Filter by
Product Family
For Use With
Maximum Pressure
Priming Type
Flow Rate @ Pressure
Duty Cycle
Pump Style
Maximum Feet of Head
Power
Wetted Parts Material
DFARS Specialty Metals
Export Control Classification Number (ECCN)
Any-Direction Constant-Flow-Rate Diaphragm Pumps for Water
 |  |
Style A | Style B |
Mount these diaphragm pumps in any position, even upside down. Pumps have a fractional horsepower motor rated for intermittent use (return to room temperature before restarting). They are for use in low-flow spraying, draining, and washdown applications. They are self-priming, which means they create a suction force to draw liquid upward. Pumps can run dry and do not require an initial fill, so they’re a good choice for applications without a constant flow of liquid. Do not use with solids.
Pressure Switch—Pumps with a pressure switch automatically shut off the pump at the maximum pressure.
Battery Powered—Battery-operated pumps operate on a 12-volt battery. They are commonly used with agricultural sprayers and washers.
Intake | Discharge | Overall | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | Max. Flow Rate, gpm | Flow Rate @ Pressure | Max. ft. of Head, ft. | Max. Pressure, psi | Max. Temp., ° F | Current, amp | Pipe Size | Thread Type | Gender | Pipe Size | Thread Type | Gender | Max. Self-Priming Ht., ft. | Lg. | Wd. | Ht. | Power Source | Each | |||
120V AC, Single Phase—With Thermal Overload Protection and With Pressure Switch | |||||||||||||||||||||
Hardwire | |||||||||||||||||||||
| A | 1.5 | 1.24 gpm @ 20 psi 1.04 gpm @ 60 psi | 346 | 150 | 170 | 1 | 3/8 | NPT | Female | 3/8 | NPT | Female | 8 | 9 3/8" | 3 3/8" | 4 1/8" | Electric | 8080K42 | 0000000 | ||
Plug In | |||||||||||||||||||||
| A | 1.4 | 1.15 gpm @ 20 psi 0.84 gpm @ 60 psi | 138 | 60 | 130 | 0.57 | 3/8 | NPT | Female | 3/8 | NPT | Female | 8 | 7 5/8" | 3 3/8" | 4 1/4" | Electric | 8080K31 | 000000 | ||
| A | 1.6 | 1.32 gpm @ 20 psi 1.07 gpm @ 60 psi | 231 | 100 | 170 | 0.95 | 3/8 | NPT | Female | 3/8 | NPT | Female | 8 | 8 5/8" | 3 3/8" | 4" | Electric | 8080K14 | 000000 | ||
| A | 1.7 | 1.52 gpm @ 20 psi 0.03 gpm @ 60 psi | 138 | 60 | 170 | 0.61 | 3/8 | NPT | Female | 3/8 | NPT | Female | 8 | 8 5/8" | 3 3/8" | 4" | Electric | 8080K13 | 000000 | ||
| A | 3 | 2.20 gpm @ 20 psi | 104 | 45 | 120 | 0.7 | 1/2 | NPSM | Male | 1/2 | NPSM | Male | 8 | 8 3/4" | 5" | 4 1/2" | Electric | 8080K39 | 000000 | ||
120V AC, Single Phase—With Thermal Overload Protection | |||||||||||||||||||||
Plug In | |||||||||||||||||||||
| A | 3.4 | 2.30 gpm @ 20 psi | 92 | 40 | 120 | 1 | 1/2 | NPSM | Male | 1/2 | NPSM | Male | 8 | 7 5/8" | 5" | 4 3/8" | Electric | 8080K19 | 000000 | ||
12V DC—With Thermal Overload Protection and With Pressure Switch | |||||||||||||||||||||
Hardwire | |||||||||||||||||||||
| B | 5.3 | 4.30 gpm @ 20 psi 3.40 gpm @ 60 psi | 120 | 60 | 140 | 17 | 1/2 | NPSM | Male | 1/2 | NPSM | Male | 8 | 10" | 4 15/16" | 4" | Battery | 3006N11 | 000000 | ||
12V DC—Without Thermal Overload Protection and With Pressure Switch | |||||||||||||||||||||
Hardwire | |||||||||||||||||||||
| A | 1.8 | 1.45 gpm @ 20 psi 1.22 gpm @ 60 psi | 231 | 100 | 170 | 8.7 | 3/8 | NPT | Female | 3/8 | NPT | Female | 10 | 8 3/8" | 4" | 4 1/8" | Battery | 1011N13 | 000000 | ||
| A | 1.8 | 1.57 gpm @ 20 psi 1.23 gpm @ 60 psi | 138 | 60 | 170 | 7.2 | 3/8 | NPT | Female | 3/8 | NPT | Female | 12 | 8 3/8" | 4" | 4 1/8" | Battery | 1011N12 | 000000 | ||
