Electric Door Strike Plates for Door Handles and Knobs
All of these strike plates can be used with door handles and knobs. Use them all to regulate access to doors by holding or releasing a lock's latch with a signal from a push-button switch, keypad control, or card reader. Strike plates must be hardwired.
When replacing an electric strike plate, first select one that will work with your lock type so that the latch will align properly with the plate. Next, choose a strike plate that can accommodate your latch bolt projection (how far the latch bolt extends from the door's edge). Then, match the size of the strike plate to your door frame cutout. If you don't find an exact match, choose a strike plate with a smaller size than your cutout.
Rutherford and Von Duprin strike plates meet UL 1034 for burglary resistance.
For technical drawings and 3-D models, click on a part number.
For Cutout | Faceplate | Voltage | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Max. Latch Bolt Projection | Ht. | Wd. | Dp. | Ht. | Wd. | Holding Strength, lbs. | DC | For Door Frame Material | For Door Swing Direction | Mounting Hardware Included | Appearance | Choose a Finish | Each | |
Von Duprin 5100 | ||||||||||||||
| 1/2" | 3 3/8" | 1" | 1 3/8" | 4 7/8" | 1 1/4" | 1,000 | 12V/24V | Metal, Wood | Left, Right | Yes | Dull | 000000 | 0000000 | |
Pry-Resistant Crossbars
Able to withstand vandalism better than other crossbars, these mortise mount into a cutout in the door. Crossbars have a traditional design that is common in older installations. They open doors with a push and are often used on emergency exits. You can use them alone or mount an optional handle on the outside of the door. All can be cut to fit a range of door widths.
To determine door swing direction, stand on the side of the door where it swings away from you. If it opens to the right, select a right crossbar; if it opens to the left, select a left crossbar. Latch bolt projection is the length the latch bolt extends from the door's edge.
Bar | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Door Thick. | For Cutout Dp. | For Max. Door Wd. | Latch Bolt Projection | Overall Wd. | Dia. | Projection | Housing Material | Mounting Hardware Included | Appearance | Choose a Finish | Each | |
For Left Door Swing Direction | ||||||||||||
For Single Doors | ||||||||||||
Von Duprin 88 | ||||||||||||
| 1 3/4" | 4 1/2" | 36" | 3/4" | 32" | 1" | 4 7/8" | Brass | Yes | Dull | 0000000 | 000000000 | |
For Right Door Swing Direction | ||||||||||||
For Single Doors | ||||||||||||
Von Duprin 88 | ||||||||||||
| 1 3/4" | 4 1/2" | 36" | 3/4" | 32" | 1" | 4 7/8" | Brass | Yes | Dull | 0000000 | 00000000 | |
Chrome Plated | Dark Bronze | |||||||
|---|---|---|---|---|---|---|---|---|
| For Door Swing Direction | Keying | Material | Appearance | Number of Keys Included | Each | Each | ||
Key Locking Knob—Schlage C Keyway Style | ||||||||
| Left, Right | Keyed Differently | Brass | Dull | 2 | 00000000 | 0000000 | 00000000 | 0000000 |
Key Locking Lever—Schlage C Keyway Style | ||||||||
| Left | Keyed Differently | Brass | Dull | 2 | 00000000 | 000000 | 00000000 | 000000 |
| Right | Keyed Differently | Brass | Dull | 2 | 00000000 | 000000 | 00000000 | 000000 |
Key Locking Pull Handle with Thumb Piece—Schlage C Keyway Style | ||||||||
| Left, Right | Keyed Differently | Brass | Dull | 2 | 00000000 | 000000 | 00000000 | 000000 |
Nonlocking Pull Handle | ||||||||
| Left, Right | __ | Brass | Dull | __ | 00000000 | 000000 | 00000000 | 000000 |
Crossbars
This traditional design is common in older installations. Crossbars open doors with a push and are often used on emergency exits. You can use them alone or mount an optional handle on the outside of the door. All can be cut to fit a range of door widths.
