	Positive	Medium	—	Chip Breakers	Sandvik Coromant	Clear Plastic Case	1	6110N192	00000	10	6110N744	000000
				DCGT-32.50.5	Uncoated	3/8"	5/32"	0.173"	0.45"	0.008"	Positive	Medium	—	Chip Breakers	Sandvik Coromant	Clear Plastic Case	1	6110N193	00000	10	6110N748	000000
				DCGT-32.51	Uncoated	3/8"	5/32"	0.173"	0.44"	1/64"	Positive	Medium	—	Chip Breakers	Sandvik Coromant	Clear Plastic Case	1	6110N194	00000	10	6110N766	000000
				DCGT-32.52	Uncoated	3/8"	5/32"	0.173"	0.43"	1/32"	Positive	Medium	—	Chip Breakers	Sandvik Coromant	Clear Plastic Case	1	6110N195	00000	10	6110N773	000000

Precision Lathe Tool Insert Holders for Machining Small Parts

Insert Shown Installed

(Not Included)

Pair these holders with precision carbide inserts to cut fine details and shape small parts. Designed for use in precision lathes, also called Swiss lathes, they fit directly into a tool holder or post—no tool block needed. All are S-code holders, which means the insert is secured with a screw. They’re the most common holder used with positive-rake inserts. Also known as indexable insert holders.

Choose a holder that matches the insert style and inscribed circle diameter (IC) of your insert.

SDLC Holders—For DCET, DCGT, DCGW, DCMT, DCMW, DCMX Inserts

Right-Hand Cutting Direction—Right-hand holders move from right to left toward the lathe chuck.

	Holders											Replacement Torx Screws		Replacement Torx Keys
	Shank			For Insert			Cutting Edge Angle
	Wd.	Ht.	Overall Lg.	IC Dia.	Thk.	Material	Side	End	Mfr.		Each		Each		Each
Along-the-Length-Turning, External-Profiling Cut







				Right-Hand Cutting Direction

				1/2"	1/2"	4 3/4"	3/8"	0.156"	Steel	-3°	32°	Kyocera	9984N126	0000000	9971N132	00000	9971N135	00000


				5/8"	5/8"	4 3/4"	3/8"	0.156"	Steel	-3°	32°	Kyocera	9984N127	000000	9971N132	0000	9971N135	0000

SDNC Holders—For DCET, DCGT, DCGW, DCMT, DCMW, DCMX Inserts

Neutral Cutting Direction—Neutral holders can cut in either direction.

	Holders											Replacement Torx Screws		Replacement Torx Keys
	Shank			For Insert			Cutting Edge Angle
	Wd.	Ht.	Overall Lg.	IC Dia.	Thk.	Material	Side	End	Mfr.		Each		Each		Each
Along-the-Length-Turning, External-Profiling Cut







				Neutral Cutting Direction

				3/8"	3/8"	4 3/4"	1/4"	0.094"	Steel	-62.5°	62.5°	Kyocera	9984N128	0000000	9984N138	00000	9984N139	00000


				3/8"	3/8"	4 3/4"	3/8"	0.156"	Steel	-62.5°	62.5°	Kyocera	9984N129	000000	9971N132	0000	9971N135	0000
				1/2"	1/2"	4"	3/8"	0.156"	Steel	-62.5°	62.5°	Kyocera	9984N132	00000	9984N138	0000	9984N139	0000
				1/2"	1/2"	4 3/4"	1/4"	0.094"	Steel	-62.5°	62.5°	Kyocera	9984N131	000000	9984N138	0000	9984N139	0000
				1/2"	1/2"	4 3/4"	3/8"	0.156"	Steel	-62.5°	62.5°	Kyocera	9984N133	000000	9971N132	0000	9971N135	0000
				5/8"	5/8"	4 3/4"	3/8"	0.156"	Steel	-62.5°	62.5°	Kyocera	9984N134	000000	9971N132	0000	9971N135	0000

Lathe Tool Inserts for Stainless Steel

Heat resistant and shaped for turning stainless steel specifically, they’ll last longer than inserts for multiple materials. Install inserts into a matching holder.

DCGT (Diamond with 55° Nose Angle)—For SDJC Holders


	Individual Carbide Insert Case

For Continuous Cutting Conditions—Choose inserts for continuous cutting conditions when machining pieces that allow for constant contact between the insert and the workpiece, such as round rods.

Individual—Inserts sold individually come packed in a clear plastic case to protect cutting edges during shipment.

Package—Inserts sold in packages come factory sealed from the manufacturer for maximum traceability.

Positive Rake Angle—Positive-rake inserts stick out in front of the holder to reach tight spaces on the workpiece. However, they only have cutting edges on one side.

For Medium Cutting Operation—Medium inserts remove a moderate amount of material for a semi-smooth surface finish.

													Individual				Package
	Insert Code	Finish	IC Dia.	Thk.	Hole Dia.	Cutting Edge Lg.	Tip Radius	Rake Angle Type	For Cutting Operation	Coating Process	Features	Mfr.	Includes	Pkg. Qty.		Pkg.	Pkg. Qty.		Pkg.
For Use On Stainless Steel







				For Continuous Cutting Conditions

				DCGT-21.52	Titanium Aluminum Nitride (TiAlN) Coated	1/4"	3/32"	0.11"	0.27"	1/32"	Positive	Medium	PVD (Physical Vapor Deposition)	Chip Breakers	Sandvik Coromant	Clear Plastic Case	1	4016N159	000000	10	4016N635	0000000