Quickly align, join, or hold machine components in place in food, pharmaceutical, and other sanitary environments. Pulling the plunger knob and twisting it 90° will lock the nose into its retracted position.

Lock the nose into the retracted position by pulling the handle and rotating it 90°.

The ring allows you to attach these spring plungers to a lanyard.

Use the lanyard as a tether to secure the spring plunger to machinery and prevent accidental drops.

Install by hand or with a hex key in low-clearance applications.

A quarter turn of the handle locks these plungers in the retracted position. The T-handle is easy to grip.

A quarter turn of the handle locks these plungers in the retracted position. The smooth ball handle is easy to grip and won't catch on other parts.

An L-handle takes up less space than a T-handle.

Lock the nose into the retracted position by pulling the knob and rotating it 90°.

Lock the nose in the retracted position by pulling the knob and rotating it 90°.

Insert the nose into a panel; then thread on the nut and tighten using an installation wrench.

An O-ring in the flange creates a tight seal.

Designed with a flange to keep the plunger from being pushed through a hole when the ball is depressed.

Install with a driver.

Fasten from the nose end with a wrench for more torque than slotted long-nose spring plungers.

Install with a hex key for more torque than slotted long-nose spring plungers.

These washers have smaller outside diameters than standard spring lock washers to fit neatly under socket head cap screws.

The arched shape of these washers presses up against a bolt and down against a nut to prevent loosening from wear, vibration, or temperature changes.

As a screw is tightened, these washers flatten to add tension to the joint, counteracting fatigue around the joint from small amounts of vibration.

Choose these washers for their adherence to strict military standards for material and construction.

Also known as high-collar lock washers, these metric washers have smaller outside diameters than standard split lock washers to fit neatly under socket head cap screws.

Comparable to NORD-LOCK® or Sherex TEC Series washers, these two-piece washers provide more locking power than split, tooth, and spring lock washers. Wedges on the inside lock the two pieces together, and serrations on the exterior grip surfaces to resist loosening from high vibration and shifting.

Bend one tab against the side of the mounting surface and the other tab against the flats on a bolt or nut to prevent both the fastener and washer from turning and loosening in high-vibration applications, such as a motor mount.

Use these steel springs in noncorrosive environments.

Made of stainless steel, these springs are more corrosion resistant than steel extension springs.

For specialty applications and connections, these springs have unique end types.

Use these steel springs in noncorrosive environments.

Made of stainless steel, these springs are more corrosion resistant than steel extension springs.

These fabric-covered rubber springs stretch to up to three times their original length—much farther than traditional extension springs, tie downs, and shock cords.

Made of stainless steel, these springs are more corrosion resistant than steel springs.

Protect material and equipment underneath heavy loads—these gas springs lock automatically when fully extended, ensuring they can't be closed until it's safe to do so.

Automatically locking when fully extended and made of 316 stainless steel to resist corrosion, these gas springs protect material and equipment underneath heavy loads in damp environments.

Made from stainless steel for excellent corrosion resistance in damp environments.

A temperature-resistant seal allows these gas springs to withstand heat up to 392°F.

Mechanical operation means these springs have no seals to fail or gas to leak.

Made from stainless steel for excellent corrosion resistance in damp environments.

Pair one of these gas springs with a release control to stop and release the gas spring anywhere along the stroke with the push of a button or lever.

Made from stainless steel for excellent corrosion resistance in damp environments. These gas springs have a bleed valve so you can release gas to permanently reduce the force to meet your requirements.

Color coded by force to help you choose the correct replacement, these gas springs generate high force.

Pair these 30° angle brackets with ball socket end fittings to mount your gas spring in almost any position.

Pair these 90° angle brackets with ball socket end fittings to mount your gas spring in almost any position.

Made from stainless steel for excellent corrosion resistance in damp environments.

Made from stainless steel, these brackets resist corrosion in damp environments.

Since they’re at least twice as thick as standard ball stud mounting brackets, these brackets are best for high-force applications.

Stainless steel that’s twice as thick as standard 90° angle ball stud mounting brackets makes these brackets good for high-force applications exposed to damp conditions.

Pair with ball socket end fittings to mount your gas spring in almost any position.

Attach eyelet end fittings to these brackets to mount gas springs.

These brackets secure eyelet end fittings from both sides to provide a strong hold on gas springs that get bumped or jostled. Mount on any panel, lid, or door.

Made from stainless steel for excellent corrosion resistance in damp environments.

Install these ball studs into thin material—they’re riveted, so you only need access to one side.

Pull the chain-grip to unlatch hard-to-reach doors and panels.

Their spring-loaded design withstands vibration, rattling, and shaking better than other push-to-close grab latches for a more secure hold.

Each latch has top and bottom spring-loaded balls that can grab the strike plate from different directions.

Also known as bullet catches, these latches have a spring-loaded ball that grabs and holds the strike plate to keep doors shut.

There's no need for a mating strike plate for these latches—their spring-loaded arm snaps to engage when closing the door.

Their spring-loaded design withstands vibration, rattling, and shaking better than other face-mount push-to-close latches for a more secure hold.

Lift and turn the handle 180° to open and close this lock.

Lift and turn the handle 180° to open and close these latches. Add a padlock to secure.

Also known as rotary latches, these compensate for door misalignment when closing and then firmly grip the strike bolt for a secure hold.

These latches have a spring-wire cam that slips under a receiving catch on a cabinet body to create tension and hold cabinet doors and drawers closed.

Prevent accidental release and keep the tip from snagging.

Close storm doors more smoothly than standard spring closers.

Mounted diagonally so one end is higher than the other, the motion of an opening door tightens the torsion spring; as it unwinds, it closes the door.

The springs in these hinges swing doors and gates fully open after a light push on the door.

Also known as gravity hinges, the weight of the door returns these hinges to a closed position without the help of springs.

After a light push on the door, springs in these hinges swing doors and gates fully open.

Designed to wrap around the edge of the partition frame, these hinges provide a stronger hold than other toilet partition door hinges.

The hinge leaves fit in cutouts (mortises) on the edge of a door.