McMaster-Carr logo
    Filter by
    Power Source
    Laser Color
    Number of Dots
    Battery Size
    U.S.–Mexico–Canada Agreement (USMCA) Qualifying
    DFARS Specialty Metals
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    Overall Diameter
    Batteries Included
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    98 Products

    Combination Crosshair Line and Multiple Dot Automatic Leveling Laser Levels

    Image of ProductInUse. Front orientation. Laser Levels. Combination Crosshair Line and Multiple Dot Automatic Leveling Laser Levels, 2 Dots.
    Image of ProductInUse. 5 Dots (Front View). Front orientation. Laser Levels. Combination Crosshair Line and Multiple Dot Automatic Leveling Laser Levels, 5 Dots.

    2 Dots

    5 Dots (Front View)

    Image of ProductInUse. 5 Dots (Back View). Back orientation. Laser Levels. Combination Crosshair Line and Multiple Dot Automatic Leveling Laser Levels, 5 Dots.

    5 Dots (Back View)

    Level equipment with confidence—in addition to a crosshair, these lasers also project plumb dots, so you know the laser is in the right spot. They’re an upgrade from a standard crosshair laser while remaining simpler than lasers with multiple crosshairs. Use these lasers to precisely install square elements, such as doors and windows. The crosshair extends along your wall, so you don’t have to reposition the laser often as you work around your room. If you set them on a surface, these lasers level themselves within about 4° and indicate when they are out of level. You can turn this function off when you want to make sure your crosshair is level with something other than the Earth.
    Secure them to a tripod using the threaded mount or use the strong magnetic base to attach them to equipment. They come with a magnetic target, which you can mount in your space to reflect the laser beam to increase its visibility in dim conditions and at far distances.
    2 Dots—Levels with two laser dots help you verify your installation is plumb with reference points above and below the tool. These red lasers are best for indoor environments, since they’re dimmer than green lasers.
    5 Dots—Levels with five laser dots help you verify that your tool is positioned correctly in multiple dimensions with reference points above, below, behind, and to the sides of the tool without repositioning your laser. These green lasers appear up to 10 times brighter than red lasers, so they’re easier to see outdoors or in bright indoor lighting, as well as from far away.
    No. of
    Overall
    Mounting
    Holes
    Batteries
    Max. Laser
    Distance, ft.
    Leveling and Aligning
    Accuracy
    Crosshair
    Lines
    Dots
    Laser Class
    Wavelength
    Range, nm
    Lg.
    Wd.
    Ht.
    Includes
    Mounting Fasteners
    Included
    No.
    of
    Thread Size
    Included
    Charger
    Included
    Enclosure
    Rating
    Each
    Red Laser—Disposable Battery
    165-1/8" to 1/8" @ 33 ft.12FDA Class II635 to 6504 3/8"2 1/4"4 1/4"Magnetic Target, Wall/Ceiling Mount BracketNo21/4"-20
    5/8"-11
    		Yes—IP54
    		5673N120000000
     
    Green Laser—Rechargeable Battery
    200-1/8" to 1/8" @ 50 ft.15FDA Class IIIa510 to 5305 1/4"2 1/2"5 1/4"Magnetic TargetNo21/4"-20
    5/8"-11
    		YesYesIP54
    		5673N11000000
     
    Tripods
    Image of Product. Front orientation. Tripods.
    Ht.
    For Mounting Hole
    Thread Size
    Material
    Each
    16" to 51"1/4"-20
    		Aluminum
    		4098T31000000

    Combination Six Crosshair Line Automatic Leveling Laser Levels

    Image of ProductInUse. Front orientation. Laser Levels. Combination Six Crosshair Line Automatic Leveling Laser Levels.
    No need to reposition these lasers as you work around your room—crosshairs on every surface give you all the reference points you need. They are a good choice for level, plumb, and square applications, such as aligning doors and windows on multiple walls. If you set them on a surface, they level themselves within about 4° and indicate when they are out of level. You can turn this function off when you want to make sure your crosshair is level with something other than the Earth.
    Secure them to a tripod using the threaded mount or use the strong magnetic base to attach them to equipment. They come with a magnetic target, which you can mount in your space to reflect the laser beam to increase its visibility in dim conditions and at far distances.
    Overall
    Mounting
    Holes
    Batteries
    Laser
    Color
    Leveling and Aligning
    Accuracy
    Max. Laser
    Distance, ft.
    Line Size @
    Distance
    Laser Class
    Wavelength
    Range, nm
    Lg.
    Wd.
    Ht.
    Includes
    Mount Type
    Mounting Fasteners
    Included
    No.
    of
    Thread
    Size
    Included
    Charger
    Included
    Enclosure
    Rating
    Each
    Green-1/8" to 1/8" @ 35 ft.3301/8" @ 50 ft.FDA Class II510 to 5305 1/2"2 5/8"4 1/2"Magnetic Target, Wall/Ceiling Mount BracketScrew On, Magnetic BaseYes11/4"-20
    		YesYesIP64
    		7479N110000000
    Tripods
    Image of Product. Front orientation. Tripods.
    Ht.
    For Mounting Hole
    Thread Size
    Material
    Each
    16" to 51"1/4"-20
    		Aluminum
    		4098T31000000

    Crosshair Line Automatic Leveling Laser Levels

    Image of ProductInUse. Shown with Tripod. Front orientation. Contains Annotated. Laser Levels. Crosshair Line Automatic Leveling Laser Levels.

    Shown with Tripod

    Image of Specification. Red Laser. Front orientation. Contains Border. Red Laser. Crosshair Line Automatic Leveling Laser Levels.

    Red

    Laser

    Image of Specification. Green Laser. Front orientation. Contains Border. Green Laser. Crosshair Line Automatic Leveling Laser Levels.

    Green

    Laser

    Project two intersecting lines to ensure equipment is level and plumb. Set these laser levels on any surface and they'll level themselves within about 4°. They’re often used to align bench tops in shops and labs.
    Red Laser—Red lasers are dimmer than green lasers, so they’re best viewed indoors. Use the included tripod to position them up to 46” high.
    Green Laser—Green lasers appear up to 10 times brighter than red lasers, so they can be used from farther distances and in brightly lit areas, including outdoors. Use the included magnetic target to make your laser beam easier to see from a distance. They have a magnetic base and can be affixed to flat surfaces when mounting holes are not available.
    Overall
    Mounting
    Holes
    Batteries
    Max. Laser
    Distance, ft.
    Leveling and Aligning
    Accuracy
    Line Size @
    Distance
    Laser Class
    Wavelength,
    nm
    Lg.
    Wd.
    Ht.
    Includes
    Mount Type
    Mounting Fasteners
    Included
    No.
    of
    Thread
    Size
    Magnet
    Material
    Included
    No.
    Req.
    Type
    Size
    Voltage,
    V DC
    Enclosure
    Rating
    Container
    Type
    Each
    Red Laser
    100-1/4" to 1/4" @ 35 ft.1/8" @ 50 ft.FDA Class IIIa625 to 6454"3 1/2"5"TripodScrew OnNo15/8"-11
    		—No3DisposableAAA—IP54
    		Carrying Case4098T260000000
     
    Green Laser
    125-1/8" to 1/8" @ 35 ft.1/8" @ 50 ft.FDA Class II510 to 5305"2 3/4"4 1/2"Magnetic TargetScrew On, Magnetic BaseYes11/4"-20
    		NeodymiumYes1Rechargeable—3.7IP64
    		Carrying Case4098T12000000
     
    Tripods
    Image of Product. Front orientation. Tripods.
    Add a tripod to adjust the height of the green lasers between 16" and 51".
    Ht.
    For Mounting Hole
    Thread Size
    Material
    Each
    16" to 51"1/4"-20
    		Aluminum
    		4098T31000000

    Alignment Lasers

    Image of Product. Front orientation. Alignment Lasers. Alignment Lasers, Battery Powered—Dot.
    Image of Product. Front orientation. ZoomedIn view. Contains Annotated. Alignment Lasers. Alignment Lasers, Electric—Dot.

    Battery Powered—Dot

    Electric—Dot

    Image of Product. Front orientation. Alignment Lasers. Alignment Lasers, Electric—Line.
    Image of Product. Front orientation. Alignment Lasers. Alignment Lasers, Electric—Crosshair Line.

    Electric—Line

    Electric—Crosshair Line

    Project a bright, vivid reference point to hang light fixtures, align workbenches, or even guide your machine vision camera. These lasers are small enough to fit on virtually any machine.
    Battery Powered—Dot
    Image of Product. Front orientation. Alignment Lasers. Alignment Lasers, Battery Powered—Dot.
    Image of Specification. Front orientation. Fastener Mount. Alignment Lasers, Battery Powered—Dot, Magnet Mount.
    Image of Specification. Front orientation. Magnetic. Alignment Lasers, Stud-Anchor Mount, Screw On.

