Line-Shaft Conveyors | McMaster-Carr

Filter by

Length

Between Frame Width

Overall Width

Roller Diameter

Voltage

Shaft Type

Color

Shaft Diameter

Component

Construction

Width

Roller Spacing

Axle Shape

Material

Body OD

Roller Width

Export Control Classification Number (ECCN)

EAR99

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

RoHS

Compliant

Not Compliant

DFARS Specialty Metals

Exempt

REACH

Compliant

Not Compliant

Weight Capacity per Length

Speed

Hex Axle Size

Axle Grip Type

Height

162 Products

Motorized Roller Conveyors

Also known as line-shaft conveyors, these conveyors are driven by a drive shaft and round belts. Unlike belt conveyors, these have built-in accumulation, so packages can build up without crashing into one another or falling off the conveyor. The rollers are designed to smoothly transfer totes, packages, and other lightweight material. Shipping tubes, drums, and pails are less likely to get stuck in between rollers than between skate wheels.

Mix and match stands and conveyors to form straight lines, curve around obstacles, or create inclines. Only straight conveyor sections contain a motor, but they can power up to 60 ft. of conveyor extensions on either side. The motor can be reversed to send material in either direction.

Note: Weight capacities are based on an evenly distributed load. The length of the material you’re conveying should be at least three times the roller spacing.

Fixed Speed Straight Conveyor


		Replacement Stands

Fixed-speed conveyors travel at 60 fpm, a common industry rate, to move material.

Three-Phase Motor—Conveyors with three-phase motors balance power more evenly than single-phase motors, so they can handle heavier loads. While a conveyor with a single-phase motor may lag when a heavy load reaches the conveyor, a conveyor with a three-phase motor will continue smoothly.

	Wd.		Roller		Ht.						3 ft. Long
	Overall	Between Frame	Spacing	Projection	Frame	Overall	Power, hp	Speed, fpm	No. of Stands Included	Features	Wt. Cap. Per Lg. (No. of Stands Req.)		Each
1.9" Dia. Galvanized Steel Rollers—7/16" Hex Axle







				120V AC—Single-Phase Motor (Plug In)

				16"	13"	3"	1/4"	5 1/2"	36" to 48"	1/2	60	2	Connecting Plates, On/Off Switch	40 lb/ft (2)	5898K301	000000000


				17"	14"	3"	1/4"	5 1/2"	36" to 48"	1/2	60	2	Connecting Plates, On/Off Switch	40 lb/ft (2)	5898K302	00000000
				19"	16"	3"	1/4"	5 1/2"	36" to 48"	1/2	60	2	Connecting Plates, On/Off Switch	40 lb/ft (2)	5898K303	00000000
				21"	18"	3"	1/4"	5 1/2"	36" to 48"	1/2	60	2	Connecting Plates, On/Off Switch	40 lb/ft (2)	5898K304	00000000
				25"	22"	3"	1/4"	5 1/2"	36" to 48"	1/2	60	2	Connecting Plates, On/Off Switch	40 lb/ft (2)	5898K305	00000000
				29"	26"	3"	1/4"	5 1/2"	36" to 48"	1/2	60	2	Connecting Plates, On/Off Switch	40 lb/ft (2)	5898K306	00000000
				31"	28"	3"	1/4"	5 1/2"	36" to 48"	1/2	60	2	Connecting Plates, On/Off Switch	40 lb/ft (2)	5898K307	00000000
				35"	32"	3"	1/4"	5 1/2"	36" to 48"	1/2	60	2	Connecting Plates, On/Off Switch	40 lb/ft (2)	5898K308	00000000
				41"	38"	3"	1/4"	5 1/2"	36" to 48"	1/2	60	2	Connecting Plates, On/Off Switch	40 lb/ft (2)	5898K309	00000000




						240/460V AC—Three-Phase Motor (Hardwire)

						16"	13"	3"	1/4"	5 1/2"	36" to 48"	1/2	60	2	Connecting Plates	40 lb/ft (2)	5898K11	00000000


