Fit traditional fluorescent ceiling strip lights with these LED lights, which use energy more efficiently, last longer, and produce less heat.

Also known as strip or channel lights, the ends of these fixtures are designed to be wired together to create long rows of lights.

These lights fit into ceiling cutouts.

Mount these fixtures where you need light but don't have an electrical connection. They automatically turn on when movement is detected and off when an area is unoccupied.

Also known as pendant lights, these fixtures hang from a cord.

Use these lights in large, open areas such as warehouses and manufacturing spaces where the ceiling is up to 30-ft. high.

Suspend or mount with fasteners to the ceiling.

A sealed lens keeps moisture out to protect these lights against washdowns.

A wraparound lens disperses light from the sides as well as the bottom to produce ambient lighting.

Connect the hooks to a fixture to suspend lights from the ceiling.

Designed to withstand heat and grease, these lights are often used in commercial cooking hoods. They are also known as hood lights.

Similar in function to tubular machine lights, except strip machine lights have a flat lens that directs light downward.

Just like traditional tubular lights that illuminate your machine with a bright white light, these lights can also be programmed to switch over to a red or green light for communicating machine status.

Mount these lights into a recessed opening on your machine—they sit flush against the surface for a streamlined appearance.

Suspend these lights overhead or mount them above your workspace.

These IP67 rated lights withstand temporary submersion in a maximum of one meter of water for up to 30 minutes. They're compact for easy transport to job sites with no electrical power.

Rated IP65, these lights are sealed to protect against light washdowns from a garden hose. They have a height-adjustable stand and light heads that pivot up and down to direct light where it's needed.

A movable head lets you aim light where it’s needed most in areas that don't have electrical power service.

Because these lights are compatible with DeWalt rechargeable batteries, you can keep one type of cordless tool battery on hand. Their heads pivot to aim light where it's needed in areas that don't have electrical power service.

A series of bulb heads are attached to a power cord to provide overhead lighting for job sites.

With a NEMA 4X rating, these lights resist degradation when exposed to corrosive liquids, withstand liquids sprayed during washdowns, and are dust tight.

Because these lights have a reflector, they distribute light more evenly than other portable lights.

Mount this light on a pole to illuminate pedestrian areas such as streets and walkways.

Heads adjust to any angle so you can direct light where needed.

Powered by the sun, these security lights function in areas that don’t have access to electricity. They’re often used to shine light on parking lots, landscaping, signs, entryways, and other outdoor spaces.

Hardwire these lights to a power source.

These flashlights are built to handle everyday use. They have a slip-resistant grip to ensure a secure hold.

Shine light into hard-to-reach spaces with these flexible-arm flashlights.

The smooth stainless steel surface allows for easy cleaning.

Made of stainless steel, these pocket-size flashlights have a smooth, easy-to-clean surface.

Tilt the head on these flashlights to aim light exactly where it's needed. They have a flat bottom, so you can work hands-free without them rolling away.

Free your hands for other work by mounting a flashlight to a nearby surface.

Similar to a holster without the bulk, belt loops hold your flashlight when not in use.

Rated for use in environments where hazardous material is present.

In addition to pivoting 210°, the light heads rotate 360° for directing light exactly where it’s needed. They're rated for use in environments where hazardous material is present.

Because these flashlights are buoyant, they're easy to recover when dropped in the water.

Safe for use in environments where hazardous material is present.

Turn a mini flashlight into a headlamp with these straps.

Faster and easier to reposition than articulating-arm lights, these gooseneck-arm lights attach to your workspace for additional lighting.

These lights cast a narrower beam than other gooseneck-arm machine lights. Reposition them faster and more easily than articulating-arm lights.

Pivot the head to cast a narrow beam of light to exactly where it's needed.

These lights have a longer reach and hold their position better than gooseneck-arm lights, especially around vibration.

These lights swing out from the wall to illuminate loading docks and trailers.

No need for wiring—these lights plug-in with a two-prong plug.

These lights are sealed to protect against humidity, moisture, and dripping and splashing liquids.

Communicate a status at a glance by wiring these strip lights to change color when a part is malfunctioning inside your enclosure.

Make a custom panel light with your choice of light and lens cap color.

You can use these lights outdoors and they will still be visible. Rated IP67 for harsh environments.

These lights are rated IP69K to withstand high-pressure washdowns, such as those in food and beverage applications.

Carry these lights around with you and place them wherever needed. They can switch between being continuous or flashing.

The pad below the base absorbs shock and vibration.

Place these lights in full sun and their batteries charge during daylight hours. Lights automatically switch on at dusk and off at dawn.

Easier to spot than other strobe lights, these lights emit bursts of multiple flashes.

A series of four flashes per cycle makes these lights more visible than other strobe lights.

As small as a hockey puck and compatible with standard 12-volt vehicle plugs, these strobe lights are inconspicuous when not in use and quick to connect.

These strobe lights flash multiple times per cycle, making them easier to spot than standard strobe lights.

Set these portable lights wherever you need a signal light—they don't need to be wired or plugged in.

Mount the M22 male thread on the bottom of the light through a hole and then secure using the included nut.

Mount these lights horizontally or vertically in places where a tower will not fit.

Give a signal with the push of a button. These lights have a control box for activating each of the three light modules.

The quick-connect four-pole M12 plug on these lights makes them easy to hook up and configure.

Good for tight spaces where a tower of lights won't fit, these emit three colors from a single lens.

Use a computer to program colors, lighting patterns, and sounds to communicate a variety of status conditions, material levels, and cycle times—these stack lights have 21 colors and 11 sounds.