A handle on the side of the carriage locks the carriage in place.

With a wide base, these sleeve bearing carriages stabilize moment (twisting) and off-center loads better than standard carriages. Use in areas where multiple carriages or rails won't fit.

For applications with low clearance, these carriages protrude less than 5 mm above their rails.

Mate with a T-slotted rail to add linear motion to your assembly.

Threaded inserts secure the bearing to the carriage and prevent it from loosening due to frequent starts and stops.

The square profile prevents loads from twisting and rotating.

Build loops, circuits, and curved paths in assembly stations and other repetitive processes.

Made of stainless steel, these carriages and guide rails are more corrosion resistant than steel carriages and guide rails.

Made of stainless steel, these carriages and guide rails are more corrosion resistant than steel carriages and guide rails.

Suitable for clean room use, these carriages and guide rails are made entirely of stainless steel.

Designed for use on horizontal surfaces, the contact angle of the ball bearings on the rail allows these carriages to last longer than other carriages.

These tiny carriages and guide rails are sized for electronic and other precision applications.

With a plastic cage that surrounds the ball bearings to prevent them from colliding, these extra-wide carriages run quietly for many cycles without needing maintenance. All of these carriages have a wide base and low-profile design to stabilize moment (twisting) and off-center loads better than other carriages.

These track roller carriages and guide rails are stainless steel for use in wet, corrosive environments.

Create a self-aligning carriage and guide rail system to compensate for mounting surfaces that aren't parallel.

A handle on the side of the carriage locks the carriage in place.

Nylon rollers provide low-friction movement for light loads and corrosive environments.

Combine with a T-slotted rail to add linear motion to your assembly.

A linear scale and micrometer-like hand wheel measure travel distance in increments of 0.001".

A thumb screw locks the slide to prevent movement in systems where vibration is present.

Two micrometer handles ensure accurate, repeatable positioning along two axes—good for positioning parts, such as measuring and inspecting equipment, that are part of a larger automated system.

Three micrometer handles ensure accurate, repeatable positioning along three axes—good for positioning parts, such as measuring and inspecting equipment, that are part of a larger automated system.

With a row of crossed-roller bearings on each side of the rail, these slides have over twice the load capacity of standard low-friction slides and are better for handling shock loads.

With PTFE sleeve bearings and a low-friction ball screw, these slides don’t require the mess and maintenance of lubrication but still give you precise positioning anywhere along the length of their stroke.