						17"	14"	3"	1/4"	5 1/2"	36" to 48"	1/2	60	2	Connecting Plates	40 lb/ft (2)	5898K201	00000000
						19"	16"	3"	1/4"	5 1/2"	36" to 48"	1/2	60	2	Connecting Plates	40 lb/ft (2)	5898K21	00000000
						21"	18"	3"	1/4"	5 1/2"	36" to 48"	1/2	60	2	Connecting Plates	40 lb/ft (2)	5898K202	00000000
						25"	22"	3"	1/4"	5 1/2"	36" to 48"	1/2	60	2	Connecting Plates	40 lb/ft (2)	5898K31	00000000
						29"	26"	3"	1/4"	5 1/2"	36" to 48"	1/2	60	2	Connecting Plates	40 lb/ft (2)	5898K203	00000000
						31"	28"	3"	1/4"	5 1/2"	36" to 48"	1/2	60	2	Connecting Plates	40 lb/ft (2)	5898K204	00000000
						35"	32"	3"	1/4"	5 1/2"	36" to 48"	1/2	60	2	Connecting Plates	40 lb/ft (2)	5898K81	00000000
						41"	38"	3"	1/4"	5 1/2"	36" to 48"	1/2	60	2	Connecting Plates	40 lb/ft (2)	5898K205	00000000

Replacements for Conveyors

Replacement Stands

				Conveyor Mounting Slot
	Ht.	Conveyor Mounting Fasteners Included	No. of Conveyor Mounting Holes	Lg.	Wd.	Mounting Hole Ctr.-to-Ctr.	Floor Mounting Fasteners Included	No. of Floor Mounting Holes	Floor Mounting Hole Dia.		Each
For 16" Overall Width



		30 1/4" to 42 1/4"	Yes	4	1"	7/16"	4"	No	4	9/16"	5898K781	0000000


		For 17" Overall Width



				30 1/4" to 42 1/4"	Yes	4	1"	7/16"	4"	No	4	9/16"	5898K788	000000


				For 19" Overall Width



						30 1/4" to 42 1/4"	Yes	4	1"	7/16"	4"	No	4	9/16"	5898K782	000000


						For 21" Overall Width



								30 1/4" to 42 1/4"	Yes	4	1"	7/16"	4"	No	4	9/16"	5898K789	000000


								For 25" Overall Width



										30 1/4" to 42 1/4"	Yes	4	1"	7/16"	4"	No	4	9/16"	5898K784	000000


										For 29" Overall Width



												30 1/4" to 42 1/4"	Yes	4	1"	7/16"	4"	No	4	9/16"	5898K791	000000


												For 31" Overall Width



														30 1/4" to 42 1/4"	Yes	4	1"	7/16"	4"	No	4	9/16"	5898K792	000000


														For 35" Overall Width



																30 1/4" to 42 1/4"	Yes	4	1"	7/16"	4"	No	4	9/16"	5898K787	000000


																For 41" Overall Width



																		30 1/4" to 42 1/4"	Yes	4	1"	7/16"	4"	No	4	9/16"	5898K793	000000

Component		Each
Coupling Chain	5898K73	000000

	For Conveyor Type
Drive Belts


Straight Section	5898K912	00000

Roller Drive Belts


—	5898K97	0000

Component		Each
Drive Spool	5898K71	00000

Component		Each
Drive Spool Retaining Clip	5898K72	00000

Variable Speed Straight Conveyor


		Replacement Stands

Variable-speed conveyors adjust from standard conveyor speeds down to 25 fpm, so they’re often used to slow material flow for quality checks.

	Wd.		Roller		Ht.						3 ft. Long
	Overall	Between Frame	Spacing	Projection	Frame	Overall	Power, hp	Speed, fpm	No. of Stands Included	Features	Wt. Cap. Per Lg. (No. of Stands Req.)		Each
1.9" Dia. Galvanized Steel Rollers—7/16" Hex Axle







				120V AC—Single-Phase Motor (Plug In)

				16"	13"	3"	1/4"	5 1/2"	36" to 48"	1/2	25 to 60	2	Connecting Plates, On/Off Switch	40 lb/ft (2)	7532N11	000000000