    Magnet/Fastener Mount

    Magnetic/Screw

    On/Stud-Anchor Mount

    Dot lasers work well for indicating a drill point and positioning workpieces on lathes, presses, and CNC machines. Those with multiple dot sizes are suitable for both long-range positioning and close-up precision tasks. Larger dot sizes are often used to install pipe over long distances. Twist the head to adjust the dot size.
    Red Laser—Red lasers are best viewed indoors and at short distances.
    Green Laser—Green lasers are ten times brighter than red lasers. They’re easy to view, even in brightly lit rooms, outdoor locations, and over long distances.
    Overall
    Batteries
    Max. Laser
    Distance, ft.
    Leveling and Aligning
    Accuracy
    Dot Size @ Distance
    Laser Class
    Wavelength,
    nm
    Lg.
    Dia.
    Lens
    Material
    Temp.,
    ° F
    Included
    No.
    Required
    Chemistry
    Size
    Includes
    Each
    Red Laser
    500-1/16" to 1/16" @ 100 ft.1/16" @ 2 ft.
    3/4" @ 50 ft.    		FDA Class IIIa6503 3/4"3/4"Glass32 to 90No1Lithium123Adjustment Screws7112N140000000
     
    Green Laser
    5,000-1/16" to 1/16" @ 100 ft.1/32" @ 2 ft.
    1/4" @ 50 ft.    		FDA Class IIIa5326 1/2"1"Glass32 to 90No1Lithium123Adjustment Screws7112N12000000
     
    Laser Mounts
    Magnetic/Screw On/Stud-Anchor Mount—Magnetic/screw on/stud-anchor mounts help you check whether shafts, spindles, and other rotating parts are perfectly aligned with equipment. Mount them to the face of your rotating part so your laser shines directly at an opposite surface. If the laser moves in a circle instead of staying still, your rotating part is off-center. Attach the mount to your equipment using the magnetic base or mounting holes. You can also use the included stud to insert these mounts into a chuck.
    For Laser
    Class
    Ht.
    Dia.
    Material
    Pivot
    Angle
    Tilt Range
    of Motion
    Each
    Magnet/Fastener Mount
    FDA Class IIIa4 3/4"3"Plastic-Coated ABS/Plastic-Coated Stainless Steel360°180°20005A540000000
     
    Magnetic/Screw On/Stud-Anchor Mount
    FDA Class IIIa5 1/4"4 1/2"Plastic-Coated Stainless Steel10°—6768N13000000
     
    Electric—Dot
    Image of Product. Front orientation. ZoomedIn view. Contains Annotated. Alignment Lasers. Alignment Lasers, Electric—Dot.
    Image of Specification. Magnet/Fastener Mount for FDA Class II Laser. Front orientation. Fastener Mount. Alignment Lasers, Electric—Dot, Magnet Mount, For FDA Class II Laser Class.
    Image of Specification. Magnet/Fastener Mount for FDA Class IIIa Laser. Front orientation. Fastener Mount. Alignment Lasers, Electric—Dot, Magnet Mount, For FDA Class IIIa Laser Class.

    Magnet/Fastener

    Mount for FDA

    Class II Laser

    Magnet/Fastener Mount

    for FDA Class IIIa Laser

    Image of Specification. Magnetic/Fastener Mount for FDA Class IIIb Laser. Front orientation. Fastener Mount. Alignment Lasers, Electric—Dot, Magnet Mount, For FDA Class IIIb Laser Class.
    Image of Specification. Front orientation. Clamp Mount. Alignment Lasers.

    Magnetic/Fastener

    Mount for FDA

    Class IIIb Laser

    Clamp Mount

    Dot lasers work well for indicating a drill point and positioning workpieces on lathes, presses, and CNC machines. Those with multiple dot sizes are suitable for both long-range positioning and close-up precision tasks. Larger dot sizes are often used to install pipe over long distances. Twist the head to adjust the dot size.
    Red Laser—Red lasers are best viewed indoors and at short distances.
    Green Laser—Green lasers are ten times brighter than red lasers. They’re easy to view, even in brightly lit rooms, outdoor locations, and over long distances.
    5V DC—To power 5V DC lasers from an outlet, fit the barrel connector into an adapter. 5V lasers can also be used with a power distribution block, which lets you power up to seven lasers from an outlet using a single adapter.
    8V DC—To power 8V DC lasers from an outlet, fit the barrel connector into an adapter.
    DC—DC lasers can be hardwired to programmable logic controllers (PLCs) and timer relays, so you can automate when they turn on and off.
    Barrel Connection— For lasers with a barrel connector, you must cut off the connector to hardwire them.
    Overall
    Electrical
    Max. Laser
    Distance, ft.
    Leveling and Aligning
    Accuracy
    Dot Size @ Distance
    Laser Class
    Wavelength,
    nm
    Lg.
    Dia.
    Lens
    Material
    Temp.,
    ° F
    Connection
    No. of
    Blades
    Cord Lg.,
    ft.
    NEMA
    Type
    Includes
    Each
    Red Laser—5V DC
    100Not Rated1/32" @ 2 ft.FDA Class II6251 1/2"7/16"Plastic15 to 1202.5 mm ID Barrel—1——2073A110000000
     
    Red Laser—120V AC
    500-1/16" to 1/16" @ 100 ft.1/16" @ 2 ft.
    3/4" @ 50 ft.    		FDA Class IIIa6503 3/4"3/4"Glass32 to 90Straight Blade261-15
    		AC Adapter, Adjustment Screws7112N13000000
    1,000-1/16" to 1/16" @ 100 ft.3/8" @ 2 ft.FDA Class IIIa6503 3/4"3/4"Glass32 to 90Straight Blade261-15
    		AC Adapter7180N11000000
     
    Green Laser—8V DC
    5Not Rated3/32" @ 2 ft.FDA Class IIIb5152"1/2"Glass32 to 952.5 mm ID Barrel—1——2073A14000000
     
    Green Laser—120V AC
    5,000-1/16" to 1/16" @ 100 ft.1/32" @ 2 ft.
    1/4" @ 50 ft.    		FDA Class IIIa5326 1/2"1"Glass32 to 90Straight Blade261-15
    		AC Adapter, Adjustment Screws7112N11000000
     
    Accessories for Alignment Lasers
    Laser Mounts
    Clamp Mount—Clamp mounts fit pipe, tube, and conduit that is approximately 1" in diameter. They swivel from side to side, so you can fine-tune the position of the laser once it's mounted.
    Magnet/Fastener Mount—Magnet/fastener mounts attach to steel surfaces, so you don't have to drill holes in your machinery. They’ll hold the laser at a fixed angle.
    80° Pivot Angle—These mounts pivot 80°, so you can aim your laser without shifting the entire mount.
    For Laser Class
    Lg.
    Wd.
    Ht.
    Dia.
    Material
    Pivot
    Angle
    Tilt Range
    of Motion
    Each
    Clamp Mount
    FDA Class II3/4"2"2.4"—Anodized Aluminum——2073A320000000
     
    Magnet/Fastener Mount
    FDA Class II, IEC Class 1M0.88"2"1.89"—Anodized Aluminum—80°2073A17000000
    FDA Class IIIa——4 3/4"3"Plastic-Coated ABS/Plastic-Coated Stainless Steel360°180°20005A54000000
    FDA Class IIIb2"1/2"1.89"—Anodized Aluminum80°80°2073A18000000
     
    Plug-In Adapters
    Image of Product. Front orientation. Power Supplies. Alignment Lasers, .

    Voltage
    Electrical
    For Laser
    Voltage, V DC
    Input,
    V AC
    Output,
    V DC
    For Max. No.
    of Lasers
    Connection
    No. of
    Blades
    Cord Lg.,
    ft.
    NEMA
    Type
    Each
    512051Straight Blade241-15
    		2073A33000000
    812081Straight Blade241-15
    		2073A1500000
    Power Distribution Blocks
    Image of Product. Front orientation. Power Supplies. Alignment Lasers, .

    Connection
    Type
    For Laser
    Voltage, V DC
    For Max. No.
    of Lasers
    Input
    Output
    Each
    572.5 mm Barrel2.5 mm Barrel2073A340000000
    Electric—Line
    Image of Product. Front orientation. Alignment Lasers. Alignment Lasers, Electric—Line.
    Image of Specification. Front orientation. Fastener Mount. Alignment Lasers, Electric—Line.
    Image of Specification. Front orientation. Magnet Mount. Alignment Lasers, Electric—Line.
    Image of Specification. Front orientation. Fastener Mount. Alignment Lasers, Electric—Line, Magnet Mount.

    Fastener

    Mount

    Magnet

    Mount

    Magnet/Fastener

    Mount

    Line lasers work well for marking cut lines for saws, aligning rollers on conveyor belts, and checking that the edge on a machined part is straight. They project a line that is even and bright the entire length.
    Red Laser—Red lasers are best viewed indoors and at short distances.
    Green Laser—Green lasers are ten times brighter than red lasers. They’re easy to view, even in brightly lit rooms, outdoor locations, and over long distances.
    5V DC—To power 5V DC lasers from an outlet, fit the barrel connector into an adapter. 5V lasers can also be used with a power distribution block, which lets you power up to seven lasers from an outlet using a single adapter.
    DC—DC lasers can be hardwired to programmable logic controllers (PLCs) and timer relays, so you can automate when they turn on and off.
    Barrel Connection— For lasers with a barrel connector, you must cut off the connector to hardwire them.
    Overall
    Electrical
    Max. Laser
    Distance, ft.
    Leveling and Aligning
    Accuracy
    No. of
    Lines
    Line Size @
    Distance
    Laser Class
    Wavelength,
    nm
    Lg.
    Dia.
    Lens
    Material
    Temp.,
    ° F
    Connection
    No. of
    Blades
    Cord Lg.,
    ft.
    Enclosure
    Rating
    NEMA
    Type
    Includes
    Each
    Red Laser—5V DC
    10Not Rated119 1/2 ft. @ 10 ft.IEC Class 1M6251 7/8"7/16"Plastic15 to 1202.5 mm ID Barrel—1———2073A210000000
     
    Green Laser—12V DC
    150Not Rated111 1/2 ft. @ 10 ft.FDA Class IIIa5204"3/4"Glass0 to 140Hardwire—5IP67
    		—Fastener Mount6902N12000000
     
    Green Laser—120V AC
    150Not Rated111 1/2 ft. @ 10 ft.FDA Class IIIa5204"3/4"Glass0 to 140Straight Blade25IP67
    		1-15
    		AC Adapter, Fastener Mount6902N11000000
     
    Accessories for Alignment Lasers
    Laser Mounts
    Fastener Mount—Fastener mounts rotate in any direction, so you can swivel the laser to the correct angle for your job without having to reposition the entire mount.
    Magnet Mount—Magnet mounts attach to steel surfaces, so you don't have to drill holes in your machinery. They’ll hold the laser at a fixed angle.
    Magnet/Fastener Mount—Magnet/fastener mounts attach to steel surfaces, so you don't have to drill holes in your machinery. They’ll hold the laser at a fixed angle.
    For Laser Class
    Lg.
    Wd.
    Ht.
    Material
    Tilt Range
    of Motion
    Each
    Magnet/Fastener Mount
    FDA Class II, IEC Class 1M0.88"2"1.89"Anodized Aluminum80°2073A170000000
     
    Fastener Mount
    FDA Class IIIa1"1"3 1/2"Aluminum360°5198T9100000
     
    Magnet Mount
    FDA Class IIIa1"1"1 1/2"Aluminum360°5198T92000000
     
    Plug-In Adapters
    Image of Product. Front orientation. Power Supplies. Alignment Lasers, .

