Pumps for Hydraulic Jacks
Connect these pumps to a ram to create a hydraulic jack. Use hose to connect; add a pressure gauge to monitor hydraulic oil pressure levels and guard against overload.
Style 4, 5, and 6 pumps use air power to operate where electricity is not available and require minimal effort. Use the pedal with your hand or foot to activate and release your ram.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Pump | Mounting | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | Working Orientation | Oil Capacity, cu. in. | No. of Speeds | Lg. | Wd. | Ht. | Max. Pressure, psi | Pipe Size | Thread Type | Gender | Material | Fasteners Included | No. of Holes | Hole Dia. | Each | |
Air | ||||||||||||||||
4 | Horizontal | 36 | 1 | 14 3/4" | 5 5/8" | 5 3/4" | 10,000 | 3/8 | NPTF | Female | Aluminum, Steel | No | 4 | 5/16" | 00000000 | 000000000 |
5 | Horizontal | 90 | 1 | 10 5/8" | 5 3/4" | 8 1/8" | 10,000 | 3/8 | NPTF | Female | Aluminum, Steel | No | 4 | 3/8" | 00000000 | 000000 |
6 | Horizontal | 127 | 1 | 13 5/8" | 6 1/2" | 8 3/8" | 10,000 | 3/8 | NPTF | Female | Aluminum, Steel | No | 4 | 3/16" | 00000000 | 00000000 |
Air-Powered Lifting Bags
Use these rugged rubber lifting bags under heavy loads with less than 1" of clearance. They also work well on soft surfaces and under water. To increase lift height, stack with an additional bag.
For technical drawings and 3-D models, click on a part number.
Lifting Bags | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Capacity | Base | Air Inlet | Replacement Bags | |||||||||||
tons | lbs. | Ht. | Max. Lift | Lg. | Wd. | Max. Pressure, psi | Coupling Type | Pipe Size | Gender | Material | Each | Each | ||
1 1/2 | 3,000 | 3/4"-3" | 2 1/4" | 6" | 6" | 150 | Quick Disconnect | 3/8 | Female | Rubber | 000000000 | 000000000 | 000000000 | 0000000 |
3 1/2 | 7,000 | 3/4"-3 1/2" | 2 3/4" | 12" | 6" | 150 | Quick Disconnect | 3/8 | Female | Rubber | 000000000 | 00000000 | 000000000 | 000000 |
8 | 16,000 | 7/8"-6 3/8" | 5 1/2" | 12" | 12" | 150 | Quick Disconnect | 3/8 | Female | Rubber | 000000000 | 00000000 | 000000000 | 00000000 |
13 1/2 | 27,000 | 7/8"-8 1/8" | 7 1/4" | 15" | 15" | 150 | Quick Disconnect | 3/8 | Female | Rubber | 000000000 | 00000000 | 000000000 | 00000000 |
19 | 38,000 | 7/8"-9" | 8 1/8" | 21" | 15" | 150 | Quick Disconnect | 3/8 | Female | Rubber | 000000000 | 00000000 | 000000000 | 00000000 |
38 | 76,000 | 7/8"-13" | 12 1/8" | 24" | 24" | 150 | Quick Disconnect | 3/8 | Female | Rubber | 000000000 | 00000000 | 000000000 | 00000000 |
Replacement Hose | 000000000 | Each | 0000000 |
Air-Powered Hydraulic Lifting Jacks with Wheels
Roll this jack from job to job and under hard-to-reach places. It uses air pressure to raise loads with less effort than other jacks.
