Illuminate machines and monitor processes where flammable and combustible gases, dust, or fibers are present—from paint spray booths to chemical plants. These lights have an enclosure that contains sparks, flashes, and explosions. They're rated for use in NEC Class I, II, and III, Division 1 hazardous locations. They have a T6 (185° F) temperature classification, which certifies their surface stays cool enough to avoid igniting flammable material. Rated IP67, they're also sealed against dust and temporary submersion.

Hardwire to the terminal strips inside the junction box at the end of the light. They're factory sealed, so no additional sealing is required. The included mounting bracket swivels to aim light where you need it.

Bring light to explosion-prone work areas. Rated NEC Class I, these lights are safe to use in areas with ignitable concentrations of flammable or combustible gases, vapors, and liquids. The housing of these lights contains fire and sparks, so they don’t ignite what’s in your environment. They’re often used in mines and underground drilling. All also meet NEMA 4X, meaning they withstand spraying liquid, resist corrosion, and keep out dust. Use the hook to hang them where you need them. These lights come with a standard three-prong plug, so electrical connections must be made outside of the hazardous environment. Alternatively, you can add a hazardous location plug.

Safely light up large spaces where combustible gases and dust are normally present. Rated NEC Class I and II, these lights have a housing that contains any sparks or flames and seals out ignitable gases, vapors, and dust. They’re rated T5, an NEC hazardous location temperature classification. This means their surface temperature stays below 212° F to prevent them from reacting with nearby flammable substances. Made of lightweight, durable aluminum with a tempered glass lens, they withstand bumps and rough handling. They’re often used in chemical processing, refineries, and paint spray booths.

Unless noted, the plug and power supply on these lights are outdoor rated but are not explosion-proof rated. Electrical connections must be made outside the hazardous environment.

Aim light where you need it—even in explosion-prone spaces—by raising, lowering, and tilting these lights on their tripod. Rated NEC Classes I, II, III, and Zone 0, they’re safe to use near ignitable concentrations of flammable or combustible gas, dust, or fibers. Intrinsically safe, they’re designed not to create enough heat or sparks to trigger an explosion.

They’re durable enough to fall from 6 ft. and still work. The polycarbonate lens resists impact, and the sturdy steel body has rubber cushioning on the edges. Rated IP67, they’re completely dust tight and can be submerged in water and still work. They’re also tested against ANSI/PLATO FL 1 standards to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Set these cordless lights up on the included tripod or mount them using the hook on the back or the magnet on the base. You can set these lights up quickly and move them elsewhere at a moment’s notice. The hook makes it easy to carry them around your jobsite and the carrying case fits both the light and the tripod.

Flood hazardous areas with light—these lights are intrinsically safe, meaning they can’t cause an explosion or fire. Rated NEC Class I, II, III, and Zone 0, they’re safe to use in areas with ignitable concentrations of flammable or combustible gases, dust, and fibers. They’re often used in refineries, mines, and paint booths. Pivot their head up and down to direct light where you need it most. These lights are rechargeable, compact, and include a carrying case for easy transport to jobsites without power.

They’re durable enough to fall from 6 ft. and still work. The edges of the metal body are cushioned with rubber, and the lens is impact-resistant polycarbonate. Rated IP67, they are sealed against dust and water. You can drop them in water, and they’ll keep working. These lights are tested against ANSI/PLATO FL 1 standards to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Mount them using the extendable swivel hook on the back or the magnet in the base. The hook also functions as a carrying handle. Add a tripod (sold separately) if there’s nowhere to mount the light and you need to position it higher than on the ground.