Chemicals will not affect these two-part epoxies. They repair cracked, worn, and damaged surfaces. The size listed is the combined total of the two parts.

A high silver content allows these surface fillers to conduct electricity and heat. Use them to fill gaps and rebuild missing material on electrical connections or to assemble new components.

Surface fillers in one-time-use packets and jars come as two parts. The size listed is the combined total of the two parts.

Volume resistivity and surface resistivity measure how well a material opposes the flow of electricity. The lower the rating, the more electricity it conducts.

Thermal conductivity measures a material’s ability to transfer heat. The higher the rating, the more heat it transfers.

Make castings and fill voids with these two-part pourable epoxies. The size listed is the combined total of the two parts.

Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ORDER HISTORY after your order ships.

These surface fillers can be used on vertical surfaces without sagging. They repair cracked, worn, and damaged surfaces. The size listed is the combined total of the two parts.

Devcon Plastic Steel® Liquid can repair areas where brazing and welding is impractical.

Mix these two-part epoxy surface fillers to create a strong repair in wet environments or underwater. Use them to repair cracked, worn, and damaged surfaces. Size listed is the combined total of the two parts.

Putty fillers come in a stick with a resin on the outside and a hardener on the inside. Cut the desired amount from the sticks, knead to a uniform color to mix, and press into place.

Use these two-part fillers to rebuild cracked or worn plastic surfaces. The size listed is the combined total of the two parts.

Surface fillers in a stick have a resin on the outside and a hardener on the inside. Cut the desired amount from the sticks, knead to a uniform color to mix, and press into place. Use with most rigid and semi-rigid types of plastic. They meet NSF/ANSI 61 for use with drinking water.

Fill gaps up to 0.02" to secure worn unthreaded cylindrical metal parts such as shafts, bearings, and press-fit assemblies. These retaining compounds begin to harden once coated surfaces are pressed together, blocking exposure to air.

Primer (sold separately) cleans the surface and decreases the time to reach full strength. It is recommended when working with aluminum, stainless steel, and titanium; black-oxide finishes, and cadmium and zinc coatings.

Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ORDER HISTORY after your order ships.

Even on oily surfaces, these retaining compounds keep their hold. Use them to fill gaps up to 0.015" to secure worn cylindrical metal parts such as shafts, bearings, and press-fit assemblies. These retaining compounds begin to harden once coated surfaces are pressed together, blocking exposure to air. They meet NSF/ANSI 61 safety standards for use with drinking water systems.

Primer (sold separately) cleans the surface and decreases the time to reach full strength. It is recommended when working with aluminum, stainless steel, and titanium; black-oxide finishes, and cadmium and zinc coatings.

Fill gaps up to 0.01" to secure unthreaded cylindrical metal parts such as shafts, bearings, and press-fit assemblies. These retaining compounds begin to harden once coated surfaces are pressed together, blocking exposure to air.

Primer (sold separately) cleans the surface and decreases the time to reach full strength. It is recommended when working with aluminum, stainless steel, and titanium; black-oxide finishes, and cadmium and zinc coatings.

Even on oily surfaces, these retaining compounds keep their hold. Use them to fill gaps up to 0.01" to secure worn cylindrical metal parts such as shafts, bearings, and press-fit assemblies. These retaining compounds begin to harden once coated surfaces are pressed together, blocking exposure to air.

Primer (sold separately) cleans the surface and decreases the time to reach full strength. It is recommended when working with aluminum, stainless steel, and titanium; black-oxide finishes, and cadmium and zinc coatings.

Compounds with low locking strength prevent threads from loosening due to vibration and can be adjusted without tools.

Compounds with high locking strength require both heat and a hand tool to unthread.

An alternative to solder, these flexible, silver-filled adhesives accommodate joint movement. Use them to bond electrical components and repair circuits.

Epoxy adhesives are two-part adhesives that need to be mixed together. The size listed is the combined total of the two parts.

Thermoplastic adhesives are one-part adhesives that don’t need to be mixed. Dry to the touch and faster and easier to apply than two-part adhesives, they’re best for use on automated assembly lines. Often used to join solar cells in solar panels, these adhesives make instant electrical connections without flux at lower temperatures than soldering. Since they attach to solar cells with heat and slight pressure, they limit stress cracks that can form when soldering. These adhesives can also be used as a bridge between multiple solar panels.

Protect metal with these low-odor, water-based, UV-resistant coatings. They contain 316 stainless steel flakes, which provide durability and superior corrosion resistance. Apply with a brush, roller, or sprayer.