Note: Jacks should not be moved when under load.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Capacity | Saddle | Base | Air Inlet | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
tons | lbs. | Ht. | Max. Lift | Type | Movement | Dia. | Lg. | Wd. | Ht. | Handle Lg. | Air Pressure, psi | Air Hose Lg., ft. | Hose Connection Type | Pipe Size | Gender | Body Material | Wheel Material | Each | |
22 | 44,000 | 9 3/4"-19 1/4" | 9 1/2" | Flat | Rigid | 2" | 22 7/8" | 12 1/2" | 7" | 48 3/4" | 110-150 | 3 | Quick-Disconnect | 1/4 | Male | Steel | Plastic | 00000000 | 0000000 |
Air-Powered Hydraulic Bottle Jacks
These jacks use air pressure to raise loads with less effort than other bottle jacks. They can also be operated manually.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Capacity | Base | Air Inlet | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
tons | lbs. | Ht. | Max. Lift | Ram OD | Lg. | Wd. | Handle Lg. | Air Pressure, psi | Air Hose Lg., ft. | Hose Connection Type | Pipe Size | Gender | Body Material | Features | Each | |
12 | 24,000 | 9 1/2"-18 1/2" | 9" | 1 3/4" | 7 7/8" | 6 1/4" | 24" | 110-175 | 4 | Quick-Disconnect | 1/4 | Male | Steel | Manual Override, Removable Handle | 00000000 | 0000000 |
20 | 40,000 | 9 3/4"-18 3/4" | 9" | 2 1/4" | 8 1/2" | 7 1/8" | 24" | 110-175 | 4 | Quick-Disconnect | 1/4 | Male | Steel | Manual Override, Removable Handle | 00000000 | 000000 |
30 | 60,000 | 11"-18 1/8" | 7 1/8" | 2 1/2" | 10 1/4" | 8 1/4" | 38 1/8" | 110-175 | 4 | Quick-Disconnect | 1/4 | Male | Steel | Manual Override, Removable Handle | 00000000 | 000000 |
Design-Your-Own Stationary Air-Lift Tables
Choose your table based on capacity, then choose the type of control that best suit your application. You'll also need a tabletop. No hydraulics, motors, or pumps to maintain and no electrical connection required, just connect these tables to your compressed air system. Durable air bags provide consistent and smooth lifting. A relief valve prevents pressure build-up to provide overload protection.
Lift table bellows (sold separately) protect the working parts of the table from dust, dirt, and debris.
Warning: Never use to lift people.
Capacity, lbs. | Lg. | Wd. | Ht. | Frame Ga. | Material | Air Pressure, psi | Flow Rate | Air Inlet Pipe Size | Air Inlet Thread Type | Air Inlet Gender | Each | |
1,000 | 35 1/2" | 47" | 7"-32" | 3 | Steel | 80 | 15 cfm @ 80 psi | 1/2 | NPT | Female | 000000 | 000000000 |
2,000 | 35 1/2" | 47" | 7"-32" | 3 | Steel | 80 | 15 cfm @ 80 psi | 1/2 | NPT | Female | 000000 | 00000000 |
3,000 | 35 1/2" | 47" | 7"-32" | 3 | Steel | 80 | 15 cfm @ 80 psi | 1/2 | NPT | Female | 000000 | 00000000 |
Ht. | Material | Frame Material | Flexibility | Color | Protects Against | Mounting Fasteners Included | Each | |
7"-32" | Vinyl Fabric | Plastic | Flexible | Black/Yellow | Abrasive Grit, Coolant, Debris, Dust, Metal Chips, Oil, Salt Water, Wood Chips | No | 000000 | 000000000 |
Stationary Air-Lift Tables
Tables come ready to operate with no hydraulics, motors, or pumps to maintain and no electrical connection required. These tables connect to your compressed air system. Durable air bags provide consistent and smooth lifting. A relief valve prevents pressure build-up to provide overload protection.
Lift table bellows (sold separately) protect the working parts of the table from dust, dirt, and debris.
Warning: Never use to lift people.
Lift Tables | Lift Table Bellows | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Capacity, lbs. | Lg. | Wd. | Ht. | Tabletop Ga. | Material | Air Pressure, psi | Flow Rate | Air Inlet Pipe Size | Air Inlet Thread Type | Air Inlet Gender | Each | Each | ||
2,000 | 48" | 48" | 8"-32" | 3 | Steel | 80 | 15 cfm @ 80 psi | 1/4 | NPT | Female | 00000000 | 000000000 | 0000000 | 000000000 |
4,000 | 48" | 48" | 8"-32" | 3 | Steel | 80 | 15 cfm @ 80 psi | 1/4 | NPT | Female | 00000000 | 00000000 | 0000000 | 00000000 |
Air-Powered Stationary Lift Tables
Connect these tables to your compressed air system; a hydraulic pump and an air-driven motor make repetitive lifting and positioning less of a chore. Tables have a compact design, so they fit in confined spaces.
Lift table bellows (sold separately) protect the working parts of the table from dust, dirt, and debris.
