With built-in LEDs, these lights deliver all the brightness of larger dock lights in a low-profile design. A hinge stop keeps the arm from extending past the dock door, and the curved design fits around the track. Swing them out to light the inside of your trailer, then fold them flat against the door when not in use. Rated for damp locations, these lights handle humidity and moisture.

Plug them into a three-prong outlet—no hardwiring required. Turn them on and off with the switch near the hinge. Choose the 36” model if you need to mount these more than a foot from the door opening.

For technical drawings and 3-D models, click on a part number.

Compared to other dock lights that can only adjust vertically and horizontally, these lights bend at any angle to direct light exactly where it's needed. They have built-in LEDs that last longer, are more efficient, and generate less heat than other light technologies. These lights emit a neutral white light often found in workspaces.

For technical drawings and 3-D models, click on a part number.

Illuminate harsh, wet areas, even outside in extreme weather—these lights are often used on ship building ports. Rated NEMA 4X and UL marine listed, they’re sealed against heavy rain and washdowns, and they won’t corrode from salt water or cleaning chemicals. They’re also IP rated to stay sealed in dusty conditions. And with a durable glass lens, they’re rated IK08 for impact resistance. They’ll work in temperatures from -40° F to 145° F. Bright enough for environments that require high visibility, these lights have a cool appearance that highlights white and blue tones.

A quick-connect mount lets you wire these lights to an outlet box without having to hold them in place. First, wire the mount to your outlet box with a 3/4" conduit connector. Then twist the light into the mount to lock it in place.

These lights are DLC (DesignLight Consortium) listed, so they’ve been tested to confirm their energy efficiency. They’re also CE Marked to meet European safety standards.

For technical drawings and 3-D models, click on a part number.

These lights are UL listed for Class I, Division 2, Groups A, B, C, and D for environments where ignitable concentrations of acetylene, hydrogen, ethylene, and propane occur infrequently, such as in the case of an accidental spill or failure of a ventilation system. They can be hardwired to operate on any of the voltages listed. They require a metal halide bulb (sold separately). These floodlights cannot be sold to California due to local energy efficiency regulations.

These lights are UL listed or CSA certified for hazardous locations where flammable/combustible gases, vapors, and liquids may be present. They have a sealed lens and can be hardwired to operate on any of the voltages listed.

Styles 1-2 can be used where hazardous material occurs infrequently. They have built-in LEDs that last longer, are more efficient, and generate less heat than other light technologies. Style 1 are housed in durable stainless steel.

Style 3 withstand hazardous material under normal operating conditions. Housed in lightweight aluminum, they have built in LEDs that last longer, are more efficient, and generate less heat than other light technologies.

Lights with a cool appearance highlight white/blue tones that are good for inspecting.

All are IP66 rated for protection from washdowns. NEMA 4X rated lights protect their parts from corrosion.

Lights meet OSHA standards.

Flashers (sold separately) allow lights to be wired as continuous or flashing in any combination.

When motion is detected from both directions at a two-way corner, these lights flash to alert personnel and prevent collisions.

Use a remote sensor cable to mount the motion sensor up to 20 feet away from the unit for a more advanced warning.