Latch bolt projection is the length the latch bolt extends from the door's edge.
Crossbars for double doors have vertical rods that latch into strike plates mounted on the floor and ceiling.
Crossbars for single/double doors do not include vertical rods. When used on double doors, a center support (not included) is required.
Key-locking lever handles must be installed with a back plate (included) when used on wood doors.
Bar | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Door Thick. | For Max. Door Wd. | For Max. Door Ht., ft. | Latch Bolt Projection | Overall Wd. | Dia. | Projection | Housing Material | For Door Swing Direction | Specifications Met | Mounting Hardware Included | Appearance | Choose a Finish | Each | |
Von Duprin 88 | ||||||||||||||
| 1 3/4" | 36" | 7 | 5/8" | 32" | 1" | 4 7/8" | Brass | Left, Right | ANSI/BHMA A156.3 Grade 1, UL Listed | Yes | Dull | 0000000 | 000000000 | |
Bar | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Door Thick. | For Max. Door Wd. | Latch Bolt Projection | Overall Wd. | Dia. | Projection | Housing Material | For Door Swing Direction | Specifications Met | Mounting Hardware Included | Appearance | Choose a Finish | Each | |
Von Duprin 88 | |||||||||||||
| 1 3/4" | 36" | 3/4" | 32" | 1" | 4 7/8" | Brass | Left, Right | ANSI/BHMA A156.3 Grade 1, UL Listed | Yes | Dull | 0000000 | 000000000 | |
Chrome Plated | Dark Bronze | |||||||
|---|---|---|---|---|---|---|---|---|
| For Rod Type | For Door Swing Direction | Keying | Material | Appearance | Each | Each | ||
For Double/Single Doors | ||||||||
Key Locking Knob—Schlage C Keyway Style | ||||||||
| __ | Left, Right | Keyed Differently | Brass | Dull | 00000000 | 0000000 | 00000000 | 0000000 |
| Vertical | Left, Right | Keyed Differently | Brass | Dull | 00000000 | 000000 | 00000000 | 000000 |
Key Locking Lever—Schlage C Keyway Style | ||||||||
| __ | Left | Keyed Differently | Brass | Dull | 00000000 | 000000 | 000000 | 00 |
| __ | Right | Keyed Differently | Brass | Dull | 00000000 | 000000 | 000000 | 00 |
| Vertical | Left | Keyed Differently | Brass | Dull | 00000000 | 000000 | 000000 | 00 |
| Vertical | Right | Keyed Differently | Brass | Dull | 00000000 | 000000 | 000000 | 00 |
Key Locking Pull Handle with Thumb Piece—Schlage C Keyway Style | ||||||||
| __ | Left, Right | Keyed Differently | Brass | Dull | 00000000 | 000000 | 00000000 | 000000 |
| Vertical | Left, Right | Keyed Differently | Brass | Dull | 00000000 | 000000 | 00000000 | 000000 |
Nonlocking Pull Handle | ||||||||
| __ | Left, Right | __ | Brass | Dull | 00000000 | 000000 | 00000000 | 000000 |
| Vertical | Left, Right | __ | Brass | Dull | 000000 | 000000 | 000000 | 000000 |
Impact-Resistant Touch Bars
Rugged construction withstands impact from carts, dollies, and other equipment. Often used on emergency exits, these touch bars open doors with a push and have a hydraulic damper for quiet operation. You can use them alone or mount an optional handle on the outside of the door. All bars can be cut to fit a range of door widths.
Use the built-in retainer to hold touch bars in the unlatched position to allow traffic to pass freely through doorways. Latch bolt projection is the length the latch bolt extends from the door's edge.
Touch bars for double doors have vertical rods that latch into strike plates mounted on the floor and ceiling.
Touch bars for double/single doors do not include vertical rods. When used on double doors, a center support (not included) is required.