Warning: Never use to lift people.
Lift Tables | Lift Table Bellows | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Capacity, lbs. | Lg. | Wd. | Ht. | Tabletop Ga. | Material | Air Pressure, psi | Air Inlet Pipe Size | Air Inlet Thread Type | Air Inlet Gender | Elevation Speed, in./sec. | Hose Lg., ft. | Control Cord Lg., ft. | Specifications Met | Each | Each | ||
550 | 32" | 19 1/2" | 6"-28" | 13 | Steel | 40 | 1/4 | NPT | Female | 1/2 | 6 | 6 | ANSI MH 29.1 | 0000000 | 000000000 | 0000000 | 0000000 |
660 | 40" | 20" | 9 1/2"-54" | 10 | Steel | 40 | 1/4 | NPT | Female | 3/4 | 6 | 6 | ANSI MH 29.1 | 0000000 | 00000000 | 0000000 | 00000000 |
1,100 | 40" | 20" | 6"-31 1/2" | 10 | Steel | 40 | 1/4 | NPT | Female | 1/2 | 6 | 6 | ANSI MH 29.1 | 0000000 | 00000000 | 0000000 | 00000000 |
Air-Powered Wire Rope Hoists
These hoists are quieter and more stable than air-powered chain hoists. Change or hold the speed at any time during operation, so you can start the hoist softly and gradually decelerate. Hoists have a cool-running motor for continuous operation. The brake stops the load and holds it in place when you're not lifting. The gears are enclosed to protect them from debris and contamination for smooth operation.
Warning: Never use to lift people or items over people.
Capacity | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
tons | lbs. | Lift Lg., ft. | Lifting Speed, fpm | Clearance | Hook Opening Wd. | Inlet Thread Type | Inlet Pipe Size | Air Consumption @ Pressure | Duty Cycle | Wire Rope Dia. | Each | |
Cast Iron with Enclosed Gears | ||||||||||||
1/8 | 300 | 7 | 36 | 23" | 7/8" | NPT | 3/8 | 21.2 cfm @ 90 psi | Continuous Use | 5/32" | 0000000 | 000000000 |
Variable-Speed Precise-Positioning Compact Air-Powered Chain Hoists
Change or hold the speed at any time during operation so you can start the hoist softly and gradually decelerate. They are small and lightweight so you can easily move them between jobs. Hoists have a cool-running motor for continuous operation. The brake stops the load and holds it in place when you're not lifting, and overload protection prevents hoists from operating if the load exceeds capacity.
A filter-regulator-lubricator (not included) is required to lubricate the gears and clean and regulate the incoming air.
Warning: Never use to lift people or items over people.
Capacity | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
tons | lbs. | Lifting Speed, fpm | Clearance | Hook Opening Wd. | Inlet Thread Type | Inlet Pipe Size | Air Consumption @ Pressure | Duty Cycle | Specifications Met | 10-ft. Lift | 15-ft. Lift | 20-ft. Lift | |
Aluminum with Chain Container and Overload Protection | |||||||||||||
CM ShopAir | |||||||||||||
0.15 | 300 | 31 | 11" | 1" | NPT | 3/8 | 34 cfm @ 90 psi | Continuous Use | ASME B30.16, ASME HST-5, CSA B167 | 0000000 | |||
1/4 | 500 | 21 | 11" | 1" | NPT | 3/8 | 34 cfm @ 90 psi | Continuous Use | ASME B30.16, ASME HST-5, CSA B167 | 0000000 | |||
0.3 | 600 | 16 | 12" | 1" | NPT | 3/8 | 34 cfm @ 90 psi | Continuous Use | ASME B30.16, ASME HST-5, CSA B167 | 0000000 | |||
1/2 | 1,000 | 11 | 12" | 1" | NPT | 3/8 | 34 cfm @ 90 psi | Continuous Use | ASME B30.16, ASME HST-5, CSA B167 | 0000000 |
For Inlet Thread Type | For Inlet Pipe Size | Each | |
NPT | 3/8 | 0000000 | 0000000 |
For Inlet Thread Type | For Inlet Pipe Size | Each | |
NPT | 3/8 | 0000000 | 000000 |
Spark-Resistant Air-Powered Chain Hoists
These hoists have an aluminum body, stainless steel chain, and bronze hooks for spark resistance. They have a cool-running motor for continuous operation. The brake stops the load and holds it in place when you're not lifting.
