With a rounded, weighted base, these floodlights wobble—but don't fall over—when bumped.

Bring light to remote areas with the DeWalt rechargeable battery that's already in your toolkit.

Brighten remote areas using the same battery as your other cordless Milwaukee tools.

Brighten areas of a jobsite with these floodlights, and move them at a moment’s notice.

Brighten remote spaces with the DeWalt rechargeable battery that’s already in your toolkit. These floodlights extend up to 7 ft., and the light head turns at any angle to aim light where it’s needed.

Our brightest plug-in floodlights, these lights illuminate large worksites—about the size of a hockey rink.

Aim light where it's needed most in areas that don't have an electrical outlet.

Because these lights are compatible with DeWalt rechargeable batteries, you can keep one type of cordless tool battery on hand. Their head pivots to aim light where it's needed in areas that don't have electrical power service.

From pipes to pallet racks to control panels—these lights clamp onto almost anything and swivel to direct light just where you need it.

Keep excess cords out of your way—the reel locks the cord at any length and retracts it when not in use.

A flexible design allows these lights to be suspended above, wrapped around, or routed through areas on the job site.

Pop these lights on magnetic surfaces to brighten wet spaces. Rated NEMA 6 and ETL listed, you can splash, spray, or dunk them in water, and they’ll keep working.

Hang a string of lights overhead to brighten wet jobsites. IP rated, these lights are sealed to keep out dust and moisture from washdowns, splashes, and sprays, even outdoors.

Light up damp areas—these lights seal out moisture and humidity. They’ll even work in areas with frequent washdowns. Rated NEMA 4X, they withstand spraying liquid, resist corrosion, and keep out dust.

Safe to use in areas with ignitable concentrations of flammable or combustible gases, vapors, liquids, and dust, these lights are rated NEC Class I, Class II, and Zone 1.

Flood hazardous areas with light—these lights are intrinsically safe, meaning they can’t cause an explosion or fire. Rated NEC Class I, II, III, and Zone 0, they’re safe to use in areas with ignitable concentrations of flammable or combustible gases, dust, and fibers.

A wraparound lens disperses light from the sides as well as the bottom to produce ambient lighting.

Fit traditional fluorescent ceiling strip lights with LED lights, which use less electricity.

Don’t waste energy lighting unoccupied spaces—these lights turn on when they detect movement.

Powered by the sun, these lights illuminate outbuildings, shipping containers, and other remote places that lack electricity.

Link these lights together to create different shapes with a sleek look.

Upgrade your fluorescent recessed lighting to energy-efficient LEDs without removing fixtures and exposing insulation.

Maximize the light that reaches your shelving. Often used in storage rooms and warehouse rack rows, these lights have reflectors that direct all light downwards from ceilings up to 24 ft. high.

These lights mount to the wall so they're often used in enclosed spaces such as stairwells, hallways, and storage rooms.

Customize these lights to label doors or areas of a building.

Also known as pigtail holders. Temporarily wire these sockets to provide light during construction.

With a lower profile than other bay lights, linear bay lights mount closer to ceilings, providing more room for racks or shelving.

These lights produce a wide beam of uniform light to fill large, open areas with ceilings up to 18-ft. high.

Built for hot, hazardous areas such as steel mills and refineries, these lights work in temperatures up to 212° F. Rated NEC Classes I and II, they’re safe to use where there are ignitable concentrations of flammable or combustible gases, vapors, liquids, and dust.

Also known as jelly jar lights. These fixtures have a guard that protects the lens from breaking.

Illuminate harsh, wet areas, even outside in extreme weather—these lights are often used on ship building ports. Rated NEMA 4X and UL marine listed, they’re sealed against heavy rain and washdowns, and they won’t corrode from salt water or other liquids.

Also known as grow lights, these lights encourage growth in herbs, flowers, and other plants indoors.

Prevent contaminants from entering your ISO Class 3 clean room—these lights have an airtight seal.

Mount these lights flush with ceilings in wet locations—all are sealed to keep out humidity and dripping, splashing, and falling liquids. Unlike recessed can lights, which require a separate housing, these fit directly into a cutout in your ceiling and are held in place by springs.

Also known as jelly jar lights. These fixtures have a guard that protects the lens from breaking.

The articulating arm on these lights holds its position better than gooseneck-arm lights, especially around vibration.

Pivot the head to cast a narrow beam of light to exactly where it's needed.

Faster and easier to reposition than articulating-arm lights, these gooseneck-arm lights attach to your workspace for additional lighting.

These lights have a longer reach and hold their position better than gooseneck-arm lights, especially around vibration.

Similar in function to tubular machine lights, except strip machine lights have a flat lens that directs light downward.

These classic-style machine lights have a reflector to distribute light more evenly than strip machine lights.

Update conventional fluorescent tubular lights with newer LED technology. These lights are furnished with brackets that have the same hole pattern as most older lights for easy changeover.

Illuminate inline flow sights to inspect the color, clarity, and flow of liquids in food and beverage, brewery, chemical, and pharmaceutical processing lines.

Shine light into hard-to-reach spaces with these flexible-arm flashlights.

The smooth stainless steel surface allows for easy cleaning.

If the power goes out, you’ll find these flashlights right away.

Small enough to fit in your pocket.

When the power goes out, these flashlights automatically light up. The head tilts so you can aim light wherever you need it.

These flashlights are built to handle everyday use. They have a slip-resistant grip to ensure a secure hold.

Free your hands for other work by mounting a flashlight to a nearby surface.

Extend light into hard-to-reach spaces by attaching a fiber-optic cable to your flashlight.

Clip these little flashlights to any surface up to 1/2” thick and keep your hands free for work. They’re rated for use in environments where ignitable concentrations of flammable or combustible gases, vapors, and liquids are present.

Small enough to fit in your shirt pocket, these penlights safely light up work in explosion-prone areas. They’re rated for areas with ignitable concentrations of flammable or combustible gases, vapors, and liquids.

All of these flashlights stand up to wet environments.

Keep your hands free by wearing a flashlight on your head.

Light up work while staying visible in high-risk areas. These headlamps have LEDs on the head band so forklift and truck drivers can see you.

Clip these headlamps right into a mount on your tactical or rescue helmet.

Hardwire these lights to a power source.

Mount these lights near entry doors, loading areas, and driveways to cast an even glow of light.

Heads adjust to any angle so you can direct light where needed.

Powered by the sun, these security lights function in areas that don’t have access to electricity. They’re often used to shine light on parking lots, landscaping, signs, entryways, and other outdoor spaces.

A sealed head and switch keeps these lights shining in wet environments. They swing out from the wall and adjust horizontally and vertically to illuminate loading dock and trailers.

Safe to use in areas with ignitable concentrations of flammable or combustible gases, vapors, liquids, and dust, these lights are rated NEC Class I, II, and III.

Communicate a status at a glance by wiring these strip lights to change color when a part is malfunctioning inside your enclosure.

Mount add-on heads in remote areas to extend emergency lighting.

No need for wiring—these lights plug-in with a two-prong plug.

These lights are UL rated for use in hazardous locations where flammable/combustible gases, vapors, and liquids may be present.