ISO 9934 Magnetic Particles

Filter by

Color

Black

Fluorescent Light Green

Container Type

Form

Visibility

For Use On

Solution Type

Military Specification

Particle Size

Minimum Application Temperature

Minimum Temperature

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Container Net Weight

10.5 oz.

12.2 oz.

10 lb.

Maximum Application Temperature

120° F

500° F

600° F

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

REACH

RoHS

Maximum Temperature

Specifications Met

Spray Position

Help me decide (beta)

5 Products

...

Magnetic Particles for Flaw Detection


Powder	Sprays

Red

Yellow

Black

Fluorescent

Light Green

Reveal imperfections both at and slightly below the surface of your metal part, unlike other flaw detection methods. Use these particles with a magnetic yoke to check for faulty seams, welding defects, and fatigue cracks to make sure metal parts will be safe under high stress. The yoke creates a magnetic field that draws the particles towards flaws, making them easy to spot. To prevent issues with other inspections down the line, make sure to fully demagnetize your part to remove all the particles.

Powder—Powder particles withstand higher temperatures than spray particles and are quick to use. They don’t need to dry, which means you can start testing immediately. Shake them out from a bottle or use a powder blower to apply them to your part. You can blow excess particles off even if your part is still magnetized. They come in different colors, so choose what will contrast best with your metal surface.

Sprays—When testing round or hard-to-reach material, it’s easier to apply an even layer of spray particles than powder. They’re smaller than powder particles, so they’re good for detecting finer surface flaws and imperfections.

Water-Based Spray—Water-based spray particles are easier to clean up than oil-based spray particles.

Ultraviolet—Ultraviolet spray particles require a UV light, but stand out more than natural light particles, so you spend less time examining each part. For the best contrast, use these particles in dim lighting.

Black—Black spray particles are often used with white contrast paint to make flaws more visible.

360° Sprayer—Particles with a 360° sprayer won’t sputter or spatter even when the aerosol can is upside down, so you can coat parts evenly without straining your wrist.

				Container			Application Temp. Range
	For Use On	Visibility	Color	Net Wt.	Type	Particle Size, μm	Min.	Max., ° F	Features	Specs. Met	Mil. Spec.		Each
Powder



		Cobalt, Iron, Nickel, Stainless Steel, Steel	Natural Light	Red	10 lb.	Pail	80	Not Rated	600	—	ASTM E1444, ISO 9934	MIL-STD-2132, MIL-STD-271, NAVSEA 250-1500-1, NAVSEA T9074-AS-GIB-010/271	1394T373	0000000


		Cobalt, Iron, Nickel, Stainless Steel, Steel	Natural Light	Yellow	10 lb.	Pail	80	Not Rated	500	—	ASTM E1444, ISO 9934	MIL-STD-2132, MIL-STD-271, NAVSEA 250-1500-1, NAVSEA T9074-AS-GIB-010/271	1394T101	000000


		Oil-Based Spray



				Cobalt, Iron, Nickel, Stainless Steel, Steel	Natural Light	Black	10.5 oz.	Aerosol Can	2	45° F	120	360° Sprayer	ASTM E1444, ISO 9934	MIL-STD-2132, NAVSEA 250-1500-1, NAVSEA T9074-AS-GIB-010/271	9413N102	00000


				Cobalt, Iron, Nickel, Stainless Steel, Steel	Ultraviolet	Fluorescent Light Green	10.5 oz.	Aerosol Can	6	55° F	120	—	ASTM E1444, ISO 9934	MIL-STD-2132, MIL-STD-271, NAVSEA 250-1500-1, NAVSEA T9074-AS-GIB-010/271	9413N13	00000


				Water-Based Spray



						Cobalt, Iron, Nickel, Stainless Steel, Steel	Natural Light	Black	12.2 oz.	Aerosol Can	2	25° F	120	—	ISO 9934	MIL-STD-2132, NAVSEA 250-1500-1, NAVSEA T9074-AS-GIB-010/271	9413N101	00000