    Voltage
    Electrical
    For Laser
    Voltage, V DC
    Input,
    V AC
    Output,
    V DC
    For Max. No.
    of Lasers
    Connection
    No. of
    Blades
    Cord Lg.,
    ft.
    NEMA
    Type
    Each
    512051Straight Blade241-15
    		2073A33000000
    Power Distribution Blocks
    Image of Product. Front orientation. Power Supplies. Alignment Lasers, .

    Connection
    Type
    For Laser
    Voltage, V DC
    For Max. No.
    of Lasers
    Input
    Output
    Each
    572.5 mm Barrel2.5 mm Barrel2073A340000000
    Electric—Crosshair Line
    Image of Product. Front orientation. Alignment Lasers. Alignment Lasers, Electric—Crosshair Line.
    Image of Specification. Front orientation. Magnet Mount. Alignment Lasers, Electric—Crosshair Line.

    Magnet

    Mount

    Crosshair line lasers project a central reference point, as well as vertical and horizontal lines, so you don't have to reposition the laser when aligning in multiple directions. They are commonly used to position shafts, bearings, and couplings.
    Red Laser—Red lasers are best viewed indoors and at short distances.
    Green Laser—Green lasers are ten times brighter than red lasers. They’re easy to view, even in brightly lit rooms, outdoor locations, and over long distances.
    DC—DC lasers can be hardwired to programmable logic controllers (PLCs) and timer relays, so you can automate when they turn on and off.
    Barrel Connection— For lasers with a barrel connector, you must cut off the connector to hardwire them.
    Overall
    Max. Laser
    Distance, ft.
    Leveling and Aligning
    Accuracy
    Line Size @
    Distance
    Laser Class
    Wavelength,
    nm
    Lg.
    Dia.
    Lens
    Material
    Temp.,
    ° F
    Connection Type
    Cord Lg.,
    ft.
    Includes
    Each
    Red Laser—4.5V DC
    50Not Rated4 1/4 ft. @ 10 ft.FDA Class II6354"3/4"Glass15 to 1202.1 mm ID Barrel3AC Adapter7180N130000000
     
    Green Laser—4.5V DC
    50Not Rated4 1/4 ft. @ 10 ft.FDA Class II5234"3/4"Glass15 to 1202.1 mm ID Barrel3AC Adapter7180N14000000
     
    Laser Mounts
    Magnet Mount—Magnet mounts attach to steel surfaces, so you don't have to drill holes in your machinery. They’ll hold the laser at a fixed angle.
    For Laser
    Class
    Lg.
    Wd.
    Ht.
    Material
    Pivot
    Angle
    Tilt Range
    of Motion
    Each
    Magnet Mount
    FDA Class II1 1/2"1 1/2"2 1/2"Anodized Aluminum90°180°2073A44000000
     

    360° Sweeping-Line Automatic Leveling Laser Levels

    Image of Product. Front orientation. Contains Annotated. Laser Levels. 360° Sweeping-Line Automatic Leveling Laser Levels, Magnetic Target.

    Magnetic Target

    Set these lasers on any surface and they’ll level themselves horizontally within about 4°. They emit a beam of light 360° around the base, so you won’t have to keep repositioning them as you move around a space. Use them to align machinery, install conveyors, and check if walls are plumb. Visual and audible alarms alert you when the laser is beyond its leveling range. Adjust their vertical position manually. Mount these lasers to a tripod (not included) to level at a greater range of heights.
    Green Laser—Green lasers are four times brighter than red lasers, so you can see the beam outdoors and in bright lighting. They’re also easier to spot from far away. These lasers include a magnetic target, which you can mount at the height you need to reflect the beam, making it brighter and easier to see from a distance.
    Size
    Overall
    Mounting
    Holes
    Batteries
    No. of
    Dots
    Max. Laser
    Distance, ft.
    Leveling and Aligning
    Accuracy
    Dot @
    Distance
    Line @
    Distance
    Laser Class
    Wavelength,
    nm
    No. of Rotational
    Speeds
    Lg.
    Wd.
    Ht.
    Includes
    Mount
    Type
    Mounting Fasteners
    Included
    No.
    of
    Thread
    Size
    Included
    No.
    Req.
    Each
    Green Laser
    1400-3/16" to 3/16" @ 100 ft.1/2" @ 50 ft.3/8" @ 100 ft.FDA Class IIIa510 to 53047 1/8"6 3/8"8"Magnetic Target, Remote Control, Wall/Ceiling Mount BracketScrew OnNo25/8"-11
    		Yes119985A11000000000
     

    Laser Squares

    Image of Product. Front orientation. Squares. Laser Squares.
    Lay out machine tables and work stations at precise right angles. This laser generates two red lines that form a 90° angle. The laser lines are best viewed indoors.
    Overall
    No. of Vials
    Angle
    Measured
    Leveling and Aligning
    Accuracy
    Max. Laser
    Distance, ft.
    Line Size @
    Distance
    Laser Class
    Lg.
    Wd.
    Ht.
    Horizontal
    Vertical
    Sensitivity
    Batteries
    Included
    Features
    Each
    Inch
    0° to 90°-1/4" to 1/4" @ 20 ft.230.1" @ 20 ft.FDA Class II6 1/2"6 1/2"2"110.004"/1 ft., 1 min/0.1"YesBuilt-In Protractor2019A35000000
     

    Chuck-Mount Alignment Lasers

    Image of Product. Top orientation. Alignment Lasers. Chuck-Mount Alignment Lasers, Battery Powered—Dot.
    Image of Product. Top orientation. Alignment Lasers. Chuck-Mount Alignment Lasers, Battery Powered—Crosshair Line.

    Battery

    Powered—Dot

    Battery

    Powered—Crosshair

    Line

    Mount these lasers into a chuck on your milling machine or drill press to precisely indicate the drilling point. They project either a red dot or crosshair and are best viewed indoors.
    Battery Powered—Dot
    Image of Product. Top orientation. Alignment Lasers. Chuck-Mount Alignment Lasers, Battery Powered—Dot.
    Magnetic Holders—Magnetic holders store lasers when they’re not in use.
    Alignment Lasers
    Magnetic Holders
    Overall
    Batteries
    For Min.
    Chuck Cap.
    Max. Laser
    Distance, ft.
    Leveling and Aligning
    Accuracy
    Dot Size @ Distance
    Laser
    Class
    Wavelength,
    nm
    Lg.
    Dia.
    Included
    No.
    Required
    Mfr. Equiv.
    No.
    Type
    Each
    Each
    Red Laser
    1/4"1-0.001" to 0.001" @ 12"0.002" @ 1"
    0.004" @ 12"    		FDA Class I640 to 6603"3/4"Yes3LR44Disposable2035A700000002035A12000000
     
    Battery Powered—Crosshair Line
    Image of Product. Top orientation. Alignment Lasers. Chuck-Mount Alignment Lasers, Battery Powered—Crosshair Line.
    Cross-hair line lasers project two intersecting lines for aligning workpieces on tables. They’re easier to see than a dot.
    Magnetic Holders—Magnetic holders store lasers when they’re not in use.
    Alignment Lasers
    Magnetic Holders
    Overall
    Batteries
    For Min.
    Chuck Cap.
    Max. Laser
    Distance, ft.
    Leveling and Aligning
    Accuracy
    Line Size @ Distance
    Laser
    Class
    Wavelength,
    nm
    Lg.
    Dia.
    Included
    No.
    Required
    Mfr. Equiv.
    No.
    Type
    Each
    Each
    Red Laser
    1/4"1-0.001" to 0.001" @ 12"0.002" @ 1"
    0.002" @ 12"    		FDA Class I640 to 6603"3/4"Yes3LR44Disposable2035A1100000002035A12000000
     

    Compact Machine-Mount Alignment Lasers

    Image of Product. Front orientation. Alignment Lasers. Compact Machine-Mount Alignment Lasers.
    Even with their built-in mount, these lasers only take up as much space as two dice. Use them to project a bright, vivid reference point to align tools or guide machine vision cameras and robots. Since you can adjust their dot size, these lasers work well for both long-range positioning and close-up precision tasks. Larger dot sizes are often used to install pipe over long distances. The dot is red, so it’s best viewed indoors.
    Electric—Dot
    Overall
    Electrical
    Mounting
    Holes
    Max. Laser
    Distance, ft.
    Leveling and Aligning
    Accuracy
    Dot Size @ Distance
    Laser Class
    Wavelength,
    nm
    Lg.
    Wd.
    Ht.
    Connection
    No. of
    Blades
    Cord Lg.,
    ft.
    Mount
    Type
    Mounting Fasteners
    Included
    No.
    of
    Dia.
    Features
    NEMA
    Type
    Includes
    Each
    Red Laser—120V AC
    500-1/8" to 1/8" @ 130 ft.1/16" @ 2 ft.
    2 1/2" @ 500 ft.    		FDA Class IIIa6501 1/4"1"1 3/16"Straight Blade26Screw OnNo81/8"Encased Diode1-15
    		AC Adapter2055A210000000
     
    Laser Converters
    Image of Product. Front orientation. Laser Converters. 90° Beam Splitters.
    Image of Product. Front orientation. Laser Converters. Dot-to-Crosshair Converters.
    Image of Product. Front orientation. Laser Converters. Dot-to-Dotted Line Converters.
    Image of Product. Front orientation. Laser Converters. Dot-to-Line Converters.

