A compact and economical alternative to standard battery terminal crimpers. Raise the pin to place battery cable and terminal in the slot, then hammer the top of the pin to crimp.

The ratchet applies the correct pressure to ensure a complete crimp every time. The dies are built into the rotating head.

No dies to buy or change—this tool has settings you adjust for different compression connector sizes. A reference chart on the tool shows you the correct settings, which you adjust with the turn of a single screw. The head has a flat surface for standing the tool up. The handles telescope 13” for increased leverage.

Make quick, consistent crimps from connector to connector with these battery-powered crimpers. They are faster and require less effort than ratcheting crimpers—just press the trigger to crimp. Switch out the dies to make crimps on a wide range of connector sizes. A pressure sensor monitors the force of each crimp and alerts you if the pressure is too low to make a complete connection. Connect these tools to a mobile app using Bluetooth to change settings and view usage data. You can also view the pressure level, battery life, and other diagnostics on the display. The head rotates 350°, so you can position these tools to crimp at difficult angles. An LED light on the front illuminates your workspace.

Pair them with a crimping die (sold separately) that matches the size and type of your connector. Insert the cable into the connector, line up the connector with the crimping die, and press the trigger to crimp. Jaws open automatically when you release the trigger. These crimpers create UL-certified connections when paired with connectors from Anderson, Blackburn, Burndy, Ilsco, Panduit, Penn-Union, and Thomas & Betts (T & B).

Cannot Be Sold Outside United States—Replacement batteries and chargers cannot be sold outside the United States due to product regulations.

Save time and energy crimping across different connector sizes in high-volume applications—these battery-powered tools crimp without you having to change out any dies. Instead, they automatically adjust to the size of your connector. They’re faster than ratchet crimpers and because they activate with the press of a trigger, there’s less repetitive motion. A built-in pressure sensor monitors the force of each crimp to make sure the connection is complete every time. If the pressure is too low, you’ll hear a beep and see an LED flash. Connect these crimpers to your mobile device using Bluetooth to change settings and view usage data from an app. You can also check the pressure level, battery level, and other diagnostics from the LCD display on the crimper. The head rotates 350°, so you can maneuver these tools to crimp at difficult angles. An LED light on the front illuminates your workspace.

These crimpers create UL-certified connections when paired with connectors from Anderson, Blackburn, Burndy, Ilsco, Panduit, Penn-Union, or Thomas Betts (T&B).

Cannot Be Sold Outside United States—Replacement batteries and chargers cannot be sold outside the United States due to product regulations.

The high-pressure pumping system in these crimpers creates enough force to crimp large copper and aluminum lugs. They come with a replaceable pressure cartridge that lasts for 10,000 to 12,000 compressions. They crimp using dies, so they crimp a wider range of lug sizes and are less complicated than dieless crimpers. The head swivels 180°.

Dies are required. These crimpers accept U-type dies for Alcoa, Burndy, Panduit, T&B, and Blackburn 12-ton tools. We list lug markings for two common manufacturers to help choose the correct die for your compression lug.

The high-pressure pumping system in these crimpers creates enough force to crimp large copper and aluminum lugs without using dies. Instead of dies, adjust the settings for different compression connector sizes. The head rotates 350° so you can crimp at any angle and maneuver these tools in tight spaces. Each crimper includes 10 test kits for periodically testing that the pumping system activates at the proper pressure.

With just one tool, you can strip Ethernet cable and crimp connectors onto it.