How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
Continuous-Swivel Threaded Hose Fittings for Hydraulic Fluid
Also known as live swivels, these fittings have ball bearings, so they can swivel continuously 360° before and after installation. This not only makes installation easier, but also eliminates the twisting and kinking that can cause premature hose failure. Fittings are threaded on both ends so you can connect them directly to a threaded hose end or to pumps, cylinders, and other equipment in your hydraulic system. They are zinc-plated steel, which has excellent strength and durability. Fittings have fair corrosion resistance.
Fittings with a 37° flared end are also known as JIC (Joint Industrial Council) fittings and meet JIC standards for dimensions.
NPTF (Dryseal) threads are compatible with NPT threads. UN/UNF (SAE Straight) male threads have a gasket to protect against leaks. They are also known as O-ring boss threads.

- Maximum Pressure: See table
- Temperature Range: -15° to 250° F
Male Tube Connection | Female Tube Connection | |||||||
---|---|---|---|---|---|---|---|---|
For Tube OD | Thread Size | Dash Size | For Tube OD | Thread Size | Dash Size | Max. Pressure | Each | |
Zinc-Plated Steel | ||||||||
3/8" | 9/16"-18 | 06 | 3/8" | 9/16"-18 | 06 | 5,000 psi @ 72° F | 00000000 | 0000000 |
1/2" | 3/4"-16 | 08 | 1/2" | 3/4"-16 | 08 | 5,000 psi @ 72° F | 00000000 | 000000 |
5/8" | 7/8"-14 | 10 | 5/8" | 7/8"-14 | 10 | 5,000 psi @ 72° F | 00000000 | 000000 |
3/4" | 1 1/16"-12 | 12 | 3/4" | 1 1/16"-12 | 12 | 4,500 psi @ 72° F | 00000000 | 000000 |
1" | 1 5/16"-12 | 16 | 1" | 1 5/16"-12 | 16 | 4,000 psi @ 72° F | 00000000 | 000000 |

- Maximum Pressure: See table
- Temperature Range: See table
Pipe Size | Dash Size | Max. Pressure | Temperature Range, °F | Each | |
Zinc-Plated Steel | |||||
---|---|---|---|---|---|
1/4 | 04 | 3,000 psi @ 72° F | -40° to 250° | 00000000 | 0000000 |
3/8 | 06 | 3,000 psi @ 72° F | -40° to 250° | 00000000 | 000000 |
1/2 | 08 | 3,000 psi @ 72° F | -40° to 250° | 00000000 | 000000 |
3/4 | 12 | 3,000 psi @ 72° F | -40° to 250° | 00000000 | 000000 |
1 | 12 | 4,000 psi @ 72° F | -15° to 250° | 00000000 | 000000 |
Continuous-Swivel Threaded Hose Fittings for Chemicals and Petroleum
Built with ball bearings, these fittings continuously swivel 360° before and after installation to prevent your hose from twisting, kinking, and failing. Rotate them as needed to thread them onto hose ends, pumps, nozzles, and other equipment in your system. Also known as live swivels. They’re made of 316 stainless steel, so they won’t corrode from a wide variety of chemicals, as well as fuels, gasoline, and oil.

- For Use With: Boric Acid, Citric Acid, Diesel Fuel, Ethanol, Fuel Oil, Gasoline, Hydraulic Fluid, Isopropyl Alcohol, Mineral Oil, Sodium Hydroxide
- Maximum Pressure: 150 psi @ 72° F
- Maximum Vacuum: 29 in. of Hg @ 72° F
- Temperature Range: -20° to 300° F
Metal Cam-and-Groove Hose Couplings for Chemicals and Petroleum
Made of metal, these couplings have better durability than plastic cam-and-groove couplings. A complete coupling consists of a plug and a socket (both sold separately) that allow you to quickly connect and disconnect medium-to large-diameter hose lines. To connect, insert the plug into the socket and press the levers down. The levers fit snugly into the groove on the plug’s body and force the plug against the gasket to form a tight seal. To disconnect, lift both levers and pull out the plug. Couplings are compatible with Andrews, Dixon, Ever-Tite, and PT cam-and-groove couplings.
Aluminum fittings are lighter in weight than 316 stainless steel fittings. They have good corrosion resistance.
Note: To ensure a correct fit, make sure that the plug and socket have the same coupling size.
Warning: Relieve all pressure before disconnecting the couplings. Do not use cam-and-groove couplings with compressed air or gas.