| A | 3 | 2.69 gpm @ 20 psi | 115 | 50 | 170 | 8 | 1/2 | NPSM | Male | 1/2 | NPSM | Male | 8 | 8 5/8" | 5" | 4 1/2" | Battery | 1011N14 | 000000 | ||
| A | 3.5 | 2.56 gpm @ 20 psi | 115 | 50 | 130 | 9.9 | 1/2 | NPSM | Male | 1/2 | NPSM | Male | 9 | 8 5/8" | 5" | 4 1/2" | Battery | 1011N16 | 000000 | ||
Remote-Adjustment High-Pressure Peristaltic Pumps for Chemicals
 |
Automatically control output from a distance using a variety of analog and digital signals, including 4-20mA and external pulse signals. Pumps can also be controlled manually, run on a schedule, or set to cycle on and off. View flow rate on the LED display. These pumps handle pressures four times higher than standard pumps. They meter a consistent amount of liquid within ±1% of the maximum flow. Often used in boiler feed systems and water treatment, they're compatible with chemicals such as cleaning fluids and acid-washing solutions. Pumps are self-priming and create suction to draw liquid upward. They can run dry.
Overall | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Flow Rate, gal/day | Max. Pressure, psi | Max. Viscosity, cP | Temp. Range, ° F | Power | Current, amp | Intake Connection | Discharge Connection | Lg. | Wd. | Ht. | Includes | Each | |||
120V AC, Single Phase with With Thermal Overload Protection | |||||||||||||||
Plug In | |||||||||||||||
| 1.3 to 125 | 100 | 1,500 | 32 to 100 | Not Rated | 0.6 | Compression | Compression | 11" | 8 3/4" | 8 1/8" | 20 ft. of 3/8" OD Tubing | 2886N205 | 000000000 | ||
Harsh-Environment Compact Constant-Flow-Rate Gear Pumps for Water and Oil
 |
An aluminum enclosure around the motor provides protection in dusty and dirty environments. Designed to fit into small equipment, these pumps have miniature gears and a fractional horsepower motor for low-flow applications. Pumps are gravity fed and require an elevated liquid source to fully fill the pump before turning on. Do not run dry or use with solids.
Note: If flow control is needed, place valves or reducers on the discharge side; never restrict the inlet of a pump with a valve or reducer.
Intake (NPT) | Discharge (NPT) | Overall | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Max. Flow Rate | Max. ft. of Head, ft. | Max. Pressure, psi | Max. Viscosity, cP | Temp. Range, ° F | Power | Current | Connection | Gender | For Tube ID | Connection | Gender | For Tube ID | Lg. | Wd. | Ht. | Each | |||
12V DC—Without Thermal Overload Protection | |||||||||||||||||||
Hardwire | |||||||||||||||||||
| 0.61 gpm (78 fl oz/min) | 46 | 20 | 800 | 10 to 180 | Fractional | 2.2 amp | Barbed | Male | 3/16" | Barbed | Male | 3/16" | 4" | 1 3/4" | 2 1/2" | 8220K43 | 000000 | ||
24V DC—Without Thermal Overload Protection | |||||||||||||||||||
Hardwire | |||||||||||||||||||
| 0.61 gpm (78 fl oz/min) | 46 | 20 | 800 | 10 to 180 | Fractional | 1.4 amp | Barbed | Male | 3/16" | Barbed | Male | 3/16" | 4" | 1 3/4" | 2 1/2" | 8220K44 | 00000 | ||
High-Pressure Constant-Flow-Rate Rotary Vane Pumps
 |
Commonly called rotary vane pumps, these are designed to pump water at high pressures in low-flow applications. Motor is open dripproof (ODP) for use in clean, dry, and well-ventilated environments. They have a built-in bypass relief valve to prevent pressure buildup. Pumps are gravity fed and require an elevated liquid source to fully fill the pump before turning on. Do not run dry or use with solids.
