We will reply to your message within an hour.
Mount these jacks to equipment to raise and level it.
A swivel caster lets you reposition your load.
Fit these compact jacks under low-height loads.
Wrench-adjustable jacks require less clearance to turn than bar-adjustable jacks.
The turning bar gives you leverage to lift heavier loads than wrench-adjustable screw jacks.
These jacks can be used to lift, spread, push, pull, and clamp.
Choose between two lifting points—use the toe for lifting loads low to the ground, or use the saddle when you need a higher, more stable lifting point.
Use these versatile jacks for lifting, spreading, bending, pushing, and straightening.
Pump the handle by hand to raise the jack. Turn the release valve to lower the load.
Jacks are equipped with two foot pedals for hands-free use, one to raise the ram and another to lower it.
With fewer moving parts than standard bottle jacks, these are made for frequent use.
These jacks have a short body to fit in low-clearance spaces.
Push or pry apart material with these rams by attaching them to a hydraulic pump.
Connect up to five rams to a single pump.
Jacks include a ram, a hand pump with hydraulic oil, a pressure gauge, and a hydraulic hose.
These jacks include extensions for increasing lift height and accessories for prying.
Connect a hose to a ram or pump.
Use these fittings with hydraulic hose.
This steel-reinforced hose has male threads.
Connect these pumps to a ram to create a hydraulic jack.
Control the flow of oil to adjust ram speed, or shut it off to temporarily hold a load.
Thread one of these plates onto your ram and use the four mounting holes to secure it in place.
As versatile as bottle jacks, but with two lifting points—a toe for lifting loads low to the ground, and a saddle for a higher, more stable lifting point.
Roll from job to job and under hard-to-reach places.
Use these rugged rubber lifting bags under heavy loads with less than 1" of clearance, on soft surfaces, and under water.
After raising a load, add these steel stands for support.
The ratcheting action makes adjusting these jacks under load easier than screw jack stands.
The screw adjustment allows you to make small changes to the height of your load.
Yellow zinc-plated steel is more corrosion resistant than nickel-plated steel.
Made of yellow zinc-plated steel, these metric leveling mounts are more corrosion resistant than nickel-plated steel leveling mounts.
Nickel-plated steel has some corrosion resistance.
Black-oxide steel has a dull shine for areas where appearance is a concern.
An economical choice for applications in corrosive environments that don't require high load capacities, these mounts have a plastic base.
Made of 303/304 stainless steel, these mounts resist corrosion from water and most chemicals.
Made of 303 stainless steel, these metric mounts resist corrosion from water and most chemicals.
Made entirely of 316 stainless steel, these mounts have superior corrosion resistance.
Made entirely of 316 stainless steel, these metric mounts have superior corrosion resistance.
Broader, stronger threads enable faster adjustments and higher load capacities than standard V-shaped threads.
Punch-out holes in the base let you bolt down these mounts to keep your equipment stationary.
Punch-out holes in the base let you bolt down these metric mounts to keep your equipment stationary.
Well-suited to damp environments, these mounts have a stainless steel stud and nut for corrosion resistance.
Well-suited to damp environments, these metric mounts have a stainless steel stud and nut for corrosion resistance.
An offset mounting hole allows for installation without moving your machine.
Made of 303 stainless steel, these mounts resist corrosion from water and most chemicals.
Made entirely of 316 stainless steel, these mounts are our most resistant to corrosion from chemicals, solvents, and water.
Well-suited to damp environments, these mounts have a stainless steel nut for excellent corrosion resistance.
Ready for installation on the bottom of machines and equipment without feet, these mounts come with their own bracket.
These mounts have fine threads that give you precise leveling control.
Choose from mounts that support 3,000 to 110,000 lbs. for heavy machinery.
Install these mounts on machines without feet.
A hex nut at the base of the stud allows for easy height adjustment.
Use these mounts on heavy machines and equipment.
Use these metric mounts on heavy machines and equipment.
Meant for light duty applications, these mounts are not rated for capacity.
Made entirely of plastic, these mounts are resistant to oil and won't scratch your mounting surface.
Often used on wobbly tables, these mounts automatically adjust up to 5/16" to compensate for uneven floors.
A shield on the stud prevents dirt accumulation on the threads and provides a finished appearance.
Able to withstand temperatures up to 350° F, these have the highest maximum temperature of our plastic mounts.
Protect surfaces from scratches and wear.
These mounts have a cushion on top to provide padding between your furniture and the mount.
Adjust the swivels on these mounts to level equipment on uneven surfaces for protection during earthquakes.
Designed for use in sanitary and food processing areas, these mounts level tanks and machinery on uneven floors and create space to clean underneath.
All-stainless steel construction stands up to water and chemicals and won't rust or corrode.
Thread these mounts into machinery to level them on uneven floors in sanitary environments such as food-processing areas.
Bolt these mounts down to keep your equipment stationary.
A two-piece design requires less clearance than one-piece mounts and simplifies installation—raise your machine just enough to slide the base underneath, then insert the stud from above.
Higher deflection ratings translate to greater vibration and shock isolation.
Choose from mounts that support 3,000 to 30,000 lbs. for heavy machinery.
A two-piece design simplifies installation and requires less clearance than one-piece mounts.
Higher deflection ratings translate to greater vibration and shock isolation than our other vibration-damping leveling mounts.
Insert these adjustable mounts into tube ends to level your equipment in a single step.
Broad, strong Acme threads make these screw jacks better than ball screw jacks for heavy loads, intermittent positioning applications, and where vibration is present.
The mounting plate provides a flat surface for supporting loads.
Low-friction ball bearings allow these screw jacks to use half the power required by an Acme screw jack to lift the same load. Typically used as actuators, they run at higher speeds than Acme screw jacks.
Made of ABS plastic, these wedges resist splitting and shattering, even in subzero temperatures.
These wedges won't damage materials such as wood and plastic.
These wedges won't damage materials such as fiberglass and metal.
Make quick height adjustments. Also known as fox and flange wedges.
Like the claw end of a hammer around a nail, these wedges grip studs or rods from both sides to give you leverage for prying apart two joined components.
These tools are often used for lifting and aligning machinery or to separate pipe flanges. They’re also known as banana wedges.
These tools are often used for lifting and aligning machinery or to separate pipe flanges. Also known as banana wedges.
Insert into a tight space and then squeeze the pump to inflate and pry objects apart.
The short, tapered tip is ideal for splitting, separating, and holding wood.
Support trench walls when installing pipes, cables, and other buried equipment.
Support beams and joists.
Precisely level heavy machines, surface plates, and other devices when accuracy is crucial.