    90° Beam Splitters

    Dot-to-Crosshair

    Converters

    Dot-to-Dotted

    Line Converters

    Dot-to-Line

    Converters

    Component
    Line Size @
    Distance
    Dotted Line Size
    @ Distance
    Crosshair Size
    @ Distance
    Each
    90° Beam Splitter———20005A1150000000
    Dot-to-Crosshair Converter——2 1/4" @ 1 ft.20005A33000000
    Dot-to-Dotted Line Converter—2" @ 1 ft.—20005A112000000
    Dot-to-Line Converter6" @ 1 ft.——20005A11600000
    Dot-to-Line Converter8" @ 1 ft.——20005A11300000
    Dot-to-Line Converter12" @ 1 ft.——20005A32000000
    Dot-to-Line Converter16" @ 1 ft.——20005A11400000
    Dot-to-Line Converter28" @ 1 ft.——20005A11100000

    Dust- and Moisture-Resistant Alignment Lasers

    Image of Product. Front orientation. Alignment Lasers. Dust- and Moisture-Resistant Alignment Lasers, Battery Powered—Dot.
    Image of Product. Front orientation. Alignment Lasers. Dust- and Moisture-Resistant Alignment Lasers, Electric—Dot.
    Image of Product. Front orientation. Alignment Lasers. Dust- and Moisture-Resistant Alignment Lasers, Electric—Line.

    Battery Powered—Dot

    Electric—Dot

    Electric—Line

    IP67 rated, these lasers have a lens that's sealed to keep out dust and water. They're often used to create reference points for machine vision cameras and robots.
    Battery Powered—Dot
    Image of Product. Front orientation. Alignment Lasers. Dust- and Moisture-Resistant Alignment Lasers, Battery Powered—Dot.
    Image of Specification. Front orientation. Fastener Mount. Dust- and Moisture-Resistant Alignment Lasers, Battery Powered—Dot.
    Image of Specification. Front orientation. Magnet Mount. Dust- and Moisture-Resistant Alignment Lasers, Battery Powered—Dot.

    Fastener

    Mount

    Magnet

    Mount

    Dot lasers work well for indicating a drill point and positioning workpieces on lathes, presses, and CNC machines.
    Red Laser—Red lasers are best viewed indoors and at short distances.
    Green Laser—Green lasers are ten times brighter than red lasers. They’re easy to view, even in brightly lit rooms, outdoor locations, and over long distances.
    Overall
    Batteries
    Max. Laser
    Distance, ft.
    Leveling and Aligning
    Accuracy
    Dot Size @
    Distance
    Laser Class
    Wavelength,
    nm
    Lg.
    Dia.
    Enclosure
    Rating
    No. of Horiz.
    Vials
    Sensitivity
    Included
    No.
    Required
    Chemistry
    Size
    Type
    Each
    Red Laser
    500-1/8" to 1/8" @ 100 ft.3/8" @ 100 ft.FDA Class IIIa6356 1/2"3/4"IP67
    		10.003"/1 ft., 0 min/0.1"Yes2AlkalineAAADisposable5198T520000000
     
    Green Laser
    500-1/8" to 1/8" @ 100 ft.1/4" @ 100 ft.FDA Class IIIa5326 1/2"3/4"IP67
    		10.003"/1 ft., 0 min/0.1"Yes2AlkalineAAADisposable5198T53000000
     
    Accessories for Alignment Lasers
    Laser Mounts
    Fastener Mount—Fastener mounts rotate in any direction, so you can swivel the laser to the correct angle for your job without having to reposition the entire mount.
    Magnet Mount—Magnet mounts attach to steel surfaces, so you don't have to drill holes in your machinery. They’ll hold the laser at a fixed angle.
    For Laser
    Class
    Lg.
    Wd.
    Ht.
    Material
    Tilt Range
    of Motion
    Each
    Fastener Mount
    FDA Class IIIa1"1"3 1/2"Aluminum360°5198T91000000
     
    Magnet Mount
    FDA Class IIIa1"1"1 1/2"Aluminum360°5198T92000000
     
    Laser Converters
    Image of Product. Front orientation. Laser Converters. Dust- and Moisture-Resistant Alignment Lasers, Dot Size Converters.
    Image of Product. Front orientation. Laser Converters. Dust- and Moisture-Resistant Alignment Lasers, Dot-to-Line Converters.

    Dot Size

    Converters

    Dot-to-Line

    Converters

    Component
    Includes
    Dotted Line Size
    @ Distance
    Each
    Dot Size ConverterOne Size-Converting Lens for 1/16" Dot Size
    One Size-Converting Lens for 1/8" Dot Size
    One Size-Converting Lens for 3/32" Dot Size    		—5198T86000000
    Dot-to-Line Converter—2 ft. @ 18 ft.5198T85000000
    Electric—Dot
    Image of Product. Front orientation. Alignment Lasers. Dust- and Moisture-Resistant Alignment Lasers, Electric—Dot.
    Image of Specification. Front orientation. Fastener Mount. Dust- and Moisture-Resistant Alignment Lasers, Electric—Dot.
    Image of Specification. Front orientation. Magnet Mount. Dust- and Moisture-Resistant Alignment Lasers, Electric—Dot.

    Fastener

    Mount

    Magnet

    Mount

    Dot lasers work well for indicating a drill point and positioning workpieces on lathes, presses, and CNC machines.
    Red Laser—Red lasers are best viewed indoors and at short distances.
    Green Laser—Green lasers are ten times brighter than red lasers. They’re easy to view, even in brightly lit rooms, outdoor locations, and over long distances.
    DC—Hardwire DC lasers to programmable logic controllers (PLCs) and timer relays to automate when they turn on and off.
    Overall
    Electrical
    Max. Laser
    Distance, ft.
    Leveling and Aligning
    Accuracy
    Dot Size @
    Distance
    Laser Class
    Wavelength,
    nm
    Lg.
    Dia.
    Connection
    No. of
    Blades
    Cord Lg.,
    ft.
    Enclosure
    Rating
    NEMA
    Type
    Includes
    Each
    Red Laser—4.8V DC to 36V DC
    500-1/8" to 1/8" @ 100 ft.3/8" @ 100 ft.FDA Class IIIa6353 1/4"3/4"Hardwire——IP67
    		——5198T720000000
     
    Red Laser—120V AC
    500-1/8" to 1/8" @ 100 ft.3/8" @ 100 ft.FDA Class IIIa6353 1/4"3/4"Straight Blade25IP67
    		1-15
    		AC Adapter5198T71000000
     
    Green Laser—12V DC to 24V DC
    500-1/8" to 1/8" @ 100 ft.1/4" @ 100 ft.FDA Class IIIa5204"3/4"Hardwire——IP67
    		——5198T55000000
     
    Green Laser—120V AC
    500-1/8" to 1/8" @ 100 ft.3/8" @ 100 ft.FDA Class IIIa5324"3/4"Straight Blade25IP67
    		1-15
    		AC Adapter5198T54000000
     
    Accessories for Alignment Lasers
    Laser Mounts
    Fastener Mount—Fastener mounts rotate in any direction, so you can swivel the laser to the correct angle for your job without having to reposition the entire mount.
    Magnet Mount—Magnet mounts attach to steel surfaces, so you don't have to drill holes in your machinery. They’ll hold the laser at a fixed angle.
    For Laser
    Class
    Lg.
    Wd.
    Ht.
    Material
    Tilt Range
    of Motion
    Each
    Fastener Mount
    FDA Class IIIa1"1"3 1/2"Aluminum360°5198T91000000
     
    Magnet Mount
    FDA Class IIIa1"1"1 1/2"Aluminum360°5198T92000000
     
    Laser Converters
    Image of Product. Front orientation. Laser Converters. Dust- and Moisture-Resistant Alignment Lasers, Dot Size Converters.
    Image of Product. Front orientation. Laser Converters. Dust- and Moisture-Resistant Alignment Lasers, Dot-to-Line Converters.

    Dot Size

    Converters

    Dot-to-Line

    Converters

    Component
    Includes
    Dotted Line Size
    @ Distance
    Each
    Dot Size ConverterOne Size-Converting Lens for 1/16" Dot Size
    One Size-Converting Lens for 1/8" Dot Size
    One Size-Converting Lens for 3/32" Dot Size    		—5198T86000000
    Dot-to-Line Converter—2 ft. @ 18 ft.5198T85000000
    Electric—Line
    Image of Product. Front orientation. Alignment Lasers. Dust- and Moisture-Resistant Alignment Lasers, Electric—Line.
    Image of Specification. Front orientation. Fastener Mount. Dust- and Moisture-Resistant Alignment Lasers, Electric—Line.

    Fastener

    Mount

    Line lasers work well for marking cut lines for saws, aligning rollers on conveyor belts, and checking that the edge on a machined part is straight. They project a line that is even and bright along the entire length.
    Red Laser—Red lasers are best viewed indoors and at short distances.
    Green Laser—Green lasers are ten times brighter than red lasers. They’re easy to view, even in brightly lit rooms, outdoor locations, and over long distances.
    5V DC—For 5V DC lasers, you'll need to cut off their plug to hardwire them. Their plug fits into an AC adapter.
    8V DC—For 8V DC lasers, you'll need to cut off their plug to hardwire them. Their plug fits into an AC adapter.
    DC—Hardwire DC lasers to programmable logic controllers (PLCs) and timer relays to automate when they turn on and off.
    Overall
    Max. Laser
    Distance, ft.
    No. of
    Lines
    Line Size @
    Distance
    Laser Class
    Wavelength,
    nm
    Lg.
    Dia.
    Connection Type
    Cord Lg.,
    ft.
    Enclosure
    Rating
    Each
    Red Laser—5V DC
    512 1/2 ft. @ 5 ft.FDA Class IIIb6354 1/2"3/4"2.5 mm ID Barrel4IP67
    		5198T17000000000
     
    Green Laser—8V DC
    512 1/2 ft. @ 5 ft.FDA Class IIIb5204 1/2"3/4"2.5 mm ID Barrel4IP67
    		5198T1800000000
     
    Accessories for Alignment Lasers
    Laser Mounts
    Fastener Mount—These mounts tilt up to 34°, so you can make minor adjustments to the laser angle without repositioning the entire mount.
    For Laser
    Class
    Lg.
    Wd.
    Ht.
    Material
    Tilt Range
    of Motion
    Each
    Fastener Mount
    FDA Class IIIb2 1/2"1"2 1/2"Anodized Aluminum34°2073A160000000
     
    Plug-In Adapters
    Image of Product. Front orientation. Power Supplies. Dust- and Moisture-Resistant Alignment Lasers, .