Note: If flow control is needed, place valves or reducers on the discharge side; never restrict the inlet of a pump with a valve or reducer.
Intake | Discharge | Overall | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Max. Flow Rate, gpm | Max. ft. of Head, ft. | Max. Pressure, psi | Max. Viscosity | Temp. Range, ° F | Power, hp | Current | Pipe Size | Thread Type | Gender | Pipe Size | Thread Type | Gender | Lg. | Wd. | Ht. | Each | |||
120V AC, Single Phase—With Thermal Overload Protection | |||||||||||||||||||
Hardwire | |||||||||||||||||||
| 0.8 | 554 | 240 | Not Rated | 30 to 195 | 1/4 | 5 A | 3/8 | NPT | Female | 3/8 | NPT | Female | 12" | 6" | 6" | 82395K81 | 0000000 | ||
120/240V AC, Single Phase—With Thermal Overload Protection | |||||||||||||||||||
Hardwire | |||||||||||||||||||
| 1.8 | 554 | 240 | Not Rated | 30 to 195 | 1/3 | 5.6/2.8 A | 3/8 | NPT | Female | 3/8 | NPT | Female | 12" | 6" | 6" | 82395K82 | 000000 | ||
| 2.3 | 554 | 240 | Not Rated | 30 to 195 | 1/2 | 7.2/3.6 A | 3/8 | NPT | Female | 3/8 | NPT | Female | 12" | 6" | 6" | 82395K83 | 000000 | ||
Compact Constant-Flow-Rate Gear Pumps for Water and Oil
 |
Designed to fit into small equipment, these pumps have miniature gears and a fractional horsepower motor for low-flow applications. Pumps are gravity fed and require an elevated liquid source to fully fill the pump before turning on. Do not run dry or use with solids.
Note: If flow control is needed, place valves or reducers on the discharge side; never restrict the inlet of a pump with a valve or reducer
Intake (NPT) | Discharge (NPT) | Overall | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Max. Flow Rate | Max. ft. of Head, ft. | Max. Pressure, psi | Max. Viscosity, cP | Temp. Range, ° F | Power | Current | Connection | Gender | For Tube ID | Connection | Gender | For Tube ID | Lg. | Wd. | Ht. | Each | |||
120V AC, Single Phase—With Thermal Overload Protection | |||||||||||||||||||
Hardwire | |||||||||||||||||||
| 0.43 gpm (55 fl oz/min) | 28 | 20 | 800 | 10 to 180 | Fractional | 1.5 amp | Barbed | Male | 3/16" | Barbed | Male | 3/16" | 4 3/8" | 3" | 3 3/4" | 8220K41 | 0000000 | ||
240V AC, Single Phase—With Thermal Overload Protection | |||||||||||||||||||
Hardwire | |||||||||||||||||||
| 0.43 gpm (55 fl oz/min) | 28 | 20 | 800 | 10 to 180 | Fractional | 1.5 amp | Barbed | Male | 3/16" | Barbed | Male | 3/16" | 4 3/8" | 3" | 3 3/4" | 8220K42 | 000000 | ||
Submersible Pumps for Water
 |  |  |
Style A | Style B | Style C |
 |  | |
Style D | Style E |
Style A
|
Max. Flow Rate, gpm | Discharge | Overall | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
@ 1 Ft. of Head | @ 5 Ft. of Head | @ 10 Ft. of Head | Max. ft. of Head, ft. | Temp. Range, ° F | Power, hp | Current, amp | Intake Inlet Type | Pipe Size | Thread Type | Gender | Cord Lg., ft. | Ht. | Wd. | Dp. | Each | |||
120V AC, Single Phase—With Thermal Overload Protection | ||||||||||||||||||
Plug In | ||||||||||||||||||
| 2.8 | 1.7 | — | 7 | 35 to 120 | 1/125 | 0.6 | Screened | 1/4 | NPT | Male | 6 | 3 5/8" | 2 7/8" | 3 1/2" | 4182K22 | 0000000 | ||