- For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
- Specifications Met: Fed. Spec. A-A-59326
Plugs with male threaded end are also known as F adapters.
Plugs and sockets with continuous swivel are also known as live swivels. They rotate 360° before and after installation and can swivel continuously. Use them to prevent hose kinking.

- For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
- Maximum Pressure: 250 psi @ 72 ° F
- Temperature Range: -65° to 250° F
- Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
- Specifications Met: Fed. Spec. A-A-59326
Plugs with female threaded end are also known as A adapters.
Plugs and sockets with continuous swivel are also known as live swivels. They rotate 360° before and after installation and can swivel continuously. Use them to prevent hose kinking.

- For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
- Specifications Met: Fed. Spec. A-A-59326
Straight sockets with female threaded end are also known as D couplers.
Plugs and sockets with continuous swivel are also known as live swivels. They rotate 360° before and after installation and can swivel continuously. Use them to prevent hose kinking.
Sockets | Replacement Gaskets | Replacement Levers | Protective Plugs | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Coupling Size | Socket ID | Pipe Size | Dash Size | No. of Levers | Pull Ring Material | Max. Pressure | Each | Pkg. Qty. | Pkg. | Each | Each | ||||
Aluminum with Brass Levers | |||||||||||||||
1 1/2 | 2 1/8" | 1 1/2 | 24 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 000000000 | 0000000 | 10 | 0000000 | 00000 | 000000000 | 00000 | 000000 | 00 |
2 | 2 1/2" | 2 | 32 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 000000000 | 000000 | 10 | 0000000 | 0000 | 000000000 | 0000 | 0000000 | 000000 |
3 | 3 5/8" | 3 | 48 | 2 | Zinc-Plated Steel | 200 psi @ 72° F | 000000000 | 000000 | 10 | 0000000 | 00000 | 000000000 | 0000 | 0000000 | 00000 |

- For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Attachment Type: Use Band-and-Buckle Clamps
- Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
- Specifications Met: Fed. Spec. A-A-59326
Straight sockets with barbed end are also known as C couplers. Insert the barbed end into plastic or rubber hose and secure with a clamp.
Plugs and sockets with continuous swivel are also known as live swivels. They rotate 360° before and after installation and can swivel continuously. Use them to prevent hose kinking.
Sockets | Replacement Gaskets | Replacement Levers | Protective Plugs | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Coupling Size | Socket ID | For Hose ID | Dash Size | No. of Levers | Pull Ring Material | Max. Pressure | Each | Pkg. Qty. | Pkg. | Each | Each | ||||
Aluminum with Brass Levers | |||||||||||||||
1 1/2 | 2 1/8" | 1 1/2" | 24 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 000000000 | 0000000 | 10 | 0000000 | 00000 | 000000000 | 00000 | 000000 | 00 |
2 | 2 1/2" | 2" | 32 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 000000000 | 000000 | 10 | 0000000 | 0000 | 000000000 | 0000 | 0000000 | 000000 |
3 | 3 5/8" | 3" | 48 | 2 | Zinc-Plated Steel | 200 psi @ 72° F | 000000000 | 000000 | 10 | 0000000 | 00000 | 000000000 | 0000 | 0000000 | 00000 |
Plastic Barbed Hose Fittings for Water
Made of polypropylene, these fittings have good corrosion and abrasion resistance, and are lighter in weight than metal barbed hose fittings. Slide the barbed end into plastic or rubber hose and secure with a clamp.
Fittings with a threaded end are also known as hose nipples.