    Voltage
    Electrical
    For Laser
    Voltage, V DC
    Input,
    V AC
    Output,
    V DC
    For Max. No.
    of Lasers
    Connection
    No. of
    Blades
    Cord Lg.,
    ft.
    NEMA
    Type
    Each
    512051Straight Blade241-15
    		2073A33000000
    812081Straight Blade241-15
    		2073A1500000

    High-Temperature Alignment Lasers

    Image of ProductInUse. Front orientation. Contains Annotated. Alignment Lasers. High-Temperature Alignment Lasers.
    These lasers project a bright, accurate reference point while resisting heat from furnaces, kilns, and other machinery that runs hot. Use them for everything from aligning bores, rods, and other components in engines to marking workpieces for spot welds. The glass lens won’t warp or melt like a plastic one might, so the dot stays precise and clear.
    Lasers project a red light that is best viewed indoors. They aren't adjustable, so the dot will get bigger as you move the laser further away. These lasers have a plug that fits into an included AC adapter, but they can also be hardwired by cutting off the plug. Hardwire them to programmable logic controllers (PLCs) and timer relays to automate when they turn on and off.
    Electric—Dot
    Overall
    Max. Laser
    Distance, ft.
    Dot Size @
    Distance
    Laser Class
    Wavelength,
    nm
    Lg.
    Dia.
    Temp.,
    ° F
    Connection Type
    Cord Lg.,
    ft.
    Enclosure
    Rating
    NEMA
    Type
    Each
    Red Laser—5V DC
    52 3/4" @ 2 ft.FDA Class IIIb6605 1/2"3/4"60 to 1752.5 mm ID Barrel2IP67
    		1-15
    		6771N11000000000
     
    Accessories and Replacements for Alignment Lasers
    Laser Mounts
    Image of Specification. Front orientation. Fastener Mount. High-Temperature Alignment Lasers, Electric—Dot.

    Fastener

    Mount

    These mounts tilt up to 34°, so you can make minor adjustments to the laser angle without repositioning the entire mount.
    For Laser
    Class
    Lg.
    Wd.
    Ht.
    Material
    Tilt Range
    of Motion
    Each
    Fastener Mount
    FDA Class IIIb2 1/2"1"2 1/2"Anodized Aluminum34°2073A160000000
     
    Plug-In Adapters
    Image of Product. Front orientation. Power Supplies. High-Temperature Alignment Lasers.
    Voltage
    Electrical
    For Laser
    Voltage, V DC
    Input,
    V AC
    Output,
    V DC
    For Max. No.
    of Lasers
    Connection
    No. of
    Blades
    Cord Lg.,
    ft.
    NEMA
    Type
    Each
    512051Straight Blade241-15
    		2073A33000000

    Pocket-Sized Pulley Alignment Lasers

    Image of ProductInUse. Front orientation. Alignment Lasers. Pocket-Sized Pulley Alignment Lasers.
    Image of Product. Front orientation. Alignment Lasers. Pocket-Sized Pulley Alignment Lasers, Style A—Battery Powered—Dot.
    Image of Product. Front orientation. Alignment Lasers. Pocket-Sized Pulley Alignment Lasers, Style B—Battery Powered—Dot.

    Style A—Battery

    Powered—Dot

    Style B—Battery

    Powered—Dot

    Slip this laser into your pocket so it's on hand to align belts, pulleys, chain, and sprockets. Place the tool against the side of your pulley or sprocket and project the laser onto the included target to detect angular or offset misalignment. They mount magnetically, so you don’t need any fasteners to secure them. The surface of the laser is machined, so it sits flush against flat surfaces for easy and precise alignment. They’re powered by a disposable battery, so they’re portable.
    Style A—Battery Powered—Dot
    Image of Product. Front orientation. Alignment Lasers. Pocket-Sized Pulley Alignment Lasers, Style A—Battery Powered—Dot.
    Overall
    Batteries
    For Max. Pulley
    Spacing, ft.
    Max. Laser
    Distance, ft.
    Leveling and Aligning
    Accuracy
    Dot Size @
    Distance
    Laser Class
    Wavelength,
    nm
    Tolerance
    per ft.
    Lg.
    Wd.
    Ht.
    Mount Type
    Magnet
    Material
    Included
    No.
    Required
    Size
    Each
    Red Laser
    100200-0.250" to 0.250" @ 100 ft.3/8" @ 100 ft.FDA Class II6500.0025"1 3/4"5/8"1"Magnetic BaseNeodymiumNo43863273A10000000
     
    Style B—Battery Powered—Dot
    Image of Product. Front orientation. Alignment Lasers. Pocket-Sized Pulley Alignment Lasers, Style B—Battery Powered—Dot.
    Style B lasers have a threaded tip, so they’re compatible with converters that change the shape of the laser, so you can perform a variety of tasks with the same tool.
    Overall
    Batteries
    For Max. Pulley
    Spacing, ft.
    Max. Laser
    Distance, ft.
    Leveling and Aligning
    Accuracy
    Dot Size @
    Distance
    Laser Class
    Wavelength,
    nm
    Tolerance
    per ft.
    Lg.
    Wd.
    Ht.
    Mount Type
    Magnet
    Material
    Included
    No.
    Required
    Size
    Each
    Red Laser
    50400-0.125" to 0.125" @ 100 ft.3/8" @ 100 ft.FDA Class IIIa6500.0013"2 1/4"5/8"1"Magnetic BaseNeodymiumNo43863273A220000000
     
    Laser Converters
    Image of Product. Front orientation. Laser Converters. 90° Beam Splitters.
    Image of Product. Front orientation. Laser Converters. Dot-to-Dotted Line Converters.
    Image of Product. Front orientation. Laser Converters. Dot-to-Line Converters.

    90° Beam Splitters

    Dot-to-Dotted

    Line Converters

    Dot-to-Line

    Converters

    Component
    Line Size @
    Distance
    Dotted Line Size
    @ Distance
    Each
    90° Beam Splitter——20005A1150000000
    Dot-to-Dotted Line Converter—2" @ 1 ft.20005A112000000
    Dot-to-Line Converter6" @ 1 ft.—20005A11600000
    Dot-to-Line Converter8" @ 1 ft.—20005A11300000
    Dot-to-Line Converter16" @ 1 ft.—20005A11400000
    Dot-to-Line Converter28" @ 1 ft.—20005A11100000

    Roller Alignment Lasers

    Image of ProductInUse. Front orientation. Alignment Lasers. Roller Alignment Lasers.
    These lasers take aligning rollers from the traditional multi-tool, multi-person job to a one-tool, one-person job. Strap the transmitter to the roller you want to match and the receiver to the roller you want to check. Instead of aligning with lots of trial and error, these tools have a horizontal beam that shows if your rollers are aligned in the same plane, and a vertical beam that shows if the rollers are evenly spaced along their length. Simply adjust the roller until the beams line up with the tools' reference points.
    In addition to being easy to use, these lasers were also designed to be useful in most roller setups. The adjustable straps allow you to secure them to different roller sizes and materials. They're also compact enough to fit in tight spaces between rollers.
    Battery Powered—Line
    Image of Specification. Red Laser. Front orientation. Contains Border. Red Laser. Roller Alignment Lasers.
    Image of Specification. Green Laser. Front orientation. Contains Border. Green Laser. Roller Alignment Lasers.

    Red

    Laser

    Green

    Laser

    Red Laser—Red lasers are best viewed indoors, since they’re dimmer than green lasers.
    Green Laser—Green lasers appear up to 10 times brighter than red lasers, so they’re easier to see outdoors or in bright indoor lighting, as well as from far away.
    Overall
    Batteries
    For Roller
    Dia.
    Max. Laser
    Distance, ft.
    Leveling and Aligning
    Accuracy
    No. of
    Lines
    Line Size @
    Distance
    Laser Class
    Wavelength,
    nm
    Lg.
    Wd.
    Ht.
    Mount
    Type
    Container
    Type
    Included
    No.
    Required
    Chemistry
    Type
    Charger
    Included
    Includes
    Each
    Red Laser
    1" to 4"4-0.001" to 0.001" @ 12"20.002" @ 4 ft.FDA Class II6358 1/2"2 1/2"2"StrapPlastic CaseYes1Lithium Ion (Li-Ion)RechargeableYesOne Adjustable Target7138N11000000000
     
    Green Laser
    1" to 12"10-0.001" to 0.001" @ 12"20.007" @ 4 ft.FDA Class II53212"4 1/4"3"StrapPlastic CaseYes1Lithium Ion (Li-Ion)RechargeableYesOne Adjustable Target7138N1200000000
    6" to 96"10-0.001" to 0.001" @ 12"20.007" @ 4 ft.FDA Class II53212"16 1/2"6"StrapPlastic CaseYes1Lithium Ion (Li-Ion)RechargeableYesOne Adjustable Target7138N13000000000
     

    Table-Mount Alignment Lasers

    Image of ProductInUse. Front orientation. Contains Annotated, Border. Alignment Lasers. Table-Mount Alignment Lasers.
    Image of Product. Front orientation. Alignment Lasers. Table-Mount Alignment Lasers, Battery Powered—Dot.

    Battery Powered—Dot

    Image of Product. Front orientation. Alignment Lasers. Table-Mount Alignment Lasers, Electric—Dot.

    Electric—Dot

    Position these lasers directly on a flat surface. Lasers project a red dot that is best viewed indoors. Twist the knob to focus the dot so it is more precise at short distances.
    Battery Powered—Dot
    Image of Product. Front orientation. Alignment Lasers. Table-Mount Alignment Lasers, Battery Powered—Dot.
    Image of Specification. Front orientation. Fastener Mount. Table-Mount Alignment Lasers, Battery Powered—Dot, Magnet Mount.