Door handles for single doors are UL Listed for use with three-hour fire doors.
| For Door Thick. | For Door Wd. | Latch Bolt Projection | Overall Wd. | Bar Projection | Housing Material | Bar Material | For Door Swing Direction | Mounting Hardware Included | Choose a Finish | Each | |
Von Duprin 99 | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 3/4"-2 1/4" | 28"-36" | 3/4" | 33" | 3 7/8" | Steel | Aluminum | Left, Right | Yes | 0000000 | 000000000 | |
| 1 3/4"-2 1/4" | 28"-36" | 3/4" | 33" | 3 7/8" | Steel | Aluminum | Left, Right | Yes | Dull Aluminum Coated | 0000000 | 00000000 |
| 1 3/4"-2 1/4" | 34"-48" | 3/4" | 45" | 3 7/8" | Steel | Aluminum | Left, Right | Yes | 0000000 | 00000000 | |
| 1 3/4"-2 1/4" | 34"-48" | 3/4" | 45" | 3 7/8" | Steel | Aluminum | Left, Right | Yes | Dull Aluminum Coated | 0000000 | 00000000 |
| For Door Thick. | For Door Wd. | For Max. Door Ht., ft. | Latch Bolt Projection | Overall Wd. | Bar Projection | Housing Material | Bar Material | For Door Swing Direction | Mounting Hardware Included | Choose a Finish | Each | |
Von Duprin 99 | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 3/4"-2 1/4" | 28"-36" | 7 | 5/8" | 33" | 3 7/8" | Steel | Aluminum | Left, Right | Yes | 0000000 | 000000000 | |
| 1 3/4"-2 1/4" | 28"-36" | 7 | 5/8" | 33" | 3 7/8" | Steel | Aluminum | Left, Right | Yes | Dull Aluminum Coated | 0000000 | 00000000 |
| 1 3/4"-2 1/4" | 34"-48" | 7 | 5/8" | 45" | 3 7/8" | Steel | Aluminum | Left, Right | Yes | 0000000 | 00000000 | |
| 1 3/4"-2 1/4" | 34"-48" | 7 | 5/8" | 45" | 3 7/8" | Steel | Aluminum | Left, Right | Yes | Dull Aluminum Coated | 0000000 | 00000000 |
Handle with
Thumb Piece
| Door Handle Type | Keying | Material | For Door Swing Direction | Number of Keys Included | Finish | Each | |
For Double/Single Doors | |||||||
|---|---|---|---|---|---|---|---|
Von Duprin 99 | |||||||
| Nonlocking Pull Handle | __ | Brass | Left, Right | __ | __ | 0000000 | 0000000 |
Von Duprin 99—Schlage C Keyway Style | |||||||
| Key Locking Pull Handle | Keyed Differently | Brass | Left, Right | 2 | __ | 0000000 | 000000 |
| Key Locking Pull Handle with Thumb Piece | Keyed Differently | Brass | Left, Right | 2 | __ | 0000000 | 000000 |
| Key Locking Lever | Keyed Differently | Brass | Left, Right | 2 | __ | 0000000 | 000000 |
For Single Doors | |||||||
Kaba Simplex 5000 | |||||||
| Self Locking with Combination and Key Lever | __ | Brass | Left, Right | __ | Dull Chrome Plated | 0000000 | 000000 |
Kaba Simplex LP1000 | |||||||
| Self Locking with Combination and Key Lever | Without Lock Cylinder | Brass | Left | __ | Dull Chrome Plated | 0000000 | 000000 |
| Self Locking with Combination and Key Lever | Without Lock Cylinder | Brass | Right | __ | Dull Chrome Plated | 0000000 | 000000 |
Touch Bars
Often used on emergency exits, touch bars open doors with a push. You can use them alone or mount an optional handle on the outside of the door. All bars can be cut to fit a range of door widths.