				17"	14"	3"	1/4"	5 1/2"	36" to 48"	1/2	25 to 60	2	Connecting Plates, On/Off Switch	40 lb/ft (2)	7532N12	00000000
				19"	16"	3"	1/4"	5 1/2"	36" to 48"	1/2	25 to 60	2	Connecting Plates, On/Off Switch	40 lb/ft (2)	7532N13	00000000
				21"	18"	3"	1/4"	5 1/2"	36" to 48"	1/2	25 to 60	2	Connecting Plates, On/Off Switch	40 lb/ft (2)	7532N14	00000000
				25"	22"	3"	1/4"	5 1/2"	36" to 48"	1/2	25 to 60	2	Connecting Plates, On/Off Switch	40 lb/ft (2)	7532N15	00000000
				29"	26"	3"	1/4"	5 1/2"	36" to 48"	1/2	25 to 60	2	Connecting Plates, On/Off Switch	40 lb/ft (2)	7532N16	00000000
				31"	28"	3"	1/4"	5 1/2"	36" to 48"	1/2	25 to 60	2	Connecting Plates, On/Off Switch	40 lb/ft (2)	7532N17	00000000
				35"	32"	3"	1/4"	5 1/2"	36" to 48"	1/2	25 to 60	2	Connecting Plates, On/Off Switch	40 lb/ft (2)	7532N18	00000000
				41"	38"	3"	1/4"	5 1/2"	36" to 48"	1/2	25 to 60	2	Connecting Plates, On/Off Switch	40 lb/ft (2)	7532N19	00000000

Replacements for Conveyors

Replacement Stands

				Conveyor Mounting Slot
	Ht.	Conveyor Mounting Fasteners Included	No. of Conveyor Mounting Holes	Lg.	Wd.	Mounting Hole Ctr.-to-Ctr.	Floor Mounting Fasteners Included	No. of Floor Mounting Holes	Floor Mounting Hole Dia.		Each
For 17" Overall Width



		30 1/4" to 42 1/4"	Yes	4	1"	7/16"	4"	No	4	9/16"	5898K788	0000000


		For 21" Overall Width



				30 1/4" to 42 1/4"	Yes	4	1"	7/16"	4"	No	4	9/16"	5898K789	000000


				For 29" Overall Width



						30 1/4" to 42 1/4"	Yes	4	1"	7/16"	4"	No	4	9/16"	5898K791	000000


						For 31" Overall Width



								30 1/4" to 42 1/4"	Yes	4	1"	7/16"	4"	No	4	9/16"	5898K792	000000


								For 41" Overall Width



										30 1/4" to 42 1/4"	Yes	4	1"	7/16"	4"	No	4	9/16"	5898K793	000000

Component		Each
Coupling Chain	5898K73	000000

	For Conveyor Type
Drive Belts


Straight Section	5898K912	00000

Roller Drive Belts


—	5898K97	0000

Component		Each
Drive Spool	5898K71	00000

Component		Each
Drive Spool Retaining Clip	5898K72	00000

Conveyor Extension


		Replacement Stands

	Wd.		Roller		Ht.				3 ft. Long		4 ft. Long		5 ft. Long		7 ft. Long		8 ft. Long		10 ft. Long
	Overall	Between Frame	Spacing	Projection	Frame	Overall	Wt. Cap. per Lg., lb/ft	Features		Each		Each		Each		Each		Each		Each
1.9" Dia. Galvanized Steel Rollers—7/16" Hex Axle



		16"	13"	3"	1/4"	5 1/2"	36" to 48"	40	Connecting Plates	5898K401	0000000	5898K411	0000000	5898K12	0000000	5898K13	000000000	5898K421	000000000	5898K14	000000000


