A thumb screw locks the slide to prevent movement in systems where vibration is present.

Two micrometer handles ensure accurate, repeatable positioning along two axes—good for positioning parts, such as measuring and inspecting equipment, that are part of a larger automated system.

Three micrometer handles ensure accurate, repeatable positioning along three axes—good for positioning parts, such as measuring and inspecting equipment, that are part of a larger automated system.

Use these slides in a variety of manual-positioning applications for laboratory and production equipment as well as for positioning parts for drilling, fastening, assembly, and measuring.

These carriages and guide rails are steel.

Designed specifically for use on horizontal surfaces, the contact angle of the ball bearings on the rail allows these carriages to last longer than other carriages.

Made of stainless steel, these carriages and guide rails are more corrosion resistant than steel carriages and guide rails.

A plastic cage surrounds the ball bearings and keeps them from colliding, so these carriages run for many cycles without needing maintenance.

With a wide base and low-profile design, these carriages and guide rails stabilize moment (twisting) and off-center loads better than other carriages and rails. They're good for use in areas where multiple carriages or rails won't fit.

With a plastic cage that surrounds the ball bearings to prevent them from colliding, these extra-wide carriages run quietly for many cycles without needing maintenance. All of these carriages have a wide base and low-profile design to stabilize moment (twisting) and off-center loads better than other carriages.

Threaded inserts secure the bearing to the carriage and prevent it from loosening due to frequent starts and stops.

Use these carriages and guide rails in temperatures up to 300° F.

A handle on the side of the carriage locks the carriage in place.

C-shaped guide rails grip the carriage around the outside to support linear motion along walls and other vertical surfaces.

Threaded inserts secure the bearing to the carriage and prevent it from loosening due to frequent starts and stops.

For applications with low clearance, these carriages protrude less than 5 mm above their rails.

A handle on the side of the carriage locks the carriage in place.

V-shaped rollers and rails allow these carriages to operate well in dirty environments because the debris won't get trapped on the rail.

High-temperature PTFE-thickened grease enables these carriages to operate in temperatures up to 500° F, higher than any other carriage that we offer.

Nylon rollers provide low-friction movement for light loads and corrosive environments.

Mount along a wall or other vertical surface.

Create a self-aligning carriage and guide rail system to compensate for mounting surfaces that aren't parallel.

Precisely position work on X- and Y-axes using the handles.

With PTFE sleeve bearings and a low-friction ball screw, these slides don’t require the mess and maintenance of lubrication but still give you precise positioning anywhere along the length of their stroke.

With two bearings mounted in a single housing, these bearings have higher load capacities than standard ones. A ceramic liner helps them achieve high speeds as well as rapid acceleration and deceleration.

Virtually maintenance free, these bearings have slippery, chemical-resistant liners that don't require added lubrication.

Designed to handle heavy loads, these bearings have higher load capacities than comparable standard mounted linear ball bearings for support rail shafts.

Outdoor as well as mild chemical environments are no problem for these bearings. They have stainless steel balls for corrosion resistance.

Designed to handle heavy loads, these bearings have the highest load capacities of any mounted linear ball bearings we offer.

With two bearings mounted in a single housing, these bearings have load capacities more than 10 times as high as standard mounted linear sleeve bearings. A ceramic liner helps them achieve high speeds as well as rapid acceleration and deceleration.

The Frelon liner on these bearings allows them to stand up to a wider range of chemicals than other flange-mounted linear sleeve bearings.

A ceramic coating makes high speeds as well as rapid acceleration and deceleration possible.

The flanged housing makes these bearings a good solution for vertical linear motion applications.

Made from a single piece of slippery UHMW plastic, these bearings have no cracks or crevices so they’re easy to clean.