| 5 | 4 | 2.2 | 12.2 | 35 to 120 | 1/40 | 0.8 | Screened | 1/4 | NPT | Male | 6 | 4 1/4" | 2 7/8" | 4 7/8" | 4182K36 | 000000 | ||
Style B
|
Max. Flow Rate, gpm | Discharge | Overall | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
@ 1 Ft. of Head | @ 5 Ft. of Head | @ 10 Ft. of Head | Max. ft. of Head, ft. | Temp. Range, ° F | Power, hp | Current, amp | Intake Inlet Type | Pipe Size | Thread Type | Gender | Cord Lg., ft. | Ht. | Wd. | Dp. | Each | |||
115V AC, Single Phase—With Thermal Overload Protection | ||||||||||||||||||
Plug In | ||||||||||||||||||
| 5.6 | 4.3 | 0.8 | 11.1 | 35 to 85 | 1/15 | 0.8 | Screened | 1/4 | NPT | Male | 6 | 4" | 3 7/8" | 5 3/8" | 3163K33 | 000000 | ||
| 8.9 | 6.9 | 2.5 | 13 | 35 to 85 | 1/10 | 1.2 | Screened | 1/2 | NPT | Male | 6 | 4 1/2" | 4" | 5 5/8" | 3163K34 | 00000 | ||
115V AC, Single Phase—Without Thermal Overload Protection | ||||||||||||||||||
Plug In | ||||||||||||||||||
| 3.5 | 1.5 | — | 7.1 | 35 to 85 | 1/25 | 0.5 | Screened | 1/4 | NPT | Male | 6 | 3 7/8" | 3 1/2" | 4 5/8" | 3163K32 | 00000 | ||
Style C
|
Hardwire—Hardwire pumps must be wired to a plug (not included).
Max. Flow Rate, gpm | Discharge | Overall | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
@ 1 Ft. of Head | @ 5 Ft. of Head | @ 10 Ft. of Head | Max. ft. of Head, ft. | Temp. Range, ° F | Power, hp | Current, amp | Intake Inlet Type | Pipe Size | Thread Type | Gender | Cord Lg., ft. | Ht. | Wd. | Dp. | Each | |||
120V AC, Single Phase—With Thermal Overload Protection | ||||||||||||||||||
Plug In | ||||||||||||||||||
| 3.5 | 2.5 | — | 10.2 | 35 to 120 | 1/150 | 1.1 | Screened | 1/4 | NPT | Male | 6 | 4 5/8" | 4 1/8" | 4 1/8" | 9988K76 | 0000000 | ||
| 5.4 | 4.5 | 2.2 | 12.3 | 35 to 120 | 1/40 | 1.7 | Screened | 1/4 | NPT | Male | 6 | 4 5/8" | 5" | 5" | 9988K86 | 000000 | ||
| 5.4 | 4.5 | 2.2 | 12.3 | 35 to 120 | 1/40 | 1.7 | Screened | 1/4 | NPT | Male | 18 | 4 5/8" | 5" | 5" | 9988K89 | 000000 | ||
240V AC, Single Phase—With Thermal Overload Protection | ||||||||||||||||||
Hardwire | ||||||||||||||||||
| 5.4 | 4.5 | 2.2 | 12.3 | 35 to 120 | 1/40 | 0.7 | Screened | 1/4 | NPT | Male | 12 | 4 5/8" | 5" | 5" | 9988K96 | 000000 | ||
Style D
|
Max. Flow Rate, gpm | Discharge | Overall | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
@ 1 Ft. of Head | @ 5 Ft. of Head | @ 10 Ft. of Head | Max. ft. of Head, ft. | Temp. Range, ° F | Power, hp | Current, amp | Intake Inlet Type | Pipe Size | Thread Type | Gender | Cord Lg., ft. | Ht. | Wd. | Dp. | Each | |||
120V AC, Single Phase—With Thermal Overload Protection | ||||||||||||||||||
Plug In | ||||||||||||||||||
| 7.9 | 6.6 | 3.4 | 13.4 | 35 to 120 | 1/28 | 1.4 | Screened | 3/8 | NPT | Male | 6 | 4" | 4" | 4 5/8" | 4182K37 | 0000000 | ||
Style E
|
Max. Flow Rate, gpm | Discharge | Overall | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
@ 1 Ft. of Head | @ 5 Ft. of Head | @ 10 Ft. of Head | Max. ft. of Head, ft. | Temp. Range, ° F | Power, hp | Current, amp | Intake Inlet Type | For Tube ID | Gender | Cord Lg., ft. | Ht. | Wd. | Dp. | Each | |||
115V AC, Single Phase—With Thermal Overload Protection | |||||||||||||||||
Plug In | |||||||||||||||||