    Magnet/Fastener Mount

    Overall
    Mounting
    Holes
    Batteries
    Max. Laser
    Distance, ft.
    Leveling and Aligning
    Accuracy
    Dot Size @ Distance
    Laser Class
    Wavelength,
    nm
    Lg.
    Wd.
    Ht.
    Mounting Fasteners
    Included
    No.
    of
    Dia.
    Included
    No.
    Required
    Chemistry
    Size
    Each
    Red Laser
    300-1/8" to 1/8" @ 170 ft.1/16" @ 2 ft.
    3" @ 300 ft.    		FDA Class IIIa6504"1 1/2"1"No40.201"No1Lithium12320005A410000000
     
    Accessories for Alignment Lasers
    Laser Mounts
    For Laser
    Class
    Ht.
    Dia.
    Material
    Pivot
    Angle
    Tilt Range
    of Motion
    Each
    Magnet/Fastener Mount
    FDA Class IIIa4 3/4"3"Plastic-Coated ABS/Plastic-Coated Stainless Steel360°180°20005A540000000
     
    Laser Converters
    Image of Product. Front orientation. Laser Converters. 90° Beam Splitters.
    Image of Product. Front orientation. Laser Converters. Dot-to-Crosshair Converters.
    Image of Product. Front orientation. Laser Converters. Dot-to-Dotted Line Converters.
    Image of Product. Front orientation. Laser Converters. Dot-to-Line Converters.

    90° Beam Splitters

    Dot-to-Crosshair

    Converters

    Dot-to-Dotted

    Line Converters

    Dot-to-Line

    Converters

    Component
    Line Size @
    Distance
    Dotted Line Size
    @ Distance
    Crosshair Size
    @ Distance
    Each
    90° Beam Splitter———20005A1150000000
    Dot-to-Crosshair Converter——2 1/4" @ 1 ft.20005A33000000
    Dot-to-Dotted Line Converter—2" @ 1 ft.—20005A112000000
    Dot-to-Line Converter6" @ 1 ft.——20005A11600000
    Dot-to-Line Converter8" @ 1 ft.——20005A11300000
    Dot-to-Line Converter12" @ 1 ft.——20005A32000000
    Dot-to-Line Converter16" @ 1 ft.——20005A11400000
    Dot-to-Line Converter28" @ 1 ft.——20005A11100000
    Batteries
    Image of Product. Front orientation. Batteries. 123 Battery.

    123

    Battery

    Battery
    Size
    Battery
    Chemistry
    Voltage,
    V DC
    Battery
    Cap., mA·h
    Pkg.
    Qty.
    Pkg.
    Disposable Battery
    123Lithium31,50017821K6300000
     
    Electric—Dot
    Image of Product. Front orientation. Alignment Lasers. Table-Mount Alignment Lasers, Electric—Dot.
    Image of Specification. Front orientation. Fastener Mount. Table-Mount Alignment Lasers, Electric—Dot, Magnet Mount.

    Magnet/Fastener Mount

    Overall
    Electrical
    Mounting
    Holes
    Max. Laser
    Distance, ft.
    Leveling and Aligning
    Accuracy
    Dot Size @ Distance
    Laser Class
    Wavelength,
    nm
    Lg.
    Wd.
    Ht.
    Connection
    No. of
    Blades
    Cord Lg.,
    ft.
    Mounting Fasteners
    Included
    No.
    of
    Dia.
    Each
    Red Laser—120V AC
    300-1/8" to 1/8" @ 170 ft.1/16" @ 2 ft.
    3" @ 300 ft.    		FDA Class IIIa6504"1 1/2"1"Straight Blade26No40.201"20005A430000000
     
    Accessories for Alignment Lasers
    Laser Mounts
    For Laser
    Class
    Ht.
    Dia.
    Material
    Pivot
    Angle
    Tilt Range
    of Motion
    Each
    Magnet/Fastener Mount
    FDA Class IIIa4 3/4"3"Plastic-Coated ABS/Plastic-Coated Stainless Steel360°180°20005A540000000
     
    Laser Converters
    Image of Product. Front orientation. Laser Converters. 90° Beam Splitters.
    Image of Product. Front orientation. Laser Converters. Dot-to-Crosshair Converters.
    Image of Product. Front orientation. Laser Converters. Dot-to-Dotted Line Converters.
    Image of Product. Front orientation. Laser Converters. Dot-to-Line Converters.

    90° Beam Splitters

    Dot-to-Crosshair

    Converters

    Dot-to-Dotted

    Line Converters

    Dot-to-Line

    Converters

    Component
    Line Size @
    Distance
    Dotted Line Size
    @ Distance
    Crosshair Size
    @ Distance
    Each
    90° Beam Splitter———20005A1150000000
    Dot-to-Crosshair Converter——2 1/4" @ 1 ft.20005A33000000
    Dot-to-Dotted Line Converter—2" @ 1 ft.—20005A112000000
    Dot-to-Line Converter6" @ 1 ft.——20005A11600000
    Dot-to-Line Converter8" @ 1 ft.——20005A11300000
    Dot-to-Line Converter12" @ 1 ft.——20005A32000000
    Dot-to-Line Converter16" @ 1 ft.——20005A11400000
    Dot-to-Line Converter28" @ 1 ft.——20005A11100000

    Adjustable Dot-to-Line Laser Levels

    Image of Product. Front orientation. Contains Annotated. Laser Levels. Adjustable Dot-to-Line Laser Levels.
    Twist the head to switch between a dot, a horizontal line, or a vertical line. These lasers project accurate level references onto walls, ceilings, and equipment. The laser is red and is best viewed indoors.
    When a single point of reference is enough, use a dot. Lines give you an extended reference, so you can level several objects without moving the laser. For stability, mount these lasers to a tripod (sold separately), or attach the magnetic base to a metal surface.
    Size
    Overall
    No. of Vials
    Mounting
    Holes
    Leveling and Aligning
    Accuracy
    Max. Laser
    Distance, ft.
    Dot @
    Distance
    Line @
    Distance
    Laser Class
    Wavelength
    Range, nm
    Lg.
    Wd.
    Ht.
    Horiz.
    Vert.
    45°
    Cross
    Check
    Sensitivity
    Mount Type
    No.
    of
    Thread
    Size
    Magnet
    Material
    Batteries
    Included
    Each
    -1/8" to 1/8" @ 50 ft.1005/16" @ 50 ft.3/8" @ 50 ft.FDA Class IIIa640 to 6608"1 1/4"3 1/2"11110.126"/1 ft., 36 min/0.1"Screw On, Magnetic Base11/4"-20
    		NeodymiumYes2032A11000000
    Tripods
    Image of Product. Front orientation. Tripods.
    Ht.
    For Mounting Hole
    Thread Size
    Material
    Each
    16" to 51"1/4"-20
    		Aluminum
    		4098T31000000

    Digital Angle Indicators with Laser

    Image of ProductInUse. Front orientation. Angle Indicators. Digital Angle Indicators with Laser.
    Align guide rails or lay pipe at specific angles from a flat surface. The laser light is red and is best viewed indoors. The display shows the precise angle of the beam and rotates for overhead measurements. The audible level indicator tells you when the tool is level and plumb.
    Laser
    Overall
    Angle Measured
    Range
    Accuracy
    No. of Measuring
    Quadrants
    Quadrant Angle
    Measured Range
    Accuracy
    Distance
    Range, ft.
    Dot Size @
    Distance
    Lg.
    Wd.
    Ht.
    Batteries
    Included
    Features
    Each
    Screw On, Magnetic Base
    0° to 360°±0.2°40° to 90°-1/8" to 1/8" @ 50 ft.0 to 2001/4" @ 50 ft.10 1/2"1 1/4"2 1/4"YesAudible Level Indicator, Backlit Display9182T110000000
     

    Multiple Dot Laser Levels

    Image of Product. Front orientation. Contains Annotated. Laser Levels. Multiple Dot Laser Levels.
    Project accurate level references onto walls and ceilings to hang light fixtures or install pipe. These lasers have four vials to verify the level, plumb, and square reference points are accurate. Because they’re red, the lasers are best viewed indoors. They have a screw-on mount to secure to a tripod, or you can use the magnetic base to stick them to equipment for quick checks. A V-groove on the body creates stability on curved surfaces, such as pipe or conduit. They’re powered by disposable batteries, so they’re portable and easy to use when you’re not near an outlet.
    Overall
    No. of Vials
    Mounting
    Holes
    Batteries
    No. of
    Dots
    Max. Laser
    Distance, ft.
    Leveling and Aligning
    Accuracy
    Dot Size @
    Distance
    Laser Class
    Wavelength,
    nm
    Lg.
    Wd.
    Ht.
    Horiz.
    Vert.
    45°
    Cross
    Check
    Includes
    Sensitivity
    Mount Type
    No.
    of
    Thread
    Size
    Included
    No.
    Req.
    Type
    Size
    Container
    Type
    Each
    Red Laser
    3100-1/8" to 1/8" @ 50 ft.1/4" @ 50 ft.FDA Class IIIa640 to 6609 1/2"1"2 1/4"1111Laser Mount0.133"/1 ft., 38 min/0.1"Screw On, Magnetic Base11/4"-20
    		Yes3DisposableAAPouch2032A90000000
     

