Yellow zinc-plated steel is more corrosion resistant than nickel-plated steel.

Black-oxide steel has a dull shine for areas where appearance is a concern.

An economical choice for applications in corrosive environments that don't require high load capacities, these mounts have a plastic base.

Made of 303 stainless steel, these metric mounts resist corrosion from water and most chemicals.

Made entirely of 316 stainless steel, these metric mounts have superior corrosion resistance.

Punch-out holes in the base let you bolt down these metric mounts to keep your equipment stationary.

Well-suited to damp environments, these metric mounts have a stainless steel stud and nut for corrosion resistance.

An offset mounting hole allows for installation without moving your machine.

Use these mounts on heavy machines and equipment.

A hex nut at the base of the stud allows for easy height adjustment.

Made of 303 stainless steel, these metric mounts resist corrosion from water and most chemicals.

These mounts have a cushion on top to provide padding between your furniture and the mount.

Made entirely of plastic, these mounts are resistant to oil and won't scratch your mounting surface.

Often used on wobbly tables, these mounts automatically adjust up to 5/16" to compensate for uneven floors.

Higher deflection ratings translate to greater vibration and shock isolation.

Bolt these mounts down to keep your equipment stationary.

A two-piece design requires less clearance than one-piece mounts and simplifies installation—raise your machine just enough to slide the base underneath, then insert the stud from above.

Higher deflection ratings translate to greater vibration and shock isolation than our other vibration-damping leveling mounts.

Use these steel set screws for light duty holding.

These set screws have good chemical resistance.

Made from alloy steel, these inch size set screws have a thin edge that digs into hard surfaces for a secure hold.

Choose these set screws for their adherence to strict military standards for material and construction.

These metric 316 stainless steel set screws have excellent chemical resistance and can be used in saltwater environments.

These metric set screws have good chemical resistance.

More corrosion resistant than stainless steel, nickel alloy set screws have excellent resistance to salt water and some acids.

More corrosion resistant than 18-8 stainless steel set screws, these have excellent resistance to chemicals and salt water.

These inch size set screws are vented to allow fluid and gas to pass through.

Made from alloy steel, these metric set screws have a thin edge that digs into hard surfaces for a secure hold. They have a nylon locking patch that grips threads to resist loosening.

These metric 18-8 stainless steel set screws are chemical resistant. They have serrations on the cup edge that grip the material surface to resist loosening.

These alloy steel set screws have a thin edge that digs into hard surfaces for a secure hold. A nylon locking element grips threads to resist loosening.

More corrosion resistant than 18-8 stainless steel set screws, these have excellent resistance to chemicals and salt water.

These metric screws have a square head, so you can turn them by hand or use a wrench for more torque. Also known as half dog-point set screws, they have a protruding tip that locks within a mating hole or slot to keep parts aligned.

Turn these metric screws by hand using the hex head, or tighten them with a wrench for extra torque. With an extended tip that locks into a mating hole or slot—sometimes known as a dog point—they are often used to align and secure parts such as gears and pulley wheels.

These metric set screws have a protruding tip that locks within a mating hole or slot to keep parts aligned. They're also known as dog-point set screws.

Also known as dog-point set screws, these metric set screws have a protruding tip that locks within a mating hole or slot to keep parts aligned. Made of 18-8 stainless steel, they have good chemical resistance.

A nylon locking patch grips threads to resist loosening.

The tip is narrow to pass through threaded holes.

A low-profile flat-faced ball tip allows these metric set screw to be used in low-clearance applications.

The tip makes good contact on flat surfaces and allows you to make frequent adjustments with minimal surface damage.

These metric 18-8 stainless steel set screws are chemical resistant. The tip makes good contact on flat surfaces and allows you to make frequent adjustments with minimal surface damage.

These metric 316 stainless steel set screws have excellent chemical resistance and can be used in saltwater environments. The tip makes good contact on flat surfaces and allows you to make frequent adjustments with minimal surface damage.

These nylon set screws are chemical resistant, lightweight, and nonconductive. The tip makes good contact on flat surfaces and allows you to make frequent adjustments with minimal surface damage.

Made from nylon, these set screws are lightweight, resist chemicals, and won’t carry an electric current.

Strong and durable, these alloy steel set screws hold objects tightly against flat surfaces.

Made of alloy steel, these set screws are often used in U-shaped and V-shaped grooves and on other sloped or angled surfaces. The oval tip allows for frequent adjustments with minimal surface damage.

These metric set screws have a brass tip, which is harder than nylon and silver, for a secure hold on hard surfaces. The body has a black-oxide finish to resist corrosion in dry environments.

These set screws have a tip that is harder than nylon and silver to provide a secure hold on hard surfaces. The body is 18-8 stainless steel for good chemical resistance.

These chemical-resistant 18-8 stainless steel screws have an extra-soft nylon tip, which minimizes the damage that can occur from metal-on-metal contact. Use them on soft surfaces such as aluminum.

These alloy steel set screws have an extra-soft nylon tip, which minimizes the damage that can occur from metal-on-metal contact. Use them set screws on soft surfaces such as aluminum.

A rolling ball swivels 360° to minimize surface damage and allow for slight adjustments without loosening the screw.

Stainless steel set screws have excellent corrosion resistance in most environments.

These alloy steel set screws have a pointed tip that wedges into the contact surface for a secure hold on soft materials such as brass.

These metric 18-8 stainless steel set screws are chemical resistant. A pointed tip wedges into the contact surface for a secure hold on soft materials such as brass.

Stainless steel set screws have excellent corrosion resistance in most environments.

Add a flat mounting surface to a ball screw jack to support loads.

Attach these fittings to the end of a ball screw jack to create pivoting connections with clevis rod ends and other linkages.

Broad, strong Acme threads make these screw jacks better than ball screw jacks for heavy loads, intermittent positioning applications, and where vibration is present.

Wrench-adjustable jacks require less clearance to turn than bar-adjustable jacks.