We will reply to your message within an hour.
More
Stop leaks in metal tanks and equipment without draining the contents.
To stop leaks in metal tanks and equipment without draining the contents, heat the area with a heat gun or torch to melt the stick and form a permanent seal. The resulting patch can withstand pressure up to 600 psi.
Stop leaks in metal tanks and equipment without draining the contents. Until a permanent repair can be made, rub these sticks into the leak to form a temporary seal.
Seal leaks around small holes.
Fill cracks with these coatings to stop leaks and deaden sound.
Make a temporary repair to cracks in any flat roof. These patching compounds are a powder that forms a thick gel in minutes when poured directly into standing water and rain.
These patching compounds are the most flexible and watertight we offer.
Roll out a fast fix for leaky roofs and gutters with these peel-and-stick rolls.
Repair holes and seal gaps in roofing and gutters. These patching compounds are durable and water resistant.
Repair small leaks and cracks in coolant tanks for commercial vehicles and industrial equipment. These surface fillers meet ASTM D3147 for their ability to stop leaks in engine cooling systems.
Apply these sealants in cold temperatures, on wet surfaces, and even through running water.
Clear enough to read through, this UV-resistant sealant allows optimal light transmission for use with solar cells and fiber optics.
Seal leaks on vacuum systems and components.
Wrap this tape tightly around pipe and other surfaces to seal cracks and joints without having to shut down your system.
Fix roof leaks in cold and wet conditions. These sealants can even be applied underwater.
These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.
Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.
Reflect at least 85% of the sun's rays to reduce cooling costs. These coatings also restore and reinforce your roof by filling cracks and forming a water-resistant seal.
These coatings reflect up to 60% of the sun's rays. They also restore and reinforce your roof by forming a water-resistant seal.
Use these coatings to form a water-resistant layer to restore and reinforce your roof.
Stick these gaskets around door and vent cutouts or replace worn seals to maintain your enclosure's NEMA rating.
Very soft and conformable, this expanded PTFE gasket tape compresses into an extremely thin profile. Use it to create a leak-resistant seal in tight-tolerance applications, such as on precision machinery.
Often used for weatherstripping and sealing gaps around windows, doors, and hatches; this tough tape keeps out moisture, dirt, heat, and cold.
Patch and seal roofs, window frames, gutters, and vents with this conformable tape.
This tough, abrasion-resistant tape sticks to itself, so you can layer it over joints and seams to create an extra-strong bond. The thick adhesive conforms to fasteners and gaps to keep water out, even in extreme conditions.
Stop water penetration with this tacky, flexible tape. It conforms to irregular shapes and expands to fill gaps. Use it on freezers, windows, and in marine applications.
Use this tape for a watertight bond on gutters, roofing membranes, and other building materials.
An alternative to caulk and rubber sealants, this tape comes compressed and gradually expands to fill large gaps and voids.
Create strong, permanent bonds that can replace mechanical fasteners.
This tape can withstand temperatures up to 300° F.
Use this clear tape for strong, invisible bonds.
The acrylic adhesive on this tape sticks to hard-to-bond materials, such as plastics and powder-coated surfaces.
Cut these sheets to create a customized, permanent bond in the shape you need.
Use these clear sheets for strong, invisible bonds.
Use these clear shapes for strong, invisible bonds.
These foam discs and squares have extra-strong adhesive on both sides to create permanent bonds.
Cut these sheets to the shape you need for a custom fit.
Tape is cut into convenient discs and rectangles.
Used to mount panels, signs, and dispensers, this foam tape absorbs shock and provides high strength holding power on rigid surfaces.
Mount lightweight signs and trim with this economical tape.
Prevent the spread of fire while sealing, cushioning, and damping vibration. This tape has adhesive on both sides.
Remove mounted objects from most surfaces without leaving residue behind.
The most conformable foam tape we offer, use this tape for mounting, gasketing, and damping sound and vibration. It has adhesive on both sides.
Use this tape outdoors for sealing and mounting signs and security control panels.
Foam damps vibration while securing lightweight objects, such as nameplates, dispensers, and smoke alarms. This tape has a tacky adhesive on one side and a permanent adhesive on the other.
Seal foil-jacketed insulation as well as air-conditioning and refrigeration systems with this conformable aluminum tape.
Reinforced with fiberglass, this tape is flexible yet resists tearing. Use it for sealing and patching insulation and duct.
For easy identification, this tape is printed with flexible duct standard UL 181A-P or UL 181B-FX.
Seal fiberglass duct and insulation that's faced with an all-service jacket (ASJ). Tape is reinforced with fiberglass.