    Proximity-Sensor Shaft Alignment Kits

    Image of ProductInUse. Front orientation. Shaft Alignment Kits. Proximity-Sensor Shaft Alignment Kits.
    Align rotary shafts with the help of a mobile app. These sensor kits are more accurate than straightedges and easier to use than dial indicators. Properly aligning shafts reduces vibration and protects couplings, bearings, and other parts from wear and damage.
    Use the included chain clamps to mount these sensors above your coupling, where they detect the degree of misalignment between the shafts. The app shows live animations to give step-by-step instructions for repositioning your equipment. Once the shafts are aligned, the app saves a report documenting the process.
    Good for extended use in industrial environments, these sensors last up to 18 hours between charges and are IP54 rated for protection from dust.
    Cannot Be Sold To—They cannot be sold to the listed areas due to energy efficiency regulations.
    Battery
    For Shaft
    Dia.
    Max. Horiz.
    Clearance
    Max. Coupling
    Ht.
    Accuracy
    Operating System Compatibility
    Container
    Type
    Includes
    Type
    Life,
    hr.
    Enclosure
    Rating
    Certificate Type
    Cannot Be Sold To
    Each
    7/8" to 6 1/4"7.3"2.2"±0.5°Android 4.4.2 or Later
    iOS 9.0 or Later    		Plastic CaseOne Measuring Unit with Two Proximity Sensors
    Three Reference Bars (4", 6", and 8" Lg.)
    Two Chain Clamps
    One Tape Measure
    One USB Charging Cable    		Rechargeable18IP54
    		Calibration CertificateCalifornia, Oregon3631N11000000000

    Single Dot Laser Levels

    Image of Product. Front orientation. Contains Annotated. Laser Levels. Single Dot Laser Levels.
    Verify your installation is level using a single reference point. These green lasers appear up to 10 times brighter than red lasers for visibility from farther away and in brightly lit areas, including outdoors. Five bubble vials confirm level, plumb, and a specific angle. One vial is a pitch gauge, which shows slope in 1/8" increments to help check drainage. For quick and easy mounting, these levels have a magnetic base. It's strong enough to hold even on vibrating equipment.
    Overall
    No. of Vials
    Batteries
    No. of
    Dots
    Max. Laser
    Distance, ft.
    Leveling and Aligning
    Accuracy
    Dot Size @
    Distance
    Laser Class
    Wavelength,
    nm
    Lg.
    Wd.
    Ht.
    Horiz.
    Vert.
    30°
    45°
    Sensitivity
    Mount Type
    Pitch Increments
    per ft.
    Magnet
    Material
    Included
    No.
    Req.
    Type
    Size
    Enclosure
    Rating
    Each
    Green Laser
    1200-1/8" to 1/8" @ 100 ft.3/16" @ 50 ft.FDA Class II510 to 5308"3/4"2 1/4"21110.125"/1 ft., 36 min/0.1"Magnetic Base1/8"NeodymiumNo2DisposableAAIP54
    		7075N110000000
     

    Dock Alignment Lasers

    Image of ProductInUse. Front orientation. Alignment Lasers. Dock Alignment Lasers.
    Image of Product. Front orientation. Alignment Lasers. Dock Alignment Lasers.
    Help drivers center their trucks as they dock, no matter the weather or time of day. They shoot parallel bright green lines that can be seen up to 150 ft. away, even in direct sunlight. Where painted lines are less visible from snow, rain, fallen leaves, or darkness, these lasers stay visible. The included steel enclosures protect the laser from dust, debris, and the elements. The laser shoots through a hole in the side of the enclosure. You can also use these lasers indoors.
    DC—DC lasers can be connected to a controller, such as a programmable logic controller (PLC), to automate when the lasers turn on and off.
    Overall
    Enclosure
    Mounting
    Holes
    Enclosure
    Mounting Holes
    Voltage
    Leveling and Aligning
    Accuracy
    Max. Laser
    Distance, ft.
    Line Size @
    Distance
    Laser Class
    Wavelength,
    nm
    Lg.
    Wd.
    Ht.
    Ht.
    Wd.
    Dp.
    Mounting Fasteners
    Included
    No.
    of
    Lg.
    Wd.
    No.
    of
    Dia.
    Cord Lg.,
    ft.
    Includes
    Each
    With 2 Straight-Blade Plug
    110V AC-1/4" to 1/4" @ 150 ft.1501/2" @ 50 ft.FDA Class IIIa5204"2 1/2"5"8"8"4"No10.4"0.313"40.26"12Two Lasers, Two Steel Enclosures6696N11000000000
     
    With Screw-Terminal Wire Connection
    12V DC to 24V DC-1/4" to 1/4" @ 150 ft.1501/2" @ 50 ft.FDA Class IIIa5204"2 1/2"5"8"8"4"No10.4"0.313"40.26"—Two Lasers, Two Steel Enclosures6696N1200000000
     

    Automatic Leveling Dot Laser Levels

    Image of Product. Front orientation. Contains Annotated. Laser Levels. Automatic Leveling Dot Laser Levels, 3 Dots.
    Image of Product. Front orientation. Contains Annotated. Laser Levels. Automatic Leveling Dot Laser Levels, 5 Dots.

    3 Dots

    5 Dots

    Set these lasers on any surface, and they'll level themselves within about 4°. Whether you’re hanging a drop ceiling or aligning bench tops, they project accurate level references to make sure your installation will be at the right height. You can also mount them in a few different ways. They have a threaded insert to attach to a tripod (sold separately). Or use the magnetic base, which is strong enough to hold even on vibrating equipment.
    Red Laser—Red lasers are best for indoor environments, since they’re dimmer than green lasers.
    Green Laser—Green lasers appear up to 10 times brighter than red lasers, making them easier to see outdoors or in bright indoor lighting, as well as from far away.
    5 Dots—Lasers with 5 dots help you verify your installation is straight, level, and plumb at the same time. This prevents you from having to reposition the level frequently, so you can work faster.
    Strap Mount—Lasers with a strap mount can be secured on poles and ladders.
    Overall
    Mounting
    Holes
    Batteries
    No. of
    Dots
    Max. Laser
    Distance, ft.
    Leveling and Aligning
    Accuracy
    Dot Size @
    Distance
    Laser Class
    Wavelength,
    nm
    Lg.
    Wd.
    Ht.
    Mount Type
    No.
    of
    Thread Size
    Magnet
    Material
    Included
    No.
    Req.
    Type
    Size
    Enclosure
    Rating
    Container
    Type
    Each
    Red Laser
    5100-1/8" to 1/8" @ 50 ft.3/16" @ 50 ft.FDA Class IIIa625 to 6455"2"5 3/4"Strap, Screw On, Magnetic Base21/4"-20
    5/8"-11
    		NeodymiumYes3DisposableAAIP54
    		Carrying Case1986A220000000
     
    Green Laser
    3125-1/8" to 1/8" @ 30 ft.1/16" @ 50 ft.FDA Class II500 to 5404 1/2"2"4 1/2"Screw On, Magnetic Base11/4"-20
    		NeodymiumYes2DisposableAAIP65
    		Carrying Case1986A18000000
    5125-1/8" to 1/8" @ 30 ft.1/16" @ 50 ft.FDA Class II500 to 5404 1/2"2"4 1/2"Screw On, Magnetic Base11/4"-20
    		NeodymiumYes2DisposableAAIP65
    		Carrying Case1986A27000000
     
    Tripods
    Image of Product. Front orientation. Tripods.
    Ht.
    For Mounting Hole
    Thread Size
    Material
    Each
    16" to 51"1/4"-20
    		Aluminum
    		4098T31000000

    Long-Distance Laser Level Kits

    Image of Product. Front orientation. Laser Levels. Long-Distance Laser Level Kits.
    Image of Product. Front orientation. Laser Mounts.

    Laser Mounts

    These kits include a laser, a beam splitter, and a laser mount. Mark a dot up to 1,000 feet across your plant for long-range applications such as laying out conveyors and positioning ventilation systems. A single laser dot gives you a simple way to check that your installation is level. These levels are compact, portable, and have a long battery life. You can mount them to rotating equipment without worrying about power cords. Use the laser mount to steady lasers on uneven surfaces or to mount them to a tripod. These mounts have three adjustable legs that stabilize the laser.
    Red Laser—Red lasers are best used indoors, since they’re dimmer than green lasers.
    Green Laser—Green lasers appear up to 20 times brighter than red lasers, so they’re visible outdoors and in bright lighting. They’re also easy to see from far away.
    Laser Levels
    Laser Mounts
    Overall
    No. of
    Vials
    Mounting
    Holes
    Leveling and Aligning
    Accuracy
    Max. Laser
    Distance, ft.
    Laser Class
    Wavelength,
    nm
    Lg.
    Wd.
    Ht.
    Horiz.
    Vert.
    No.
    of
    Thread
    Size
    Batteries
    Included
    Each
    Each
    Red Laser
    -1/8" to 1/8" @ 100 ft.1,000FDA Class IIIa6359 1/2"1"1 1/8"1211/4"-20
    		Yes21475A68000000021475A540000000
     
    Green Laser
    -1/8" to 1/8" @ 100 ft.1,000FDA Class IIIa5209 1/2"1"1 1/8"1211/4"-20
    		Yes21475A730000000021475A54000000
     
    Accessories and Replacements for Laser Levels
    Dot-to-Line Laser Converter—Dot-to-line laser converters change the dot into a vertical or horizontal line.
    90° Laser Beam Splitter—90° laser beam splitters convert one dot into two dots set at a 90° angle.
    Each
    Dot-to-Line Laser Converter21475A570000000
    90° Laser Beam Splitter21475A55000000

    Long-Distance Laser Levels

    Image of ProductInUse. Front orientation. Contains Annotated, Border. Laser Levels. Long-Distance Laser Levels.
    Image of Product. Front orientation. Laser Mounts.