| 19.1 | 12.9 | 3.3 | 12.4 | 40 to 140 | 1/5 | 1.4 | Screened | 1" | Male | 15 | 4 1/2" | 4 3/8" | 5 3/4" | 3163K312 | 0000000 | ||
Miniature Oil-Free DC Electric Air Compressor/Vacuum Pumps
Barbed Male Inlet and Outlet
 |
Overall | For Tube ID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Max. Pressure, psi | Max. Flow Rate @ Pressure | Vacuum Rating, in. Hg | Full Load Current, mA | Volume (Sound), dBA | Lg. | Wd. | Ht. | Inlet | Outlet | Lubricant Req. | Wire Connection | Each | |||
12V DC | |||||||||||||||
| 3 | 0.019 ft³/min @ 3 psi 0.042 ft³/min @ 0 psi | 12 | 40 | 45 | 1 3/4" | 15/16" | 1 5/16" | 0.14" | 0.14" | No | Wire Leads | 4404K14 | 0000000 | ||
| 10 | 0.064 ft³/min @ 10 psi 0.117 ft³/min @ 0 psi | 22 | 442 | 45 | 3 1/16" | 1 3/16" | 2 3/16" | 0.16" | 0.16" | No | Spade Terminal | 4404K25 | 000000 | ||
3.5V DC to 7V DC | |||||||||||||||
| 2 | 0.008 ft³/min @ 2 psi 0.013 ft³/min @ 0 psi | 12 | 32 to 37 | 45 | 1 5/8" | 11/16" | 1" | 0.12" | 0.12" | No | Wire Leads | 4404K12 | 000000 | ||
NPT Female Inlet and Outlet
|
Overall | Pipe Size | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Max. Pressure, psi | Max. Flow Rate @ Pressure | Vacuum Rating, in. Hg | Full Load Current, amp | Volume (Sound), dBA | Lg. | Wd. | Ht. | Inlet | Outlet | Lubricant Req. | Wire Connection | Each | |||
12V DC | |||||||||||||||
| 12 | 0.148 ft³/min @ 12 psi 0.254 ft³/min @ 0 psi | 25 | 2.3 | 52 | 4 7/8" | 1 7/8" | 3 1/16" | 1/8 | 1/8 | No | Wire Leads | 4404K29 | 0000000 | ||
Long-Life Submersible Pumps for Water
 |
Magnets turn the impeller so there's no shaft seal to wear out. Submerge these pumps to circulate water in small tanks, cooling baths, fountains, and other low-flow applications. Plug in to activate. Do not run dry.
Max. Flow Rate, gpm | Discharge | Overall | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
@ 0 Ft. of Head | @ 1 Ft. of Head | @ 3 Ft. of Head | Max. ft. of Head, ft. | Removes Water Down To | Temp. Range, ° F | Power, hp | Current, amp | Intake Inlet Type | Pipe Size | Thread Type | Gender | Cord Lg., ft. | Ht. | Wd. | Dp. | Certification | Each | |||
120V AC, Single Phase—Without Thermal Overload Protection | ||||||||||||||||||||
Plug In | ||||||||||||||||||||
| 3 | 2.6 | 1.8 | 4.6 | 3" | 35 to 160 | 1/200 | 0.5 | Screened | 1/4 | NPT | Male | 6 | 3 1/4" | 3 3/4" | 3 7/8" | UL Recognized Component | 9971K41 | 0000000 | ||
Impact-Resistant Submersible/Open-Air Pumps for Water
 |  |
Style A | Style B |
Style A
|
Max. Flow Rate, gpm | Intake | Discharge | Overall | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
@ 1 Ft. of Head | @ 5 Ft. of Head | Max. ft. of Head, ft. | Temp. Range, ° F | Power, hp | Current, amp | Pipe Size | Thread Type | Gender | Pipe Size | Thread Type | Gender | Cord Lg., ft. | Ht. | Wd. | Dp. | Each | |||
120V AC, Single Phase—With Thermal Overload Protection | |||||||||||||||||||
Plug In | |||||||||||||||||||
| 3.4 | 2 | 7.4 | 35 to 120 | 1/150 | 1.1 | 1/4 × 1/2 | NPT × NPT | Female × Male | 1/4 | NPT | Male | 6 | 4 1/8" | 4 1/8" | 4 5/8" | 4182K26 | 0000000 | ||
Style B
|
Hardwire—Hardwire pumps must be wired to a plug (not included).
