Filter by
Container Type
Additive
Container Size
REACH
RoHS
Export Control Classification Number (ECCN)
U.S.–Mexico–Canada Agreement (USMCA) Qualifying
DFARS Specialty Metals
Moisture-Resistant Bearing Grease
 |  |  |  |
Can | Pail | Tube | Grease Gun Cartridge |
Made with moisture-resistant thickeners, this grease stays in place in wet environments. It is wear resistant for use in a wide range of bearings.
Grease lubricates most efficiently within the listed temperature range.
Polyurea Thickener—Grease with polyurea thickener has excellent heat resistance and good moisture and oxidation resistance.
2 NLGI Grade—NLGI 2 is about the consistency of peanut butter.
Mineral Oil Base—Mineral-oil-based grease, derived from petroleum, is usually more economical than synthetic-oil-based grease.
PTFE Additive—Grease with PTFE has small particles of PTFE that reduce friction and help the grease maintain its lubricity.
Melting Temperature—Melting temperature is the point at which grease will fail and run out of equipment, leaving it to run dry.
Container | Temp., ° F | Each | Package | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
NLGI Consistency Grade | Base Oil | Additive | Size | Net Wt., lb. | Type | Min. | Max. | Melting Temp., ° F | Color | Each | Pkg. Qty. | Pkg. | ||||
Polyurea Thickener | ||||||||||||||||
| 2 | Mineral Oil | PTFE | — | 1 | Can | -35 | 455 | 500 | Green | 1243K12 | 000000 | 6 | 1243K121 | 0000000 | ||
| 2 | Mineral Oil | PTFE | 3/4 fl. oz. | — | Tube | -35 | 455 | 500 | Green | 1243K31 | 0000 | 24 | 1243K311 | 000000 | ||
| 2 | Mineral Oil | PTFE | 14 1/2 fl. oz. | — | Grease Gun Cartridge | -35 | 455 | 500 | Green | 1243K11 | 00000 | 16 | 1243K113 | 000000 | ||
| 2 | Mineral Oil | PTFE | 1 gal. | — | Pail | -35 | 455 | 500 | Green | 1243K13 | 000000 | 6 | 1243K131 | 000000 | ||
| 2 | Mineral Oil | PTFE | 5 gal. | — | Pail | -35 | 455 | 500 | Green | 1243K14 | 000000 | — | ——— | 0 | ||
Moisture-Resistant Grease
 |
 |
Can |
Keep metal parts lubricated in damp environments. Often used in paper manufacturing or water management facilities, this grease stays put even when it gets wet.
Thickener—Added for a more solid consistency, thickener also increases the heat and moisture resistance of grease. Choose grease with a thickener that’s best for your application. Lithium is a general purpose thickener. Calcium sulfonate and aluminum resist oxidation, which keeps the grease from hardening when it’s exposed to air for long periods. Calcium sulfonate resists higher heat than aluminum. Silica withstands the widest range of temperatures.
NLGI Consistency Grade—The higher the grade, the thicker the grease. Lower grades are best for cold temperatures and lubrication systems where grease needs to flow. Grade 0 is about the consistency of mustard. Grade 1 feels similar to tomato paste. Grade 2 is about as thick as peanut butter.
Base Oil—The foundation of a grease. Mineral oil is more economical, but synthetic oil lasts longer and performs better at extreme temperatures.
Additive—Boost the performance of the grease. Boron nitride creates a dry film that won’t wash out, even in salt water. Molybdenum disulfide holds up to extreme pressure and heavy wear. PTFE reduces friction to help parts slide easily. Zinc alloy neutralizes acid. It’s a safe replacement for lead.
Melting Temperature—When grease melts, it runs out of equipment and leaves it dry. Once melted, it won’t regain its original consistency. Choose a grease with a melting temperature that’s higher than your maximum operating temperature.