(Continuous Swivel),
Hose × Female Threaded Pipe
- Maximum Pressure: 200 psi @ 72° F
- Temperature Range: 35° to 190° F
- Attachment Type: Use Worm-Drive Clamps or Bolt Clamps
For Hose ID | Pipe Size | Fitting Seal Type | Color | Each | |
Polypropylene Plastic | |||||
---|---|---|---|---|---|
6mm | 3/4 | Washer | Black | 00000000 | 00000 |
8mm | 3/4 | Washer | Black | 00000000 | 0000 |
10mm | 3/4 | Washer | Black | 00000000 | 0000 |
12mm | 1/2 | Washer | Black | 00000000 | 0000 |
12mm | 3/4 | Washer | Black | 00000000 | 0000 |
12mm | 1 | Washer | Black | 00000000 | 0000 |
14mm | 3/4 | Washer | Black | 00000000 | 0000 |
14mm | 1 | Washer | Black | 00000000 | 0000 |
19mm | 3/4 | Washer | Black | 00000000 | 0000 |
19mm | 1 | Washer | Black | 00000000 | 0000 |
Threaded Swivels for Hose Nozzles
To prevent hose from twisting, kinking, and wearing prematurely, these swivels rotate before and after installation as needed. Connect them to the threaded end of your dispensing hose.
Anodized aluminum swivels have good corrosion resistance and are lighter in weight than chrome-plated brass swivels. Chrome-plated brass swivels have comparable corrosion resistance to anodized aluminum swivels, but are softer, so they’re easier to thread together. They have a bright, shiny appearance.
Swivels for diesel exhaust fluid (DEF) won’t pollute the fluid, which is prone to contamination. Made of anodized aluminum and stainless steel, they stand up to chemicals. Those with NPT threads require a thread sealant (sold separately) to create a leakproof connection and protect the fluid from impurities.
Straight swivels rotate at the female connection point only. They are also known as inline swivels.
45° offset swivels rotate at the male connection point and at the elbow. They are UL listed.

Pipe Size | Connection | Max. Pressure | Temperature Range, °F | Lg. | Each | |
For Use With Gasoline, Hydraulic Fluid, and Coolant | ||||||
---|---|---|---|---|---|---|
Anodized Aluminum | ||||||
1 1/4 × 1 1/4 | Threaded NPT Female × Threaded NPT Male | 150 psi @ 72° F | -65° to 250° | 4 1/2" | 0000000 | 0000000 |
1 1/2 × 1 1/2 | Threaded NPT Female × Threaded NPT Male | 150 psi @ 72° F | -65° to 250° | 5" | 0000000 | 000000 |
2 × 2 | Threaded NPT Female × Threaded NPT Male | 150 psi @ 72° F | -65° to 250° | 6 3/8" | 0000000 | 000000 |
Chrome-Plated Brass | ||||||
1 1/4 × 1 1/4 | Threaded NPT Female × Threaded NPT Male | 150 psi @ 72° F | -65° to 250° | 4 1/2" | 0000000 | 000000 |
1 1/2 × 1 1/2 | Threaded NPT Female × Threaded NPT Male | 150 psi @ 72° F | -65° to 250° | 5" | 0000000 | 000000 |
2 × 2 | Threaded NPT Female × Threaded NPT Male | 150 psi @ 72° F | -65° to 250° | 6 3/8" | 0000000 | 000000 |
For Use With Diesel Exhaust Fluid | ||||||
Anodized Aluminum and 303 Stainless Steel | ||||||
3/4 × 3/4 | Threaded NPT Female × Threaded NPT Male | 50 psi @ 72° F | -10° to 150° | 2" | 00000000 | 00000 |
3/4 × 3/4 | Threaded BSPP Female × Threaded BSPP Male | 50 psi @ 72° F | -10° to 150° | 2" | 00000000 | 00000 |