Max. Flow Rate, gpm | Intake | Discharge | Overall | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
@ 1 Ft. of Head | @ 5 Ft. of Head | @ 10 Ft. of Head | Max. ft. of Head, ft. | Temp. Range, ° F | Power, hp | Current, amp | Pipe Size | Thread Type | Gender | Pipe Size | Thread Type | Gender | Cord Lg., ft. | Ht. | Wd. | Dp. | Features | Each | |||
120V AC, Single Phase—With Thermal Overload Protection | |||||||||||||||||||||
Plug In | |||||||||||||||||||||
| 5 | 3.4 | 1.2 | 11.8 | 35 to 120 | 1/40 | 1.7 | 3/8 | NPT | Female | 1/4 | NPT | Male | 6 | 4 3/4" | 3 1/2" | 5 1/2" | Removable Intake Screen | 4182K3 | 0000000 | ||
| 8.3 | 5.6 | 3.5 | 17.3 | 35 to 120 | 1/15 | 3.2 | 1/2 | NPT | Female | 1/2 | NPT | Male | 6 | 5 1/2" | 4 1/2" | 7" | Removable Intake Screen | 4182K4 | 000000 | ||
240V AC, Single Phase—With Thermal Overload Protection | |||||||||||||||||||||
Hardwire | |||||||||||||||||||||
| 5 | 3.4 | 1.2 | 11.8 | 35 to 120 | 1/40 | 0.7 | 3/8 | NPT | Female | 1/4 | NPT | Male | 12 | 4 3/4" | 3 1/2" | 5 1/2" | Removable Intake Screen | 4182K73 | 000000 | ||
| 10 | 8.6 | 6.9 | 21 | 35 to 120 | 1/15 | 1.4 | 1/2 | NPT | Female | 1/2 | NPT | Male | 12 | 5 1/2" | 4 1/2" | 7" | Removable Intake Screen | 4182K17 | 000000 | ||
Impact-Resistant Submersible Pumps for Water
 | |
Style A | Style B |
Style A
|
Hardwire—Hardwire pumps must be wired to a plug (not included).
Max. Flow Rate, gpm | Discharge | Overall | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
@ 1 Ft. of Head | @ 5 Ft. of Head | Max. ft. of Head, ft. | Temp. Range, ° F | Power, hp | Current, amp | Intake Inlet Type | Pipe Size | Thread Type | Gender | Cord Lg., ft. | Ht. | Wd. | Dp. | Each | |||
120V AC, Single Phase—With Thermal Overload Protection | |||||||||||||||||
Plug In | |||||||||||||||||
| 2.8 | 1.7 | 7 | 35 to 120 | 1/200 | 1.1 | Screened | 1/4 | NPT | Male | 6 | 4 1/4" | 4 1/8" | 4 1/8" | 4182K24 | 0000000 | ||
240V AC, Single Phase—With Thermal Overload Protection | |||||||||||||||||
Hardwire | |||||||||||||||||
| 3.4 | 2 | 7.4 | 35 to 120 | 1/150 | 0.4 | Screened | 1/4 | NPT | Male | 12 | 4 1/4" | 4 1/8" | 4 1/8" | 4182K72 | 000000 | ||
Style B
|
Hardwire—Hardwire pumps must be wired to a plug (not included).