Hoists with overload protection will not operate when the load exceeds capacity.
A filter-regulator-lubricator (not included) is required to lubricate the gears and clean and regulate the incoming air.
Warning: Never use to lift people or items over people.
Capacity | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
tons | lbs. | Lifting Speed, fpm | Clearance | Hook Opening Wd. | Inlet Thread Type | Inlet Pipe Size | Air Consumption @ Pressure | Duty Cycle | Specifications Met | 10-ft. Lift | 15-ft. Lift | 20-ft. Lift | |
Aluminum | |||||||||||||
CM Budgit 2200 with Pull Lever | |||||||||||||
3/8 | 750 | 60 | 16" | 1 1/8" | NPT | 3/8 | 48 cfm @ 90 psi | Continuous Use | ASME B30.16, ASME HST-5, CSA B167 | 0000000 | |||
Aluminum with Overload Protection | |||||||||||||
CM Budgit 6000 with Lever | |||||||||||||
1/2 | 1,000 | 16 | 17" | 1 1/4" | NPT | 3/4 | 80 cfm @ 90 psi | Continuous Use | ASME B30.16, ASME HST-5, CSA B167 | 0000000 | |||
1 | 2,000 | 8 | 22" | 1 1/4" | NPT | 3/4 | 80 cfm @ 90 psi | Continuous Use | ASME B30.16, ASME HST-5, CSA B167 | 0000000 |
Air-Powered Chain Hoists
Hoists have a cool-running motor for continuous operation. The brake stops the load and holds it in place when you're not lifting.
Hoists with overload protection will not operate when the load exceeds capacity.
Cast iron hoists have a durable housing for longer life than aluminum hoists.
A filter-regulator-lubricator (not included) is required to lubricate the gears and clean and regulate the incoming air.
Warning: Never use to lift people or items over people.
Capacity | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
tons | lbs. | Lifting Speed, fpm | Clearance | Hook Opening Wd. | Inlet Thread Type | Inlet Pipe Size | Air Consumption @ Pressure | Duty Cycle | Specifications Met | 10-ft. Lift | 15-ft. Lift | 20-ft. Lift | |
Aluminum with Chain Container | |||||||||||||
CM Budgit 2200 with Lever Control | |||||||||||||
1/4 | 500 | 65 | 16" | 1 1/8" | NPT | 3/8 | 48 cfm @ 90 psi | Continuous Use | ASME B30.16, ASME HST-5, CSA B167 | 000000 | |||
1/2 | 1,000 | 45 | 16" | 1 1/8" | NPT | 3/8 | 48 cfm @ 90 psi | Continuous Use | ASME B30.16, ASME HST-5, CSA B167 | 000000 | |||
1 | 2,000 | 23 | 18" | 1 1/4" | NPT | 3/8 | 48 cfm @ 90 psi | Continuous Use | ASME B30.16, ASME HST-5, CSA B167 | 000000 | |||
CM Budgit 2200 with Pull Control | |||||||||||||
1/4 | 500 | 65 | 16" | 1 1/8" | NPT | 3/8 | 48 cfm @ 90 psi | Continuous Use | ASME B30.16, ASME HST-5, CSA B167 | 000000 | |||
1/2 | 1,000 | 45 | 16" | 1 1/8" | NPT | 3/8 | 48 cfm @ 90 psi | Continuous Use | ASME B30.16, ASME HST-5, CSA B167 | 000000 | |||
CM Budgit 6000 with Lever Control | |||||||||||||
2 | 4,000 | 15 | 22" | 1 3/8" | NPT | 3/4 | 80 cfm @ 90 psi | Continuous Use | ASME B30.16, ASME HST-5, CSA B167 | 000000 | |||
Cast Iron with Chain Container and Overload Protection | |||||||||||||
Harrington TCR with Lever Control | |||||||||||||
1/4 | 500 | 68 | 19" | 1 1/8" | NPT | 1/2 | 63 cfm @ 90 psi | Continuous Use | ASME B30.10, ASME B30.16, ASME HST-5 | 0000000 | |||
1/2 | 1,000 | 68 | 19" | 1 1/8" | NPT | 1/2 | 63 cfm @ 90 psi | Continuous Use | ASME B30.10, ASME B30.16, ASME HST-5 | 0000000 | |||
1 | 2,000 | 37 | 19" | 1 1/8" | NPT | 1/2 | 62 cfm @ 90 psi | Continuous Use | ASME B30.10, ASME B30.16, ASME HST-5 | 0000000 | |||