It has the look of foil, but this polyethylene-coated cloth tape is more conformable so it won't twist or curl.
Seal and mask rough surfaces such as concrete and stucco with this tape. The adhesive removes cleanly, even after long-term exposure to moisture and UV light.
Our thinnest duct tape, this tape is easy to unwind and tear by hand.
Also known as gaffer's tape, this conformable cloth tape leaves no residue when removed. The matte finish won't reflect light. Choose a color that will blend in for temporary repairs.
This tape has a high-tack adhesive that bonds quickly to rough surfaces such as wood, plaster, stucco, brick, metal, and cement.
This tape has a self-extinguishing adhesive for flame retardance.
Meets ASME and NRC requirements for use in nuclear power plants. Use to seal end caps on stainless steel pipes, hold labels and signs, and seal ductwork.
This flexible, multipurpose tape offers water resistance with excellent adhesion.
For quick repairs, these small rolls of tape don't have a spool so they easily fit into a pocket.
When exposed to moisture, this resin-coated fiberglass tape becomes rock-hard in about 30 minutes. Use it for rigid, waterproof repairs.
Often used to repair vinyl facings, this tape can be used on water heater blankets and fiberglass insulation joints.
Use this glossy tape to seal seams and repair vinyl material such as banners.
Make invisible repairs with this clear tape. The weatherproof adhesive won't turn yellow outdoors.
This tape has a high-bond adhesive that won't leave residue behind so it meets clean room requirements.
Use this rubber tape to splice cable in high-voltage applications.
Protect impact-prone surfaces from scratches, chips, and abrasion with this thick, conformable tape.
One layer of fiberglass fabric is sandwiched between layers of silicone foam giving these strips strength to handle high-stress applications, such as gasketing.
Silicone maintains its flexibility across a wide range of temperatures.
These sheets and strips will bounce back to shape, even after extended compression.
This premium silicone is the most resilient foam we offer. It is equivalent to Cohrlastic and is also known as Norseal and silicone sponge.
Seal and damp vibration around high-temperature food-service equipment with these silicone foam sheets and strips.
Even after exposure to sunlight, rain, and snow, these silicone foam strips remain flexible.
Protect sensitive equipment from heat buildup with this silicone foam. These sheets are commonly used to fill gaps and damp vibration in computers, battery installations, and pipe assemblies.
A thin layer of aluminized fiberglass on this silicone foam reflects heat to protect sensitive equipment.
Even after extended compression, these sheets and strips will bounce back to shape.
Prevent the spread of flames with these self-extinguishing silicone foam sheets and strips.
Made of Epichlorohydrin, an alternative to Buna-N, these foam sheets have excellent resistance to oil.
An economical alternative to Viton® fluoroelastomer foam, these semi-rigid nylon foam sheets offer good resistance to a wide range of chemicals.
Offering excellent resistance to corrosive environments, these Viton® fluoroelastomer foam sheets and strips stand up to a wide variety of chemicals, fuels, and oils.
EPDM is blended with neoprene and SBR to create a general-purpose foam that offers good resistance to water and wear.
This foam meets UL fire extinguishing specifications. It's made from a blend of Buna-N, neoprene, and vinyl to offer offer good resistance to oil.
These vinyl foam sheets and strips are so conformable that once they're compressed they won't fully spring back. Use them to fill gaps and seal uneven surfaces.
Made from a blend of Buna-N, neoprene, and vinyl, these foam strips have good resistance to oil.
Made of EPDM foam, these sheets and strips have the best resistance to water, sunlight, and oxidation of all the foam we offer.
In addition to having good resistance to water, sunlight, and oxidation, these neoprene foam sheets and strips resist swelling when they come into contact with oil.
The original mouse pad material. These natural foam rubber sheets have a crisscross-textured skin on one side for a nonslip gripping surface and a layer of polyester fabric on the other side that allows objects to smoothly slide across it.
Just like the material found in wetsuits, these neoprene foam sheets are encased in nylon fabric for additional protection from wear caused by rubbing and abrasion.
Made of a blend of neoprene and EDPM, these foam sheets and strips resist water, sunlight, and oxidation.
When these sheets and strips are exposed to flames, the surface chars to create a protective barrier that prevents melting, dripping, and the possibility of spreading fire.
Because this natural rubber foam readily bounces back to shape after compression, it’s a good choice for repetitive sealing applications, such as on doors.
Patch drum leaks to prevent their contents from spilling, even if they hold messy and dangerous substances, such as oil, chemicals, and solvents.