Max. Flow Rate, gpm | Discharge | Overall | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
@ 1 Ft. of Head | @ 5 Ft. of Head | @ 10 Ft. of Head | Max. ft. of Head, ft. | Temp. Range, ° F | Power, hp | Current, amp | Intake Inlet Type | Pipe Size | Thread Type | Gender | Cord Lg., ft. | Ht. | Wd. | Dp. | Each | |||
120V AC, Single Phase—With Thermal Overload Protection | ||||||||||||||||||
Plug In | ||||||||||||||||||
| 5 | 3.4 | 1.2 | 11.8 | 35 to 120 | 1/40 | 1.7 | Screened | 1/4 | NPT | Male | 6 | 4 3/4" | 3 1/2" | 5 1/2" | 4182K2 | 0000000 | ||
| 13.5 | 12.4 | 10.2 | 24.5 | 35 to 120 | 1/12 | 3.5 | Screened | 1/2 | NPT | Male | 6 | 5 1/2" | 4 1/2" | 7" | 4182K5 | 000000 | ||
240V AC, Single Phase—With Thermal Overload Protection | ||||||||||||||||||
Hardwire | ||||||||||||||||||
| 13.5 | 12.4 | 10.2 | 24.5 | 35 to 120 | 1/12 | 1.6 | Screened | 1/2 | NPT | Male | 12 | 5 1/2" | 4 1/2" | 7" | 4182K74 | 000000 | ||
Long-Life Submersible/Open-Air Pumps for Water
Tube
 |
Max. Flow Rate, gpm | Intake | Discharge | Overall | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Electrical Connection Type | @ 0 Ft. of Head | @ 1 Ft. of Head | @ 3 Ft. of Head | Max. ft. of Head, ft. | Removes Water Down To | Temp. Range, ° F | Power, hp | Current, amp | Connection | For Tube ID | Gender | Connection | For Tube ID | Gender | Ht. | Wd. | Dp. | Each | |||
120V AC, Single Phase—Without Thermal Overload Protection | |||||||||||||||||||||
| Plug In | 2.3 | 2 | 1.5 | 4.6 | 3" | 35 to 160 | 1/200 | 0.5 | Barbed | 3/8" | Male | Barbed | 3/8" | Male | 3 1/4" | 3 3/4" | 4 1/2" | 9971K21 | 0000000 | ||
| Plug In | 3 | 2.6 | 1.8 | 4.6 | 3" | 35 to 160 | 1/200 | 0.5 | Barbed | 1/2" | Male | Barbed | 1/2" | Male | 3 1/4" | 3 3/4" | 4 1/2" | 9971K11 | 000000 | ||
Pipe
|
Max. Flow Rate, gpm | Intake | Discharge | Overall | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Electrical Connection Type | @ 0 Ft. of Head | @ 1 Ft. of Head | @ 3 Ft. of Head | Max. ft. of Head, ft. | Removes Water Down To | Temp. Range, ° F | Power, hp | Current, amp | Connection | Pipe Size | Thread Type | Gender | Connection | Pipe Size | Thread Type | Gender | Ht. | Wd. | Dp. | Each | |||
120V AC, Single Phase—Without Thermal Overload Protection | |||||||||||||||||||||||
| Plug In | 3 | 2.6 | 1.8 | 4.6 | 3" | 35 to 160 | 1/200 | 0.5 | Threaded | 1/4 | NPT | Male | Threaded | 1/4 | NPT | Male | 3 1/4" | 3 3/4" | 4 1/2" | 9971K31 | 0000000 | ||
Oil-Free DC Electric Air Compressor/Vacuum Pumps
 |  |
Style A | Style B |
Generate only as much compressed air or vacuum as you need for precise control in low-flow applications. These pumps deliver a stable output without large fluctuations, so they’re an energy efficient choice. Use a vehicle battery or a DC generator (both not included) to power them. Since they don't require lubrication, there’s no risk of oil contamination in the air.
These pumps come with two ports: one for pressure and one for vacuum. To switch from an air compressor to a vacuum pump, disconnect from the outlet port and connect to the inlet. Make sure the outlet port is open to atmosphere or vented.
24V DC—NPT Female Inlet and Outlet
|
Style A |
Style A—Style A pumps are built for rugged environments. Use them in a variety of power applications—from air brakes to septic aeration systems. Since they’re manually actuated and lack a relief valve, you’ll need to monitor their operation to prevent pressure buildup.