Use the built-in retainer to hold touch bars in the unlatched position to allow traffic to pass freely through doorways. Latch bolt projection is the length the latch bolt extends from the door's edge.
Touch bars for double doors have vertical rods that latch into strike plates mounted on the floor and ceiling.
Touch bars for double/single doors do not include vertical rods. When used on double doors, a center support (not included) is required.
Door handles for single doors are UL Listed for use with three-hour fire doors.
| For Door Thick. | For Door Wd. | For Max. Door Ht., ft. | Latch Bolt Projection | Overall Wd. | Bar Projection | Housing Material | Bar Material | For Door Swing Direction | Choose a Finish | Each | |
Von Duprin 22 | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 3/4"-2 1/4" | 27"-36" | 7 | 5/8" | 33 1/8" | 3 7/8" | Steel | Steel | Left, Right | 00000000 | 0000000 | |
| 1 3/4"-2 1/4" | 33"-48" | 7 | 5/8" | 45 1/8" | 3 7/8" | Steel | Steel | Left, Right | 0000000 | 000000 | |
Handle with
Thumb Piece
| Door Handle Type | Keying | Material | For Door Swing Direction | Number of Keys Included | Finish | Each | |
For Double/Single Doors | |||||||
|---|---|---|---|---|---|---|---|
Von Duprin 22 | |||||||
| Nonlocking Pull Handle | __ | Steel | Left, Right | __ | __ | 0000000 | 0000000 |
Von Duprin 22—Schlage C Keyway Style | |||||||
| Key Locking Knob | Keyed Differently | Steel | Left, Right | 2 | __ | 00000000 | 000000 |
| Key Locking Lever | Keyed Differently | Steel | Left, Right | 2 | __ | 0000000 | 000000 |
| Key Locking Pull Handle | Keyed Differently | Steel | Left, Right | 2 | __ | 0000000 | 000000 |
| Key Locking Pull Handle with Thumb Piece | Keyed Differently | Steel | Left, Right | 2 | __ | 0000000 | 000000 |
For Single Doors | |||||||
Kaba Simplex LP1000 | |||||||
| Self Locking with Combination and Key Lever | Without Lock Cylinder | Brass | Left | __ | Dull Chrome Plated | 0000000 | 000000 |
| Self Locking with Combination and Key Lever | Without Lock Cylinder | Brass | Right | __ | Dull Chrome Plated | 0000000 | 000000 |
Fire-Rated Touch Bars
This touch bar is UL Listed for use with three-hour fire doors. Often used on emergency exits, it opens doors with a push and has a hydraulic damper for quiet operation. You can use it alone or mount an optional handle on the outside of the door. Handles are also UL Listed for use with three-hour fire doors. Touch bar can be cut to fit a range of door widths.
Latch bolt projection is the length the latch bolt extends from the door's edge.
| For Door Thick. | For Door Wd. | Latch Bolt Projection | Overall Wd. | Bar Projection | Housing Material | Bar Material | Finish | For Door Swing Direction | Mounting Hardware Included | Each | |
For Double/Single Doors | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Von Duprin 99 | |||||||||||
| 1 3/4"-2 1/4" | 28"-36" | 3/4" | 33" | 3 7/8" | Steel | Aluminum | Dull Chrome Plated | Left, Right | Yes | 0000000 | 000000000 |
| Door Handle Type | Keying | Material | Finish | For Door Swing Direction | Each | |
Kaba Simplex 5000 | ||||||
|---|---|---|---|---|---|---|
| Self Locking with Combination and Key Lever | __ | Brass | Dull Chrome Plated | Left, Right | 0000000 | 0000000 |
Kaba Simplex LP1000 | ||||||
| Self Locking with Combination and Key Lever | Without Lock Cylinder | Brass | Dull Chrome Plated | Left | 0000000 | 000000 |
| Self Locking with Combination and Key Lever | Without Lock Cylinder | Brass | Dull Chrome Plated | Right | 0000000 | 000000 |