		17"	14"	3"	1/4"	5 1/2"	36" to 48"	40	Connecting Plates	5898K402	000000	5898K412	000000	5898K431	000000	5898K436	00000000	5898K422	00000000	5898K442	00000000
		19"	16"	3"	1/4"	5 1/2"	36" to 48"	40	Connecting Plates	5898K403	000000	5898K413	000000	5898K22	000000	5898K23	00000000	5898K423	00000000	5898K24	00000000
		21"	18"	3"	1/4"	5 1/2"	36" to 48"	40	Connecting Plates	5898K404	000000	5898K414	000000	5898K432	000000	5898K437	00000000	5898K424	00000000	5898K443	00000000
		25"	22"	3"	1/4"	5 1/2"	36" to 48"	40	Connecting Plates	5898K405	000000	5898K415	000000	5898K32	000000	5898K33	00000000	5898K425	00000000	5898K34	00000000
		29"	26"	3"	1/4"	5 1/2"	36" to 48"	40	Connecting Plates	5898K406	000000	5898K416	000000	5898K433	00000000	5898K438	00000000	5898K426	00000000	5898K444	00000000
		31"	28"	3"	1/4"	5 1/2"	36" to 48"	40	Connecting Plates	5898K407	000000	5898K417	000000	5898K434	00000000	5898K439	00000000	5898K427	00000000	5898K445	00000000
		35"	32"	3"	1/4"	5 1/2"	36" to 48"	40	Connecting Plates	5898K408	000000	5898K418	000000	5898K82	00000000	5898K83	00000000	5898K428	00000000	5898K84	00000000
		41"	38"	3"	1/4"	5 1/2"	36" to 48"	40	Connecting Plates	5898K409	000000	5898K419	000000	5898K435	00000000	5898K441	00000000	5898K429	00000000	5898K446	00000000

Replacements for Conveyors

Replacement Stands

				Conveyor Mounting Slot
	Ht.	Conveyor Mounting Fasteners Included	No. of Conveyor Mounting Holes	Lg.	Wd.	Mounting Hole Ctr.-to-Ctr.	Floor Mounting Fasteners Included	No. of Floor Mounting Holes	Floor Mounting Hole Dia.		Each
For 16" Overall Width



		30 1/4" to 42 1/4"	Yes	4	1"	7/16"	4"	No	4	9/16"	5898K781	0000000


		For 17" Overall Width



				30 1/4" to 42 1/4"	Yes	4	1"	7/16"	4"	No	4	9/16"	5898K788	000000


				For 19" Overall Width



						30 1/4" to 42 1/4"	Yes	4	1"	7/16"	4"	No	4	9/16"	5898K782	000000


						For 21" Overall Width



								30 1/4" to 42 1/4"	Yes	4	1"	7/16"	4"	No	4	9/16"	5898K789	000000


								For 25" Overall Width



										30 1/4" to 42 1/4"	Yes	4	1"	7/16"	4"	No	4	9/16"	5898K784	000000


										For 29" Overall Width



												30 1/4" to 42 1/4"	Yes	4	1"	7/16"	4"	No	4	9/16"	5898K791	000000


												For 31" Overall Width



														30 1/4" to 42 1/4"	Yes	4	1"	7/16"	4"	No	4	9/16"	5898K792	000000


														For 35" Overall Width



																30 1/4" to 42 1/4"	Yes	4	1"	7/16"	4"	No	4	9/16"	5898K787	000000


																For 41" Overall Width



																		30 1/4" to 42 1/4"	Yes	4	1"	7/16"	4"	No	4	9/16"	5898K793	000000

	For Conveyor Type
Drive Belts


Straight Section	5898K912	00000

Roller Drive Belts


—	5898K97	0000

Component		Each
Drive Spool	5898K71	00000

Component		Each
Drive Spool Retaining Clip	5898K72	00000

90° Curved Conveyor

Image of Attribute. Front orientation. Contains Annotated.

Replacement Stands

90° curved conveyors have tapered rollers that keep packages centered.

	Wd.				Ht.
	Overall	Between Frame	Radius	Roller Projection	Frame	Overall	Wt. Cap. Per Lg. (No. of Stands Req.)	No. of Stands Included	Features		Each
1.9" Dia. Galvanized Steel Rollers—7/16" Hex Axle



		16"	13"	36"	1/4"	5 1/2"	36" to 48"	40 lb/ft (3)	1	Connecting Plates	5898K18	000000000


		17"	14"	36"	1/4"	5 1/2"	36" to 48"	40 lb/ft (3)	1	Connecting Plates	5898K501	00000000
		19"	16"	36"	1/4"	5 1/2"	36" to 48"	40 lb/ft (3)	1	Connecting Plates	5898K28	00000000
		21"	18"	36"	1/4"	5 1/2"	36" to 48"	40 lb/ft (3)	1	Connecting Plates	5898K502	00000000
		25"	22"	36"	1/4"	5 1/2"	36" to 48"	40 lb/ft (3)	1	Connecting Plates	5898K38	00000000
		29"	26"	36"	1/4"	5 1/2"	36" to 48"	40 lb/ft (3)	1	Connecting Plates	5898K503	00000000
		31"	28"	36"	1/4"	5 1/2"	36" to 48"	40 lb/ft (3)	1	Connecting Plates	5898K504	00000000
		35"	32"	36"	1/4"	5 1/2"	36" to 48"	40 lb/ft (3)	1	Connecting Plates	5898K85	00000000
		41"	38"	36"	1/4"	5 1/2"	36" to 48"	40 lb/ft (3)	1	Connecting Plates	5898K505	00000000