Overall | Pipe Size | Controller | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Max. Pressure, psi | Max. Flow Rate @ Pressure | Vacuum Rating, in. Hg | Power, hp | Full Load Current, amp | Volume (Sound), dBA | Lg. | Wd. | Ht. | Temp. Range, ° F | Inlet | Outlet | Mounting Location | Ht. | Wd. | Dp. | Lubricant Req. | Actuation | Features | Each | |||
Style A—Wire Lead Connection | ||||||||||||||||||||||
Without Relief Valve | ||||||||||||||||||||||
| 125 | 1.14 ft³/min @ 125 psi | 27 | 1/2 | 21.6 | 66 | 9 9/16" | 5" | 7 1/16" | 45 to 100 | 1/4 | 1/4 | Surface | 6 1/2" | 2 5/8" | 4" | No | Manual | Motor Speed Controller | 8244N121 | 000000000 | ||
24V DC—BSPT Female Inlet and Outlet
|
Style B |
Style B—Style B pumps generate air for delicate suction and gripping common in robots, medical devices, and industrial automation. A digital pressure switch and relief valve automatically turn them on or off based on pressure levels. Use the included brackets to mount their controller on a 35 mm DIN rail.
Overall | Pipe Size | Controller | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Max. Pressure, psi | Max. Flow Rate @ Pressure | Vacuum Rating, in. Hg | Power, hp | Full Load Current, amp | Volume (Sound), dBA | Lg. | Wd. | Ht. | Temp. Range, ° F | Inlet | Outlet | Mounting Location | Ht. | Wd. | Dp. | Lubricant Req. | Actuation | Features | Each | |||
Style B—Lever-Clamp-Terminal Wire Connection | ||||||||||||||||||||||
With Relief Valve | ||||||||||||||||||||||
| 79 | 0.35 ft³/min @ 79 psi | 20 | 1/8 | 4.5 | 55 | 6 1/16" | 3 15/16" | 5 1/4" | 45 to 100 | 1/8 | 1/8 | DIN Rail | 7 1/8" | 4 5/16" | 1 13/16" | No | Pressure, Vacuum | Digital Pressure Switch | 8265N122 | 000000000 | ||
Submersible/Open-Air Pumps for Water
 |
These pumps can be submerged or connected remotely to a pipe in your line. Use them to circulate water in small tanks, cooling baths, fountains, and other low-flow applications. Plug in to activate. Do not run dry. Not for use with salt water or flammable liquids.
Max. Flow Rate, gpm | Intake | Discharge | Overall | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
@ 1 Ft. of Head | @ 5 Ft. of Head | Max. ft. of Head, ft. | Temp. Range, ° F | Power, hp | Current, amp | Pipe Size | Thread Type | Gender | Pipe Size | Thread Type | Gender | Cord Lg., ft. | Ht. | Wd. | Dp. | Each | |||
120V AC, Single Phase—With Thermal Overload Protection | |||||||||||||||||||
Plug In | |||||||||||||||||||
| 2.8 | 1.7 | 7 | 35 to 120 | 1/125 | 0.6 | 1/4 × 1/2 | NPT × NPT | Female × Male | 1/4 | NPT | Male | 10 | 3 3/8" | 3 3/4" | 2 3/4" | 4182K25 | 0000000 | ||
Any-Direction Constant-Flow-Rate Diaphragm Pumps for Water and Coolants
 |
Use these pumps to move caustics such as antifreeze and salt water. They have a fractional horsepower motor rated for intermittent use (return to room temperature before restarting). Mount these pumps in any position, even upside down. They are typically used for low-flow spraying, draining, and washdown applications. Pumps are self-priming, which means they create a suction force to draw liquid upward. They can run dry and do not require an initial fill, so they’re a good choice for applications without a constant flow of liquid. Do not use with solids.
Pressure Switch—Pumps with a pressure switch automatically shut off the pump at the maximum pressure.
Intake | Discharge | Overall | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Max. Flow Rate, gpm | Flow Rate @ Pressure | Max. Pressure, psi | Max. Viscosity, cP | Max. Temp., ° F | Power, hp | Current, amp | Connection | Gender | For Tube ID | Connection | Gender | For Tube ID | Lg. | Wd. | Ht. | Each | |||
120V AC, Single Phase—With Thermal Overload Protection and With Pressure Switch | |||||||||||||||||||
Plug In | |||||||||||||||||||
| 4 | 2.50 gpm @ 30 psi | 60 | 250 | 130 | 3/16 | 1.3 | Barbed | Male | 1/2" | Barbed | Male | 1/2" | 11 1/4" | 5 1/2" | 5 1/8" | 2487K12 | 0000000 | ||