    Laser Mounts

    Mark a dot up to 100 feet across your plant for long-range applications such as laying out conveyors and positioning ventilation systems. The single laser gives you a simple reference point to check that your installation is level. These levels are compact, portable, and have a long battery life.
    Red Laser—Red lasers are best used indoors, since they’re dimmer than green lasers.
    Green Laser—Green lasers appear up to 20 times brighter than red lasers, so they’re visible outdoors and in bright lighting. They’re also easy to see from far away.
    Laser Mounts—Add a laser mount to steady lasers on uneven surfaces or to mount them to a tripod. These mounts have three adjustable legs that stabilize the laser.
    Laser Levels
    Laser Mounts
    Overall
    No. of
    Vials
    Mounting
    Holes
    Batteries
    No. of
    Dots
    Max. Laser
    Distance, ft.
    Leveling and Aligning
    Accuracy
    Dot Size @
    Distance
    Laser Class
    Wavelength,
    nm
    Lg.
    Wd.
    Ht.
    Horiz.
    Vert.
    Sensitivity
    Mount
    Type
    No.
    of
    Thread
    Size
    Included
    No.
    Req.
    Type
    Voltage,
    V DC
    Each
    Each
    Red Laser
    1100-1/8" to 1/8" @ 100 ft.1/4" @ 50 ft.FDA Class IIIa6359 1/2"1"1 1/8"120.105"/1 ft., 30 min/0.1"Screw On11/4"-20
    		Yes2Disposable321475A64000000021475A540000000
     
    Green Laser
    1100-1/8" to 1/8" @ 100 ft.1/4" @ 50 ft.FDA Class IIIa5209 1/2"1"1 1/8"120.017"/1 ft., 5 min/0.1"Screw On11/4"-20
    		Yes2Disposable321475A7400000021475A54000000
     
    Accessories for Laser Levels
    Dot-to-Line Laser Converter—Dot-to-line laser converters change the dot into a vertical or horizontal line.
    90° Laser Beam Splitter—90° laser beam splitters convert one dot into two dots set at a 90° angle.
    Each
    Dot-to-Line Laser Converter21475A570000000
    90° Laser Beam Splitter21475A55000000
    Long-Distance Laser Level Kit with Red Laser (Includes 90° Beam Splitter and Laser Mount)21475A68000000
    Long-Distance Laser Level Kit with Green Laser (Includes 90° Beam Splitter and Laser Mount)21475A7300000000

    Magnetic-Base Long-Distance Laser Levels

    Image of Product. Front orientation. Laser Levels. Magnetic-Base Long-Distance Laser Levels.
    Image of Specification. Red Laser. Front orientation. Contains Border. Red Laser. Magnetic-Base Long-Distance Laser Levels.

    Red

    Laser

    Image of Specification. Green Laser. Front orientation. Contains Border. Green Laser. Magnetic-Base Long-Distance Laser Levels.

    Green

    Laser

    Image of Product. Front orientation. Laser Mounts.

    Laser Mounts

    Stick these levels to most metal surfaces to mark a dot up to 500 feet across your plant. They’re often used for long range applications, such as laying out conveyors and aligning ventilation systems. The single laser dot gives you a simple check that your installation is level against one reference point. These levels are compact, portable, and have a long battery life. Mount them to rotating equipment without worrying about power cords.
    Red Laser—Red lasers are dimmer than green lasers, so they’re best viewed indoors.
    Green Laser—Green lasers appear up to 10 times brighter than red lasers, so they remain visible from farther distances and in brightly lit areas, including outdoors.
    Laser Mounts—Use a laser mount for mounting the laser to a tripod, or placing it on a surface. The mount has three adjustable legs to level the laser.
    Laser Levels
    Laser Mounts
    Overall
    No. of
    Vials
    Batteries
    No. of
    Dots
    Max. Laser
    Distance, ft.
    Leveling and Aligning
    Accuracy
    Dot Size @
    Distance
    Laser Class
    Wavelength,
    nm
    Lg.
    Wd.
    Ht.
    Horiz.
    Vert.
    45°
    Sensitivity
    Mount Type
    Included
    No.
    Req.
    Type
    Size
    Each
    Each
    Red Laser
    1500-1/8" to 1/8" @ 100 ft.1/2" @ 100 ft.FDA Class IIIa6356 1/2"5/8"1 3/8"1110.017"/1 ft., 5 min/0.1"Magnetic BaseYes2DisposableAAA21475A69000000021475A540000000
     
    Green Laser
    1500-1/8" to 1/8" @ 100 ft.1/2" @ 100 ft.FDA Class IIIa5326 1/2"5/8"1 3/8"1110.017"/1 ft., 5 min/0.1"Magnetic BaseYes2DisposableAAA21475A1100000021475A54000000
     
    Accessories for Laser Levels
    Dot-to-Line Laser Converter—Dot-to-line laser converters change the dot into a vertical or horizontal line.
    90° Laser Beam Splitter—90° laser beam splitters convert one dot into two dots set at a 90° angle.
    Each
    Dot-to-Line Laser Converter21475A570000000
    90° Laser Beam Splitter21475A55000000

    Pulley Alignment Lasers

    Image of Product. Front orientation. Contains Annotated. Alignment Lasers. Pulley Alignment Lasers, Three Adjustable Targets.

    Three Adjustable Targets

    Image of Specification. Front orientation. Contains Annotated. Alignment Lasers. Pulley Alignment Lasers, One Adjustable Target.
    Image of Specification. Front orientation. Three Adjustable Targets. Pulley Alignment Lasers.

    One Adjustable Target

    Three Adjustable Targets

    Check that your pulley, gear, or sprocket system is properly aligned. These magnetic lasers stick to equipment made of steel. Project the laser beam down your belt or chain and look to see how it hits the target—you can determine angular and offset misalignment at the same time. The target has a machined surface that sits parallel to the contact surface for precise alignment. Adjust your setup until the laser line overlaps with the reference line on the target. These lasers are portable and battery powered, so they’re easy to use in spaces without outlets.
    Red Laser—Red lasers are best for indoor environments, since they’re dimmer than green lasers.
    Green Laser—Green lasers appear up to 10 times brighter than red lasers, so they’re easier to see outdoors or in bright indoor lighting, as well as from far away.
    Built-In LED—Lasers with a built-in LED provide light in dim areas.
    One Adjustable Target—Lasers with one adjustable target have a single laser line that indicates offset and angular misalignment. A mirror on the target reflects the laser back to the transmitter’s reference line to show misalignment. No need to fuss with the traditional multi-target method.
    For
    Pulley
    Overall
    Spacing
    Dia.
    Leveling and Aligning Accuracy
    Max. Laser
    Distance, ft.
    Line Size @
    Distance
    Laser Class
    Wavelength,
    nm
    Tolerance per ft.
    Tolerance
    Lg.
    Wd.
    Ht.
    Container
    Type
    Batteries
    Included
    Includes
    Each
    Red Laser
    3" to 20 ft.3" to 36"-1/16" to 1/16" @ 10 ft.
    -5/16" to -5/16" @ 50 ft.    		507 ft. @ 6 ft.FDA Class II635-0.002" to 0.002"6 3/4"5/8"1 3/4"Plastic CaseYesOne 30-150 lb. Capacity Belt Tension Tester, One 100-300 lb. Capacity Belt Tension Tester, Three Adjustable Targets2309A46000000000
    6" to 22 ft.3" to 60"-1/16" to 1/16" @ 6 ft.62 1/4 ft. @ 6 ft.FDA Class II635-0.0125" to 0.0125"1 1/4"1 1/4"8"Plastic CaseYesBuilt-In LED, One Adjustable Target2309A1200000000
     
    Green Laser
    3" to 20 ft.3" to 36"-1/16" to 1/16" @ 10 ft.
    -5/16" to -5/16" @ 50 ft.    		507 ft. @ 6 ft.FDA Class II532-0.002" to 0.002"6 3/4"5/8"1 3/4"Plastic CaseYesThree Adjustable Targets2309A1100000000
    6" to 22 ft.3" to 60"-1/16" to 1/16" @ 6 ft.
    -1/32" to 1/32" @ 15 ft.    		152 1/4 ft. @ 6 ft.FDA Class II532-0.0125" to 0.0125"1 1/4"1 1/4"8"Plastic CaseYesBuilt-In LED, One Adjustable Target2309A1300000000
     

    Laser Directing Components

    Image of System. Front orientation. Contains Annotated. Laser Directing Components.
    Image of Product. Front orientation. Laser Directing Components. Mirrors.
    Image of Product. Front orientation. Laser Directing Components. 90° Turning Mirrors.
    Image of Product. Front orientation. Laser Directing Components. 90° Beam Splitters.
    Image of Product. Front orientation. Laser Directing Components. Dot-to-Line Converters.

    Mirrors

    90° Turning Mirrors

    90° Beam Splitters

    Dot-to-Line

    Converters

    Image of Product. Front orientation. Laser Directing Components. Fixed Holders for Mirror and Beam Converters.
    Image of Product. Front orientation. Laser Directing Components. Adjustable-Angle Holders for Mirror and Beam Converters.
    Image of Product. Front orientation. Laser Directing Components. Magnetic Mounts.
    Image of Product. Front orientation. Laser Directing Components. Adjustable-Angle Mounts.

    Fixed

    Holders

    for

    Mirror

    and Beam

    Converters

    Adjustable-Angle

    Holders for

    Mirror and Beam

    Converters

    Magnetic Mounts

    Adjustable-Angle Mounts

    Direct laser beams where you need them with components that turn or split your beam. They work with any dot laser.
    Mirrors—Mirrors require a holder to mount to a standoff.
    90° Turning Mirrors—90° turning mirrors screw into a standoff.
    90° Beam Splitters—90° beam splitters convert a single dot into two dots; one continues in a straight line, the other projects at a 90° angle. Splitters screw into a standoff.
    Dot-to-Line Converters—Dot-to-line converters require a holder to mount to a standoff.
    Component
    Max. Tilt
    Angle
    Max. Rotation
    Angle
    Each
    Mirror——5842T22000000
    90° Turning Mirror——5842T21000000
    90° Beam Splitter——5842T23000000
    Dot-to-Line Converter——5842T27000000
    Fixed Holder for Mirror and Beam Converters——5842T3400000
    Adjustable-Angle Holder for Mirror and Beam Converters4°—5842T3300000
    Magnetic Mount——5842T2800000
    Adjustable-Angle Mount—180°5842T35000000
    Standoffs
    Standoffs have 8-32 male threads on one end and 1/4"-20 female threads on the other. Diameter is 1/2". For additional lengths, see 18-8 Stainless Steel Standoffs.
    Lg.
    Each
    1"94033A42100000
    4"94033A4440000
    6"94033A44900000
    12"94033A46000000
    back to top