Replacements for Conveyors

Replacement Stands

				Conveyor Mounting Slot
	Ht.	Conveyor Mounting Fasteners Included	No. of Conveyor Mounting Holes	Lg.	Wd.	Mounting Hole Ctr.-to-Ctr.	Floor Mounting Fasteners Included	No. of Floor Mounting Holes	Floor Mounting Hole Dia.		Each
For 16" Overall Width



		30 1/4" to 42 1/4"	Yes	4	1"	7/16"	4"	No	4	9/16"	5898K781	0000000


		For 17" Overall Width



				30 1/4" to 42 1/4"	Yes	4	1"	7/16"	4"	No	4	9/16"	5898K788	000000


				For 19" Overall Width



						30 1/4" to 42 1/4"	Yes	4	1"	7/16"	4"	No	4	9/16"	5898K782	000000


						For 21" Overall Width



								30 1/4" to 42 1/4"	Yes	4	1"	7/16"	4"	No	4	9/16"	5898K789	000000


								For 25" Overall Width



										30 1/4" to 42 1/4"	Yes	4	1"	7/16"	4"	No	4	9/16"	5898K784	000000


										For 29" Overall Width



												30 1/4" to 42 1/4"	Yes	4	1"	7/16"	4"	No	4	9/16"	5898K791	000000


												For 31" Overall Width



														30 1/4" to 42 1/4"	Yes	4	1"	7/16"	4"	No	4	9/16"	5898K792	000000


														For 35" Overall Width



																30 1/4" to 42 1/4"	Yes	4	1"	7/16"	4"	No	4	9/16"	5898K787	000000


																For 41" Overall Width



																		30 1/4" to 42 1/4"	Yes	4	1"	7/16"	4"	No	4	9/16"	5898K793	000000

	For Conveyor Type
Drive Belts


Curved Section	5898K911	00000

Component		Each
Drive Spool	5898K71	00000

Component		Each
Drive Spool Retaining Clip	5898K72	00000

Motor-Operated Conveyor Belt Spools


Blue One-Piece for Round Shafts	White One-Piece for Round Shafts	Black One-Piece for Keyed Shafts	Red Two-Piece for Round Shafts	Green Two-Piece for Round Shafts

Replace the spools that hold round belts in place on motor-operated conveyors.

Two Piece—Spools with two-piece construction are easier to install than regular spools. Snap the two halves closed over the shaft.

For Keyed Shafts—Keyed spools lock into place and won’t slip on shafts. Often used for curves and inclines.

Body OD—The larger a spool’s body OD, the faster its transmission speed.

				For Keyway
	Body OD	Lg.	For Shaft Dia.	Wd.	Dp.	Material	Color		Each
One Piece







				For Round Shafts

				1 7/32"	1 1/4"	1"	—	—	Acetal	Blue	1297N2	00000


				1 7/32"	1 1/4"	1"	—	—	Acetal	White	1297N1	0000
				1 7/32"	1 5/8"	1"	—	—	Acetal	White	1297N9	0000
				1 21/32"	1 3/4"	1"	—	—	Acetal	Blue	1297N7	00000
				1 21/32"	1 3/4"	1 7/16"	—	—	Acetal	Blue	1297N8	00000




						For Keyed Shafts

						1 3/16"	1 1/4"	1"	0.25"	0.125"	Acetal	Black	1297N11	0000


						Two Piece







										For Round Shafts

										1 7/32"	1 1/4"	1"	—	—	Acetal	Red	1297N3	0000


										1 11/16"	1 5/8"	1"	—	—	Acetal	Green	1297N4	0000

Motor-Operated Conveyor Belt Spool Clips

Image of Product. Front orientation. Conveyor Belt Spool Clips.

