McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    9 Products
    About Leveling Mounts
    industrial info icon

    Choose the right leveling mounts for your floor conditions, equipment weight, and vibration-control needs.

    Swivel Leveling Mounts with Threaded Stud

    Image of Product. Without Cushion. Front orientation. Leveling Mounts. Swivel Leveling Mounts with Threaded Stud, Without Cushion.
    Image of Product. With Cushion. Front orientation. Leveling Mounts. Swivel Leveling Mounts with Threaded Stud, With Cushion.

    Without Cushion

    With Cushion

    Keep equipment level on slightly sloped and pitted floors with mounts that have a ball-and-socket joint in the base. For mounting versatility, you can install them in either threaded holes or unthreaded through holes at the bottom of equipment.
    Nickel-Plated Steel Base—With a shiny appearance, these mounts create a finished look. They're best for dry environments since the nickel plating offers minimal corrosion resistance.
    Zinc-Yellow-Chromate-Plated Steel Base—More corrosion resistant than nickel-plated steel, these mounts are suitable for damp environments. However, they won’t hold up to chemical cleaners, high-pressure washdowns, and other harsh conditions like stainless steel can.
    303 Stainless Steel Base—The choice for most wet locations, these mounts can withstand repeated washdowns without corroding. However, they won't hold up to cleaning solutions that contain harsh chemicals like 316 stainless steel can.
    Rubber Cushion—A cushion under the base grips surfaces so vibrating equipment doesn't slide. It also protects floors from scrapes and gouges.
    Without Cushion
    With Rubber Cushion
    Thread Size
    Thread
    Lg., mm
    Swivel Range
    of Motion
    Base Dia.,
    mm
    Cap. per
    Mount, lb.
    Overall
    Ht., mm
    Each
    Cap. per
    Mount, lb.
    Overall
    Ht., mm
    Cushion
    Material
    Each
    Nickel-Plated Steel Base and Stud
    M30 × 3.5 mm1527.5°15242,5002226111K661000000032,250225Natural Rubber
    		6111K6720000000
     
    Zinc-Yellow-Chromate-Plated Steel Base and Stud
    M30 × 3.5 mm1527.5°15242,9902226301K4400000032,295225Natural Rubber
    		6301K47000000
     
    303 Stainless Steel Base and Stud
    M30 × 3.5 mm1527.5°152—————032,200225Natural Rubber
    		6301K121000000
     

    Seismic Stay-Put Swivel Leveling Mounts with Threaded Stud

    Image of Product. Front orientation. Leveling Mounts. Seismic Stay-Put Swivel Leveling Mounts with Threaded Stud, With Cushion.

    With Cushion

    Subjected to rigorous stress tests, these mounts withstand movement in every direction to minimize damage during an earthquake. After leveling your machine, bolt the mount to the floor and tighten the locking nut onto the base for added stability. The ball-and-socket joint in the base swivels to compensate for slightly sloped and pitted floors. For mounting versatility, you can install these mounts in either threaded holes or unthreaded through holes at the bottom of equipment.
    304 Stainless Steel Base—The choice for most wet locations, these mounts can withstand repeated washdowns without corroding. However, they won't hold up to cleaning solutions that contain harsh chemicals like 316 stainless steel can.
    Rubber Cushion—A cushion under the base protects floors from scrapes and gouges.
    With Rubber Cushion
    Mounting Holes
    Cap. per
    Mount, lb.
    Thread Size
    Thread
    Lg.
    Swivel Range
    of Motion
    Base
    Dia.
    No.
    of
    Fasteners
    Included
    Dia.
    Ctr.-to-Ctr.
    Lg.
    Specs.
    Met
    Load
    Pull
    Overall
    Ht.
    Cushion
    Material
    Each
    304 Stainless Steel Base and Stud
    M30 × 3.5 mm7 1/8"10°5 7/8"3No17/32"4 3/32"NZS 421913,4806,29011 3/8"Buna-N
    		7750N1110000000
     

    Shatter-Resistant Sights

    The window and body are made from a single piece of plastic, making these sights more shatter resistant than sights with a glass window. They are not rated for pressure.
    Plastic with Plastic Window
    Image of Product. Front orientation. Sights. Shatter-Resistant Sights.
    Thread Size
    Window
    Dia.
    Hex
    Size
    Max. Pressure
    @ Temp.
    Temp. Range,
    ° F
    For Use With
    Seal
    Material
    Each
    Metric Male
     
    With One-Piece Construction
    M30 × 1.5 mm7/8"1 3/16"Not Rated-20 to 210Water, Diesel Fuel, Hydraulic Fluid (Petroleum Based)Buna-N
    		5095K11500000
     

    Ultrasonic Transmitters

    Measure the distance to objects and the level of liquids and materials despite size, shape, or surface finish, and send that information to other parts of your system. Unlike photoelectric switches, which use light to detect objects, these transmitters emit high-frequency sound waves that target small spots, so the surface and structure of your object won’t affect results. This makes them great for materials with uneven surfaces, such as granules and powder. They also sense objects in dirty and wet places, but they don’t work well where there’s wind, since it could disrupt their sound waves. Use their plug to quickly connect and disconnect to cables with a socket (sold separately). UL listed, C-UL listed, and CE marked, they meet American, Canadian, and European safety standards.
    All transmitters have an analog output, which means they continuously send measurements to monitor status and manage components in your system.
    Rated IP67, all of these transmitters seal out dust and water if briefly submersed.
    Straight
    Image of Product. Front orientation. Ultrasonic Sensors. Ultrasonic Transmitters, Straight.
    Image of Specification. 4-Pole M12 Plug. Front orientation. 4 Poles.

    4-Pole

    M12

    Plug

    Digital—Some transmitters also have a digital output that signals your controller to turn components on or off whenever an object is detected or a set level is reached.
    IO-Link Communication Protocol—Transmitters with IO Link connect to a programmable logic controller (PLC), so you can remotely change settings and receive error messages. You need an IO-Link controller (not included) to connect.
    Sensors
    Cables
    with Socket
    No. of
    Outputs
    Signal
    Output
    Output Analog
    Signal
    Sensing
    Distance
    Input Voltage,
    V DC
    Control Communication
    Protocol
    Dia.,
    mm
    Lg.,
    mm
    Housing
    Material
    Circuit Protection
    Temp. Range,
    ° F
    Enclosure
    Rating
    Each
    Each
    With 4-Pole M12 Plug-In Connection
     
    Digital/Analog
    2PNP4 mA to 20 mA250 mm to 3.5 m10 to 30IO-Link30103Stainless Steel
    		Overload, Reverse Polarity, Short Circuit0 to 155IP67
    		7635N1800000006897K36000000
     
    back to top