Pipe Size | Connection | Max. Pressure | Temperature Range, °F | Lg. | Gasket Material | Specifications Met | Each | |
For Use With Gasoline and Diesel Fuel | ||||||||
---|---|---|---|---|---|---|---|---|
Aluminum | ||||||||
3/4 × 3/4 | Threaded NPT Female × Threaded NPT Male | 50 psi @ 72° F | -20° to 120° | 4 1/8" | Buna-N Rubber | UL Listed | 0000000 | 000000 |
1 × 1 | Threaded NPT Female × Threaded NPT Male | 50 psi @ 72° F | -20° to 120° | 4 3/4" | Buna-N Rubber | UL Listed | 0000000 | 000000 |
Barbed Swivels for Hose Nozzles

Slide the barbed end of these swivels into your dispensing hose and connect with a clamp. They rotate before and after installation as needed to prevent hose from twisting, kinking, and wearing prematurely. They are also known as inline swivels. Swivels are anodized aluminum, which is lightweight with good corrosion resistance.
Anodized Aluminum | |||||||
---|---|---|---|---|---|---|---|
For Hose ID | Pipe Size | Connection | Max. Pressure | Temperature Range, °F | Lg. | Each | |
For Use With Gasoline, Hydraulic Fluid, and Coolant | |||||||
1" | 1 | Barbed Male × Threaded NPT Male | 150 psi @ 72° F | -65° to 250° | 2 13/16" | 0000000 | 000000 |
1 1/4" | 1 1/4 | Barbed Male × Threaded NPT Male | 150 psi @ 72° F | -65° to 250° | 3 7/8" | 0000000 | 000000 |
1 1/2" | 1 1/2 | Barbed Male × Threaded NPT Male | 150 psi @ 72° F | -65° to 250° | 4 1/8" | 0000000 | 000000 |
2" | 2 | Barbed Male × Threaded NPT Male | 150 psi @ 72° F | -65° to 250° | 4 11/16" | 0000000 | 000000 |
Swivels for Container-Mount Grease Dispenser Nozzles



Move grease-dispensing guns in any direction without kinking the outlet hose.
Type | Connection | Max. Grease Outlet Pressure, psi | Swivel Angle | Material | Each | |
90° Elbow | ||||||
---|---|---|---|---|---|---|
Connector | 1/8 NPT Male × 1/8 NPT Male | 7,500 | 360° | Steel | 0000000 | 0000000 |
Adapter | 1/8 NPT Male × 1/8 NPT Female | 7,500 | 360° | Steel | 0000000 | 000000 |
Reducing Adapter | 1/2"-27 UNS Male × 1/4 NPT Male | 5,000 | 360° | Steel | 0000000 | 000000 |
Straight | ||||||
Connector | 1/8 NPT Male × 1/8 NPT Male | 4,500 | 360° | Steel | 0000000 | 00000 |
Adapter | 1/8 NPT Male × 1/8 NPT Female | 4,500 | 360° | Steel | 0000000 | 00000 |
Reducing Adapter | 1/2"-27 UNS Male × 1/4 NPT Male | 7,500 | 360° | Steel | 0000000 | 00000 |
Z-Swivel | ||||||
Connector | 1/2 NPT Male × 1/2 NPT Male | 5,000 | 360° | Steel | 0000000 | 000000 |
Connector | 1/4 NPT Male × 1/4 NPT Male | 7,500 | 360° | Steel | 0000000 | 000000 |
Reducing Adapter | 1/2 NPT Male × 3/8 NPT Male | 5,000 | 360° | Steel | 0000000 | 000000 |
Reducing Adapter | 1/2"-27 UNS Male × 1/4 NPT Male | 7,500 | 360° | Steel | 0000000 | 000000 |