Clamp this clip onto the shaft to keep spools from slipping, preventing wear on the belt.

For Shaft Dia.	Lg.	Material	Color		Each
1"	1/2"	Nylon	Black	1297N5	00000

Motor-Operated Conveyor Belt Spool Connectors

Image of Product. Front orientation. Conveyor Belt Spool Connectors.

Lock multiple spools together to increase drive power.

For Shaft Dia.	Lg.	Material		Each
1"	2"	Steel	1297N6	00000

Motorized Round-Groove Conveyor Rollers

Also known as drive rollers, these connect to rollers with two grooves to power conveyors. The bearings are quiet-rolling to reduce conveyor noise and are shielded to keep out dirt and debris.

24V DC—Continuous Duty Cycle with Up to 30 Starts and Stops per Minute


Hex Axle Galvanized Steel Rollers

			Roller							Bearing
	For Between Frame Wd.	For Belt Dia.	Wd.	Ga.	Wt. Cap., lb.	Bearing-to-Groove Wd.	Groove Ctr.-to-Ctr. Wd.	Overall Wd.	Wire Lead Lg.	Seal Type	Material	Temp. Range, ° F	Features	Includes	Choose a Speed, fpm		Each
7/16" Hex Axle







				1.9" Dia. Galvanized Steel Rollers

				13"	3/16"	12.88"	16	70	2.50"	1.3"	14"	19"	Shielded	Steel	32 to 100	Integrated Current-Limiting Circuit, Quiet-Rolling Bearings	Zone Control Card	4 to 70, 6 to 114, 8 to 163	2250T45	0000000


				16"	3/16"	15.888"	16	70	2.50"	1.3"	17"	19"	Shielded	Steel	32 to 100	Integrated Current-Limiting Circuit, Quiet-Rolling Bearings	Zone Control Card	4 to 70, 6 to 114, 8 to 163	2250T463	000000
				21"	3/16"	20.88"	16	70	2.50"	1.3"	22"	19"	Shielded	Steel	32 to 100	Integrated Current-Limiting Circuit, Quiet-Rolling Bearings	Zone Control Card	4 to 70, 6 to 114, 8 to 163	2250T467	000000
				22"	3/16"	21.88"	16	70	2.50"	1.3"	23"	19"	Shielded	Steel	32 to 100	Integrated Current-Limiting Circuit, Quiet-Rolling Bearings	Zone Control Card	4 to 70, 6 to 114, 8 to 163	2250T472	000000
				27"	3/16"	26.88"	16	70	2.50"	1.3"	28"	19"	Shielded	Steel	32 to 100	Integrated Current-Limiting Circuit, Quiet-Rolling Bearings	Zone Control Card	4 to 70, 6 to 114, 8 to 163	2250T473	000000
				31"	3/16"	30.88"	16	70	2.50"	1.3"	32"	19"	Shielded	Steel	32 to 100	Integrated Current-Limiting Circuit, Quiet-Rolling Bearings	Zone Control Card	4 to 70, 6 to 114, 8 to 163	2250T561	000000

120V AC (Single-Phase Motor)—3 Seconds On, 2 Seconds Off Duty Cycle


Hex Axle Zinc-Plated Steel Rollers

			Roller							Bearing
	For Between Frame Wd.	For Belt Dia.	Wd.	Ga.	Wt. Cap., lb.	Bearing-to-Groove Wd.	Groove Ctr.-to-Ctr. Wd.	Overall Wd.	Wire Lead Lg.	Seal Type	Material	Temp. Range, ° F	Features	Includes	Choose a Speed, fpm		Each
7/16" Hex Axle







				1.9" Dia. Zinc-Plated Steel Rollers

				13"	3/16"	12 7/16"	16	120	2.17"	1.3"	14 1/16"	2"	Shielded	Steel	14 to 100	Quiet-Rolling Bearings	Terminal Block	33, 53, 67	2298T21	0000000


				21"	3/16"	20 7/16"	16	75	2.17"	1.3"	22 1/16"	2"	Shielded	Steel	14 to 100	Quiet-Rolling Bearings	Terminal Block	33, 53, 67	2298T22	000000

Heavy Duty Motorized Roller Conveyors

Move pallets, drums, racks, and other heavy items around your facility with these conveyors. Also known as chain-driven live roller conveyors, they have sprocketed rollers connected to a drive chain to move heavy loads. The sprockets minimize slipping, so these conveyors can smoothly move loads that are four times heavier than what you can move with our standard motorized roller conveyors. All have an adjustable speed range that goes as slow as 15 fpm, so you can slow material down to perform quality checks.