2 | 4,000 | 19 | 22" | 1 1/8" | NPT | 1/2 | 62 cfm @ 90 psi | Continuous Use | ASME B30.10, ASME B30.16, ASME HST-5 | 0000000 | |||
Harrington TCR with Pull Control | |||||||||||||
1/4 | 500 | 68 | 19" | 1 1/8" | NPT | 1/2 | 63 cfm @ 90 psi | Continuous Use | ASME B30.10, ASME B30.16, ASME HST-5 | 0000000 | |||
1/2 | 1,000 | 68 | 19" | 1 1/8" | NPT | 1/2 | 63 cfm @ 90 psi | Continuous Use | ASME B30.10, ASME B30.16, ASME HST-5 | 0000000 | |||
1 | 2,000 | 37 | 19" | 1 1/8" | NPT | 1/2 | 62 cfm @ 90 psi | Continuous Use | ASME B30.10, ASME B30.16, ASME HST-5 | 0000000 | |||
2 | 4,000 | 19 | 22" | 1 1/8" | NPT | 1/2 | 62 cfm @ 90 psi | Continuous Use | ASME B30.10, ASME B30.16, ASME HST-5 | 0000000 |
Heavy Duty Air-Powered Winches for Wire Rope—For Lifting
These winches operate longer and require shorter breaks than standard air-powered winches. Because they run on compressed air, they give you longer operating times than electric winches. They have an automatic brake that holds the load when the motor stops. To lift, mount winches above the load, or use winches with a pulley that’s mounted above the load. Enclosed gears offer protection from dirt and debris.
For wire rope, see Wire Rope with Hook for Winches.
Note: Capacity is highest for the first layer of rope (at least five wraps of rope on the winch) and decreases as each additional layer of rope is wound on the winch.
Warning: Never use to lift people or items over people.
Inlet | |||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Max. Cap., lbs. | Fully Wound Cap., lbs. | Min. Line Speed, fpm | For Max. Rope Lg., ft. | For Rope Dia. | O'all Wd. | O'all Lg. | O'all Ht. | Material | Rope with Hook Included | Air Hose Included | Air Consumption @ Pressure | Gender | Thread Type | Pipe Size | Features | Each | |
30 Minutes On, 10 Minutes Off | |||||||||||||||||
1,500 | 1,000 | 40 | 170 | 1/4" | 17 1/2" | 21 1/2" | 12 1/2" | Aluminum, Steel | No | No | 100 cfm @ 90 psi | Female | NPT | 1/2 | Reversible Pulling Directions | 0000000 | 000000000 |
Air-Powered Winches for Wire Rope—For Lifting
Because this winch runs on compressed air, it gives you a longer operating time than electric winches. It has an automatic brake that holds the load when the motor stops. To lift, mount winch above the load, or use winch with a pulley that’s mounted above the load. Enclosed gears offer protection from dirt and debris.
For wire rope, see Wire Rope with Hook for Winches.
Note: Capacity is highest for the first layer of rope (at least five wraps of rope on the winch) and decreases as each additional layer of rope is wound on the winch.
Warning: Never use to lift people or items over people.
Inlet | |||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Max. Cap., lbs. | Fully Wound Cap., lbs. | Min. Line Speed, fpm | For Max. Rope Lg., ft. | For Rope Dia. | O'all Wd. | O'all Lg. | O'all Ht. | Material | Rope with Hook Included | Air Hose Included | Air Consumption @ Pressure | Gender | Thread Type | Pipe Size | Features | Each | |
15 Minutes On, 45 Minutes Off | |||||||||||||||||
2,000 | 1,200 | 13 | 90 | 5/16" | 8 7/8" | 14 3/8" | 15" | Aluminum, Steel | No | No | 80 cfm @ 100 psi | Female | NPT | 1/2 | Reversible Pulling Directions | 00000000 | 000000000 |