Note: Weight capacities are based on an evenly distributed load. The length of the material you’re conveying should be at least three times the roller spacing.

Variable Speed Straight Conveyor

	Wd.									5 ft. Long			10 ft. Long
	Overall	Between Frame	Roller Chain Trade No.	Roller Spacing	Frame Ht.	Power, hp	Speed, fpm	No. of Stands Included	Features	Wt. Cap. Per Lg. (No. of Stands Req.)		Each	Wt. Cap. Per Lg. (No. of Stands Req.)		Each
2 1/2" Dia. Steel Rollers—11/16" Hex Axle







				120V AC—Three-Phase Motor (Plug In)

				60 1/4"	43"	60	4 1/2"	6"	1 1/2	15 to 60	0	Chain Guard, On/Off Switch	290 lb/ft (2)	5886N11	000000000	290 lb/ft (3)	5886N12	000000000


				60 1/4"	43"	60	6"	6"	1 1/2	15 to 60	0	Chain Guard, On/Off Switch	290 lb/ft (2)	5886N13	00000000	290 lb/ft (3)	5886N14	00000000
				68 1/4"	51"	60	4 1/2"	6"	1 1/2	15 to 60	0	Chain Guard, On/Off Switch	290 lb/ft (2)	5886N15	00000000	290 lb/ft (3)	5886N16	00000000
				68 1/4"	51"	60	6"	6"	1 1/2	15 to 60	0	Chain Guard, On/Off Switch	290 lb/ft (2)	5886N17	00000000	290 lb/ft (3)	5886N18	00000000

Replacements for Conveyors

Conveyor Extension

Conveyor extensions expand the length of your set up. Add extensions to each side, but the drive section must remain at the center of the conveyor’s length. Extend conveyors with 4 _1/2" roller spacing up to 50 feet long and conveyors with 6" roller spacing up to 70 feet long.

	Wd.							5 ft. Long			10 ft. Long
	Overall	Between Frame	Roller Chain Trade No.	Roller Spacing	Frame Ht.	No. of Stands Included	Features	Wt. Cap. Per Lg. (No. of Stands Req.)		Each	Wt. Cap. Per Lg. (No. of Stands Req.)		Each
2 1/2" Dia. Steel Rollers—11/16" Hex Axle



		51 1/2"	43"	60	4 1/2"	6"	0	Chain Guard	290 lb/ft (1)	5886N101	000000000	290 lb/ft (2)	5886N102	000000000


		51 1/2"	43"	60	6"	6"	0	Chain Guard	290 lb/ft (1)	5886N103	00000000	290 lb/ft (2)	5886N104	00000000
		59 1/2"	51"	60	4 1/2"	6"	0	Chain Guard	290 lb/ft (1)	5886N105	00000000	290 lb/ft (2)	5886N106	00000000
		59 1/2"	51"	60	6"	6"	0	Chain Guard	290 lb/ft (1)	5886N107	00000000	290 lb/ft (2)	5886N108	00000000

Stationary Stand

Stands adjust in height for a flexible conveyor set up.

					Conveyor Mounting Slot			Floor Mounting
Height	Material	Color	Conveyor Mounting Fasteners Included	No. of Conveyor Mounting Holes	Lg.	Wd.	Conveyor Mounting Hole Ctr.-to-Ctr.	Fasteners Included	No. of Holes	Hole Dia.		Each







			For 43" Between Frame Width

			12" to 14 5/8"	Powder-Coated Steel	Blue	Yes	4	1"	7/16"	3"	No	2	9/16"	5886N201	0000000


			14" to 18 5/8"	Powder-Coated Steel	Blue	Yes	4	1"	7/16"	3"	No	2	9/16"	5886N202	000000
			19" to 27 5/8"	Powder-Coated Steel	Blue	Yes	4	1"	7/16"	3"	No	2	9/16"	5886N203	000000
			25" to 37 5/8"	Powder-Coated Steel	Blue	Yes	4	1"	7/16"	3"	No	2	9/16"	5886N204	000000




					For 51" Between Frame Width

					12" to 14 5/8"	Powder-Coated Steel	Blue	Yes	4	1"	7/16"	3"	No	2	9/16"	5886N205	000000


					14" to 18 5/8"	Powder-Coated Steel	Blue	Yes	4	1"	7/16"	3"	No	2	9/16"	5886N206	000000
					19" to 27 5/8"	Powder-Coated Steel	Blue	Yes	4	1"	7/16"	3"	No	2	9/16"	5886N207	000000
					25" to 37 5/8"	Powder-Coated Steel	Blue	Yes	4	1"	7/16"	3"	No	2	9/16"	5886N208	000000

Ready-to-Run Flexible Roller Conveyors

Expand, retract, and curve these conveyors wherever you need them—they’re ready to run once you plug them in. These conveyors are ideal in situations where you need flexibility, such as loading and unloading trucks, connecting two trailers, or extending an existing line that you've outgrown. They have rollers to convey objects of different shapes and sizes in assembly, packaging, and shipping applications. To save space, these conveyors compress down to 8 _1/2 ft. when they are not in use. They’re sometimes kept in storage as a backup line, so you can pull them out if other conveyors unexpectedly shut down.

Grab the handles at each end to move these conveyors into place. The legs adjust to your desired height. Connecting hooks on each end can fasten them to other conveyors. Lock the casters to keep them in place. A knob on the controller face lets you adjust the speed. To prevent damage, sensors at the end of the conveyor will stop the rollers if a package is nearing the edge.

Note: Weight capacities are based on an evenly distributed load. The length of the material you’re conveying should be at least three times the roller spacing.

Variable Speed Flexible Conveyor

Image of Specification. Front orientation. Ready-to-Run Flexible Roller Conveyors.

Replacement Rollers

	Conveyors											Replacement Rollers
	Wd.		Roller						102" to 288" Long			Roller
	Overall	Between Frame	Spacing	Projection	Overall Ht.	Power, hp	Speed, fpm	Features	Wt. Cap. Per Lg. (No. of Stands Req.)		Each	Wd.	Ga.		Each
1 1/2" Dia. Zinc-Plated Steel Rollers—1/2" Dia. Round Axle







				120V AC— Plug In

				34"	30"	5"	1/4"	30" to 42"	1/8	0 to 120	Package Stop, Connecting Hooks, Emergency Stop, Handles, On/Off Switch, Sensor	145 lb/ft (0)	4910N11	0000000000	28 15/32"	16	4910N12	000000

Replacements for Conveyors

1.9" Diameter Motorized Conveyor Rollers

Add power to a gravity conveyor or build a custom powered conveyor. Rollers can be hardwired to operate in either direction. They have shielded bearings to keep out dust and debris.

120V AC (Single-Phase Motor)—Continuous Duty

		Roller					Bearing
	For Between Frame Wd.	Wd.	Ga.	Wt. Cap., lb.	Overall Wd.	Wire Lead Lg.	Seal Type	Material	Temp. Range, ° F	Includes	Choose a Speed, fpm		Each
7/16" Hex Axle







				1.9" Dia. Zinc-Plated Steel Rollers

				13"	12 3/8"	17	140	14 1/4"	2"	Shielded	Zinc-Plated Steel	15 to 100	Terminal Block	33, 53, 67	1711N21	0000000


				16"	15 3/8"	17	140	17 1/4"	2"	Shielded	Zinc-Plated Steel	15 to 100	Terminal Block	33, 53, 67	1711N22	000000
				22"	21 7/16"	17	95	23 1/4"	2"	Shielded	Zinc-Plated Steel	15 to 100	Terminal Block	33, 53, 67	1711N23	000000

	Dia.	Color	Material		Each
Drive Belts



	13 3/16"	0.21"	Orange	Polyurethane Rubber	4910N14	00000


	Roller Drive Belts



			12 11/16"	0.21"	Clear	Polyurethane Rubber	4910N15	0000

	Power, hp	Voltage, V AC		Each
Three-Phase Motor



	Totally Enclosed Fan-Cooled (TEFC)	1 1/2	240/460	5886N901	000000000